| OID symbolic | OID numeric | Type | Access | Description |
|---|
| gdc | 1.3.6.1.4.1.498 | | | |
| sc | 1.3.6.1.4.1.498.3 | | | |
| scmSystem | 1.3.6.1.4.1.498.3.6 | | | |
| NTF scmAlarmTrap | 1.3.6.1.4.1.498.3.6.0.1 | | | This is the Alarm Trap. This trap is sent whenever a network element detects a change in its alarm information. |
| NTF scmExpressPollTrap | 1.3.6.1.4.1.498.3.6.0.2 | | | This is the Express Poll Trap. It will be used to indicate a state change in a slot in the shelf. |
| NTF scmPowerSupplyTrap | 1.3.6.1.4.1.498.3.6.0.3 | | | This is the Power Supply Trap. It will be used to indicate a change in the amount of power available to the shelf. This change will occur when a power supply card has either failed or has been physically replaced. |
| NTF scmAliveTrap | 1.3.6.1.4.1.498.3.6.0.4 | | | This is the SCM Alive Trap. It is used to notify the manager every N minutes that it is still alive. |
| NTF scmConfigChksumTrap | 1.3.6.1.4.1.498.3.6.0.5 | | | This is the configuration checksum change trap. When the configuration checksum of a network element changes then the SCM sends this trap to notify the manager of the change. |
| NTF scmAlarmTextTrap | 1.3.6.1.4.1.498.3.6.0.6 | | | This trap is sent when an alarm is received from a network element and scmTextAlarmTraps is set to enable and the network element supports text-style traps. The variable is scmAlarmText which is a display string of the form: NNN: Slot x Line y Drop z alarm name is Active (or Inactive), where NNN is the network element name which corresponds to scmNodeType. Example: SC553: Slot 2 Line 1 Drop 0 DCD Loss Alarm is Active |
| scmVersion | 1.3.6.1.4.1.498.3.6.1 | | | |
| STR scmMIBVersion | 1.3.6.1.4.1.498.3.6.1.1 | DisplayString | read-only | The version number of the MIB, to allow products to
know which MIB is being supported. The version number
will be x.yzT where x is a major revision (1-9), y is a minor
revision(0-9), z is a typo revision (0-9) and T indicates the
MIB is still a test revision(A-Z). When a release is complete
no T should exist. |
| STR scmBootVersion | 1.3.6.1.4.1.498.3.6.1.2 | DisplayString | read-only | The version number of the Boot Software, to allow products to
know which Boot Software is being supported. The version number
will be x.yzT where x is a major revision (1-9), y is a minor
revision(0-9), z is a typo revision (0-9) and T indicates the
Boot Software is still a test revision(A-Z). When a release
is complete no T should exist. |
| STR scmApplVersion | 1.3.6.1.4.1.498.3.6.1.3 | DisplayString | read-only | The version number of the Application Software, to allow
products to know which Software is being supported. The
version number will be x.yzT where x is a major revision (1-9),
y is a minor revision(0-9), z is a typo revision (0-9) and T
indicates the Software is still a test revision(A-Z).
When a release is complete no T should exist. |
| scmMaster | 1.3.6.1.4.1.498.3.6.2 | | | |
| INT scmMasterTimeout | 1.3.6.1.4.1.498.3.6.2.1 | INTEGER | read-write | The Management bus timeout defined as the time
between the last character being transmitted
to the Network Element and the first character
being received. This variable is defined in
milliSeconds.
The default timeout is 50.0 mS. |
| INT scmAlarmScan | 1.3.6.1.4.1.498.3.6.2.2 | INTEGER | read-write | This is used to turn on and off the alarm scan feature
to the Network Elements connected off of this SCM. If the alarm
scan is turned off no Network Elements will be scanned for
alarms and therefore no alarms will be sent to the controller.
If alarms occur when the scan is off, they will be discarded. |
| STR scmTime | 1.3.6.1.4.1.498.3.6.2.3 | DisplayString | read-write | This is used to read or set the time of the real-time
clock in the SCM. The format of the time will be
hh:mm:ss. Where hh is the hour (01-24) in 24 hour
format, mm is minutes (00-59) and ss is seconds (00-59) |
| STR scmDate | 1.3.6.1.4.1.498.3.6.2.4 | DisplayString | read-write | This is used to read or set the date of the real-time
clock in the SCM. The format of the date will be
mm-dd-yy. Where mm is month (01-12), dd is the day (01-31),
and yy is the year (00-99). |
| INT scmRedundant | 1.3.6.1.4.1.498.3.6.2.5 | INTEGER | read-only | This is used to read the current state of a SCM |
| INT scmShelfNumber | 1.3.6.1.4.1.498.3.6.2.6 | INTEGER | read-only | This indicates the number of shelves in the system. If it
is a one shelf system, then a maximum of 16 Network Elements
(including any SCM's). If it is a two shelf system, then a
maximum of 32 Network Elements (including any SCM's) can exist. |
| INT scmReset | 1.3.6.1.4.1.498.3.6.2.7 | INTEGER | read-write | This is used to reset the SCM card in the shelf. The SCM will
respond to the command and then perform the reset. During the
time the SCM resets, the SCM will not respond. The SCM reset
is a hard reset, therefore a coldStart TRAP will be received.
normal - This is the value that will be returned whenever this
variable is read.
reset - This value can be set to perform the reset. |
| GAU scmPowerAvail | 1.3.6.1.4.1.498.3.6.2.8 | Gauge | read-only | This is used to determine the total amount of power available to the
shelves. |
| INT scmDefaultConfig | 1.3.6.1.4.1.498.3.6.2.9 | INTEGER | read-write | This is used to allow the NonVolatile Configuration to
be set to a factory default state. The SCM will perform
a reset to make the default configuration take affect.
The SCM reset is a hard reset, therefore a coldStart TRAP
will be received.
factoryApplDefault - This is used to clear all of Non-Volatile
memory associated with the application. If this option is
selected the Node table will be emptied and the Community
Name Table will only contain 'public' as readOnly and the Trap
Table will be empty. |
| GAU scmPowerConsum | 1.3.6.1.4.1.498.3.6.2.10 | Gauge | read-only | This is used to determine the amount of power consumed by all the
managed network elements in the shelves managed by this SCM. |
| INT scmCannedConfig | 1.3.6.1.4.1.498.3.6.2.11 | INTEGER | read-only | This reads the dip switches and reports the current
canned configuration setting. |
| INT scmSetNetworkElementRealTime | 1.3.6.1.4.1.498.3.6.2.12 | INTEGER | read-write | Number of seconds from midnight Dec 31, 1969.
A set of this object will be broadcasted to every
network element in the shelf.
A get of this object will always return a 1. |
| INT scmDownLoadCode | 1.3.6.1.4.1.498.3.6.2.13 | INTEGER | read-write | This object determines if TFTP (Trivial File Transfer Protocol)
code downloading to the SCM or any NEs is permitted.
When management sets disable(2) any attempt to place the SCM
in boot mode or download code to NEs will result in an TFTP
error response indicating that the download request has been denied.
The factory default is enable(1). |
| INT scmOperatingMode | 1.3.6.1.4.1.498.3.6.2.14 | INTEGER | read-write | This object determines the operating mode of an SCM as it pertains to the management
buss.
Active - indicates the SCM is to possess full control of the shelf and its
elements. This is the default for a primary SCM.
Standby - indicates the SCM is operationg in redundant mode. This state applies
only to an SCM whose dip switch is set to redundant.
Sleep - indicates the primary SCM has been forced off the management buss.
This value can never be set by network management and only pertains to an
SCM whose dip switch is set to primary. |
| INT scmAliveTrapInterval | 1.3.6.1.4.1.498.3.6.2.15 | INTEGER | read-write | This object is used to set the time period, represented in minutes, in which the
SCM will send an SNMP TRAP to the manager to indicate that it is alive. No trap is sent
if the value is zero or if the scmOperatingMode is set to Sleep. The default value
is zero for this object. |
| INT scmRedundantTimeOut | 1.3.6.1.4.1.498.3.6.2.16 | INTEGER | read-write | This object is used to set the time period, represented in seconds, in which the
redundant SCM will wait after not receiving express polls from the primary SCM before
it takes contol of the management buss. When set to zero, the redundant SCM will
ignore the loss of express polls. The default is zero. |
| INT scmTelnet | 1.3.6.1.4.1.498.3.6.2.17 | INTEGER | read-write | This object determines if telnet to the SCM is permitted.
When management sets disable(2) all attempts to telnet to the
SCM will be rejected.
The factory default is enable(1). |
| INT scmTextAlarmTraps | 1.3.6.1.4.1.498.3.6.2.18 | INTEGER | read-write | This object changes the format of alarm traps from the
managed network elements. If this object is set to
disable then the SCM sends cmnAlarmStatusTrap traps. If
this is set to enable and the network element supports
text-style traps then the SCM sends scmAlarmTextTrap traps.
The factory default is disable(1). |
| scmNode | 1.3.6.1.4.1.498.3.6.3 | | | |
| scmNodeTable | 1.3.6.1.4.1.498.3.6.3.2 | | not-accessible | A table that contains information about the nodes in
the system.
The SCM node is a special node in the table. The SCM
itself adds the node to the table and it cannot be
deleted by setting the status to invalid. The configuration
checksum of the SCM is this node table (minus the SCM's
configuration checksum), the community name table, the
trap table and any ip addresses that are inputed through
the terminal interface. |
| scmNodeEntry | 1.3.6.1.4.1.498.3.6.3.2.1 | | not-accessible | A list of information for each node in the system. To create
an entry, must give the type field. |
| SCI scmNodeIndex | 1.3.6.1.4.1.498.3.6.3.2.1.1 | SCinstance | read-only | The value indicates the node number for which this
entry contains management information. The Node Index
is based off of the IFindex in MIB-II. The Node Index
value is used to indicate the slot, line and drop of
the node that is being addressed.
The index is defined as: ssllddxx
where ss is from 1-32, ll from 1-128 and dd from 0-31. The
xx is always zero in the Node table, but can be used by a
network element type in their MIB. |
| INT scmNodeType | 1.3.6.1.4.1.498.3.6.3.2.1.2 | INTEGER | read-write | The value indicates the type of node located at the Node
index. |
| OCT scmNodeConfigCs | 1.3.6.1.4.1.498.3.6.3.2.1.3 | OCTET STRING | read-only | The value indicates the configuration checksum of the node. It
is not a required value when adding an entry to a table. A
default value of 0(zero) will be used when the checksum is
unknown. |
| INT scmNodeStatus | 1.3.6.1.4.1.498.3.6.3.2.1.4 | INTEGER | read-write | The status of the entry. If read and the entry
exists, valid(1) will always be returned.
Invalid entries will be removed from the table. |
| INT scmNodeAlarmScan | 1.3.6.1.4.1.498.3.6.3.2.1.5 | INTEGER | read-write | This is used to turn on and off the alarm scan feature
for a particular Network Element connected off of this SCM. If the alarm
scan is turned off the Network Element will not be scanned for
alarms and therefore no alarms will be sent to the controller for that NE.
If alarms occur when the scan is off, they will be discarded. |
| INT scmNodeLevel | 1.3.6.1.4.1.498.3.6.3.2.1.6 | INTEGER | read-write | The value indicates the level that the node exists at. Nodes
that are located in the shelf are usually defined as level 1.
The level is used to determine the time the SCM allows for the
node to respond. The higher the level the longer the timeout.
The timeout is defined as follows:
2 * (level - 1) + 2 Second |
| INT scmNodeConfigChecksumStatus | 1.3.6.1.4.1.498.3.6.3.2.1.7 | INTEGER | read-only | The value indicates whether the checksum in the NE matches that
in the table the last time the information was received from
a NE. The NE will send this information on power-up. |
| OCT scmNodeCurrentAlarms | 1.3.6.1.4.1.498.3.6.3.2.1.8 | OCTET STRING | read-only | Reads the alarm information current in the network element.
The number of bytes in the alarm data is dependent on the
type of network element that is being addressed. |
| STR scmNodeSerialNumber | 1.3.6.1.4.1.498.3.6.3.2.1.9 | DisplayString | read-write | This is used to get the serial number of the network
element. This is also used to set the address of the unit
by it's serial number in the case of remote units. |
| INT scmNodeAdminStatus | 1.3.6.1.4.1.498.3.6.3.2.1.10 | INTEGER | read-write | This is used to set the desired state of the network element. |
| INT scmNodeOperStatus | 1.3.6.1.4.1.498.3.6.3.2.1.11 | INTEGER | read-only | The current operational statue of the network element. |
| scmShelf | 1.3.6.1.4.1.498.3.6.4 | | | |
| scmSlotTable | 1.3.6.1.4.1.498.3.6.4.1 | | not-accessible | A table that contains information about the state of
the Network Elements in the shelf. |
| scmSlotEntry | 1.3.6.1.4.1.498.3.6.4.1.1 | | not-accessible | A list of information for each Network Element in the
shelf. |
| INT scmSlotNumber | 1.3.6.1.4.1.498.3.6.4.1.1.1 | INTEGER | read-only | The value indicates the slot from which to read the current
state. |
| INT scmSlotState | 1.3.6.1.4.1.498.3.6.4.1.1.2 | INTEGER | read-only | The state of the Network Element in the shelf. Active means
that all commands to and from the Network Element have had
correct responses with no communication errors. Inactive
means that the Network Element does not respond to any commands.
Active with Errors means that responses are received, but
communication errors are occuring. |
| scmAlmTrap | 1.3.6.1.4.1.498.3.6.5 | | | |
| scmRedundancy | 1.3.6.1.4.1.498.3.6.6 | | | |
| scmRedundancyTable | 1.3.6.1.4.1.498.3.6.6.2 | | not-accessible | A table that contains information about the SCM's in the system as they pertain
to redundancy. |
| scmRedundancyEntry | 1.3.6.1.4.1.498.3.6.6.2.1 | | not-accessible | A list of information for each SCM in the shelf as it pertains to redundancy. |
| SCI scmRedundancyIndex | 1.3.6.1.4.1.498.3.6.6.2.1.1 | SCinstance | read-only | The value indicates the addressing/indexing method of accessing the objects in
this table. The SCinstance represents the shelf's Slot, Line, Drop and
interface address. Drop and interface will always be zero for an SCM. |
| IP scmEtherIPAddress | 1.3.6.1.4.1.498.3.6.6.2.1.2 | IpAddress | read-only | This object is used to obtain the Ethernet IP Address of the SCM in ###.###.###.###
format. |
| IP scmPPPIPAddress | 1.3.6.1.4.1.498.3.6.6.2.1.3 | IpAddress | read-only | This object is used to obtain the PPP IP Address of the SCM in ###.###.###.###
format. |
| INT scmRedundancySwitch | 1.3.6.1.4.1.498.3.6.6.2.1.4 | INTEGER | read-only | This is used to read the current state of the redundant switch on a SCM. |
| STR scmAlarmText | 1.3.6.1.4.1.498.3.6.7 | DisplayString | read-only | The variable associated with scmAlarmTextTrap. A get
will always return a null string. |
