| OID symbolic | OID numeric | Type | Access | Description |
|---|
| lumInventoryMIBModule | 1.3.6.1.4.1.8708.1.1.5 | | | The inventory MIB.
In large parts modeled after the Entity MIB
version 2 see RFC2737.
- General
- Physical entitites |
| lumInventoryConfs | 1.3.6.1.4.1.8708.2.3.1 | | | |
| lumInventoryGroups | 1.3.6.1.4.1.8708.2.3.1.1 | | | |
| invPhysGroup | 1.3.6.1.4.1.8708.2.3.1.1.1 | | | The physical inventory objects. |
| invGeneralGroup | 1.3.6.1.4.1.8708.2.3.1.1.2 | | | The physical inventory objects. |
| invEventGroup | 1.3.6.1.4.1.8708.2.3.1.1.3 | | | The inventory notifications. |
| invGeneralGroupV2 | 1.3.6.1.4.1.8708.2.3.1.1.4 | | | The physical inventory objects. |
| invPhysGroupV2 | 1.3.6.1.4.1.8708.2.3.1.1.5 | | | The physical inventory objects V2. |
| invPhysGroupV3 | 1.3.6.1.4.1.8708.2.3.1.1.6 | | | The physical inventory objects V3. |
| invEntityGroup | 1.3.6.1.4.1.8708.2.3.1.1.7 | | | The entity objects V1. |
| invRelationGroup | 1.3.6.1.4.1.8708.2.3.1.1.8 | | | The relation objects V1. |
| invGeneralGroupV3 | 1.3.6.1.4.1.8708.2.3.1.1.9 | | | The physical inventory objects. |
| invGeneralGroupV4 | 1.3.6.1.4.1.8708.2.3.1.1.10 | | | The physical inventory objects v4. |
| invPhysGroupV4 | 1.3.6.1.4.1.8708.2.3.1.1.11 | | | The physical inventory objects V4 (release R23.1). |
| invPhysGroupV5 | 1.3.6.1.4.1.8708.2.3.1.1.12 | | | The physical inventory objects V5 (release R28). |
| invInsRemGroup | 1.3.6.1.4.1.8708.2.3.1.1.13 | | | The insert remove events objects V1 (release R28). |
| invGeneralGroupV5 | 1.3.6.1.4.1.8708.2.3.1.1.14 | | | The physical inventory objects V5 (release R28). |
| lumInventoryCompl | 1.3.6.1.4.1.8708.2.3.1.2 | | | |
| lumInventoryBasicComplV1 | 1.3.6.1.4.1.8708.2.3.1.2.1 | | | Basic implementation requirements for the
inventory MIB. |
| lumInventoryBasicComplV2 | 1.3.6.1.4.1.8708.2.3.1.2.2 | | | Basic implementation requirements for the
inventory MIB v2. |
| lumInventoryBasicComplV3 | 1.3.6.1.4.1.8708.2.3.1.2.3 | | | Basic implementation requirements for the
inventory MIB v3. |
| lumInventoryBasicComplV4 | 1.3.6.1.4.1.8708.2.3.1.2.4 | | | Basic implementation requirements for the
inventory MIB v4. |
| lumInventoryBasicComplV5 | 1.3.6.1.4.1.8708.2.3.1.2.5 | | | Basic implementation requirements for the
inventory MIB v5. |
| lumInventoryBasicComplV6 | 1.3.6.1.4.1.8708.2.3.1.2.6 | | | Basic implementation requirements for the
inventory MIB v6. |
| lumInventoryBasicComplV7 | 1.3.6.1.4.1.8708.2.3.1.2.7 | | | Basic implementation requirements for the
inventory MIB v7. |
| lumInventoryBasicComplV8 | 1.3.6.1.4.1.8708.2.3.1.2.8 | | | Basic implementation requirements for the
inventory MIB v8. |
| lumInventoryBasicComplV9 | 1.3.6.1.4.1.8708.2.3.1.2.9 | | | Basic implementation requirements for the
inventory MIB v9. |
| lumInventoryBasicComplV10 | 1.3.6.1.4.1.8708.2.3.1.2.10 | | | Basic implementation requirements for the
inventory MIB v10. (R28.0) |
| lumInventoryMinimalGroups | 1.3.6.1.4.1.8708.2.3.1.3 | | | |
| inventoryGeneralMinimalGroupV1 | 1.3.6.1.4.1.8708.2.3.1.3.1 | | | The minimal general inventory objects. |
| lumInventoryMinimalCompl | 1.3.6.1.4.1.8708.2.3.1.4 | | | |
| lumInventoryMinimalComplV1 | 1.3.6.1.4.1.8708.2.3.1.4.1 | | | Minimal implementation requirements for the inventory MIB v1. |
| lumInventoryMinimalComplV2 | 1.3.6.1.4.1.8708.2.3.1.4.2 | | | Minimal implementation requirements for the inventory MIB v1. |
| lumInventoryMinimalComplV3 | 1.3.6.1.4.1.8708.2.3.1.4.3 | | | Minimal implementation requirements for the inventory MIB v2. |
| lumInventoryMIBObjects | 1.3.6.1.4.1.8708.2.3.2 | | | |
| invPhysical | 1.3.6.1.4.1.8708.2.3.2.1 | | | |
| invPhysTable | 1.3.6.1.4.1.8708.2.3.2.1.1 | | not-accessible | This table contains one row per physical
entity. There is always at least one row
for an 'overall' physical entity. |
| invPhysEntry | 1.3.6.1.4.1.8708.2.3.2.1.1.1 | | not-accessible | Information about a particular physical
entity.
Each entry provides objects (invPhysicalDescr,
invPhysicalVendorType, and invPhysicalClass)
to help an NMS identify and characterize the
entry, and objects (invPhysicalContainedIn
and invPhysicalParentRelPos) to help an NMS
relate the particular entry to other entries
in this table. |
| U32 invPhysIndex | 1.3.6.1.4.1.8708.2.3.2.1.1.1.1 | Unsigned32 | read-only | The index for this entry. |
| STR invPhysDescr | 1.3.6.1.4.1.8708.2.3.2.1.1.1.2 | SnmpAdminString | read-only | A textual description of physical entity. This
object should contain a string which identifies
the manufacturers name for the physical entity,
and should be set to a distinct value for each
version or model of the physical entity. |
| OID invPhysVendorType | 1.3.6.1.4.1.8708.2.3.2.1.1.1.3 | AutonomousType | read-only | An indication of the vendor-specific hardware
type of the physical entity. Note that this is
different from the definition of MIB-IIs
sysObjectID.
An agent should set this object to a
enterprise-specific registration identifier value
indicating the specific equipment type in detail.
The associated instance of invPhysClass is used
to indicate the general type of hardware device.
If no vendor-specific registration identifier
exists for this physical entity, or the value
is unknown by this agent, then the value { 0 0 }
is returned. |
| U32 invPhysContainedIn | 1.3.6.1.4.1.8708.2.3.2.1.1.1.4 | Unsigned32 | read-only | The value of invPhysIndex for the physical
entity which 'contains' this physical entity.
A value of zero indicates this physical entity
is not contained in any other physical entity.
Note that the set of 'containment' relationships
define a strict hierarchy; that is, recursion
is not allowed.
In the event a physical entity is contained by
more than one physical entity (e.g., double-wide
modules), this object should identify the
containing entity with the lowest value
of invPhysIndex. |
| PHY invPhysClass | 1.3.6.1.4.1.8708.2.3.2.1.1.1.5 | PhysicalClass | read-only | An indication of the general hardware type of
the physical entity.
An agent should set this object to the standard
enumeration value which most accurately indicates
the general class of the physical entity, or the
primary class if there is more than one.
If no appropriate standard registration
identifier exists for this physical entity, then
the value 'other(1)' is returned. If the value
is unknown by this agent, then the value
'unknown(2)' is returned. |
| I32 invPhysParentRelPos | 1.3.6.1.4.1.8708.2.3.2.1.1.1.6 | Integer32 | read-only | An indication of the relative position of this
'child' component among all its 'sibling'
components. Sibling components are defined as
invPhysEntries which share the same instance
values of each of the invPhysContainedIn
and invPhysClass objects.
An NMS can use this object to identify the
relative ordering for all sibling components
of a particular parent (identified by the
invPhysContainedIn instance in each sibling
entry).
This value should match any external labeling
of the physical component if possible. For example,
for a container (e.g., card slot) labeled as
'slot #3', invPhysParentRelPos should have the
value '3'. Note that the invPhysEntry for the
module plugged in slot 3 should have an
invPhysParentRelPos value of '1'.
If the physical position of this component
does not match any external numbering or clearly
visible ordering, then user documentation or
other external reference material should be
used to determine the parent-relative position.
If this is not possible, then the the agent should
assign a consistent (but possibly arbitrary)
ordering to a given set of 'sibling' components,
perhaps based on internal representation of the
components.
If the agent cannot determine the parent-relative
position for some reason, or if the associated
value of invPhysContainedIn is '0', then the
value '-1' is returned. Otherwise a non-negative
integer is returned, indicating the parent-relative
position of this physical entity.
Parent-relative ordering normally starts from
'1' and continues to 'N', where 'N' represents
the highest positioned child entity. However,
if the physical entities (e.g., slots) are labeled
from a starting position of zero, then the first
sibling should be associated with a
invPhysParentRelPos value of '0'. Note that this
ordering may be sparse or dense, depending on agent
implementation.
The actual values returned are not globally
meaningful, as each 'parent' component may use
different numbering algorithms. The ordering is
only meaningful among siblings of the same parent
component.
The agent should retain parent-relative position
values across reboots, either through algorithmic
assignment or use of non-volatile storage. |
| STR invPhysName | 1.3.6.1.4.1.8708.2.3.2.1.1.1.7 | MgmtNameString | read-only | The textual name of the physical entity. The
value of this object should be the name of the
component as assigned by the local device and
should be suitable for use in commands entered
at the 'console' of the device. This might be a
text name, such as 'console' or a simple component
number (e.g., port or module number), such as '1',
depending on the physical component naming syntax
of the device.
If there is no local name, or this object is
otherwise not applicable, then this object
contains a zero-length string.
Note that the value of invPhysName for two
physical entities will be the same in the event
that the console interface does not distinguish
between them, e.g., slot-1 and the card in slot-1. |
| STR invPhysHardwareRev | 1.3.6.1.4.1.8708.2.3.2.1.1.1.8 | SnmpAdminString | read-only | The vendor-specific hardware revision string for
the physical entity. The preferred value is the
hardware revision identifier actually printed on
the component itself (if present).
Note that if revision information is stored
internally in a non-printable (e.g., binary)
format, then the agent must convert such
information to a printable format, in an
implementation-specific manner.
If no specific hardware revision string is
associated with the physical component, or this
information is unknown to the agent, then this
object will contain a zero-length string. |
| STR invPhysFirmwareRev | 1.3.6.1.4.1.8708.2.3.2.1.1.1.9 | SnmpAdminString | read-only | The vendor-specific firmware revision string for
the physical entity.
Note that if revision information is stored
internally in a non-printable (e.g., binary)
format, then the agent must convert such
information to a printable format, in an
implementation-specific manner.
If no specific firmware programs are associated
with the physical component, or this information
is unknown to the agent, then this object will
contain a zero-length string. |
| STR invPhysProductDataRev | 1.3.6.1.4.1.8708.2.3.2.1.1.1.10 | SnmpAdminString | read-only | The vendor-specific product data revision string
for the physical entity.
Note that if revision information is stored
internally in a non-printable (e.g., binary)
format, then the agent must convert such
information to a printable format, in an
implementation-specific manner.
If no specific software programs are associated
with the physical component, or this information
is unknown to the agent, then this object will
contain a zero-length string. |
| STR invPhysSerialNum | 1.3.6.1.4.1.8708.2.3.2.1.1.1.11 | SnmpAdminString | read-only | The vendor-specific serial number string for the
physical entity. The preferred value is the
serial number string actually printed on the
component itself (if present).
On the first instantiation of an physical entity,
the value of invPhysSerialNum associated with
that entity is set to the correct vendor-assigned
serial number, if this information is available
to the agent. If a serial number is unknown or
non-existent, the invPhysSerialNum will be
set to a zero-length string instead. |
| STR invPhysMfgName | 1.3.6.1.4.1.8708.2.3.2.1.1.1.12 | SnmpAdminString | read-only | The name of the manufacturer of this physical
component. The preferred value is the manufacturer
name string actually printed on the component
itself (if present).
If the manufacturer name string associated with
the physical component is unknown to the agent,
then this object will contain a zero-length
string. |
| STR invPhysModelName | 1.3.6.1.4.1.8708.2.3.2.1.1.1.13 | SnmpAdminString | read-only | The vendor-specific model name identifier string
associated with this physical component. The
preferred value is the customer-visible
product/part number, which may be printed on the
component itself.
If the model name string associated with the
physical component is unknown to the agent,
then this object will contain a zero-length string. |
| T/F invPhysIsFRU | 1.3.6.1.4.1.8708.2.3.2.1.1.1.14 | TruthValue | read-only | This object indicates whether or not this
physical entity is considered a 'field replaceable
unit' by the vendor. If this object contains
the value 'true(1)' then this invPhysEntry
identifies a field replaceable unit. For all
invPhysEntries which represent components that
are permanently contained within a field
replaceable unit, the value 'false(2)' should
be returned for this object. |
| STR invPhysSoftwareRev | 1.3.6.1.4.1.8708.2.3.2.1.1.1.15 | SnmpAdminString | read-only | The vendor-specific software revision string
for the physical entity.
If no specific software revision string is
associated with the physical component, or
this information is unknown to the agent, then
this object will contain a zero-length string. |
| STR invPhysSoftwareProduct | 1.3.6.1.4.1.8708.2.3.2.1.1.1.16 | SnmpAdminString | read-only | The vendor-specific software part/product number
string for the physical entity.
If no specific software part/product number
string is associated with the physical component,
or this information is unknown to the agent,
then this object will contain a zero-length string. |
| STR invPhysClei | 1.3.6.1.4.1.8708.2.3.2.1.1.1.17 | DisplayString | read-only | The Common Language Equipment Identifier (CLEI)
code for the product.
The format is according to RFC 4152. |
| STR invPhysAid | 1.3.6.1.4.1.8708.2.3.2.1.1.1.18 | DisplayString | read-only | The access identifier (AID) of the equipment.
The format is according to GR-833. |
| invGeneral | 1.3.6.1.4.1.8708.2.3.2.2 | | | |
| DAT invGeneralLastChangeTime | 1.3.6.1.4.1.8708.2.3.2.2.1 | DateAndTime | read-only | The time the inventory list was last changed. |
| TES invGeneralTestAndIncr | 1.3.6.1.4.1.8708.2.3.2.2.2 | TestAndIncr | read-write | Protection against simultaneous access from
multiple managers. See SNMPv2-TC. |
| STR invGeneralMibSpecVersion | 1.3.6.1.4.1.8708.2.3.2.2.3 | DisplayString | read-write | The version of the MIB specification. |
| STR invGeneralMibImplVersion | 1.3.6.1.4.1.8708.2.3.2.2.4 | DisplayString | read-write | The version of the MIB implementation. |
| DAT invGeneralConfigLastChangeTime | 1.3.6.1.4.1.8708.2.3.2.2.5 | DateAndTime | read-only | The time when the configuration of the MIB was
last changed. |
| U32 invGeneralPhysTableSize | 1.3.6.1.4.1.8708.2.3.2.2.6 | Unsigned32 | read-only | Number of rows available in the
physical entities list. |
| U32 invGeneralEntityTableSize | 1.3.6.1.4.1.8708.2.3.2.2.7 | Unsigned32 | read-only | Number of rows available in the
logical entity list. |
| U32 invGeneralRelationTableSize | 1.3.6.1.4.1.8708.2.3.2.2.8 | Unsigned32 | read-only | Number of rows available in the
relation list. |
| U32 invGeneralInsRemTableSize | 1.3.6.1.4.1.8708.2.3.2.2.9 | Unsigned32 | read-only | Number of rows available in the
insert and remove list. |
| C32 invGeneralInsRemLastSeqNumber | 1.3.6.1.4.1.8708.2.3.2.2.10 | Counter32 | read-only | The sequence number last used when creating
a new entry in the insert remove log. |
| lumentisInvNotifications | 1.3.6.1.4.1.8708.2.3.2.3 | | | |
| invNotifyPrefix | 1.3.6.1.4.1.8708.2.3.2.3.0 | | | |
| NTF invNotificationPhysAdded | 1.3.6.1.4.1.8708.2.3.2.3.0.1 | | | Sent when a physical entity is added to the
inventory. |
| NTF invNotificationPhysRemoved | 1.3.6.1.4.1.8708.2.3.2.3.0.2 | | | Sent when a physical entity is removed from the
inventory. |
| invEntities | 1.3.6.1.4.1.8708.2.3.2.4 | | | |
| invEntityTable | 1.3.6.1.4.1.8708.2.3.2.4.1 | | not-accessible | The entity table. |
| invEntityEntry | 1.3.6.1.4.1.8708.2.3.2.4.1.1 | | not-accessible | An entry in the entity table. |
| U32 invEntityIndex | 1.3.6.1.4.1.8708.2.3.2.4.1.1.1 | Unsigned32 | read-only | An arbitrary index assigned to each entry. |
| STR invEntityName | 1.3.6.1.4.1.8708.2.3.2.4.1.1.2 | MgmtNameString | read-only | The management name of the object this entry is
related to. |
| NUM invEntityObject | 1.3.6.1.4.1.8708.2.3.2.4.1.1.3 | RowPointer | read-only | Pointer to the object related to this entry. |
| ENT invEntityClass | 1.3.6.1.4.1.8708.2.3.2.4.1.1.4 | EntityClass | read-only | Indicates the type of entity. |
| invRelations | 1.3.6.1.4.1.8708.2.3.2.5 | | | |
| invRelationTable | 1.3.6.1.4.1.8708.2.3.2.5.1 | | not-accessible | Relation table. |
| invRelationEntry | 1.3.6.1.4.1.8708.2.3.2.5.1.1 | | not-accessible | An entry in the relation table. |
| U32 invRelationIndex | 1.3.6.1.4.1.8708.2.3.2.5.1.1.1 | Unsigned32 | read-only | An arbitrary index assigned to each entry. |
| U32 invRelationEntityIndex1 | 1.3.6.1.4.1.8708.2.3.2.5.1.1.2 | Unsigned32 | read-only | Index in to the entity table. |
| STR invRelationEntityName1 | 1.3.6.1.4.1.8708.2.3.2.5.1.1.3 | MgmtNameString | read-only | Index in to the entity table. |
| INT invRelationType | 1.3.6.1.4.1.8708.2.3.2.5.1.1.4 | INTEGER | read-only | Indicates how entity 2 is related to entity 1.
containedIn - Physical containment. Entity 2 is
physically contained within entity 1.
dependsOn - The correct function of entity 2
depends on the function of entity 1. |
| U32 invRelationEntityIndex2 | 1.3.6.1.4.1.8708.2.3.2.5.1.1.5 | Unsigned32 | read-only | Index in to the entity table. |
| STR invRelationEntityName2 | 1.3.6.1.4.1.8708.2.3.2.5.1.1.6 | MgmtNameString | read-only | Name of the object. |
| invInsRemLog | 1.3.6.1.4.1.8708.2.3.2.6 | | | |
| invInsRemTable | 1.3.6.1.4.1.8708.2.3.2.6.1 | | not-accessible | This table contains one row per insert or
remove event of any physical entity. |
| invInsRemEntry | 1.3.6.1.4.1.8708.2.3.2.6.1.1 | | not-accessible | Information about a particular insert
or remove entry. |
| U32 invInsRemIndex | 1.3.6.1.4.1.8708.2.3.2.6.1.1.1 | Unsigned32 | read-only | The index for this entry. |
| STR invInsRemName | 1.3.6.1.4.1.8708.2.3.2.6.1.1.2 | MgmtNameString | read-only | The management name of the object this entry
is related to. |
| INS invInsRemEvent | 1.3.6.1.4.1.8708.2.3.2.6.1.1.3 | InsRemEventType | read-only | The type of event. |
| DAT invInsRemTimestamp | 1.3.6.1.4.1.8708.2.3.2.6.1.1.4 | DateAndTime | read-only | The time when the event occurred. |
| PHY invInsRemEquipmentType | 1.3.6.1.4.1.8708.2.3.2.6.1.1.5 | PhysicalClass | read-only | The Part Number of the product. |
| STR invInsRemPhysicalLocation | 1.3.6.1.4.1.8708.2.3.2.6.1.1.6 | DisplayString | read-only | The physical location of the product. |
| STR invInsRemClei | 1.3.6.1.4.1.8708.2.3.2.6.1.1.7 | DisplayString | read-only | The Common Language Equipment Identifier
(CLEI) code for the product. |
| STR invInsRemSerialNumber | 1.3.6.1.4.1.8708.2.3.2.6.1.1.8 | DisplayString | read-only | The serial number string for the
physical entity. |
| STR invInsRemPartNumber | 1.3.6.1.4.1.8708.2.3.2.6.1.1.9 | DisplayString | read-only | The Part Number of the product. |
| C32 invInsRemSeqNumber | 1.3.6.1.4.1.8708.2.3.2.6.1.1.10 | Counter32 | read-only | The last sequence number used when
this event occurred. |
