All MIBs › HP-SN-IPX-MIB › snIpxSapFiltOnAllPort
snIpxSapFiltOnAllPort
Module: HP-SN-IPX-MIB
OID (symbolic): HP-SN-IPX-MIB::snIpxSapFiltOnAllPort
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.14
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Apply the IPX SAP Global filter list snIpxSapGblFiltList to all interfaces. This object is used to add all RIP filter lists and delete all SAP filter lists to/from all ports. Prior to sending this command, snIpxSapGblFiltList must be ready. The values that can be written are: deleteAllInBound(2)...delete all in-bound filter lists from all ports. deleteAllOutBound(3)..delete all out-bound filter lists from all ports. addAllInBound(4)......add all in-bound filter lists to all ports. addAllOutBound(5).....add all out-bound filter lists to all ports.
If set operation is failed, then a SET with value of (2)or(3) returns error 'GenError'. Deleted(2)&(3) go away immediately. The following values can be returned on reads: noSuch(0)...no such operation yet. valid(1)....set operation is done and is valid
What is snIpxSapFiltOnAllPort?
Applies or removes the global SAP filter list (snIpxSapGblFiltList) across every IPX interface in one operation, using the same addAllInBound(4)/addAllOutBound(5)/deleteAllInBound(2)/deleteAllOutBound(3) value scheme as its RIP counterpart. This saves an admin from configuring SAP filtering on each port separately when a service-advertisement policy needs to apply device-wide.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.14 snmpwalk -v2c -c public <target> HP-SN-IPX-MIB::snIpxSapFiltOnAllPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.14.1 snmpget -v2c -c public <target> HP-SN-IPX-MIB::snIpxSapFiltOnAllPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.14.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> snIpxSapFiltOnAllPort.1
Start monitoring HP ServerNet (Foundry-derived) Layer 3 switch/router (legacy IPX routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-SN-IPX-MIB::snIpxSapFiltOnAllPort OID value, configure state conditions and alerts, and monitor any HP ServerNet (Foundry-derived) Layer 3 switch/router (legacy IPX routing) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-ICF |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.12 | hpSwitchCore | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2 | router | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1 | snIpx | HP-SN-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1 | snIpxGen | HP-SN-IPX-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.14 | snIpxSapFiltOnAllPort | HP-SN-IPX-MIB |