NATEKS-MIB :: indicationLedFlash

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › NATEKS-MIB › indicationLedFlash

indicationLedFlash

Module: NATEKS-MIB

OID (symbolic): NATEKS-MIB::indicationLedFlash

OID (numeric): 1.3.6.1.4.1.4249.2.5.5.2.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: If the LED is switching on and off at a constant rate, shows how is it blinking. Values from 1 to 14 represent a bit mask, where each bit shows, if the LED is lit during corresponding quarter of second: bit 0 - first quarter, bit 1 - second etc. If the LED is lit constantly, returns 'constant(15)'.

What is indicationLedFlash?

Read-only blink pattern of this LED as a 4-bit mask (bit 0 = first quarter-second, etc.), or constant(15) if lit steadily; notPopulated(0) if the LED doesn't exist.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4249.2.5.5.2.1.4
snmpwalk -v2c -c public <target> NATEKS-MIB::indicationLedFlash

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4249.2.5.5.2.1.4.1
snmpget -v2c -c public <target> NATEKS-MIB::indicationLedFlash.1

Start monitoring Nateks Group access equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NATEKS-MIB::indicationLedFlash OID value, configure state conditions and alerts, and monitor any Nateks Group access equipment from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4249nateksNATEKS-MIB
1.3.6.1.4.1.4249.2nateksMgmtNATEKS-MIB
1.3.6.1.4.1.4249.2.5statsNATEKS-MIB
1.3.6.1.4.1.4249.2.5.5indicationNATEKS-MIB
1.3.6.1.4.1.4249.2.5.5.2indicationLedTableNATEKS-MIB
1.3.6.1.4.1.4249.2.5.5.2.1indicationLedEntryNATEKS-MIB
1.3.6.1.4.1.4249.2.5.5.2.1.4indicationLedFlashNATEKS-MIB