All MIBs › HP-SN-IPX-MIB › snIpxRipFilterRowStatus
snIpxRipFilterRowStatus
Module: HP-SN-IPX-MIB
OID (symbolic): HP-SN-IPX-MIB::snIpxRipFilterRowStatus
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row
If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
What is snIpxRipFilterRowStatus?
Controls the lifecycle of one RIP filter table row, letting an admin create, modify, or delete a RIP route-filtering rule; reading back valid(2) confirms the rule is currently active.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.5 snmpwalk -v2c -c public <target> HP-SN-IPX-MIB::snIpxRipFilterRowStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.5.1 snmpget -v2c -c public <target> HP-SN-IPX-MIB::snIpxRipFilterRowStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.5.1 i <value>
Start monitoring HP ServerNet (Foundry-derived) Layer 3 switch/router (legacy IPX routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-SN-IPX-MIB::snIpxRipFilterRowStatus OID value, configure state conditions and alerts, and monitor any HP ServerNet (Foundry-derived) Layer 3 switch/router (legacy IPX routing) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-ICF |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.12 | hpSwitchCore | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2 | router | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1 | snIpx | HP-SN-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6 | snIpxRipFilter | HP-SN-IPX-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1 | snIpxRipFilterTable | HP-SN-IPX-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1 | snIpxRipFilterEntry | HP-SN-IPX-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.5 | snIpxRipFilterRowStatus | HP-SN-IPX-MIB |