HPN-ICF-IPX-MIB

All MIBs › HPN-ICF-IPX-MIB

Last Updated: 2004-12-24

Category: IP and Core Protocols, SNA and Legacy Protocols, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Manages IPX (Internetwork Packet Exchange) routing and interface configuration on HP/Comware devices supporting legacy Novell protocols.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-IPX-MIB?

This MIB manages the legacy Novell IPX (Internetwork Packet Exchange) protocol stack on HP/Comware routers and switches, covering IPX interface configuration, RIP (routing) and SAP (service advertisement) state, and related statistics. It belongs to the HP/H3C ICF family and is organized into four functional groups: per-interface IPX configuration/statistics, RIP routing status, SAP service information, and general IPX protocol statistics. For monitoring purposes it exposes interface-level software state such as hpnicfIpxStatus (protocol enable state) and per-interface counters and settings via hpnicfIpxIfConfigTable, letting an operator confirm that legacy IPX routing and service advertisement are functioning correctly on a given interface. IPX is an older, largely deprecated Novell NetWare protocol with no relationship to modern IETF IP-based standard MIBs, so this module is entirely proprietary and legacy-oriented. It is deployed only in legacy environments where HP/Comware devices still route or bridge traffic for older Novell NetWare-based networks. Engineers can download the HPN-ICF-IPX-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-IPX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP/Comware router (legacy IPX/Novell NetWare environment)
HP/Comware switch
HP/H3C Comware routers and switches (legacy IPX/Novell NetWare support)

Monitoring Examples

An administrator would check hpnicfIpxStatus to confirm IPX routing is globally enabled, then poll hpnicfIpxIfConfigTable/hpnicfIpxIfConfigEntry (indexed by hpnicfIpxIfIndex) to read hpnicfIpxIfNetId and hpnicfIpxIfNodeId for a given interface. If hpnicfIpxIfSplitHorizon or hpnicfIPxIfTick is misconfigured, RIP updates may fail to propagate across the IPX network, which the operator can correlate with route-table gaps reported under hpnicfIpxRip. hpnicfIpxSap exposes service advertisement state useful for confirming NetWare file/print services remain visible on the segment.

What Can Be Monitored

IPX protocol enable status
per-interface IPX network/node ID
RIP route status
SAP service advertisements
IPX interface encapsulation type
split-horizon/RIP timer settings

Imported Objects

From HPN-ICF-OID-MIB

hpnicfCommon

OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using hpnicfIpxStatTotalReceives OID:

Select an HP/H3C Comware router or switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hpnicfIpxStatTotalReceives into the Find box to locate it in the OID tree, then select it and click OK. The total number of packets received. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfIpx	1.3.6.1.4.1.11.2.14.11.15.2.34			This MIB defines management information used on products which support ipx protocol. It includes 4 parts: 1.ipx interface configuration group - This group contains configurable management information and statistic information on each interface. 2.rip group - Rip means route information protocol. This group contains configurable management information and route status and route statistic information. 3.sap group - Sap means service access group. This group contains all service information. 4.ipx statistics group - This group includes ipx statistic information on all interfaces.
hpnicfIpxConfig	1.3.6.1.4.1.11.2.14.11.15.2.34.1
ENA hpnicfIpxStatus	1.3.6.1.4.1.11.2.14.11.15.2.34.1.1	EnabledStatus	read-write	This object is used to enable or disable ipx globally.
hpnicfIpxIfConfigTable	1.3.6.1.4.1.11.2.14.11.15.2.34.1.2		not-accessible	Table of configurable management information on each interface.
hpnicfIpxIfConfigEntry	1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1		not-accessible	An entry in the table, containing management information about a single interface.
I32 hpnicfIpxIfIndex	1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.1	Integer32	not-accessible	This variable uniquely identifies the interface to which the configurations are applied.
OCT hpnicfIpxIfNetId	1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.2	OCTET STRING	read-create	The network number of the IPX address of this interface.
OCT hpnicfIpxIfNodeId	1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.3	OCTET STRING	read-only	The node number of the IPX address of this interface.
ENA hpnicfIpxIfSplitHorizon	1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.4	EnabledStatus	read-create	This node is used to set the split horizon status. Its default value is 'enabled'. In this case, the interface which receives a message can't send this message from the same interface. This function can avoid route loop. But it is unused for point to point link. If it is set to 'disabled', split horizon is disable.
I32 hpnicfIPxIfTick	1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.5	Integer32	read-create	This object is used to set this interface's delay time. It is counted by ticks which is 1/18 second. By default, the ethernet interface's delay time is 1 tick, asynchronous serial interface's delay time is 30 ticks, WAN interface's delay time is 6 ticks.
ENA hpnicfIpxIfUpdateChangeOnly	1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.6	EnabledStatus	read-create	When this variable is set to 'enabled', updating change is on. And sap and rip will send updating packets periodically to avoid broadcast storm. Whereas updating change is off.
I32 hpnicfIpxIfRipMtu	1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.7	Integer32	read-create	This variable is used to define the max length of RIP updating packets.
INT hpnicfIpxIfEncapsuleType	1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.8	INTEGER	read-create	This node is used to define the encapsulating form of IPX packets. 'dot2' indicates the form is 802.2, while 'dot3' means 802.3. And 'snap' indicates the form is ethernet-snap. It takes effect only on ethernet interface, and the default value is 'dot3', while 'unkown' for other types of port.
ENA hpnicfIpxIfNetbiosPropagation	1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.9	EnabledStatus	read-create	This node is used to configure whether the current interface can forward broadcasting packets which IPX type is 20 used for NetBIOS.
ENA hpnicfIpxIfSapStatus	1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.10	EnabledStatus	read-create	The status of sap on the current interface. It is enabled when ipx is enabled on this interface.
I32 hpnicfIpxIfSapMtu	1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.11	Integer32	read-create	This variable is used to define the max length of SAP refreshing packets.
ENA hpnicfIpxIfGnsReply	1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.12	EnabledStatus	read-create	This object is used to enable or disable the current interface to response the IPX GNS request.
ROW hpnicfIpxIfRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.13	RowStatus	read-create	The status of this row. To create a row, user can select 'createAndGo'. If the row is created successfully, this object will became 'active'. To delete one row, user can select 'destory' and the row will be deleted.
hpnicfIpxRip	1.3.6.1.4.1.11.2.14.11.15.2.34.2
I32 hpnicfIpxRouteMultiplier	1.3.6.1.4.1.11.2.14.11.15.2.34.2.1	Integer32	read-write	This node is used to calculate Rip aging time of route information. The absolute aging time = (hpnicfIpxRouteMultiplier * hpnicfIpxRouteUpdateTimer).
I32 hpnicfIpxRouteUpdateTimer	1.3.6.1.4.1.11.2.14.11.15.2.34.2.2	Integer32	read-write	This node is used to set rip updating time which is based on seconds
ENA hpnicfIpxRouteImpRouteStatic	1.3.6.1.4.1.11.2.14.11.15.2.34.2.3	EnabledStatus	read-write	This object determines whether static route can be imported.
I32 hpnicfIpxRouteLoadBalancePaths	1.3.6.1.4.1.11.2.14.11.15.2.34.2.4	Integer32	read-write	This object defines the max equivalent paths to the same destination. If the newly defined value is smaller than the current value, the routes out of the new value will be set inactive.
I32 hpnicfIpxRouteMaxResPaths	1.3.6.1.4.1.11.2.14.11.15.2.34.2.5	Integer32	read-write	This object defines the max dynamic routes to the same destination. If the newly defined value is smaller than the current value, the routes will not be deleted until they age out or are deleted manually.
hpnicfIpxRouteTable	1.3.6.1.4.1.11.2.14.11.15.2.34.2.6		not-accessible	This table contains all dynamic and direct ipx route information of this system. The information of this table is read only.
hpnicfIpxRouteEntry	1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1		not-accessible	Each entry includes a dynamic or direct route.
I32 hpnicfIpxRouteIndex	1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.1	Integer32	not-accessible	This object uniquely identifies a route.
OCT hpnicfIpxRouteDestNetId	1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.2	OCTET STRING	read-only	The destination network number of this route information, and its value ranges from 1 to 0xfffffffe.
OCT hpnicfIpxRouteNextHop	1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.3	OCTET STRING	read-only	The next hop of this route.
INT hpnicfIpxRoutePro	1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.4	INTEGER	read-only	The protocol type of this route information.
I32 hpnicfIpxRoutePre	1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.5	Integer32	read-only	The preference of this route information. The direct route's preference is 0, and it can't be modified. Dynamic route's default preference is 100.
I32 hpnicfIpxRouteTicks	1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.6	Integer32	read-only	The time, in ticks, that the packet takes to reach the destination.
I32 hpnicfIpxRouteHops	1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.7	Integer32	read-only	The object indicates the number of hops that the packet must be passed through to reach the destination.
I32 hpnicfIpxRouteTime	1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.8	Integer32	read-only	The aging time of this route information. The aging time of static and interface route information is 0.
OCT hpnicfIpxRouteOutInterface	1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.9	OCTET STRING	read-only	The out interface of this route information.
hpnicfIpxStaticRouteTable	1.3.6.1.4.1.11.2.14.11.15.2.34.2.7		not-accessible	This table contains all static ipx route information of this system.
hpnicfIpxStaticRouteEntry	1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1		not-accessible	Each entry includes one static route information.
OCT hpnicfIpxStaticRouteDestNetId	1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1.1	OCTET STRING	not-accessible	The index of Static Route Table. This object and hpnicfIpxStaticRouteNextHop uniquely identify a static route. The destination network number of this static route information,and its value ranges from 1 to 0xfffffffe. Note that the broadcast network number is 0xffffffff and is not allowed in IPX. The network number of 0xfffffffe would be considered to be the network number of default route.
OCT hpnicfIpxStaticRouteNextHop	1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1.2	OCTET STRING	not-accessible	The sub-index of Static Route Table. The next hop of this static route information.
I32 hpnicfIpxStaticRoutePre	1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1.3	Integer32	read-create	The preference of this route information. Static route's preference is 60, and it can be configured.
OCT hpnicfIpxStaticRouteOutIf	1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1.4	OCTET STRING	read-create	The out interface of this route. This interface can be serial or pos interface.
I32 hpnicfIpxStaticRouteTicks	1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1.5	Integer32	read-create	The time, in ticks that the packet takes to reach the destination with the static route.
I32 hpnicfIpxStaticRouteHops	1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1.6	Integer32	read-create	This object indicates how many hops are needed to arrive at the destination network.
INT hpnicfIpxStaticRouteStatus	1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1.7	INTEGER	read-create	The status of this static route.
ROW hpnicfIpxStaticRouteRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1.8	RowStatus	read-create	The status of this row. To create a row, user can select 'createAndGo'. If the row is created successfully, this object will became 'active'. To delete one row, user can select 'destory' and the row will be deleted.
hpnicfIpxRouteStatTable	1.3.6.1.4.1.11.2.14.11.15.2.34.2.8		not-accessible	A table includes all statistic route information.
hpnicfIpxRouteStatEntry	1.3.6.1.4.1.11.2.14.11.15.2.34.2.8.1		not-accessible	An entry records a statistic information of route.
INT hpnicfIpxRouteStatPro	1.3.6.1.4.1.11.2.14.11.15.2.34.2.8.1.1	INTEGER	not-accessible	The protocol type of the route information. The value of 'total' is the total amount of all kinds of IPX routes.
C32 hpnicfIpxRouteStatRoutes	1.3.6.1.4.1.11.2.14.11.15.2.34.2.8.1.2	Counter32	read-only	The route amount of the corresponding protocol type.
C32 hpnicfIpxRouteStatActives	1.3.6.1.4.1.11.2.14.11.15.2.34.2.8.1.3	Counter32	read-only	The active route amount of the corresponding protocol type.
C32 hpnicfIpxRouteStatAddeds	1.3.6.1.4.1.11.2.14.11.15.2.34.2.8.1.4	Counter32	read-only	The added route amount of the corresponding protocol type.
C32 hpnicfIpxRouteStatDeleteds	1.3.6.1.4.1.11.2.14.11.15.2.34.2.8.1.5	Counter32	read-only	The deleted but not freed route amount of the corresponding protocol type.
C32 hpnicfIpxRouteStatFreeds	1.3.6.1.4.1.11.2.14.11.15.2.34.2.8.1.6	Counter32	read-only	The freed route amount of the corresponding protocol type.
hpnicfIpxSap	1.3.6.1.4.1.11.2.14.11.15.2.34.3
I32 hpnicfIpxSapMultiplier	1.3.6.1.4.1.11.2.14.11.15.2.34.3.1	Integer32	read-write	This node is used to calculate aging time of service information. The absolute aging time = (hpnicfIpxSapMultiplier * hpnicfIpxSapUpdateTimer).
I32 hpnicfIpxSapUpdateTimer	1.3.6.1.4.1.11.2.14.11.15.2.34.3.2	Integer32	read-write	This node is used to set service packet updating time which is based on seconds.
ENA hpnicfIpxSapGnsLoadBalance	1.3.6.1.4.1.11.2.14.11.15.2.34.3.3	EnabledStatus	read-write	This object is used to set whether the system will reply to the GNS request with the Round-Robin way. By default, the system will response to the GNS request with the servers known to the device in turn, preventing from the nearest server's over loading. With value of disabled, in this way, the system will response to the request with the nearest server(who has smallest hop in system's service information table).
I32 hpnicfIpxSapMaxResServers	1.3.6.1.4.1.11.2.14.11.15.2.34.3.4	Integer32	read-write	This object is used to configure maximum number of servers of a type. If the newly defined value is smaller than the previous value, the information out of the value will not be deleted. If the queue reaches to the maximum number, no new information can be added.
hpnicfIpxServiceTable	1.3.6.1.4.1.11.2.14.11.15.2.34.3.5		not-accessible	This table inlcudes all dynamic service information. The dynamic service information can be read only.
hpnicfIpxServiceEntry	1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1		not-accessible	One entry records one service
I32 hpnicfIpxServiceIndex	1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.1	Integer32	not-accessible	This object uniquely identifies a service information.
OCT hpnicfIpxServiceName	1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.2	OCTET STRING	read-only	The name of the service.
OCT hpnicfIpxServiceType	1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.3	OCTET STRING	read-only	The service type.
OCT hpnicfIpxServiceNetId	1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.4	OCTET STRING	read-only	The IPX network number portion of the IPX address of the service.
OCT hpnicfIpxServiceNodeId	1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.5	OCTET STRING	read-only	The IPX node number portion of the IPX address of the service.
OCT hpnicfIpxServiceSocketNo	1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.6	OCTET STRING	read-only	The socket portion of the IPX address of the service
I32 hpnicfIpxServicePreference	1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.7	Integer32	read-only	The service preference of the service
I32 hpnicfIpxServiceHops	1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.8	Integer32	read-only	The hops from the device to the server.
OCT hpnicfIpxServiceRecvIf	1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.9	OCTET STRING	read-only	Interface from which the service is receieved
hpnicfIpxStaticServiceTable	1.3.6.1.4.1.11.2.14.11.15.2.34.3.6		not-accessible	This table inlcudes all static service information. This table supports to creation and deletione of a static service, but not supports to modification
hpnicfIpxStaticServiceEntry	1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1		not-accessible	An entry records one service
OCT hpnicfIpxStaticServiceType	1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.1	OCTET STRING	not-accessible	The index of static service table.
OCT hpnicfIpxStaticServiceName	1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.2	OCTET STRING	not-accessible	The sub-index of static service table. The name of the service.
OCT hpnicfIpxStaticServiceNetId	1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.3	OCTET STRING	not-accessible	The sub-index of static service table. The IPX network number portion of the IPX address of the service.
OCT hpnicfIpxStaticServiceNodeId	1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.4	OCTET STRING	read-create	The IPX node number portion of the IPX address of the service.
OCT hpnicfIpxStatciServiceSocketNo	1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.5	OCTET STRING	read-create	The socket portion of the IPX address of the service.
I32 hpnicfIpxStaticServicePreference	1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.6	Integer32	read-create	The service preference of the server.
I32 hpnicfIpxStaticServiceHops	1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.7	Integer32	read-create	The hops from the device to the server.
INT hpnicfIpxStaticServiceStatus	1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.8	INTEGER	read-create	The status of the service that you created. The value of this object is determined by system.
ROW hpnicfIpxStaticServiceRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.9	RowStatus	read-create	The status of this row. To create a row, user can select 'createAndGo'. If the row is created successfully, this object will became 'active'. To delete one row, user can select 'destory' and the row will be deleted.
hpnicfIpxStat	1.3.6.1.4.1.11.2.14.11.15.2.34.4
hpnicfIpxStatGlobal	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1
C32 hpnicfIpxStatTotalReceivesEx	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.1	Counter32	read-only	The total number of packets received.
C32 hpnicfIpxStatPitchs	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.2	Counter32	read-only	The number of received packets filled by device when forwarding or delivering up to upper protocol.
C32 hpnicfIpxStatLenErrors	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.3	Counter32	read-only	The number of received packets discarded due to length error.
C32 hpnicfIpxStatFormatErrors	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.4	Counter32	read-only	The number of received packets discarded due to format error.
C32 hpnicfIpxStatBadHops	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.5	Counter32	read-only	The number of received packets which's value of field Hops is greater than 16.
C32 hpnicfIpxStatHopsDiscards	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.6	Counter32	read-only	The number of received packets of which hops portion is equal to 16.
C32 hpnicfIpxStatOtherErrors	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.7	Counter32	read-only	The number of received packets discarded due to other error.
C32 hpnicfIpxStatLocalDests	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.8	Counter32	read-only	The number of received packets which destination is the local device. Note that this would include the IPX NetBIOS propagation packets and those broadcast packets just to the network on which local device resides.
C32 hpnicfIpxStatCantDeals	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.9	Counter32	read-only	The number of received packets with which can't be dealt. One possible reason for discarding such a packet would be receiving a packet of an unknown or unsupported protocol.
C32 hpnicfIpxStatForwards	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.10	Counter32	read-only	The number of received packets to be forwarded in the case that the entity was not their final destination.
C32 hpnicfIpxStatGenerates	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.11	Counter32	read-only	The number of sent packets that the device generated itself.
C32 hpnicfIpxStatNoRoutes	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.12	Counter32	read-only	The number of packets discarded due to no route to the destination was found in routing table.
C32 hpnicfIpxStatOutDiscards	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.13	Counter32	read-only	The number of packets to be discarded when sending out. Note that this counter would not include the packet(s) discarded due to no route.
C32 hpnicfIpxStatRipSends	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.14	Counter32	read-only	The total number of RIP packets sent.
C32 hpnicfIpxStatRipReceives	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.15	Counter32	read-only	The total number of RIP packets received.
C32 hpnicfIpxStaRipRspSends	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.16	Counter32	read-only	The total number of RIP response packets sent.
C32 hpnicfIpxStaRipRspReceives	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.17	Counter32	read-only	The total number of RIP response packets received.
C32 hpnicfIpxStatRipReqReceives	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.18	Counter32	read-only	The total number of RIP request packets received.
C32 hpnicfIpxStatRipReqDeals	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.19	Counter32	read-only	The total number of RIP request packets dealt with.
C32 hpnicfIpxStatRipReqSends	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.20	Counter32	read-only	The total number of RIP request packets sent.
C32 hpnicfIpxStatRipPeriUpdates	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.21	Counter32	read-only	The total number of periodic update RIP packets sent.
C32 hpnicfIpxStatSapGenReqReceives	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.22	Counter32	read-only	The total number of SAP general request packets received.
C32 hpnicfIpxStatSapSpecReqReceives	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.23	Counter32	read-only	The total number of SAP specific request packets received.
C32 hpnicfIpxStatSapGnsReqReceives	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.24	Counter32	read-only	The total number of SAP GNS request packets received.
C32 hpnicfIpxStatSapGenRspSends	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.25	Counter32	read-only	The total number of SAP general response packets sent.
C32 hpnicfIpxStatSapSpecRspSends	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.26	Counter32	read-only	The total number of SAP specific response packets sent.
C32 hpnicfIpxStatSapGnsRspSends	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.27	Counter32	read-only	The total number of SAP GNS response packets sent.
C32 hpnicfIpxStatSapPeriUpdates	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.28	Counter32	read-only	The total number of SAP periodic update packets sent.
C32 hpnicfIpxStatSapInPktErrors	1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.29	Counter32	read-only	The total number of SAP error packets received.
hpnicfIpxStatInterface	1.3.6.1.4.1.11.2.14.11.15.2.34.4.2
hpnicfIpxIfStatTable	1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1		not-accessible	The table of the statistic information on each interface.
hpnicfIpxIfStatEntry	1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1		not-accessible	The entry of the statistic table.
I32 hpnicfIpxIfStatIndex	1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.1	Integer32	not-accessible	The index of the table's entry. According to the interface's index.
OCT hpnicfIpxIfStatNetId	1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.2	OCTET STRING	read-only	The network number of the IPX address of this interface.
OCT hpnicfIpxIfStatNodeId	1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.3	OCTET STRING	read-only	The node number of the IPX address of this interface.
C32 hpnicfIpxIfStatIpxReceives	1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.4	Counter32	read-only	The total number of packets received on the interface.
C32 hpnicfIpxIfStatIpxSends	1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.5	Counter32	read-only	The total number of packets sent on the interface.
C32 hpnicfIpxIfStatIpxRecvBytes	1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.6	Counter32	read-only	The total number of bytes received on the interface.
C32 hpnicfIpxIfStatIpxSendBytes	1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.7	Counter32	read-only	The total number of bytes sent on the interface.
C32 hpnicfIpxIfStatRipReceives	1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.8	Counter32	read-only	The total number of RIP packets received on the interface.
C32 hpnicfIpxIfStatRipSends	1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.9	Counter32	read-only	The total number of RIP packets sent on the interface.
C32 hpnicfIpxIfStatRipDiscards	1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.10	Counter32	read-only	The total number of RIP packets discarded on the interface.
C32 hpnicfIpxIfStatRipSpecReqReceives	1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.11	Counter32	read-only	The total number of RIP specific request packets received on the interface.
C32 hpnicfIpxIfStatRipSpecRspSends	1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.12	Counter32	read-only	The total number of RIP specific response packets sent on the interface.
C32 hpnicfIpxIfStatRipGenReqReceives	1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.13	Counter32	read-only	The total number of RIP general request packets received on the interface.
C32 hpnicfIpxIfStatRipGenRspSends	1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.14	Counter32	read-only	The total number of RIP general response packets sent on the interface.
C32 hpnicfIpxIfStatSapReceives	1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.15	Counter32	read-only	The total number of SAP packets received on the interface.
C32 hpnicfIpxIfStatSapSends	1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.16	Counter32	read-only	The total number of SAP packets sent on the interface.
C32 hpnicfIpxIfStatSapDiscards	1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.17	Counter32	read-only	The total number of SAP packets discarded on the interface.
C32 hpnicfIpxIfStatSapGnsReqReceives	1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.18	Counter32	read-only	The total number of SAP GNS response packets received on the interface.
C32 hpnicfIpxIfStatSapGnsRspSends	1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.19	Counter32	read-only	The total number of SAP GNS response packets sent on the interface.

RFC description

IPX (Internetwork Packet Exchange) protocol management for interface configuration, RIP, SAP, and statistics.

Start monitoring HP/H3C Comware routers and switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-IPX-MIB