NATEKS-MIB :: dOutNormalState

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › NATEKS-MIB › dOutNormalState

dOutNormalState

Module: NATEKS-MIB

OID (symbolic): NATEKS-MIB::dOutNormalState

OID (numeric): 1.3.6.1.4.1.4249.2.5.10.2.2.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Normal discrete output state. If it is any(5), then input is considered informative, else it is has normal (normally open or normally closed) and alarm state.

What is dOutNormalState?

Configured 'normal' (non-alarm) state for this output -- open(1), closed(2), high(3), low(4), or any(5) if purely informational.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4249.2.5.10.2.2.1.4
snmpwalk -v2c -c public <target> NATEKS-MIB::dOutNormalState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4249.2.5.10.2.2.1.4.1
snmpget -v2c -c public <target> NATEKS-MIB::dOutNormalState.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4249.2.5.10.2.2.1.4.1 i <value>

Start monitoring Nateks Group access equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NATEKS-MIB::dOutNormalState OID value, configure state conditions and alerts, and monitor any Nateks Group access equipment from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4249nateksNATEKS-MIB
1.3.6.1.4.1.4249.2nateksMgmtNATEKS-MIB
1.3.6.1.4.1.4249.2.5statsNATEKS-MIB
1.3.6.1.4.1.4249.2.5.10ioNATEKS-MIB
1.3.6.1.4.1.4249.2.5.10.2ioDOutNATEKS-MIB
1.3.6.1.4.1.4249.2.5.10.2.2ioDOutTableNATEKS-MIB
1.3.6.1.4.1.4249.2.5.10.2.2.1ioDOutEntryNATEKS-MIB
1.3.6.1.4.1.4249.2.5.10.2.2.1.4dOutNormalStateNATEKS-MIB