All MIBs › HP-SN-IPX-MIB › snIpxRipFiltOnAllPort
snIpxRipFiltOnAllPort
Module: HP-SN-IPX-MIB
OID (symbolic): HP-SN-IPX-MIB::snIpxRipFiltOnAllPort
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Apply the IPX RIP Global filter list snIpxRipGblFiltList to all interfaces. This object is used to add all RIP filter lists and delete all RIP filter lists to/from all ports. Prior to sending this command, snIpxRipGblFiltList must be ready. The values that can be written are: deleteAllInBound(2)...delete all in-bound filter lists from all ports. deleteAllOutBound(3)..delete all out-bound filter lists from all ports. addAllInBound(4)......add all in-bound filter lists to all ports. addAllOutBound(5).....add all out-bound filter lists to all ports.
If set operation is failed, then a SET with value of (2)or(3) returns error 'GenError'. Deleted(2)&(3) go away immediately. The following values can be returned on reads: noSuch(0)...no such operation yet. valid(1)....set operation is done and is valid
What is snIpxRipFiltOnAllPort?
Applies or removes the global RIP filter list (snIpxRipGblFiltList) across every IPX interface in a single write, instead of the admin having to touch each port individually. Writing addAllInBound(4) or addAllOutBound(5) pushes the filter onto all ports in that direction, while deleteAllInBound(2)/deleteAllOutBound(3) strips it from all ports; reading back valid(1) confirms the last such bulk operation succeeded.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.12 snmpwalk -v2c -c public <target> HP-SN-IPX-MIB::snIpxRipFiltOnAllPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.12.1 snmpget -v2c -c public <target> HP-SN-IPX-MIB::snIpxRipFiltOnAllPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.12.1 i <value>
Start monitoring HP ServerNet (Foundry-derived) Layer 3 switch/router (legacy IPX routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-SN-IPX-MIB::snIpxRipFiltOnAllPort OID value, configure state conditions and alerts, and monitor any HP ServerNet (Foundry-derived) Layer 3 switch/router (legacy IPX routing) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-ICF |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.12 | hpSwitchCore | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2 | router | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1 | snIpx | HP-SN-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1 | snIpxGen | HP-SN-IPX-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.12 | snIpxRipFiltOnAllPort | HP-SN-IPX-MIB |