All MIBs › JUNIPER-WX-MIB › jnxWxAppStatsBytesInPercent
jnxWxAppStatsBytesInPercent
Module: JUNIPER-WX-MIB
OID (symbolic): JUNIPER-WX-MIB::jnxWxAppStatsBytesInPercent
OID (numeric): 1.3.6.1.4.1.8239.2.2.1.2.6.2.1.3
Node type: OBJECT-TYPE
Type: Gauge32
Access: read-only
Description: The percentage of the bytes in for this application over the total bytes into the WX, since the system was started, that were identified for reduction, and addressed to the WX whose IP address is in the row in jnxWxAsmTable that matches the index jnxWxAsmIndex, and that was received from the application whose name is in the row in jnxWxAppTable that matches the index jnxWxAppIndex.
The value returned is (percentage * 1000). Applications should divide the returned value by 1000.
What is jnxWxAppStatsBytesInPercent?
This reports what percentage of total inbound reduced traffic (for the matched remote peer) this specific application accounts for, expressed as a percentage multiplied by 1000 (divide by 1000 for the real percentage). An admin uses this to quickly spot which application is dominating WAN usage to a given site, e.g. a value of 40000 means 40%.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8239.2.2.1.2.6.2.1.3 snmpwalk -v2c -c public <target> JUNIPER-WX-MIB::jnxWxAppStatsBytesInPercent
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8239.2.2.1.2.6.2.1.3.1 snmpget -v2c -c public <target> JUNIPER-WX-MIB::jnxWxAppStatsBytesInPercent.1
Start monitoring Juniper WX Series WAN acceleration appliance (primary managed objects) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-WX-MIB::jnxWxAppStatsBytesInPercent OID value, configure state conditions and alerts, and monitor any Juniper WX Series WAN acceleration appliance (primary managed objects) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8239 | juniperWxRoot | JUNIPER-WX-GLOBAL-REG |
| 1.3.6.1.4.1.8239.2 | jnxWxMibs | JUNIPER-WX-GLOBAL-REG |
| 1.3.6.1.4.1.8239.2.2 | jnxWxSpecificMib | JUNIPER-WX-GLOBAL-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8239.2.2.1 | jnxWxMib | JUNIPER-WX-MIB |
| 1.3.6.1.4.1.8239.2.2.1.2 | jnxWxObjs | JUNIPER-WX-MIB |
| 1.3.6.1.4.1.8239.2.2.1.2.6 | jnxWxApp | JUNIPER-WX-MIB |
| 1.3.6.1.4.1.8239.2.2.1.2.6.2 | jnxWxAppStatsTable | JUNIPER-WX-MIB |
| 1.3.6.1.4.1.8239.2.2.1.2.6.2.1 | jnxWxAppStatsEntry | JUNIPER-WX-MIB |
| 1.3.6.1.4.1.8239.2.2.1.2.6.2.1.3 | jnxWxAppStatsBytesInPercent | JUNIPER-WX-MIB |