HP-SN-IPX-MIB :: snIpxSapFilterRowStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHP-SN-IPX-MIBsnIpxSapFilterRowStatus

snIpxSapFilterRowStatus

Module: HP-SN-IPX-MIB

OID (symbolic): HP-SN-IPX-MIB::snIpxSapFilterRowStatus

OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row

If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid

What is snIpxSapFilterRowStatus?

Controls the lifecycle of one SAP filter table row, letting an admin create, modify, or delete a service-advertisement filtering rule; reading back valid(2) confirms the rule is currently active.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.5
snmpwalk -v2c -c public <target> HP-SN-IPX-MIB::snIpxSapFilterRowStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.5.1
snmpget -v2c -c public <target> HP-SN-IPX-MIB::snIpxSapFilterRowStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.5.1 i <value>

Start monitoring HP ServerNet (Foundry-derived) Layer 3 switch/router (legacy IPX routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-SN-IPX-MIB::snIpxSapFilterRowStatus OID value, configure state conditions and alerts, and monitor any HP ServerNet (Foundry-derived) Layer 3 switch/router (legacy IPX routing) from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.3hpsystemCLJ8500-MIB
1.3.6.1.4.1.11.2.3.7netElementHP-ICF
1.3.6.1.4.1.11.2.3.7.11hpEtherSwitchHP-ICF-OID
1.3.6.1.4.1.11.2.3.7.11.12hpSwitchCoreHP-SN-ROOT-MIB
1.3.6.1.4.1.11.2.3.7.11.12.2routerHP-SN-ROOT-MIB
1.3.6.1.4.1.11.2.3.7.11.12.2.1snIpxHP-SN-ROOT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.3.7.11.12.2.1.7snIpxSapFilterHP-SN-IPX-MIB
1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1snIpxSapFilterTableHP-SN-IPX-MIB
1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1snIpxSapFilterEntryHP-SN-IPX-MIB
1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.5snIpxSapFilterRowStatusHP-SN-IPX-MIB