JUNIPER-WX-MIB :: jnxWxSysStatsPktSizeIn3

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › JUNIPER-WX-MIB › jnxWxSysStatsPktSizeIn3

jnxWxSysStatsPktSizeIn3

Module: JUNIPER-WX-MIB

OID (symbolic): JUNIPER-WX-MIB::jnxWxSysStatsPktSizeIn3

OID (numeric): 1.3.6.1.4.1.8239.2.2.1.2.4.27

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

What is jnxWxSysStatsPktSizeIn3?

This is the third of six incoming-packet-size bucket counters (In1 through In6); the source MIB leaves the exact byte range for this bucket undocumented. An admin uses it together with the other In-buckets to profile inbound packet-size distribution.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8239.2.2.1.2.4.27
snmpwalk -v2c -c public <target> JUNIPER-WX-MIB::jnxWxSysStatsPktSizeIn3

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.8239.2.2.1.2.4.27.1
snmpget -v2c -c public <target> JUNIPER-WX-MIB::jnxWxSysStatsPktSizeIn3.1

Start monitoring Juniper WX Series WAN acceleration appliance (primary managed objects) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-WX-MIB::jnxWxSysStatsPktSizeIn3 OID value, configure state conditions and alerts, and monitor any Juniper WX Series WAN acceleration appliance (primary managed objects) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.8239juniperWxRootJUNIPER-WX-GLOBAL-REG
1.3.6.1.4.1.8239.2jnxWxMibsJUNIPER-WX-GLOBAL-REG
1.3.6.1.4.1.8239.2.2jnxWxSpecificMibJUNIPER-WX-GLOBAL-REG
Numeric OIDNameModule
1.3.6.1.4.1.8239.2.2.1jnxWxMibJUNIPER-WX-MIB
1.3.6.1.4.1.8239.2.2.1.2jnxWxObjsJUNIPER-WX-MIB
1.3.6.1.4.1.8239.2.2.1.2.4jnxWxSysStatsJUNIPER-WX-MIB
1.3.6.1.4.1.8239.2.2.1.2.4.27jnxWxSysStatsPktSizeIn3JUNIPER-WX-MIB