All MIBs › NATEKS-MIB › configRW
configRW
Module: NATEKS-MIB
OID (symbolic): NATEKS-MIB::configRW
OID (numeric): 1.3.6.1.4.1.4249.2.4.1
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Reading configRW results in reading the whole running config (as DUMP R in Megatrans 3C does). Writing configRW results in writing to startup config (as LOAD in Megatrans 3C does). This variable may be also used by devices, that do not maintain configValueTable and configGroupTable, to get/set their configuration.
What is configRW?
Reading this returns the device's entire running configuration (like the DUMP R command); writing it loads a full configuration into the startup config (like LOAD); intended for devices that don't expose the more granular configValueTable/configGroupTable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4249.2.4.1 snmpwalk -v2c -c public <target> NATEKS-MIB::configRW
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4249.2.4.1.1 snmpget -v2c -c public <target> NATEKS-MIB::configRW.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4249.2.4.1.1 s <value>
Start monitoring Nateks Group access equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NATEKS-MIB::configRW OID value, configure state conditions and alerts, and monitor any Nateks Group access equipment from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4249 | nateks | NATEKS-MIB |
| 1.3.6.1.4.1.4249.2 | nateksMgmt | NATEKS-MIB |
| 1.3.6.1.4.1.4249.2.4 | config | NATEKS-MIB |
| 1.3.6.1.4.1.4249.2.4.1 | configRW | NATEKS-MIB |