All MIBs › HP-SN-IPX-MIB › snIpxFwdFilterRowStatus
snIpxFwdFilterRowStatus
Module: HP-SN-IPX-MIB
OID (symbolic): HP-SN-IPX-MIB::snIpxFwdFilterRowStatus
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row
If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
What is snIpxFwdFilterRowStatus?
Controls the lifecycle of one IPX forward-filter table row. An admin writes create(4) to add a new filter rule, modify(5) to change an existing one, or delete(3) to remove it; reading back valid(2) confirms the rule is currently active and being enforced.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.8 snmpwalk -v2c -c public <target> HP-SN-IPX-MIB::snIpxFwdFilterRowStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.8.1 snmpget -v2c -c public <target> HP-SN-IPX-MIB::snIpxFwdFilterRowStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.8.1 i <value>
Start monitoring HP ServerNet (Foundry-derived) Layer 3 switch/router (legacy IPX routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-SN-IPX-MIB::snIpxFwdFilterRowStatus OID value, configure state conditions and alerts, and monitor any HP ServerNet (Foundry-derived) Layer 3 switch/router (legacy IPX routing) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-ICF |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.12 | hpSwitchCore | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2 | router | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1 | snIpx | HP-SN-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5 | snIpxFwdFilter | HP-SN-IPX-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1 | snIpxFwdFilterTable | HP-SN-IPX-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1 | snIpxFwdFilterEntry | HP-SN-IPX-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.8 | snIpxFwdFilterRowStatus | HP-SN-IPX-MIB |