GDCSCM-MIB :: scmDefaultConfig

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › GDCSCM-MIB › scmDefaultConfig

scmDefaultConfig

Module: GDCSCM-MIB

OID (symbolic): GDCSCM-MIB::scmDefaultConfig

OID (numeric): 1.3.6.1.4.1.498.3.6.2.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This is used to allow the NonVolatile Configuration to be set to a factory default state. The SCM will perform a reset to make the default configuration take affect. The SCM reset is a hard reset, therefore a coldStart TRAP will be received.

factoryApplDefault - This is used to clear all of Non-Volatile memory associated with the application. If this option is selected the Node table will be emptied and the Community Name Table will only contain 'public' as readOnly and the Trap Table will be empty.

What is scmDefaultConfig?

Setting this to factoryApplDefault(2) wipes the SCM's non-volatile application configuration -- clearing the node table and resetting the community table to just 'public' read-only -- then forces a hard reset, so it should only be used when deliberately re-provisioning a card.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.3.6.2.9
snmpwalk -v2c -c public <target> GDCSCM-MIB::scmDefaultConfig

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.498.3.6.2.9.1
snmpget -v2c -c public <target> GDCSCM-MIB::scmDefaultConfig.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.498.3.6.2.9.1 i <value>

Start monitoring General DataComm (GDC) SCM (Shelf Control Module)-managed multiplexing/access shelf with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GDCSCM-MIB::scmDefaultConfig OID value, configure state conditions and alerts, and monitor any General DataComm (GDC) SCM (Shelf Control Module)-managed multiplexing/access shelf from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.498gdcDMA200-MIB
1.3.6.1.4.1.498.3scDMA200-MIB
Numeric OIDNameModule
1.3.6.1.4.1.498.3.6scmSystemGDCSCM-MIB
1.3.6.1.4.1.498.3.6.2scmMasterGDCSCM-MIB
1.3.6.1.4.1.498.3.6.2.9scmDefaultConfigGDCSCM-MIB