NETI-CHMGR-MIB

All MIBs › NETI-CHMGR-MIB

Organization: Net Insight AB

Last Updated: 2015-01-08

Category: Hardware Inventory

Description: Manages Net Insight Nimbra chassis slot configuration, card presence, and hardware inventory.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NETI-CHMGR-MIB?

NETI-CHMGR-MIB is the Channel Manager MIB for Net Insight's Nimbra media transport network elements, providing a service-independent abstraction for managing connections and channels regardless of the specific service (video, audio, data) riding over them. It exposes configuration and descriptive data about objects managed by the channel manager: descriptor tables carrying capabilities, customer ID, service reference, acceptable/requested bandwidth (bps), and slot allocation for each channel object. While primarily a connection/service-provisioning MIB, it is used to monitor the operational and capacity status of transport channels, for example whether requested bandwidth and slots for a service could actually be granted, functioning as a software/service-health check on the node. It includes a notifications (trap) branch (chmgrNotifications), indicating it also reports fault/change events for channel objects. It is deployed within Net Insight Nimbra chassis used for broadcast and professional media transport networks, where operators need cross-service visibility into channel capacity and allocation, and administrators can download the NETI-CHMGR-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NETI-CHMGR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Net Insight Nimbra media transport chassis

Monitoring Examples

An operator would poll chmgrODescriptionTable/chmgrODescriptionEntry for a given chmgrODescrIndex to compare chmgrODescrRequestedBps and chmgrODescrRequestedSlots against chmgrODescrAcceptableBps and chmgrODescrAcceptableSlots, confirming a media channel got the bandwidth/slot allocation it needed. If requested values exceed acceptable values, the entry reveals a capacity shortfall that would cause a media flow to fail to establish. chmgrODescriptionTimeStamp lets the operator confirm how recently the channel descriptor was updated, useful for detecting stale provisioning state, and chmgrNotifications would fire an alert if the channel's status changed unexpectedly.

What Can Be Monitored

channel descriptor capabilities
requested vs. acceptable bandwidth (bps)
requested vs. acceptable slot allocation
customer/service reference per channel
channel descriptor last-changed timestamp

Imported Objects

From NETI-COMMON-MIB

netiExperimentalGeneric

OBJECT-IDENTITY

From NETI-DTM-MIB

DtmAddress

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-SMI

Counter32
Counter64
Gauge32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
RowPointer
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using chmgrOStatDcap1Octets OID:

Select a Net Insight media transport chassis as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type chmgrOStatDcap1Octets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The total number of out-bound octets (bytes) on the connection. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
netiChmgrMIB	1.3.6.1.4.1.2928.6.2.14			MIB for the Channel Manager. The Channel Manager is a function that manages connections and their channels in a consistent manner, independently of the service that uses the connection. The Channel Manager provides a common method to configure the connections, and to present data about the connections and channels that exist.
chmgrObjects	1.3.6.1.4.1.2928.6.2.14.1
chmgrODescriptionGroup	1.3.6.1.4.1.2928.6.2.14.1.1
TIM chmgrODescriptionTimeStamp	1.3.6.1.4.1.2928.6.2.14.1.1.1	TimeStamp	read-only	Time stamp when any data in any of the tables in this group were last updated.
chmgrODescriptionTable	1.3.6.1.4.1.2928.6.2.14.1.1.2		not-accessible	Descriptions on originating connections. The creation and deletion of rows in the table is done by the application that provides the service on the connection. When a row is deleted, the associated rows in the destination table chmgrODescrDestinationTable and channel table chmgrODescrChannelTable are also deleted. The table contains information about the capabilities of the connections as well as the actual configuration of the connections. As the capabilities depends on the type of service, it is the service's application that is responsible for defining these. Changes made on a row in the table will take immediate effect. This could result in a re-establishment of the channel(s) using the new parameters.
chmgrODescriptionEntry	1.3.6.1.4.1.2928.6.2.14.1.1.2.1		not-accessible	An entry in the table is representing the description and configuration of one connection.
U32 chmgrODescrIndex	1.3.6.1.4.1.2928.6.2.14.1.1.2.1.1	Unsigned32	not-accessible	Index for this entry.
INT chmgrODescrType	1.3.6.1.4.1.2928.6.2.14.1.1.2.1.2	INTEGER	read-only	This is the unique connection type identifier that defined the type of service that the connection description describes. ets(1). Ethernet Transport Service (DTM LAN Transport). its(2). Isochronous Transport Service (DTM Isochronous Transport). dle(3). DTM LAN Emulation.
BIT chmgrODescrCapabilities	1.3.6.1.4.1.2928.6.2.14.1.1.2.1.3	Bits	read-only	Connection capabilities that indicate which parameters that are possible to configure in this connection description. allowCapacityInterval(0) Allows the configuration of capacity to have different values on requested and accepted capacity. destination(1) Describes if destinations shall be configured for this description. This is the normal case for most connections, but is some cases, the destination is decided by the application that is responsible for the service on the connection. allowDynamicCapacity(2) Allows the use of dynamic capacity adjustment. isMulticast(3) Describes if the connection is a multicast connection. This value is set by the application that is responsible for the service that uses the connection. allowEstablish(4) Allows the configuration of whether the connection shall be established using the capacity configurations of the connection or not. allowProtection(5) Allows the connection to be configured to be 1+1 protected by using two channels for the connection. allowReestablish(6) Allows configuration of the re- establishment algorithm. allowScheduling(7) Allows an external application, such as a scheduled, to alter the capacity and administrative state of the connection. allowSourceRoute(8) Allows configuration of source routed connections. requireCapacity(9) Requires the configuration of capacity. This is the normal case for most connections, but in some cases, the capacity is defaulted by the application. allowAlternative(10) Allows configuration of several alternative destinations. The unicast connection will be established using only one of the available destination. allowZeroCapacity(11). Allows configuration of zero capacity.
U32 chmgrODescrCustomerId	1.3.6.1.4.1.2928.6.2.14.1.1.2.1.4	Unsigned32	read-only	This is a customer identifications number assigned by the application that is providing the service on the connection. The object has no functional use except to provide the information.
NUM chmgrODescrServiceReference	1.3.6.1.4.1.2928.6.2.14.1.1.2.1.5	RowPointer	read-only	This is a pointer to the application or service that owns this connection description, and that is responsible for the capabilities.
G32 chmgrODescrAcceptableBps	1.3.6.1.4.1.2928.6.2.14.1.1.2.1.6	Gauge32	read-write	The minimum payload capacity in bits per second for the service using the channel. If it is not possible to allocate this capacity, a channel will not be established. If the acceptable capacity is larger than the maximum value (4,294,967,295) bits per second, then the `chmgrODescrAcceptableMbps' must be used. If the capacity is greater than the maximum value of this object, then the this object should report the maximum value.
G32 chmgrODescrAcceptableSlots	1.3.6.1.4.1.2928.6.2.14.1.1.2.1.7	Gauge32	read-only	The minimum capacity in number of 512 kbps DTM slots. The value is based on the chmgrAcceptableBps and the necessary overhead required by the service for delivering the payload capacity. The overhead is calculated by the service application.
G32 chmgrODescrRequestedBps	1.3.6.1.4.1.2928.6.2.14.1.1.2.1.8	Gauge32	read-write	The requested payload capacity in bits per second for the service using the channel. If the requested capacity is larger than the maximum value (4,294,967,295) bits per second, then the `chmgrODescrRequestedMbps' must be used. If the capacity is greater than the maximum value of this object, then the this object should report the maximum value.
G32 chmgrODescrRequestedSlots	1.3.6.1.4.1.2928.6.2.14.1.1.2.1.9	Gauge32	read-only	The requested capacity in number of 512 kbps DTM slots. The value is based on the chmgrRequestedBps and the necessary overhead required by the service for delivering the payload capacity. The overhead is calculated by the service application.
INT chmgrODescrReestablishMethod	1.3.6.1.4.1.2928.6.2.14.1.1.2.1.10	INTEGER	read-write	The type of algorithm or method used to re-establish channels that for some reason fail to be established or is torn down. The methods are: exponential(1) Establishment attempts are done at time interval that is doubled for each attempt, starting at chmgrMinInterval and increased to a maximum of chmgrMaxInterval, until a channel is successfully established. The value is only valid if the allowReestablish(6) bit in chmgrODescrCapabililties is set.
G32 chmgrODescrMinInterval	1.3.6.1.4.1.2928.6.2.14.1.1.2.1.11	Gauge32	read-write	The minimum time in milliseconds between two attempts to establish the channel.
G32 chmgrODescrMaxInterval	1.3.6.1.4.1.2928.6.2.14.1.1.2.1.12	Gauge32	read-write	The maximum time in milliseconds between two attempts to establish the channel. This value must be larger than chmgrODescrMinInterval.
T/F chmgrODescrEstablish	1.3.6.1.4.1.2928.6.2.14.1.1.2.1.13	TruthValue	read-write	Describes if the connection shall be established with the defined parameters. The value is only valid if the allowEstablish(4) bit in chmgrODescrCapabilites is set. true(1) The connection is established. false(2) The connection is not established. The establishment of the connection is controlled by some other function outside the scope of this MIB. This could be a scheduler or timer specified in other MIB's.
U32 chmgrODescrNextDestTableIndex	1.3.6.1.4.1.2928.6.2.14.1.1.2.1.14	Unsigned32	read-only	The value of the next available index for this connection description in the chmgrODescrDestinationTable.
T/F chmgrODescrPrecedence	1.3.6.1.4.1.2928.6.2.14.1.1.2.1.15	TruthValue	read-write	A channel with precedence is established and torn down before any channel without precedence. true(1) The channel has precedence. false(2) The channel does not have precedence.
BIT chmgrODescrSuppressAlarms	1.3.6.1.4.1.2928.6.2.14.1.1.2.1.16	Bits	read-write	Suppress generation of some alarms: route(0) Alarm raised if a service is not using its primary source route.
G32 chmgrODescrAcceptableMbps	1.3.6.1.4.1.2928.6.2.14.1.1.2.1.17	Gauge32	read-write	The minimum payload capacity in units of 1,000,000 bits per second for the service using the channel. If it is not possible to allocate this capacity, a channel will not be established. This object must be used when requesting a capacity larger than 4,294,967,295 bits per second. If a lower capacity is requested, then it is possible to use `chmgrODescrAcceptableBps'.
G32 chmgrODescrRequestedMbps	1.3.6.1.4.1.2928.6.2.14.1.1.2.1.18	Gauge32	read-write	The requested payload capacity in units of 1,000,000 bits per second for the service using the channel. This object must be used when requesting a capacity larger than 4,294,967,295 bits per second. If a lower capacity is requested, then it is possible to use `chmgrODescrRequestedBps'.
DCP chmgrODescrRequestedDcpVersion	1.3.6.1.4.1.2928.6.2.14.1.1.2.1.19	DcpVersion	read-write	The DCP version that should be used for channel established for this connection. `any' means try with DCP3 first and revert to DCP2 if unsuccessful because of node version mismatch.
T/F chmgrODescrOneHopSpareCapUtilization	1.3.6.1.4.1.2928.6.2.14.1.1.2.1.20	TruthValue	read-write	Specifies if the the channel shall dynamically allocate spare capacity. When `true', then the channel is initially established with the acceptable capacity specified in chmgrODescrAcceptableBps (or chmgrODescrAcceptableMbps). The channel capacity is then monitored and automatically increased with available capacity up to the capacity specified in chmgrODescrRequestedBps (or chmgrODescrRequestedMbps). If another channel would request capacity, then the capacity of this channel is reduced as needed by the other channel, but not below the acceptable capacity. When set to `false', then spare capacity will not be used. This function requires use of DCP3, see chmgrODescrRequestedDcpVersion. This function requires use of ETS unicast. This function requires the channel destination to be a neighboring node.
chmgrODescrDestinationTable	1.3.6.1.4.1.2928.6.2.14.1.1.3		not-accessible	The table describes destinations for a connection. A unicast connection can normally only have one destination, while a multicast connection may have several destinations. If a unicast connection allows alternative destinations, as defined by the allowAlternative(10) bit in chmgrODescrCapabilities, it is allowed to define multiple destinations. At channel establishment, the destinations will be tried in succession until a channel is successfully established. It is possible to add, change and delete destinations while the connection is active. For a unicast connection, a changed destination is torn down as soon as it is changed, and established as soon as the changed information contains valid data. For a multicast connection, it is possible to add and delete destinations to an already established connection without affecting the connection to the other destinations. An added destination will be established as soon as it includes valid information, and will be re-established as soon as the information is changed. Note that a destination address with an empty string can be used to disable the destination. For a multicast connection a single destination can also be enabled and disabled using its administrative status. The bits allowAlternative(10), destination(1) and allowMulticast(3) in chmgrODescCapabilities describes if and how it is allowed to add a destination to a connection.
chmgrODescrDestinationEntry	1.3.6.1.4.1.2928.6.2.14.1.1.3.1		not-accessible	An entry in the table represents one destination.
U32 chmgrODescrDestIndex	1.3.6.1.4.1.2928.6.2.14.1.1.3.1.1	Unsigned32	not-accessible	The index for this entry.
DTM chmgrODescrDestAddress	1.3.6.1.4.1.2928.6.2.14.1.1.3.1.2	DtmNode	read-create	The DTM address for a destination termination point of the connection. The empty string indicates an unconfigured destination. The address should be the last object to configure to avoid unnecessary channel establishment while configuring the destination.
DST chmgrODescrDestDsti	1.3.6.1.4.1.2928.6.2.14.1.1.3.1.3	Dsti	read-create	The DSTI (DTM Service Type Instance) for the destination termination point of the connection.
ROW chmgrODescrDestRowStatus	1.3.6.1.4.1.2928.6.2.14.1.1.3.1.4	RowStatus	read-create	See SNMPv2-TC. The following values are supported: active(1) The object always reads active(1). createAndGo(4) A new conceptual row is created representing a new destination. destroy(6) The conceptual row representing the destination is deleted, and the connection to the destination is torn down. Connections to other destinations are not affected. Associated rows in the channel table chmgrODescrChannelTable will also be destroyed.
INT chmgrODescrDestAdminStatus	1.3.6.1.4.1.2928.6.2.14.1.1.3.1.5	INTEGER	read-create	The administrative state of the destination. The value controls the desired state of the multicast connection to the destination. up(1). The connection shall be established to the destination. down(2). No connection shall be established to the destination.
chmgrODescrChannelTable	1.3.6.1.4.1.2928.6.2.14.1.1.4		not-accessible	The table describes relationships between destinations defined in the chmgrODescrDestinationTable, channels and source routes. To make a connection to a destination 1+1 protected, create two rows representing the two channels in the table. Note that this is only allowed if the bit allowProtection(5) is set in chmgrODescrCapabilities. If no conceptual row exists for a destination, it is assumed that there shall be only one channel to the destination and that no source route is shall be used. A channel to a destination may have its route through the DTM networks defined by one or many source routes. If multiple source routes are defined, any one of these source routes is chosen when the channel is established.
chmgrODescrChannelEntry	1.3.6.1.4.1.2928.6.2.14.1.1.4.1		not-accessible	An entry in this table represents the relationship between one channel in the connection (defined in chmgrODescrDestinationTable) and one source route (defined in chmgrSourceRouteTable).
U32 chmgrODescrChanIndex	1.3.6.1.4.1.2928.6.2.14.1.1.4.1.1	Unsigned32	not-accessible	The index of the channel used by the connection.
U32 chmgrODescrChanSourceRouteIndex	1.3.6.1.4.1.2928.6.2.14.1.1.4.1.2	Unsigned32	not-accessible	The index of the row describing the relationship to one source route.
U32 chmgrODescrChanSourceRoute	1.3.6.1.4.1.2928.6.2.14.1.1.4.1.3	Unsigned32	read-create	The index in the chmgrOSourceRouteTable representing the desired source route for the channel to the destination. If no source route shall be used by the channel for this destination, delete the conceptual row or set the value to the max value (4294967295).
ROW chmgrODescrChanRowStatus	1.3.6.1.4.1.2928.6.2.14.1.1.4.1.4	RowStatus	read-create	See SNMPv2-TC. The following values are supported: active(1) The object always reads active(1). createAndGo(4) a new conceptual row is created representing a channel is added. destroy(6) The conceptual row representing the channel is deleted.
chmgrTDescriptionGroup	1.3.6.1.4.1.2928.6.2.14.1.2
chmgrSourceRouteGroup	1.3.6.1.4.1.2928.6.2.14.1.3
TIM chmgrSourceRouteTimeStamp	1.3.6.1.4.1.2928.6.2.14.1.3.1	TimeStamp	read-only	Value of sysUpTime when any of the tables in this group were last updated.
chmgrSourceRouteTable	1.3.6.1.4.1.2928.6.2.14.1.3.2		not-accessible	Table listing source routes. A source route is a route through the DTM net that is defined at the source of the channel. The source routes may be used by many connections, making the connections using the same route through the DTM network. A source route may only be updated or deleted when it is not used by any established connection. Note that a source route set up as loose, with no intermediate nodes, and set up to use any outgoing interface is equivalent to a shortest path routing.
chmgrSourceRouteEntry	1.3.6.1.4.1.2928.6.2.14.1.3.2.1		not-accessible	An entry representing one source route.
U32 chmgrSourceRouteIndex	1.3.6.1.4.1.2928.6.2.14.1.3.2.1.1	Unsigned32	not-accessible	The index for this entry.
STR chmgrSourceRouteName	1.3.6.1.4.1.2928.6.2.14.1.3.2.1.2	SnmpAdminString	read-write	A string for administrative use that identifies or describes the source route. The string does not have to be unique.
INT chmgrSourceRouteTypeOfRoute	1.3.6.1.4.1.2928.6.2.14.1.3.2.1.3	INTEGER	read-create	The type of source route that shall be used. strict(1) The channel must only pass the hops defined in the source route. loose(2) The channel must pass all the hops defined in the source route.
U32 chmgrSourceRouteFirstIfBoard	1.3.6.1.4.1.2928.6.2.14.1.3.2.1.4	Unsigned32	read-create	The identity of the board where the DTM interface is located that shall be used for leaving the node. A value of zero (0) means that any board may be used. A DTM interface is identified by a board and a port on that board.
U32 chmgrSourceRouteFirstIfPort	1.3.6.1.4.1.2928.6.2.14.1.3.2.1.5	Unsigned32	read-create	The identity of the port on the board specified in chmgrSourceRouteFirstIfBoard that shall be used for leaving the node. A value of zero (0) means that any port may be used. A DTM interface is identified by a board and a port on that board.
ROW chmgrSourceRouteRowStatus	1.3.6.1.4.1.2928.6.2.14.1.3.2.1.6	RowStatus	read-create	Se SNMPv2-TC. Supports createAndGo(4) and destroy(6). createAndGo(4) A new row is created representing a new source route. destroy(6) A row is deleted. All rows in the chmgrSourceRouteHopTable that describes the route are also deleted. It is not possible to change or delete a source route that is in use by an established channel.
chmgrSourceRouteHopTable	1.3.6.1.4.1.2928.6.2.14.1.3.3		not-accessible	Table describing the nodes and interfaces for intermediate nodes that a source route shall be using.
chmgrSourceRouteHopEntry	1.3.6.1.4.1.2928.6.2.14.1.3.3.1		not-accessible	An entry describes one hop for a source route.
U32 chmgrSourceRouteHopIndex	1.3.6.1.4.1.2928.6.2.14.1.3.3.1.1	Unsigned32	not-accessible	The index for this conceptual row.
DTM chmgrSourceRouteHopAddress	1.3.6.1.4.1.2928.6.2.14.1.3.3.1.2	DtmNode	read-create	The DTM address of the node.
U32 chmgrSourceRouteHopNextIfBoard	1.3.6.1.4.1.2928.6.2.14.1.3.3.1.3	Unsigned32	read-create	The identity of the board where the DTM interface is located that shall be used for leaving the node. A value of zero (0) means that any board may be used. A DTM interface is identified by a card and a port on that board.
U32 chmgrSourceRouteHopNextIfPort	1.3.6.1.4.1.2928.6.2.14.1.3.3.1.4	Unsigned32	read-create	The identity of the port on the board specified in chmgrSourceRouteFirstIfCard that shall be used for leaving the node. A value of zero (0) means that any port may be used. A DTM interface is identified by a board and a port on that board.
ROW chmgrSourceRouteHopRowStatus	1.3.6.1.4.1.2928.6.2.14.1.3.3.1.5	RowStatus	read-create	See SNMPv2-TC. The following values are supported: active(1) The object always reads active(1). createAndGo(4) A new conceptual row is created. destroy(6) The conceptual row representing is deleted.
chmgrOConnectionGroup	1.3.6.1.4.1.2928.6.2.14.1.4
TIM chmgrOConnectionTimeStamp	1.3.6.1.4.1.2928.6.2.14.1.4.1	TimeStamp	read-only	The value of sysUpTime when any of the tables in the group were last changed.
chmgrOConnectionTable	1.3.6.1.4.1.2928.6.2.14.1.4.2		not-accessible	The table lists all the originating connections. The connections are configured in the chmgrODescriptionTable.
chmgrOConnectionEntry	1.3.6.1.4.1.2928.6.2.14.1.4.2.1		not-accessible	An entry in the table representing one originating connection.
U32 chmgrOConnIndex	1.3.6.1.4.1.2928.6.2.14.1.4.2.1.1	Unsigned32	not-accessible	The index of the connection in the table.
U32 chmgrOConnCustomerId	1.3.6.1.4.1.2928.6.2.14.1.4.2.1.2	Unsigned32	read-only	This is a customer identification number assigned by the application that is providing the service on the connection. The object has no functional use except to provide the information. This is the same value as chmgrODescrCustomerId.
U32 chmgrOConnODescrIndex	1.3.6.1.4.1.2928.6.2.14.1.4.2.1.3	Unsigned32	read-only	A reference to the chmgrODescriptionTable. It is the index in the chmgrODescriptionTable for the description that describes the configuration of this connection.
NUM chmgrOConnServiceReference	1.3.6.1.4.1.2928.6.2.14.1.4.2.1.4	RowPointer	read-only	A reference to the service responsible for this connection. The object points to the instance of the service in the service's MIB. Its MIB shall have a table representing all the instances of the service.
G32 chmgrOConnAllocatedSlots	1.3.6.1.4.1.2928.6.2.14.1.4.2.1.5	Gauge32	read-only	The number of 512 kbps DTM slots that is allocated by the connection. Note that for a connection with multiple channels, e.g. 1+1 protected connection, all the channels have the same capacity. To know how much capacity that is used by the connection, multiply the value with the number of active channels. The channels are listed in chmgrOChannelTable.
TIM chmgrOConnAllocatedSlotsChanged	1.3.6.1.4.1.2928.6.2.14.1.4.2.1.6	TimeStamp	read-only	The value of sysUpTime when the allocated capacity for the connection was last changed.
DCA chmgrOConnDcapType	1.3.6.1.4.1.2928.6.2.14.1.4.2.1.7	DcapType	read-only	The DCAP (DTM Channel Adaptation Protocol) type for the connection.
DST chmgrOConnDst	1.3.6.1.4.1.2928.6.2.14.1.4.2.1.8	Dst	read-only	The DST (DTM Service Type) of the service that uses the connection.
DTM chmgrOConnSourceAddress	1.3.6.1.4.1.2928.6.2.14.1.4.2.1.9	DtmNode	read-only	The DTM address of the originating node for the connection.
DST chmgrOConnSourceDsti	1.3.6.1.4.1.2928.6.2.14.1.4.2.1.10	Dsti	read-only	The DSTI (DTM Service Type Instance) of the service at the originating node of the connection.
TIM chmgrOConnStatusLastChanged	1.3.6.1.4.1.2928.6.2.14.1.4.2.1.11	TimeStamp	read-only	The value of sysUpTime when the operational status of the connection was last changed.
INT chmgrOConnAdminStatus	1.3.6.1.4.1.2928.6.2.14.1.4.2.1.12	INTEGER	read-only	Information about the administrative state of the connection. The administrative state is controlled by the application that provides the service transported on the connection. The application sets the administrative state to up(1) when a connection shall be established, and down(2) when the connection shall be torn down.
INT chmgrOConnOperStatus	1.3.6.1.4.1.2928.6.2.14.1.4.2.1.13	INTEGER	read-only	The operational state of the connection. In general, the operational state should follow the administrative state, chmgrOConnAdminStatus. up(1) The connection is up to all its destination on all its channels. For a unicast connection, this is the one configured destination. For a multicast connection, this is all the configured connections. For a 1+1 protected connection, this is both the channels. down(2) No channels are established for the connection. partial(3) The connection is partly established. The connection is not established to at least one of its configured destination on at least one of its channels. dormant(5) The establishment of the connection is pending an action from some other entity, e.g. a scheduler. This is not an error state.
INT chmgrOConnReestablish	1.3.6.1.4.1.2928.6.2.14.1.4.2.1.14	INTEGER	read-write	Writing to this object immediately starts to re-establish the connection to all its destinations. The establishment of the connection will be done according to the current network topology and availability. If source routes are defined, the first source route will be tried first. notApplicable(0) Always reads this value. This value cannot be written. reestablish(1) Writing this value reestablishes the connection.
U32 chmgrOConnForceSourceRoute	1.3.6.1.4.1.2928.6.2.14.1.4.2.1.15	Unsigned32	read-write	Writing to this object immediately starts to re-establish the connection to the destinations and channels using the source route specified with the written value. The value written controls which source route to first try when re-establishing the channel. For each destination and channel for the connection, the written value is used as value for the index chmgrODescrChanSourceRouteIndex in the the chmgrODescrChannelTable. If the entry does not exist, or if the source route is already the one that used by the destination and channel, then no action is taken. Otherwise if the entry exists, then the channel for the destination is re-established, where the given source route is first attempted. Reading this always returns the value 0.
DCP chmgrOConnDcpVersion	1.3.6.1.4.1.2928.6.2.14.1.4.2.1.16	DcpVersion	read-only	Version of DCP that is used for this connection. `any(0)' means that a channel is not established.
chmgrODestinationTable	1.3.6.1.4.1.2928.6.2.14.1.4.3		not-accessible	List of destinations per origination connection.
chmgrODestinationEntry	1.3.6.1.4.1.2928.6.2.14.1.4.3.1		not-accessible	An entry represents one destination for a connection.
DTM chmgrODestDestinationAddress	1.3.6.1.4.1.2928.6.2.14.1.4.3.1.1	DtmNode	read-only	The DTM address of a destination node.
DST chmgrODestDestinationDsti	1.3.6.1.4.1.2928.6.2.14.1.4.3.1.2	Dsti	read-only	The DSTI (DTM Service Type Instance) of the service at the destination node.
chmgrOChannelTable	1.3.6.1.4.1.2928.6.2.14.1.4.4		not-accessible	Table that shows the status for all the originating channels, listed per connection and destination.
chmgrOChannelEntry	1.3.6.1.4.1.2928.6.2.14.1.4.4.1		not-accessible	An entry per channel.
U32 chmgrOChanSourceRouteIndex	1.3.6.1.4.1.2928.6.2.14.1.4.4.1.1	Unsigned32	read-only	The source route index that is referring to the source route currently used by the the channel. This is the value of the index chmgrODescrChanSourceRouteIndex in chmgrODescrChannelTable. A value of '0' would mean the 1st configured source route is used, '1' the 2nd, and so on. If no source route is used by the channel, then the value is 4294967295.
CHA chmgrOChanChannelId	1.3.6.1.4.1.2928.6.2.14.1.4.4.1.2	ChannelId	read-only	The identity of the DTM channel. If no channel is established, the value is zero (0).
STR chmgrOChanErrorMessage	1.3.6.1.4.1.2928.6.2.14.1.4.4.1.3	SnmpAdminString	read-only	Contains a message describing the error if the channel is down due to an error. If there are no error, the objects returns an empty string.
DTM chmgrOChanErrorAddress	1.3.6.1.4.1.2928.6.2.14.1.4.4.1.4	DtmNode	read-only	Contains the DTM address if the node that is reporting an error, described in chmgrOChanErrorMessage. If there are no error, the object returns the address 00.00.00.00.00.00.00.00.
INT chmgrOChanOperStatus	1.3.6.1.4.1.2928.6.2.14.1.4.4.1.5	INTEGER	read-only	The operational status of the channel. If the operational status of the connection is up, indicated in chmgrOConnOperStatus, a value of up(1) indicates that the channel is operational, and a value of down(2) indicates that the channel is not operational due to an error. The object chmgrOChanErrorMessage describes the problem. If the operational status of the connection is down, the value of the object is always down.
TIM chmgrOChanStatusChanged	1.3.6.1.4.1.2928.6.2.14.1.4.4.1.6	TimeStamp	read-only	The sysUpTime when the status of the channel to the destination was last established or torn down.
INT chmgrOChanReestablish	1.3.6.1.4.1.2928.6.2.14.1.4.4.1.7	INTEGER	read-write	Writing to this object re-establishes the channel to its destination without affecting other channels or destinations configured for this connection. The establishment of the channel will be done according to the current network topology and availability. If source routes are defined, the first source route will be tried first. notApplicable(0) Always reads this value. This value cannot be written. reestablish(1) Writing this value reestablishes the channel.
chmgrTConnectionGroup	1.3.6.1.4.1.2928.6.2.14.1.5
TIM chmgrTConnectionTimeStamp	1.3.6.1.4.1.2928.6.2.14.1.5.1	TimeStamp	read-only	Time stamp, i.e. the value of sysUpTime when any for the tables in the group was last changed.
chmgrTConnectionTable	1.3.6.1.4.1.2928.6.2.14.1.5.2		not-accessible	Table with termination connections. The table is managed by the applications that provide services transported on the connections.
chmgrTConnectionEntry	1.3.6.1.4.1.2928.6.2.14.1.5.2.1		not-accessible	An entry represents one connection.
U32 chmgrTConnIndex	1.3.6.1.4.1.2928.6.2.14.1.5.2.1.1	Unsigned32	not-accessible	Index for this entry.
U32 chmgrTConnCustomerId	1.3.6.1.4.1.2928.6.2.14.1.5.2.1.2	Unsigned32	read-only	This is a customer identification number assigned by the application that is providing the service on the connection. The object has no functional use except to provide the information.
U32 chmgrTConnNumberOfChannels	1.3.6.1.4.1.2928.6.2.14.1.5.2.1.3	Unsigned32	read-only	The number of channels this connection uses. A 1+1 protected connection uses two channels.
U32 chmgrTConnActiveChannel	1.3.6.1.4.1.2928.6.2.14.1.5.2.1.4	Unsigned32	read-only	The channel that is currently active. This is the index of the channel in the chmgrTChannelTable. If there is no active channel for the connection, the value is zero (0).
NUM chmgrTConnServiceReference	1.3.6.1.4.1.2928.6.2.14.1.5.2.1.5	RowPointer	read-only	A reference to the service responsible for this connection. The object points to the instance of the service in the service's MIB. Its MIB shall have a table representing all the instances of the service.
G32 chmgrTConnAllocatedSlots	1.3.6.1.4.1.2928.6.2.14.1.5.2.1.6	Gauge32	read-only	The number of 512 kbps DTM slots that is allocated by the connection. Note that for a connection with multiple channels, e.g. 1+1 protected connection, all the channels have the same capacity. To know how much capacity that is used by the connection, multiply the value with the number of active channels. The channels are listed in chmgrTChannelTable.
TIM chmgrTConnAllocatedSlotsChanged	1.3.6.1.4.1.2928.6.2.14.1.5.2.1.7	TimeStamp	read-only	The value of sysUpTime when the capacity for the connection was last changed.
DCA chmgrTConnDcapType	1.3.6.1.4.1.2928.6.2.14.1.5.2.1.8	DcapType	read-only	The DCAP (DTM Channel Adaptation Protocol) type for the connection.
DST chmgrTConnDst	1.3.6.1.4.1.2928.6.2.14.1.5.2.1.9	Dst	read-only	The DST (DTM Service Type) of the service that uses the connection.
DST chmgrTConnSourceDsti	1.3.6.1.4.1.2928.6.2.14.1.5.2.1.10	Dsti	read-only	The DSTI (DTM Service Type Instance) of the service at the originating node of the connection.
DTM chmgrTConnSourceAddress	1.3.6.1.4.1.2928.6.2.14.1.5.2.1.11	DtmNode	read-only	The DTM address of the connection's originating node.
DST chmgrTConnDestinationDsti	1.3.6.1.4.1.2928.6.2.14.1.5.2.1.12	Dsti	read-only	The DSTI (DTM Service Type Instance) of the service at the terminating node of the connection.
DTM chmgrTConnDestinationAddress	1.3.6.1.4.1.2928.6.2.14.1.5.2.1.13	DtmNode	read-only	The DTM address of the connection's terminating node.
TIM chmgrTConnStatusLastChanged	1.3.6.1.4.1.2928.6.2.14.1.5.2.1.14	TimeStamp	read-only	The value of sysUpTime when the operational status of the connection was last changed.
INT chmgrTConnAdminStatus	1.3.6.1.4.1.2928.6.2.14.1.5.2.1.15	INTEGER	read-only	The administrative state of the connection. The administrative state is controlled by the application that provides a service on the connection. It may be accessed in the service's MIB, where the instance is described by chmgrTConnServiceReference.
INT chmgrTConnOperStatus	1.3.6.1.4.1.2928.6.2.14.1.5.2.1.16	INTEGER	read-only	The operational state of the connection. It should follow the administrative state described in chmgrTConnAdminStatus. up(1) A channel has been established. down(2) No channels are established, and the connection's administrative state is down. dormant(5) No channels have been established. The connection's administrative state is up and the connection is pending a terminating channel.
DCP chmgrTConnDcpVersion	1.3.6.1.4.1.2928.6.2.14.1.5.2.1.17	DcpVersion	read-only	Version of DCP that is used for this connection. `any(0)' means that a channel is not established.
chmgrTChannelTable	1.3.6.1.4.1.2928.6.2.14.1.5.3		not-accessible	The channels that exists on a terminating connection. The table is managed by the application that provides the service on the connection. A row is inserted when a new channel is established and is removed when a channel is torn down. For a 1+1 protected connection, there are two channels in a connection.
chmgrTChannelEntry	1.3.6.1.4.1.2928.6.2.14.1.5.3.1		not-accessible	An entry in the table represents a channel on a connection.
U32 chmgrTChanIndex	1.3.6.1.4.1.2928.6.2.14.1.5.3.1.1	Unsigned32	not-accessible	The index for the channel within the connection. If a connection is 1+1 protected, is consists of two channels.
CHA chmgrTChanChannelId	1.3.6.1.4.1.2928.6.2.14.1.5.3.1.2	ChannelId	read-only	The identity of the DTM channel. If no channel is established, the value is zero (0).
TIM chmgrTChanCreated	1.3.6.1.4.1.2928.6.2.14.1.5.3.1.3	TimeStamp	read-only	The sysUpTime when the channel was created.
chmgrStatisticsGroup	1.3.6.1.4.1.2928.6.2.14.1.6
chmgrOStatDcap1Table	1.3.6.1.4.1.2928.6.2.14.1.6.1		not-accessible	The table shows statistics for originating DCAP-1 connections. It uses the same index as the chmgrOConnectionTable. Note that all connections are not of the type DCAP-1, and are hence not represented in this table.
chmgrOStatDcap1Entry	1.3.6.1.4.1.2928.6.2.14.1.6.1.1		not-accessible	An entry represents statistics for one originating connection.
C32 chmgrOStatDcap1OctetsEx	1.3.6.1.4.1.2928.6.2.14.1.6.1.1.1	Counter32	read-only	The total number of out-bound octets (bytes) on the connection.
C32 chmgrOStatDcap1Packets	1.3.6.1.4.1.2928.6.2.14.1.6.1.1.2	Counter32	read-only	The total number of out-bound packets on the connection.
G32 chmgrOStatDcap1UtilizedBps	1.3.6.1.4.1.2928.6.2.14.1.6.1.1.3	Gauge32	read-only	The utilization in bits per second on the connection as mean value during the last 30 seconds
C32 chmgrOStatDcap1DiscardOctets	1.3.6.1.4.1.2928.6.2.14.1.6.1.1.4	Counter32	read-only	The number of out-bound octets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
C32 chmgrOStatDcap1DiscardPackets	1.3.6.1.4.1.2928.6.2.14.1.6.1.1.5	Counter32	read-only	The number of out-bound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
C64 chmgrOStatDcap1Bitrate	1.3.6.1.4.1.2928.6.2.14.1.6.1.1.6	Counter64	read-only	The utilization in bits per second on the connection as mean value measured during the last 30 seconds. This value is a 64-bit equivalent to chmgrOStatDcap1UtilizedBps.
U32 chmgrOStatDcap1Load	1.3.6.1.4.1.2928.6.2.14.1.6.1.1.7	Unsigned32	read-only	The utilization (load) in percent on the connection as mean value measured during the last 30 seconds.
chmgrTStatDcap1Table	1.3.6.1.4.1.2928.6.2.14.1.6.2		not-accessible	The table shows statistics for terminating DCAP-1 connections. It uses the same index as the chmgrTConnectionTable. Note that all connections are not of the type DCAP-1, and are hence not represented in this table.
chmgrTStatDcap1Entry	1.3.6.1.4.1.2928.6.2.14.1.6.2.1		not-accessible	An entry representing statistics for one terminating connection.
C32 chmgrTStatDcap1Octets	1.3.6.1.4.1.2928.6.2.14.1.6.2.1.1	Counter32	read-only	The total number of in-bound octets (bytes) on the connection.
C32 chmgrTStatDcap1Packets	1.3.6.1.4.1.2928.6.2.14.1.6.2.1.2	Counter32	read-only	The total number of in-bound packets on the connection.
G32 chmgrTStatDcap1UtilizedBps	1.3.6.1.4.1.2928.6.2.14.1.6.2.1.3	Gauge32	read-only	The utilization in bits per second on the connection as a mean value during the last 30 seconds.
C32 chmgrTStatDcap1DiscardOctets	1.3.6.1.4.1.2928.6.2.14.1.6.2.1.4	Counter32	read-only	The number of in-bound octets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
C32 chmgrTStatDcap1DiscardPackets	1.3.6.1.4.1.2928.6.2.14.1.6.2.1.5	Counter32	read-only	The number of in-bound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
C32 chmgrTStatDcap1ErrorCRC	1.3.6.1.4.1.2928.6.2.14.1.6.2.1.6	Counter32	read-only	The number of CRC32 errors detected on in-bound packets for the connection.
C32 chmgrTStatDcap1ErrorLods	1.3.6.1.4.1.2928.6.2.14.1.6.2.1.7	Counter32	read-only	The number of LODS errors detected on in-bound data.
C64 chmgrTStatDcap1Bitrate	1.3.6.1.4.1.2928.6.2.14.1.6.2.1.8	Counter64	read-only	The utilization in bits per second on the connection as mean value measured during the last 30 seconds. This value is a 64-bit equivalent to chmgrTStatDcap1UtilizedBps.
U32 chmgrTStatDcap1Load	1.3.6.1.4.1.2928.6.2.14.1.6.2.1.9	Unsigned32	read-only	The utilization (load) in percent on the connection as mean value measured during the last 30 seconds.
chmgrTStatPMReferenceTable	1.3.6.1.4.1.2928.6.2.14.1.6.3		not-accessible	Table with reference to Performance Monitoring Data for the connections. It uses the same index as the chmgrOConnectionTable. Note that all connections are not represented in this table.
chmgrTStatPMReferenceEntry	1.3.6.1.4.1.2928.6.2.14.1.6.3.1		not-accessible	An entry in the table.
NUM chmgrTStatPMReference	1.3.6.1.4.1.2928.6.2.14.1.6.3.1.1	RowPointer	read-only	A reference to a row in a table that shows performance data for the connection. The table is not part of this MIB.
chmgrChannelGroup	1.3.6.1.4.1.2928.6.2.14.1.7
chmgrChannelTable	1.3.6.1.4.1.2928.6.2.14.1.7.1		not-accessible	Table with all channels, that is originating, transiting or terminating channels.
chmgrChannelEntry	1.3.6.1.4.1.2928.6.2.14.1.7.1.1		not-accessible	An entry represents one branch of the channel. There table has on entry for each channel branch that is transiting and terminating in the node.
MAC chmgrChanSourceMacAddress	1.3.6.1.4.1.2928.6.2.14.1.7.1.1.1	MacAddress	not-accessible	The MAC address of the node where the channel originates.
CHA chmgrChanChannelId	1.3.6.1.4.1.2928.6.2.14.1.7.1.1.2	ChannelId	not-accessible	The identity of the DTM channel.
U32 chmgrChanOutgoingIfBoard	1.3.6.1.4.1.2928.6.2.14.1.7.1.1.3	Unsigned32	not-accessible	The identity of the board where the DTM interface is located on which this branch of the channel leaves this node. If the channel branch does not leave this node, then the value is 0.
U32 chmgrChanOutgoingIfPort	1.3.6.1.4.1.2928.6.2.14.1.7.1.1.4	Unsigned32	not-accessible	The identity of the port on the board specified in chmgrChanOutgoingIfBoard for the DTM interface, on which this branch of the channel leaves the this node. If the channel branch does not leave this node, then the value is the same as the value of chmgrChanDestDsti.
MAC chmgrChanOutgoingIfMacAddress	1.3.6.1.4.1.2928.6.2.14.1.7.1.1.5	MacAddress	read-only	The MAC address of the DTM interface on which this branch of the channel leaves this node.
MAC chmgrChanNextHopMacAddress	1.3.6.1.4.1.2928.6.2.14.1.7.1.1.6	MacAddress	read-only	The MAC address for the next-hop DTM node.
ADR chmgrChanNextHopDtmAddress	1.3.6.1.4.1.2928.6.2.14.1.7.1.1.7	DtmAddress	read-only	The DTM address for the next-hop DTM node.
U32 chmgrChanIncomingIfBoard	1.3.6.1.4.1.2928.6.2.14.1.7.1.1.8	Unsigned32	read-only	The identity of the board where the DTM interface is located on which this channel is entering this node. If the channel originates in this node, then the value is 0.
U32 chmgrChanIncomingIfPort	1.3.6.1.4.1.2928.6.2.14.1.7.1.1.9	Unsigned32	read-only	The identity of the port on the board specified in chmgrChanIncomingIfBoard for the DTM interface, on which this channels is entering this node. If the channel originates in this node, then the value is 0.
ADR chmgrChanSourceDtmAddress	1.3.6.1.4.1.2928.6.2.14.1.7.1.1.10	DtmAddress	read-only	The DTM address of the node where the channel originates.
DST chmgrChanDst	1.3.6.1.4.1.2928.6.2.14.1.7.1.1.11	Dst	read-only	The DST (DTM Service Type) of the service that uses the channel.
DST chmgrChanSourceDsti	1.3.6.1.4.1.2928.6.2.14.1.7.1.1.12	Dsti	read-only	The DSTI (DTM Service Type Instance) of the service at the originating node of the channel.
T/F chmgrChanIsMulticast	1.3.6.1.4.1.2928.6.2.14.1.7.1.1.13	TruthValue	read-only	Describes if the channel is a multicast or unicast type. true(1) The channel is a multicast channel. false(2) The channel is a unicast channel.
U32 chmgrChanCapacity	1.3.6.1.4.1.2928.6.2.14.1.7.1.1.14	Unsigned32	read-only	The capacity of the channel in 512 kbps slots.
DST chmgrChanDestDsti	1.3.6.1.4.1.2928.6.2.14.1.7.1.1.15	Dsti	read-only	The DSTI (DTM Service Type Instance) of the terminating part of the service. This value is only valid for an entry describing a channel branch that is terminating on the node. Its value is 0 for an entry describing a channel branch that is continuing to another node.
chmgrNotifications	1.3.6.1.4.1.2928.6.2.14.2
chmgrConformance	1.3.6.1.4.1.2928.6.2.14.3

RFC description

Net Insight AB MIB for Channel Manager managing connections and channel configuration across heterogeneous services.

Start monitoring Net Insight media transport chassis with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NETI-CHMGR-MIB