All MIBs › JUNIPER-WX-MIB › jnxWxSysStatsPktSizeOut4

jnxWxSysStatsPktSizeOut4

OID (symbolic): JUNIPER-WX-MIB::jnxWxSysStatsPktSizeOut4

OID (numeric): 1.3.6.1.4.1.8239.2.2.1.2.4.34

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

What is jnxWxSysStatsPktSizeOut4?

This is the fourth of six outgoing-packet-size bucket counters (Out1 through Out6); the source MIB does not document this bucket's exact size range. An admin uses it with the other Out-buckets to see where outbound packet sizes cluster.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8239.2.2.1.2.4.34
snmpwalk -v2c -c public <target> JUNIPER-WX-MIB::jnxWxSysStatsPktSizeOut4

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.8239.2.2.1.2.4.34.1
snmpget -v2c -c public <target> JUNIPER-WX-MIB::jnxWxSysStatsPktSizeOut4.1

Start monitoring Juniper WX Series WAN acceleration appliance (primary managed objects) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-WX-MIB::jnxWxSysStatsPktSizeOut4 OID value, configure state conditions and alerts, and monitor any Juniper WX Series WAN acceleration appliance (primary managed objects) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.8239	juniperWxRoot	JUNIPER-WX-GLOBAL-REG
1.3.6.1.4.1.8239.2	jnxWxMibs	JUNIPER-WX-GLOBAL-REG
1.3.6.1.4.1.8239.2.2	jnxWxSpecificMib	JUNIPER-WX-GLOBAL-REG

Numeric OID	Name	Module
1.3.6.1.4.1.8239.2.2.1	jnxWxMib	JUNIPER-WX-MIB
1.3.6.1.4.1.8239.2.2.1.2	jnxWxObjs	JUNIPER-WX-MIB
1.3.6.1.4.1.8239.2.2.1.2.4	jnxWxSysStats	JUNIPER-WX-MIB
1.3.6.1.4.1.8239.2.2.1.2.4.34	jnxWxSysStatsPktSizeOut4	JUNIPER-WX-MIB

JUNIPER-WX-MIB :: jnxWxSysStatsPktSizeOut4

jnxWxSysStatsPktSizeOut4

Module

This MIB depends on