JUNIPER-WX-STATS-MIB

All MIBs › JUNIPER-WX-STATS-MIB

Category: Technology: WAN Optimization, Vendor: Juniper

Description: Juniper Networks WX series MIB for monitoring WAN optimization traffic statistics, compression ratios, and throughput metrics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is JUNIPER-WX-STATS-MIB?

JUNIPER-WX-STATS-MIB is a Juniper Networks (WX/WXC WAN-optimization appliance family) proprietary MIB reporting system-level pass-through and compression-failure statistics. Its objects count bytes/packets matched by an application-definition pass-through rule, traffic with no remote WX peer, non-TCP/non-IP traffic, fragmented-IP traffic, VLAN-tagged traffic, and multicast traffic (each pass-through, i.e., not optimized), alongside compression-failure counters — application-definition disabled, TCP acceleration routed to a remote peer, resource exhaustion, algorithm-limit reached, and CIFS-specific failure causes. As a performance MIB it lets an administrator diagnose why traffic isn't being WAN-optimized by breaking down pass-through and failure reasons. It is deployed on Juniper Networks WX/WXC WAN-optimization appliances. Engineers can download the JUNIPER-WX-STATS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in JUNIPER-WX-STATS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper Networks WX/WXC WAN-optimization appliances

Monitoring Examples

An administrator checks jnxWxGrpStatsSysPtNoRemoteWxBytes to determine whether a large share of traffic is passing through unoptimized because no remote WX peer was found for that destination.

What Can Be Monitored

pass-through traffic and compression-failure statistics by cause

Imported Objects

From JUNIPER-WX-GLOBAL-MIB

jnxWxGrpStats

OBJECT-IDENTITY

From JUNIPER-WX-STATUS-MIB

jnxWxGrpStatusAppId	OBJECT-TYPE
jnxWxGrpStatusRemoteWxId	OBJECT-TYPE

From RFC1155-SMI

Counter

From SNMPv2-SMI

Counter64
OBJECT-IDENTITY
OBJECT-TYPE

How to Use in IPNetwork Monitor

Example using jnxWxGrpStatsSysPtAppDefMatchBytes OID:

Select a Juniper Networks WX/WXC WAN-optimization appliance (pass-through/compression stats) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type jnxWxGrpStatsSysPtAppDefMatchBytes into the Find box to locate it in the OID tree, then select it and click OK. It reports the passthru byte count because of application definition. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
jnxWxGrpStatsSys	1.3.6.1.4.1.2636.3.41.1.1.2.1			This group contains statistics at the system level.
jnxWxGrpStatsSysPt	1.3.6.1.4.1.2636.3.41.1.1.2.1.1			This group contains passthrough statistics.
C64 jnxWxGrpStatsSysPtAppDefMatchBytesEx	1.3.6.1.4.1.2636.3.41.1.1.2.1.1.1	Counter64	read-only	Passthru byte count because of application definition.
C64 jnxWxGrpStatsSysPtAppDefMatchPkts	1.3.6.1.4.1.2636.3.41.1.1.2.1.1.2	Counter64	read-only	Passthru packet count because of application definition.
C64 jnxWxGrpStatsSysPtNoRemoteWxBytes	1.3.6.1.4.1.2636.3.41.1.1.2.1.1.3	Counter64	read-only	Passthru byte count due to no Remote WX.
C64 jnxWxGrpStatsSysPtNoRemoteWxPkts	1.3.6.1.4.1.2636.3.41.1.1.2.1.1.4	Counter64	read-only	Passthru packet count due to no Remote WX.
C64 jnxWxGrpStatsSysPtNonTcpProtoBytes	1.3.6.1.4.1.2636.3.41.1.1.2.1.1.5	Counter64	read-only	Passthru byte count because protocol is non-TCP.
C64 jnxWxGrpStatsSysPtNonTcpProtoPkts	1.3.6.1.4.1.2636.3.41.1.1.2.1.1.6	Counter64	read-only	Passthru packet count because protocol is non-TCP.
C64 jnxWxGrpStatsSysPtNonIpBytes	1.3.6.1.4.1.2636.3.41.1.1.2.1.1.7	Counter64	read-only	Passthru byte count because of non-IP traffic like Appletalk, IPX, etc.
C64 jnxWxGrpStatsSysPtNonIpPkts	1.3.6.1.4.1.2636.3.41.1.1.2.1.1.8	Counter64	read-only	Passthru packet count because of non-IP traffic like Appletalk, IPX, etc.
C64 jnxWxGrpStatsSysPtFragIpBytes	1.3.6.1.4.1.2636.3.41.1.1.2.1.1.9	Counter64	read-only	Passthru because of fragmented IP packets.
C64 jnxWxGrpStatsSysPtFragIpPkts	1.3.6.1.4.1.2636.3.41.1.1.2.1.1.10	Counter64	read-only	Passthru because of fragmented IP bytes.
C64 jnxWxGrpStatsSysPtVlanBytes	1.3.6.1.4.1.2636.3.41.1.1.2.1.1.11	Counter64	read-only	Passthru due to VLAN bytes.
C64 jnxWxGrpStatsSysPtVlanPkts	1.3.6.1.4.1.2636.3.41.1.1.2.1.1.12	Counter64	read-only	Passthru due to VLAN packets.
C64 jnxWxGrpStatsSysPtMcastBytes	1.3.6.1.4.1.2636.3.41.1.1.2.1.1.13	Counter64	read-only	Passthru due to Multicast bytes.
C64 jnxWxGrpStatsSysPtMcastPkts	1.3.6.1.4.1.2636.3.41.1.1.2.1.1.14	Counter64	read-only	Passthru due to Multicast packets.
jnxWxGrpStatsSysComp	1.3.6.1.4.1.2636.3.41.1.1.2.1.2			This group contains Compression statistics at the system level.
C64 jnxWxGrpStatsSysCompFailAppDefDisableBytes	1.3.6.1.4.1.2636.3.41.1.1.2.1.2.1	Counter64	read-only	Byte count when compression failed because application definition did not enable compression.
C64 jnxWxGrpStatsSysCompFailAppDefDisablePkts	1.3.6.1.4.1.2636.3.41.1.1.2.1.2.2	Counter64	read-only	Packet count when compression failed because application definition did not enable compression.
C64 jnxWxGrpStatsSysCompFailTcpAcclToRemoteBytes	1.3.6.1.4.1.2636.3.41.1.1.2.1.2.3	Counter64	read-only	Byte count when compression failed because TCP acceleration was not configured to remote WX.
C64 jnxWxGrpStatsSysCompFailTcpAcclToRemotePkts	1.3.6.1.4.1.2636.3.41.1.1.2.1.2.4	Counter64	read-only	Packet count when compression failed because TCP acceleration was not configured to remote WX.
C64 jnxWxGrpStatsSysCompFailResCrunchBytes	1.3.6.1.4.1.2636.3.41.1.1.2.1.2.5	Counter64	read-only	Byte count when compression failed due to resource crunch.
C64 jnxWxGrpStatsSysCompFailAlgoLimitBytes	1.3.6.1.4.1.2636.3.41.1.1.2.1.2.6	Counter64	read-only	Byte count when compression failed because of algorithmic limitations.
C64 jnxWxGrpStatsSysCompTcpAcclFailedBytes	1.3.6.1.4.1.2636.3.41.1.1.2.1.2.7	Counter64	read-only	Byte count when compression failed because of TCP acceleration error.
C64 jnxWxGrpStatsSysCompTcpAcclFailedPkts	1.3.6.1.4.1.2636.3.41.1.1.2.1.2.8	Counter64	read-only	Packet count when compression failed because of TCP acceleration error.
jnxWxGrpStatsSysCifs	1.3.6.1.4.1.2636.3.41.1.1.2.1.3			This group contains CIFS statistics at the system level.
C64 jnxWxGrpStatsSysCifsFailAppDefBytes	1.3.6.1.4.1.2636.3.41.1.1.2.1.3.1	Counter64	read-only	Byte count when CIFS acceleration failed because application definition did not enable CIFS.
C64 jnxWxGrpStatsSysCifsFailAppDefPkts	1.3.6.1.4.1.2636.3.41.1.1.2.1.3.2	Counter64	read-only	Packet count when CIFS acceleration failed because application definition did not enable CIFS.
C64 jnxWxGrpStatsSysCifsFailTcpAcclToRemoteBytes	1.3.6.1.4.1.2636.3.41.1.1.2.1.3.3	Counter64	read-only	Byte count when CIFS failed because TCP acceleration was not configured to remote WX.
C64 jnxWxGrpStatsSysCifsFailTcpAcclToRemotePkts	1.3.6.1.4.1.2636.3.41.1.1.2.1.3.4	Counter64	read-only	Packet count when CIFS failed because TCP acceleration was not configured to remote WX.
C64 jnxWxGrpStatsSysCifsFailTcpAcclFailedBytes	1.3.6.1.4.1.2636.3.41.1.1.2.1.3.5	Counter64	read-only	Byte count when CIFS failed because TCP acceleration to remote WX failed.
C64 jnxWxGrpStatsSysCifsFailTcpAcclFailedPkts	1.3.6.1.4.1.2636.3.41.1.1.2.1.3.6	Counter64	read-only	Packet count when CIFS failed because TCP acceleration to remote WX failed.
jnxWxGrpStatsSysExchange	1.3.6.1.4.1.2636.3.41.1.1.2.1.4			This group contains Exchange statistics at the system level.
C64 jnxWxGrpStatsSysExchangeFailAppDefBytes	1.3.6.1.4.1.2636.3.41.1.1.2.1.4.1	Counter64	read-only	Byte count when Exchange acceleration failed because application definition did not enable CIFS.
C64 jnxWxGrpStatsSysExchangeFailAppDefPkts	1.3.6.1.4.1.2636.3.41.1.1.2.1.4.2	Counter64	read-only	Packet count when Exchange acceleration failed because application definition did not enable CIFS.
C64 jnxWxGrpStatsSysExchangeFailTcpAcclToRemoteBytes	1.3.6.1.4.1.2636.3.41.1.1.2.1.4.3	Counter64	read-only	Byte count when Exchange failed because TCP acceleration was not configured to remote WX.
C64 jnxWxGrpStatsSysExchangeFailTcpAcclToRemotePkts	1.3.6.1.4.1.2636.3.41.1.1.2.1.4.4	Counter64	read-only	Packet count when Exchange failed because TCP acceleration was not configured to remote WX.
C64 jnxWxGrpStatsSysExchangeFailTcpAcclFailedBytes	1.3.6.1.4.1.2636.3.41.1.1.2.1.4.5	Counter64	read-only	Byte count when Exchange failed because TCP acceleration to remote WX failed.
C64 jnxWxGrpStatsSysExchangeFailTcpAcclFailedPkts	1.3.6.1.4.1.2636.3.41.1.1.2.1.4.6	Counter64	read-only	Packet count when Exchange failed because TCP acceleration to remote WX failed.
jnxWxGrpStatsAccl	1.3.6.1.4.1.2636.3.41.1.1.2.2			This group contains general acceleration statistics.
jnxWxGrpStatsTcpAcclTable	1.3.6.1.4.1.2636.3.41.1.1.2.2.1		not-accessible	This table displays the TCP acceleration statistics for each application per remote WX currently being monitored.
jnxWxGrpStatsTcpAcclEntry	1.3.6.1.4.1.2636.3.41.1.1.2.2.1.1		not-accessible	A row in jnxWxGrpStatsTcpAcclTable.
C32 jnxWxGrpStatsTcpAcclPtFlows	1.3.6.1.4.1.2636.3.41.1.1.2.2.1.1.1	Counter32	read-only	The number of flows that are currently passthru.
C32 jnxWxGrpStatsTcpAcclProxyFlows	1.3.6.1.4.1.2636.3.41.1.1.2.2.1.1.2	Counter32	read-only	The number of flows that are currently being proxied.
C32 jnxWxGrpStatsTcpAcclPtFlowsDiff	1.3.6.1.4.1.2636.3.41.1.1.2.2.1.1.3	Counter32	read-only	The number of flows that went passthru for this app in last interval (10 sec). These will be delta stats.
C32 jnxWxGrpStatsTcpAcclProxyRequestsDiff	1.3.6.1.4.1.2636.3.41.1.1.2.2.1.1.4	Counter32	read-only	The number of proxy flow request received in last sampling interval (10 sec). These will be delta stats.
C32 jnxWxGrpStatsTcpAcclProxyFlowsDiff	1.3.6.1.4.1.2636.3.41.1.1.2.2.1.1.5	Counter32	read-only	The number of flows we decided to proxy in last sampling interval (10 sec). These will be delta stats.
C32 jnxWxGrpStatsTcpAcclFailedToProxyDiff	1.3.6.1.4.1.2636.3.41.1.1.2.2.1.1.6	Counter32	read-only	The number of flows that could not be proxied for whatever reasons in last sampling interval (10 sec).
jnxWxGrpStatsComp	1.3.6.1.4.1.2636.3.41.1.1.2.3			This group contains compression statistics.
jnxWxGrpStatsCompTable	1.3.6.1.4.1.2636.3.41.1.1.2.3.1		not-accessible	This table displays the compression statistics for each application per remote WX currently being monitored.
jnxWxGrpStatsCompEntry	1.3.6.1.4.1.2636.3.41.1.1.2.3.1.1		not-accessible	A row in jnxWxGrpStatsCompTable.
C64 jnxWxGrpStatsCompBytesIn	1.3.6.1.4.1.2636.3.41.1.1.2.3.1.1.1	Counter64	read-only	The number of bytes in.
C64 jnxWxGrpStatsCompBytesOut	1.3.6.1.4.1.2636.3.41.1.1.2.3.1.1.2	Counter64	read-only	The number of bytes out.
C64 jnxWxGrpStatsCompCacheHits	1.3.6.1.4.1.2636.3.41.1.1.2.3.1.1.3	Counter64	read-only	The number of cache hits.
C64 jnxWxGrpStatsCompCacheMisses	1.3.6.1.4.1.2636.3.41.1.1.2.3.1.1.4	Counter64	read-only	The number of cache misses.
jnxWxGrpStatsWanPerf	1.3.6.1.4.1.2636.3.41.1.1.2.4			This group contains WAN performance statistics.
jnxWxGrpStatsWanPerfTable	1.3.6.1.4.1.2636.3.41.1.1.2.4.1		not-accessible	This table displays the WAN performance statistics for each application per remote WX currently being monitored.
jnxWxGrpStatsWanPerfEntry	1.3.6.1.4.1.2636.3.41.1.1.2.4.1.1		not-accessible	A row in jnxWxGrpStatsWanPerfTable.
C64 jnxWxGrpStatsWanPerfBytesToWan	1.3.6.1.4.1.2636.3.41.1.1.2.4.1.1.1	Counter64	read-only	The number of bytes to WAN.
C64 jnxWxGrpStatsWanPerfBytesFromWan	1.3.6.1.4.1.2636.3.41.1.1.2.4.1.1.2	Counter64	read-only	The number of bytes from WAN.

RFC description

System and passthrough statistics monitoring for Juniper WX compression appliances and WAN optimization.

Start monitoring Juniper Networks WX/WXC WAN-optimization appliance (pass-through/compression stats) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download JUNIPER-WX-STATS-MIB