INTELCORPORATIONICMBGENERICCHASSIS-MIB

All MIBs › INTELCORPORATIONICMBGENERICCHASSIS-MIB

Category: Domain: Server Hardware, Vendor: Intel

Description: Intel Corporation ICMB generic chassis MIB providing SNMP objects for multi-vendor chassis management bus monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is INTELCORPORATIONICMBGENERICCHASSIS-MIB?

This MIB implements Intel Corporation's Intelligent Chassis Management Bus (ICMB) generic chassis specification, an early multi-vendor standard from the mid-1990s server hardware ecosystem for reporting on server chassis components over an out-of-band management bus. It exposes hardware inventory and identity data for chassis components - manufacturer, product name, hardware/firmware version, and serial number - along with ICMB bus/component operational-state indicators. Its central purpose is hardware status monitoring: tracking whether components on the chassis management bus are present, verified, and in a known operational (ICMB) state, functioning as an early precursor to modern hardware health monitoring found in IPMI-based systems. It is closely tied to the ICMB specification itself and to Intel's server-products enterprise MIB branch rather than any single networking standard. It was typically deployed on Intel-based multi-vendor server platforms of the era that implemented the ICMB out-of-band chassis-management bus. Engineers can download the INTELCORPORATIONICMBGENERICCHASSIS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in INTELCORPORATIONICMBGENERICCHASSIS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Intel-based multi-vendor server chassis implementing ICMB
1990s-era server hardware with out-of-band chassis management bus

Monitoring Examples

A management station could poll a1Manufacturer, a1Product, a1Version, and a1SerialNumber to build a hardware inventory of chassis components, then check a1Installation and a1Verify to confirm a component was properly installed and passed bus verification. The tIcmbState / eIcmbState objects expose the current ICMB state of the chassis bus, letting an admin detect a component that has dropped off the bus or failed verification. a12ChassisAvailable and a12IcmbId further indicate chassis-level availability and identify which ICMB instance is being queried in a multi-chassis deployment.

What Can Be Monitored

component manufacturer/model identity
hardware/firmware version
serial number
component installation status
component verification status
ICMB bus operational state

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
intel	1.3.6.1.4.1.343
products	1.3.6.1.4.1.343.2
server_products	1.3.6.1.4.1.343.2.6
platforms	1.3.6.1.4.1.343.2.6.2
icmbChassis	1.3.6.1.4.1.343.2.6.2.5
dmtfGroups	1.3.6.1.4.1.343.2.6.2.5.1
tComponentid	1.3.6.1.4.1.343.2.6.2.5.1.1		not-accessible	This group defines the attributes common to all components. This group is required.
eComponentid	1.3.6.1.4.1.343.2.6.2.5.1.1.1		not-accessible
STR a1Manufacturer	1.3.6.1.4.1.343.2.6.2.5.1.1.1.1	DmiDisplaystring	read-only	Manufacturer of this system.
STR a1Product	1.3.6.1.4.1.343.2.6.2.5.1.1.1.2	DmiDisplaystring	read-only	Product name for this system.
STR a1Version	1.3.6.1.4.1.343.2.6.2.5.1.1.1.3	DmiDisplaystring	read-only	Version number of this system.
STR a1SerialNumber	1.3.6.1.4.1.343.2.6.2.5.1.1.1.4	DmiDisplaystring	read-only	Serial number for this system.
DMI a1Installation	1.3.6.1.4.1.343.2.6.2.5.1.1.1.5	DmiDateX	read-only	The time and date when this component was installed.
INT a1Verify	1.3.6.1.4.1.343.2.6.2.5.1.1.1.6	INTEGER	read-only	A code that provides a level of verification that the component is still installed and working.
tIcmbState	1.3.6.1.4.1.343.2.6.2.5.1.12		not-accessible	Access to information on basic chassis features.
eIcmbState	1.3.6.1.4.1.343.2.6.2.5.1.12.1		not-accessible
INT a12ChassisAvailable	1.3.6.1.4.1.343.2.6.2.5.1.12.1.1	INTEGER	read-write	This attribute indicates whether the chassis is currently visible on the ICMB.
NUM a12IcmbId	1.3.6.1.4.1.343.2.6.2.5.1.12.1.2	DmiInteger	read-write	This is the bus ID of the chassis' ICMB bridge.
NUM a12SdrDeviceId	1.3.6.1.4.1.343.2.6.2.5.1.12.1.3	DmiInteger	read-only	This is the IMB address of the device providing access to the chassis Sensor Data Repository. A value of 0xff indicates there is no such device known.
NUM a12SelDeviceId	1.3.6.1.4.1.343.2.6.2.5.1.12.1.4	DmiInteger	read-only	This is the IMB address of the device providing access to thechassis System Event Log.A value of 0xff indicates there is no such device known.
NUM a12SmDeviceId	1.3.6.1.4.1.343.2.6.2.5.1.12.1.5	DmiInteger	read-only	This is the IMB address of the device providing access to thechassis System Management software.A value of 0xff indicates there is no such device known.
INT a12SdrReadState	1.3.6.1.4.1.343.2.6.2.5.1.12.1.6	INTEGER	read-write	This attribute indicates whether the chassis SDR is used topopulate the sensor tables
NUM a12EventPollingPeriod	1.3.6.1.4.1.343.2.6.2.5.1.12.1.7	DmiInteger	read-write	This is the period in seconds between polls for new chassisevent . A value of 0 disables polling.
NUM a12EventCount	1.3.6.1.4.1.343.2.6.2.5.1.12.1.8	DmiInteger	read-only	This is the number of chassis events generated.
INT a12ManageChassis	1.3.6.1.4.1.343.2.6.2.5.1.12.1.9	INTEGER	read-write	This indicates whether events should be generated for this chassis
NUM a12SetAvailablityState	1.3.6.1.4.1.343.2.6.2.5.1.12.1.10	DmiInteger	read-write	Sets chassis availability state. Writing zero to this attribute instructs the chassis to become unavailable. Writing non-zero instructs the chassis to become available.
STR a12UniqueId	1.3.6.1.4.1.343.2.6.2.5.1.12.1.11	DmiOctetstring	read-write
INT a12PreviousAvailabilityStatus	1.3.6.1.4.1.343.2.6.2.5.1.12.1.12	INTEGER	read-write
tOperationalState	1.3.6.1.4.1.343.2.6.2.5.1.31		not-accessible	This group provides the operational state, usage, and availabili y status, and administrative state indicators for specific Device Group instance .
eOperationalState	1.3.6.1.4.1.343.2.6.2.5.1.31.1		not-accessible
NUM a31OperationalStateInstanceIndex	1.3.6.1.4.1.343.2.6.2.5.1.31.1.1	DmiInteger	read-only	The Index into the Operational State table.
NUM a31DeviceGroupIndex	1.3.6.1.4.1.343.2.6.2.5.1.31.1.2	DmiInteger	read-only	The group ID of the group referencing this instance.
INT a31OperationalStatus	1.3.6.1.4.1.343.2.6.2.5.1.31.1.3	INTEGER	read-only	The operational status of the Device Group instance.
INT a31UsageState	1.3.6.1.4.1.343.2.6.2.5.1.31.1.4	INTEGER	read-only	The usage state of the Device Group instance.
INT a31AvailabilityStatus	1.3.6.1.4.1.343.2.6.2.5.1.31.1.5	INTEGER	read-only	The availability status of the Device Group instance.
INT a31AdministrativeState	1.3.6.1.4.1.343.2.6.2.5.1.31.1.6	INTEGER	read-only	The administrative state of the Device Group instance.
NUM a31FatalErrorCount	1.3.6.1.4.1.343.2.6.2.5.1.31.1.7	DmiCounter	read-only	The accumulated Fatal or Non-recoverable error count for this Device Group instance.
NUM a31MajorErrorCount	1.3.6.1.4.1.343.2.6.2.5.1.31.1.8	DmiCounter	read-only	The accumulated Major or Critical error count for this Device Group instance.
NUM a31WarningErrorCount	1.3.6.1.4.1.343.2.6.2.5.1.31.1.9	DmiCounter	read-only	The accumulated Warning or Non-Critical error count for this Device Group instance.
INT a31CurrentErrorStatus	1.3.6.1.4.1.343.2.6.2.5.1.31.1.10	INTEGER	read-only	This attribute presents the current error status for this Device Group instance. The most critical error status in effect should be presented. I.e. if a part of the Device Group instance is 'Critical', while other status is 'Non-critical' then the status'Critical' should be reported.
tFieldReplaceableUnit	1.3.6.1.4.1.343.2.6.2.5.1.93		not-accessible	A Field Replaceable Unit (FRU), is defined as a hardware component which is designed to be separately removable for replacement or repair. For the purposes of this definition, a motherboard and a fixed hard disk are FRUs, whereas a fixed hard disk platter or a chip fixed in place on the motherboard are not FRUs since they are not designed to be separately removable. Each instance within the FRU table should contain the device group and instance data for the associated hardware component.
eFieldReplaceableUnit	1.3.6.1.4.1.343.2.6.2.5.1.93.1		not-accessible
NUM a93FruIndex	1.3.6.1.4.1.343.2.6.2.5.1.93.1.1	DmiInteger	read-only	The index into the Field Replaceable Unit table.
NUM a93DeviceGroupIndex	1.3.6.1.4.1.343.2.6.2.5.1.93.1.2	DmiInteger	read-only	The group ID of the group referencing this Field Replaceable Unitinstance.
STR a93Description	1.3.6.1.4.1.343.2.6.2.5.1.93.1.3	DmiDisplaystring	read-only	A clear description of this Field Replaceable Unit.
STR a93Manufacturer	1.3.6.1.4.1.343.2.6.2.5.1.93.1.4	DmiDisplaystring	read-only	The name of the company manufacturing or providing this Field Replaceable Unit.
STR a93Model	1.3.6.1.4.1.343.2.6.2.5.1.93.1.5	DmiDisplaystring	read-only	The manufacturer's model number for this Field Replaceable Unit.
STR a93PartNumber	1.3.6.1.4.1.343.2.6.2.5.1.93.1.6	DmiDisplaystring	read-only	A part number by which a replacement part can be ordered for this Field Replaceable Unit.
STR a93FruSerialNumber	1.3.6.1.4.1.343.2.6.2.5.1.93.1.7	DmiDisplaystring	read-only	The manufacturer's serial number for this Field Replaceable Unit.
STR a93RevisionLevel	1.3.6.1.4.1.343.2.6.2.5.1.93.1.8	DmiDisplaystring	read-only	The revision level of this Field Replaceable Unit.
DMI a93WarrantyStartDate	1.3.6.1.4.1.343.2.6.2.5.1.93.1.9	DmiDateX	read-only	The start date of the service warranty for this Field Replaceabl Unit.
NUM a93WarrantyDuration	1.3.6.1.4.1.343.2.6.2.5.1.93.1.10	DmiInteger	read-only	The total duration of this Field Replaceable Unit warranty in months.
STR a93SupportPhoneNumber	1.3.6.1.4.1.343.2.6.2.5.1.93.1.11	DmiDisplaystring	read-only	The phone number(s) for support for this Field Replaceable Unit.
STR a93FruInternetUniformResourceLocator	1.3.6.1.4.1.343.2.6.2.5.1.93.1.12	DmiDisplaystring	read-only	The Internet Uniform Resource Locator string that can be used through a World Wide Web browser to obtain further information about this FRU
tEventGenerationForPhysicalContainer	1.3.6.1.4.1.343.2.6.2.5.1.116		not-accessible
eEventGenerationForPhysicalContainer	1.3.6.1.4.1.343.2.6.2.5.1.116.1		not-accessible
NTF trap1ForPhysicalContainer	1.3.6.1.4.1.343.2.6.2.5.1.116.1.0.6			Container Security Breached
NTF trap2ForPhysicalContainer	1.3.6.1.4.1.343.2.6.2.5.1.116.1.0.256			Container Secured
INT a116EventType	1.3.6.1.4.1.343.2.6.2.5.1.116.1.1	INTEGER	read-only	The type of event that has occurred.
INT a116EventSeverity	1.3.6.1.4.1.343.2.6.2.5.1.116.1.2	INTEGER	read-only	The severity of this event.
INT a116IsEventState_based	1.3.6.1.4.1.343.2.6.2.5.1.116.1.3	INTEGER	read-only	The value of this attribute determines whether the Event being reported is a state-based Event or not. If the value of this attribute is TRUE then the Event is state-based. Otherwise the Event is not state-based.
NUM a116EventStateKey	1.3.6.1.4.1.343.2.6.2.5.1.116.1.4	DmiInteger	read-only	A unique, single integer key into the Event State group if this is a state-based Event. If this is not a state-based Event then this attribute's value is not defined.
STR a116AssociatedGroup	1.3.6.1.4.1.343.2.6.2.5.1.116.1.5	DmiDisplaystring	read-only	The class name of the group that is associated with the events defined in this Event Generation group.
INT a116EventSystem	1.3.6.1.4.1.343.2.6.2.5.1.116.1.6	INTEGER	read-only	The major functional aspect of the product causing the fault.
INT a116EventSubsystem	1.3.6.1.4.1.343.2.6.2.5.1.116.1.7	INTEGER	read-only	The minor functional aspect of the product causing the fault.
tPhysicalContainerGlobalTable	1.3.6.1.4.1.343.2.6.2.5.1.127		not-accessible	This group of attributes describes the fields in a row of the Physical Container Global Table. This table lists all of the containers (e.g. chassis, sub-chassis, etc.) included within the component whose structure is being described.
ePhysicalContainerGlobalTable	1.3.6.1.4.1.343.2.6.2.5.1.127.1		not-accessible
INT a127ContainerOrChassisType	1.3.6.1.4.1.343.2.6.2.5.1.127.1.1	INTEGER	read-only	The type of container or chassis.
STR a127AssetTag	1.3.6.1.4.1.343.2.6.2.5.1.127.1.2	DmiDisplaystring	read-write	The Container asset tag string.This asset tag string is writeabl by the system administrator.
INT a127ChassisLockPresent	1.3.6.1.4.1.343.2.6.2.5.1.127.1.3	INTEGER	read-only	If true, a chassis lock is present on the Container.
INT a127BootupState	1.3.6.1.4.1.343.2.6.2.5.1.127.1.4	INTEGER	read-only	The current state of this system when it booted.
INT a127PowerState	1.3.6.1.4.1.343.2.6.2.5.1.127.1.5	INTEGER	read-only	The current state of the power supply for this system.
INT a127ThermalState	1.3.6.1.4.1.343.2.6.2.5.1.127.1.6	INTEGER	read-only	The current thermal state of this Container.
NUM a127FruGroupIndex	1.3.6.1.4.1.343.2.6.2.5.1.127.1.7	DmiInteger	read-only	If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU.
NUM a127OperationalGroupIndex	1.3.6.1.4.1.343.2.6.2.5.1.127.1.8	DmiInteger	read-only	The index into the Operational State table for this device if applicable.
NUM a127ContainerIndex	1.3.6.1.4.1.343.2.6.2.5.1.127.1.9	DmiInteger	read-only	A unique index for the Physical Container in Physical Container Global Table.
STR a127ContainerName	1.3.6.1.4.1.343.2.6.2.5.1.127.1.10	DmiDisplaystring	read-write	This is any 64-octet long name that the user or system administr tor wishes to give this specific physical container.
STR a127ContainerLocation	1.3.6.1.4.1.343.2.6.2.5.1.127.1.11	DmiDisplaystring	read-write	This attribute is a string name for the location of the containe . This attribute is Read-Write and may be set to any appropriate value by the user. The string may be 128 octets long.
INT a127ContainerSecurityStatus	1.3.6.1.4.1.343.2.6.2.5.1.127.1.12	INTEGER	read-only	This attribute describes whether the Container is physically secure or not. This includes the state of the door lock, or the boot devices or the keyboard or mouse.
tMiftomib	1.3.6.1.4.1.343.2.6.2.5.1.1001		not-accessible	This group defines attributes required for DMI to SNMP translati n.
eMiftomib	1.3.6.1.4.1.343.2.6.2.5.1.1001.1		not-accessible
STR a1001MibName	1.3.6.1.4.1.343.2.6.2.5.1.1001.1.1	DmiDisplaystring	read-only	The MIB name that defines this MIF
STR a1001MibOid	1.3.6.1.4.1.343.2.6.2.5.1.1001.1.2	DmiDisplaystring	read-only	The MIB Object Identifier that corresponds to this MIF
NUM a1001DisableTrap	1.3.6.1.4.1.343.2.6.2.5.1.1001.1.3	DmiInteger	read-write	This attribute can be changed to disable sending oftraps from this component
tSystemControl	1.3.6.1.4.1.343.2.6.2.5.1.1004		not-accessible	Status and control of global system control features.
eSystemControl	1.3.6.1.4.1.343.2.6.2.5.1.1004.1		not-accessible
NUM a1004Selfid	1.3.6.1.4.1.343.2.6.2.5.1.1004.1.1	DmiInteger	read-only	A unique number that identifies this row.
INT a1004ResetSystem	1.3.6.1.4.1.343.2.6.2.5.1.1004.1.2	INTEGER	read-write	Writing to the attribute initiates an immediate system hard reset. The value for this attribute is either Do Not Reset or Initiate Reset.
NUM a1004TimedResetIncrement	1.3.6.1.4.1.343.2.6.2.5.1.1004.1.3	DmiInteger	read-only	This attribute contains the increments in which a timed reset can be set, in microseconds.
NUM a1004TimedResetResolution	1.3.6.1.4.1.343.2.6.2.5.1.1004.1.4	DmiInteger	read-only	This attribute contains the resolution to which a Timed Reset can be set, in microseconds. For example, a resolution of 1 second and an increment of 10 seconds would indicate that a 10 second delay interval setting produces a 9 to 10 second delay.
NUM a1004TimeUntilSystemReset	1.3.6.1.4.1.343.2.6.2.5.1.1004.1.5	DmiInteger	read-write	This attribute contains the interval for timed resets, in units of the Timed Reset Increment attribute. Writing a non-zero value, and setting the Timed Reset Enable on, initiates a timed reset countdown.
INT a1004SystemPowerCapabilities	1.3.6.1.4.1.343.2.6.2.5.1.1004.1.6	INTEGER	read-only	This attribute describes the system power control capabilities. It can have one of the following values: Unknown, On And Off, Off Only, or On Only.
INT a1004SystemPowerStatus	1.3.6.1.4.1.343.2.6.2.5.1.1004.1.7	INTEGER	read-write	This attribute provides access to the status and control of system power. Its value is either On or Off.
INT a1004EventLoggingCapability	1.3.6.1.4.1.343.2.6.2.5.1.1004.1.8	INTEGER	read-only	This attribute describes the Event Logging Capabilities. The attribute value can be : Unknown, Unsupported, Active, or Inactive. If the Event logging capability is Active, the BIOS logs the system errors to the FLASH. The LSC reads this FLASH log and takes appropriate actions. If this feature is Inactive, the LSC will read the values from the system registers directly. The Event logging capability can be set to Active or Inactive using the System Configuration Utility (SCU).
NUM a1004WatchdogTimerIncrement	1.3.6.1.4.1.343.2.6.2.5.1.1004.1.9	DmiInteger	read-only	This attribute contains the increments in which a watchdog update interval can be set. This value is maintained internally by instrumentati n code in microseconds. In LSC Local Console, this value is shown in Seconds.
NUM a1004WatchdogTimerResolution	1.3.6.1.4.1.343.2.6.2.5.1.1004.1.10	DmiInteger	read-only	Resolution to which a watchdog update interval can be set. For example, a watchdog timer resolution of R microsecond and an watchdog timer increment of I microseconds would indicate that a watchdog update interva setting of N will produce a (NI)-R to (NI) microseconds delay. In LSC Local Console, this value is shown in Seconds.
NUM a1004WatchdogUpdateInterval	1.3.6.1.4.1.343.2.6.2.5.1.1004.1.11	DmiInteger	read-write	This attribute specifies the Interval for watchdog resets, in minutes. If the system software does not update the watchdog timer within this interval, a hard reset will occur. Selecting a non-zero value for this attribute and setting the Use System Watchdog Feature attribute to 'On' starts the watchdog reset timer countdown.
INT a1004UseSystemWatchdogFeature	1.3.6.1.4.1.343.2.6.2.5.1.1004.1.12	INTEGER	read-write	If this value is On, then the Watchdog feature is enabled and the Watchdog Update Interval value is valid. If enabled this feature automatically resets the server if the LSC software does not reset the watchdog timer within the specified Watchdog Update Interval. NOTE : This is a hard reset that will immediately reset the system without taking NetWare down. This might result in some files being corrupted.
INT a1004ResetSystemAfterDelay	1.3.6.1.4.1.343.2.6.2.5.1.1004.1.13	INTEGER	read-write	This attribute controls whether or not the timed reset function is enabled. If the value is On, then the system will reset when the Timed Reset Interval expires.
INT a1004SavePersistentData	1.3.6.1.4.1.343.2.6.2.5.1.1004.1.15	INTEGER	read-write	When this attribute value is set to ON all the persistent data like thresholds are stored into the persistent data Table.
INT a1004RestoreFactoryDefaults	1.3.6.1.4.1.343.2.6.2.5.1.1004.1.16	INTEGER	read-write	When this attribute value is set to ON all the Factory default thresholds are restored.
INT a1004ShutdownOs	1.3.6.1.4.1.343.2.6.2.5.1.1004.1.17	INTEGER	read-write	Writing to this attribute initiates an immediate OS shutdown. The value of this attribute is either Do Not Shutdown or Shutdown OS.
INT a1004ShutdownOsAndPowerOff	1.3.6.1.4.1.343.2.6.2.5.1.1004.1.18	INTEGER	read-write	Writing to this attribute initiates an immediate OS shutdown and Power Off of the system. The value of this attribute is either Do Not Shutdown and Power Off or Shutdown OS and Power Off.
INT a1004ShutdownOsAndHardwareReset	1.3.6.1.4.1.343.2.6.2.5.1.1004.1.19	INTEGER	read-write	Writing to this attribute initiates an immediate OS shutdown. The value of this attribute is either Do Not Shutdown and Hardware Reset or Shutdown OS and Hardware Reset.
INT a1004IssueAHardwareNmi	1.3.6.1.4.1.343.2.6.2.5.1.1004.1.20	INTEGER	read-write	Writing to this attribute causes a hardware NMI (Non Maskabale Interrup). It will have one of the two values. Issue an NMI, or Do Not Issue an NMI
tSystemEventLog	1.3.6.1.4.1.343.2.6.2.5.1.1006		not-accessible	This group provides raw access to System Event Log (SEL) recordsThis data is intended for use by a Service & Support person
eSystemEventLog	1.3.6.1.4.1.343.2.6.2.5.1.1006.1		not-accessible
NUM a1006Selfid	1.3.6.1.4.1.343.2.6.2.5.1.1006.1.1	DmiInteger	read-only	A unique number that identifies this row.
DMI a1006Timestamp	1.3.6.1.4.1.343.2.6.2.5.1.1006.1.2	DmiDateX	read-only	The time and date when this record was written.
NUM a1006RecordType	1.3.6.1.4.1.343.2.6.2.5.1.1006.1.3	DmiInteger	read-only	Type of this record.
NUM a1006RecordLength	1.3.6.1.4.1.343.2.6.2.5.1.1006.1.4	DmiInteger	read-only	Length of this record.
STR a1006RecordData	1.3.6.1.4.1.343.2.6.2.5.1.1006.1.5	DmiOctetstring	read-only	Binary Data associated with this record
tEventGenerationForIcmbState	1.3.6.1.4.1.343.2.6.2.5.1.1007		not-accessible
eEventGenerationForIcmbState	1.3.6.1.4.1.343.2.6.2.5.1.1007.1		not-accessible
NTF trap1ForIcmbState	1.3.6.1.4.1.343.2.6.2.5.1.1007.1.0.1			Chassis availability change
INT a1007EventType	1.3.6.1.4.1.343.2.6.2.5.1.1007.1.1	INTEGER	read-only	The type of event that has occurred.
INT a1007EventSeverity	1.3.6.1.4.1.343.2.6.2.5.1.1007.1.2	INTEGER	read-only	The severity of this event.
INT a1007IsEventState_based	1.3.6.1.4.1.343.2.6.2.5.1.1007.1.3	INTEGER	read-only	The value of this attribute determines whether the Event being reported is a state-based Event or not. If the value of this attribute is TRUE then the Event is state-based. Otherwise the Event is not state-based.
NUM a1007EventStateKey	1.3.6.1.4.1.343.2.6.2.5.1.1007.1.4	DmiInteger	read-only	A unique, single integer key into the Event State group if this is a state-based Event. If this is not a state-based Event then this attribute's value is not defined.
STR a1007AssociatedGroup	1.3.6.1.4.1.343.2.6.2.5.1.1007.1.5	DmiDisplaystring	read-only	The class name of the group that is associated with the events defined in this Event Generation group.
INT a1007EventSystem	1.3.6.1.4.1.343.2.6.2.5.1.1007.1.6	INTEGER	read-only	The major functional aspect of the product causing the fault.
INT a1007EventSubsystem	1.3.6.1.4.1.343.2.6.2.5.1.1007.1.7	INTEGER	read-only	The minor functional aspect of the product causing the fault.
tEifControl	1.3.6.1.4.1.343.2.6.2.5.1.2000		not-accessible	Special control group for use with EIF
eEifControl	1.3.6.1.4.1.343.2.6.2.5.1.2000.1		not-accessible
INT a2000Status	1.3.6.1.4.1.343.2.6.2.5.1.2000.1.1	INTEGER	read-write	Current status of this component as set by EIF
STR a2000DimContext	1.3.6.1.4.1.343.2.6.2.5.1.2000.1.2	DmiOctetstring	read-write	Opaque data used by DIM objects to obtain their context informat on from some invocating source. It is assumed that the DIMs will be able to usefully parse the information in this attribute, as the 'mainline' DMI code in the CI makes no attempt to understand it.
NUM a2000PersistentDataWriteDelay	1.3.6.1.4.1.343.2.6.2.5.1.2000.1.3	DmiInteger	read-write	Defines the timeout from an attribute set operation until the presistent write operation is invoked. If another set operation takes place during this period, the timeout timer is reset back to this value, so a persistent write operation will only take place after the specified period has elasped with no set operations. Timeout is specified in 1/10 second quantity. If set to zero, no persistent write operation will occur.
STR a2000EifInterfaceName	1.3.6.1.4.1.343.2.6.2.5.1.2000.1.4	DmiDisplaystring	read-only	EIF Interface Name used to distinguish the component type this MIF file represents.
tEifExtensionList	1.3.6.1.4.1.343.2.6.2.5.1.2001		not-accessible	A specific extension library specification
eEifExtensionList	1.3.6.1.4.1.343.2.6.2.5.1.2001.1		not-accessible
NUM a2001Index	1.3.6.1.4.1.343.2.6.2.5.1.2001.1.1	DmiInteger	read-only	row index
STR a2001Filename	1.3.6.1.4.1.343.2.6.2.5.1.2001.1.2	DmiDisplaystring	read-only	name of extension library
tEventGenerationForEifControl	1.3.6.1.4.1.343.2.6.2.5.1.2002		not-accessible
eEventGenerationForEifControl	1.3.6.1.4.1.343.2.6.2.5.1.2002.1		not-accessible
NTF trap1ForEifControl	1.3.6.1.4.1.343.2.6.2.5.1.2002.1.0.1			No DIM Context created
INT a2002EventType	1.3.6.1.4.1.343.2.6.2.5.1.2002.1.1	INTEGER	read-only	The type of event that has occurred.
INT a2002EventSeverity	1.3.6.1.4.1.343.2.6.2.5.1.2002.1.2	INTEGER	read-only	The severity of this event.
INT a2002IsEventState_based	1.3.6.1.4.1.343.2.6.2.5.1.2002.1.3	INTEGER	read-only	The value of this attribute determines whether the Event being reported is a state-based Event or not. If the value of this attribute is TRUE then the Event is state-based. Otherwise the Event is not state-based.
NUM a2002EventStateKey	1.3.6.1.4.1.343.2.6.2.5.1.2002.1.4	DmiInteger	read-only	A unique, single integer key into the Event State group if this is a state-based Event. If this is not a state-based Event then this attribute's value is not defined.
STR a2002AssociatedGroup	1.3.6.1.4.1.343.2.6.2.5.1.2002.1.5	DmiDisplaystring	read-only	The class name of the group that is associated with the events defined in this Event Generation group.
INT a2002EventSystem	1.3.6.1.4.1.343.2.6.2.5.1.2002.1.6	INTEGER	read-only	The major functional aspect of the product causing the fault.
INT a2002EventSubsystem	1.3.6.1.4.1.343.2.6.2.5.1.2002.1.7	INTEGER	read-only	The minor functional aspect of the product causing the fault.

RFC description

Intel ICMB generic chassis MIB for remote ICMB-accessed chassis monitoring and control.

Start monitoring Intel-based server chassis implementing ICMB (1990s-era) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download INTELCORPORATIONICMBGENERICCHASSIS-MIB

What Is INTELCORPORATIONICMBGENERICCHASSIS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description