All MIBs › GDCUAS7022-MIB
Category: Vendor: GDC
Description: General DataComm UAS7022 unit MIB for universal access system port and service configuration management.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is GDCUAS7022-MIB?
GDCUAS7022-MIB is a vendor-specific MIB from General DataComm for the UAS7022 universal access system, a telecom access device managing multiple line/port services with firmware-controlled operation. It exposes firmware version/status information, a version table, and a maintenance table with per-line alarm conditions. This is directly a hardware/software status MIB: uas7022ActiveFirmwareRev and uas7022StoredFirmwareRev/uas7022StoredFirmwareStatus report the running and staged software versions (useful for confirming successful firmware upgrades), while uas7022NoResponseAlm, uas7022DiagRxErrAlm, and uas7022PowerUpAlm surface specific hardware/line fault alarms per maintenance line. There is no explicit dependency on other MIBs stated. It's typically deployed in telecom central offices or access sites where UAS7022 units provide multiplexed access services monitored by an NMS. Network engineers evaluating or troubleshooting this functionality can download the GDCUAS7022-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in GDCUAS7022-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- General DataComm UAS7022 universal access system
Monitoring Examples
An admin would poll uas7022VersionTable/uas7022VersionEntry to check uas7022ActiveFirmwareRev against uas7022StoredFirmwareRev and uas7022StoredFirmwareStatus, confirming whether a firmware update has been successfully staged and activated, or use uas7022SwitchActiveFirmware to fail back if an upgrade caused issues. Polling uas7022MaintenanceTable/uas7022MaintenanceEntry by uas7022MaintenanceLineIndex and watching uas7022NoResponseAlm or uas7022DiagRxErrAlm would reveal a specific line experiencing no response or receive errors, indicating a hardware or cabling fault. A set uas7022PowerUpAlm flag would indicate the unit recently power-cycled, useful for correlating with an outage.
What Can Be Monitored
- active vs stored firmware revision
- firmware download/switch status
- per-line no-response alarm
- per-line diagnostic receive error alarm
- power-up alarm
This MIB depends on
Related MIBs
Imported Objects
From GDCMACRO-MIB
| SCinstance |
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| enterprises |
From RFC1213-MIB
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| gdc | 1.3.6.1.4.1.498 | |||
| dsx1 | 1.3.6.1.4.1.498.6 | |||
| uas7022 | 1.3.6.1.4.1.498.6.13 | |||
| uas7022Version | 1.3.6.1.4.1.498.6.13.1 | |||
| STR uas7022MIBversion | 1.3.6.1.4.1.498.6.13.1.1 | DisplayString | read-only | Identifies the version of the MIB. The format of the version is x.yzT, where 'x' identifies the major revision number, 'y' identifies the minor revision number, 'z' identifies the typographical revision, and T identifies the test revision. Acceptable values for the individual revision components are as follows: x: 1 - 9 y: 0 - 9 z: 0 - 9 T: A - Z Upon formal release, no designation for the test revision will be present. |
| uas7022VersionTable | 1.3.6.1.4.1.498.6.13.1.2 | not-accessible | The 7022 version table | |
| uas7022VersionEntry | 1.3.6.1.4.1.498.6.13.1.2.1 | not-accessible | An entry in the GDC uas7022 Version Table. | |
| SCI uas7022VersionIndex | 1.3.6.1.4.1.498.6.13.1.2.1.1 | SCinstance | read-only | Integer value which uniquely identifies the UAS7022 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf slot location (01-32) L (byte value) - line number (01) D (byte value) - drop number (00) i (byte value) - interface number (00) |
| STR uas7022ActiveFirmwareRev | 1.3.6.1.4.1.498.6.13.1.2.1.2 | DisplayString | read-only | The version number of the firmware currently executing. The format is MM.NN.BB where: MM: Major Revision (0-99) NN: Minor Revision (0-99) BB: Bug Fix Revision (0-99) Valid [i]nterface = 0 |
| STR uas7022StoredFirmwareRev | 1.3.6.1.4.1.498.6.13.1.2.1.3 | DisplayString | read-only | The version number of the firmware stored (in a compressed format) but not currently executing. MM: Major Revision (0-99) NN: Minor Revision (0-99) BB: Bug Fix Revision (0-99) Valid [i]nterface = 0 |
| INT uas7022StoredFirmwareStatus | 1.3.6.1.4.1.498.6.13.1.2.1.4 | INTEGER | read-only | This object represents the state of the Non-Active or Stored firmware: statBlank(1) Factory Default statDownLoading(2) In process of downloading firmware statOK(3) Zipped version checksum succesful (OK to switch) (can set uas7022SwitchActiveFirmware to switchActive(2)) statCheckSumBad(4) Failed checksum after download statUnZipping(5) In process of uncompressing into active area statBadUnZip(6) Failed last uncompress statDownloadAborted(7) Download aborted by user Valid [i]nterface = 0 |
| INT uas7022SwitchActiveFirmware | 1.3.6.1.4.1.498.6.13.1.2.1.5 | INTEGER | read-write | This object is used to switch the active executing firmware from the version in uas7022ActiveFirmwareRev to the version in uas7022StoredFirmwareRev. When a switchActive(2) is set (write only) the element will: 1) reboot 2) uncompress stored code into active area 3) perform checksum on active area 4) Set uas7022StoredStatus object to indicate results 5) If succesfull: update uas7022ActiveFirmwareRev and uas7022StoredFirmwareRev and begin executing If failed: replace active area with previous revision The switchNorm(1) enumeration will always be read. Setting switchActive(2) when the uas7022StoredFirmwareStatus is not statOK(3) will result in an error. Valid [i]nterface = 0 |
| INT uas7022DownloadingMode | 1.3.6.1.4.1.498.6.13.1.2.1.6 | INTEGER | read-write | This object is used to configure the download mode: disableAll(1) Prevents any firmware downloading to UAS7022 enableAndWait(2) Allows downloading zipped code to be stored only! enableAndSwitch(3) Allows downloading and then unzips and begins executing the new code Valid [i]nterface = 0 |
| uas7022Maintenance | 1.3.6.1.4.1.498.6.13.2 | |||
| uas7022MaintenanceTable | 1.3.6.1.4.1.498.6.13.2.1 | not-accessible | The uas7022 maintenance table. | |
| uas7022MaintenanceEntry | 1.3.6.1.4.1.498.6.13.2.1.1 | not-accessible | An entry in the 7022 Maintenance Table. | |
| SCI uas7022MaintenanceLineIndex | 1.3.6.1.4.1.498.6.13.2.1.1.1 | SCinstance | read-only | Integer value which uniquely identifies the UAS7022 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf slot location (01-32) L (byte value) - line number (01) D (byte value) - drop number (00) i (byte value) - interface number (00-02) |
| INT uas7022SoftReset | 1.3.6.1.4.1.498.6.13.2.1.1.2 | INTEGER | read-write | Supports the action of soft resetting the unit. When this object is set to reset(2), then the unit performs a soft reset, whose meaning is specific to the type of unit being managed. The value of norm(1) will be returned when the reset is complete. The value of norm(1) can not be set by management. Valid [i]nterface = 0 |
| INT uas7022SysUpTime | 1.3.6.1.4.1.498.6.13.2.1.1.3 | INTEGER | read-only | This variable is used to report the elapsed system tick time for conversion to real time at the controller and is not related to the sysUpTime referenced in MIB-II. Upon power-up of the unit, the elapsed time is cleared. The elapsed time counter rolls over upon reaching the maximum count. Valid [i]nterface = 0 |
| INT uas7022DefaultInit | 1.3.6.1.4.1.498.6.13.2.1.1.4 | INTEGER | read-write | This is used to allow the NonVolatile Configuration to be set to a factory default state. When this value is set to factoryDefault(1) the unit will perform a reset to make the default configuration take affect. The value of normal(2) will be returned when the initialization is complete. The value of normal(2) can not be set by management. Valid [i]nterface = 0 |
| OCT uas7022LedStatus | 1.3.6.1.4.1.498.6.13.2.1.1.5 | OCTET STRING | read-only | Returns a bitwise snapshot of the front panel LED state. Octet 1 bit 7 - not used bit 6 - future use bit 5 - INSV bit 4 - RSP bit 3 - TMG bit 2 - TM bit 1 - ALM bit 0 - future use Octet 2 bit 7 - not used bit 6 - future use bit 5 - NIUA AIS bit 4 - NIUA LCV bit 3 - NIUA LOS bit 2 - NIUA OOF bit 1 - future use bit 0 - future use Octet 3 bit 7 - not used bit 6 - ST- future use bit 5 - NIUB AIS bit 4 - NIUB LCV bit 3 - NIUB LOS bit 2 - NIUB OOF bit 1 - future use bit 0 - future use Valid [i]nterface = 0 |
| OCT uas7022AlarmStatus | 1.3.6.1.4.1.498.6.13.2.1.1.6 | OCTET STRING | read-only | Returns a bit-wise Status of alarms Octet 1 bit 7 - not used bit 6 - NIUA_LOS bit 5 - NIUA_LOF bit 4 - NIUA_AIS bit 3 - NIUA_LCV bit 2 - NIUA TIMING LOSS bit 1 - NIUA_NE_ES bit 0 - NIUA_NE_BBE Octet 2 bit 7 - not used bit 6 - NIUA_NE_SES bit 5 - NIUA_NE_UAS bit 4 - NIUA_FE_ES bit 3 - NIUA_FE_BBE bit 2 - NIUA_FE_SES bit 1 - NIUA_FE_UAS bit 0 - NIUA_RAI Octet 3 bit 7 - not used bit 6 - NIUB_LOS bit 5 - NIUB_LOF bit 4 - NIUB_AIS bit 3 - NIUB_LCV bit 2 - NIUB TIMING LOSS bit 1 - NIUB_NE_ES bit 0 - NIUB_NE_BBE Octet 4 bit 7 - not used bit 6 - NIUB_NE_SES bit 5 - NIUB_NE_UAS bit 4 - NIUB_FE_ES bit 3 - NIUB_FE_BBE bit 2 - NIUB_FE_SES bit 1 - NIUB_FE_UAS bit 0 - NIUB_RAI Octet 5 bit 7 - not used bit 6 - future use bit 5 - future use bit 4 - future use bit 3 - future use bit 2 - future use bit 1 - future use bit 0 - Power-up Alarm Valid [i]nterface = 0 |
| INT uas7022NearEndResetStats | 1.3.6.1.4.1.498.6.13.2.1.1.7 | INTEGER | read-write | Supports the action of soft resetting the uas7022NearEndValidIntervals object. When this object is set to reset(2), then the unit will reset the uas7022NearEndValidIntervals object to zero. The value of norm(1) can not be set by management. Valid [i]nterface = 1-2 |
| INT uas7022FarEndResetStats | 1.3.6.1.4.1.498.6.13.2.1.1.8 | INTEGER | read-write | Supports the action of soft resetting the uas7022FarEndValidIntervals object. When this object is set to reset(2), then the unit will reset the uas7022FarEndValidIntervals object to zero. The value of norm(1) can not be set by management. Valid [i]nterface = 1-2 |
| INT uas7022NearEndStatLastInit | 1.3.6.1.4.1.498.6.13.2.1.1.9 | INTEGER | read-only | Number of seconds from midnight Dec 31, 1969 up until uas7022NearEndValidIntervals was last initialized to zero Valid [i]nterface = 1-2 |
| INT uas7022FarEndStatLastInit | 1.3.6.1.4.1.498.6.13.2.1.1.10 | INTEGER | read-only | Number of seconds from midnight Dec 31, 1969 up until uas7022FarEndValidIntervals was last initialized to zero Valid [i]nterface = 1-2 |
| INT uas7022NearEndValidIntervals | 1.3.6.1.4.1.498.6.13.2.1.1.11 | INTEGER | read-only | The number of previous intervals for which valid data was collected. The value will be 16 unless the interface was brought on-line within the last 4 hours, in which case the value will be the number of complete 15 minute intervals the since interface has been online. Valid [i]nterface = 1-2 |
| INT uas7022FarEndValidIntervals | 1.3.6.1.4.1.498.6.13.2.1.1.12 | INTEGER | read-only | The number of previous intervals for which valid data was collected. The value will be 16 unless the interface was brought on-line within the last 4 hours, in which case the value will be the number of complete 15 minute intervals the since interface has been online. Valid [i]nterface = 1-2 |
| STR uas7022NIUaCircuitID | 1.3.6.1.4.1.498.6.13.2.1.1.13 | DisplayString | read-write | This variable is used for general purpose storage. Valid [i]nterface = 1 |
| INT uas7022SystemTimingGenStatus | 1.3.6.1.4.1.498.6.13.2.1.1.14 | INTEGER | read-only | Indicates if the units configured for primary or secondary system clock are actually supplying clock and if it is the 8hkz, 4mhz, or both. Valid [i]nterface = 1-2 |
| STR uas7022NIUbCircuitID | 1.3.6.1.4.1.498.6.13.2.1.1.15 | DisplayString | read-write | This variable is used for general purpose storage. Valid [i]nterface = 2 |
| uas7022Configuration | 1.3.6.1.4.1.498.6.13.3 | |||
| uas7022ConfigTable | 1.3.6.1.4.1.498.6.13.3.1 | not-accessible | The Configuration table. | |
| uas7022ConfigEntry | 1.3.6.1.4.1.498.6.13.3.1.1 | not-accessible | The Configuration table entry. | |
| SCI uas7022ConfigIndex | 1.3.6.1.4.1.498.6.13.3.1.1.1 | SCinstance | read-only | Integer value which uniquely identifies the UAS7022 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf slot location (01-32) L (byte value) - line number (01) D (byte value) - drop number (00) i (byte value) - interface number (01-02) |
| INT uas7022RcvrRange | 1.3.6.1.4.1.498.6.13.3.1.1.2 | INTEGER | read-write | Sets the receiver range to short (6dB) or long (36dB) Valid [i]nterface = 1-2 |
| INT uas7022Framing | 1.3.6.1.4.1.498.6.13.3.1.1.3 | INTEGER | read-write | Set the framing for the interface. Abbreviations are as follows: CCS - common-channel signaling CAS - channel-associated signaling Default is CAS If uas7022Framing is CAS then TimeSlot 16 contains idle code. If uas7022Framing is CCS then TimeSlot 16 contains either marks or user data. See uas7022TimeSlot16Content. Valid [i]nterface = 1-2 |
| INT uas7022SysTimingGen | 1.3.6.1.4.1.498.6.13.3.1.1.4 | INTEGER | read-write | Selects if the unit provides system timing. none(1) - does not provide Timing Generator primary(2) - unit is primary Timing Generator for the shelf. secondary(3) - unit is secondary Timing Generator for the shelf. Only 1 unit in the shelf can the primary or secondary timing generator. All other must be none. Valid [i]nterface = 1-2 |
| INT uas7022Highway | 1.3.6.1.4.1.498.6.13.3.1.1.5 | INTEGER | read-write | Defines the highway allocation. No two NIU interfaces in the shelf can be assigned to the same highway. Valid [i]nterface = 1-2 |
| INT uas7022TransmitClockSource | 1.3.6.1.4.1.498.6.13.3.1.1.6 | INTEGER | read-write | Sets the transmit clock source. Valid [i]nterface = 1-2 |
| INT uas7022FallbackClockSource | 1.3.6.1.4.1.498.6.13.3.1.1.7 | INTEGER | read-write | Identifies the fallback transmit clock source. Valid [i]nterface = 1-2 |
| INT uas7022InterfaceType | 1.3.6.1.4.1.498.6.13.3.1.1.8 | INTEGER | read-write | Sets the interface type. Valid [i]nterface = 1-2 |
| INT uas7022FDLMode | 1.3.6.1.4.1.498.6.13.3.1.1.9 | INTEGER | read-write | Sets the interface type. Valid [i]nterface = 1-2 |
| INT uas7022TimeSlot16Content | 1.3.6.1.4.1.498.6.13.3.1.1.10 | INTEGER | read-write | Selects the content for TimeSlot 16. Valid [i]nterface = 1-2 |
| INT uas7022Impedance | 1.3.6.1.4.1.498.6.13.3.1.1.11 | INTEGER | read-write | Selects the impedance. Valid [i]nterface = 1-2 |
| uas7022Diagnostics | 1.3.6.1.4.1.498.6.13.4 | |||
| uas7022DiagTable | 1.3.6.1.4.1.498.6.13.4.1 | not-accessible | The Diagnostics table. Information in the entries of this table support diagnostics testing via loopbacks. | |
| uas7022DiagEntry | 1.3.6.1.4.1.498.6.13.4.1.1 | not-accessible | The Diagnostics table entry. | |
| SCI uas7022DiagIndex | 1.3.6.1.4.1.498.6.13.4.1.1.1 | SCinstance | read-only | Integer value which uniquely identifies the UAS7022 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf slot location (01-32) L (byte value) - line number (01) D (byte value) - drop number (00) i (byte value) - interface number (01-02) |
| INT uas7022DiagConfig | 1.3.6.1.4.1.498.6.13.4.1.1.2 | INTEGER | read-write | Selects the test to run. noLoop(1) ends the test. Valid [i]nterface = 1-2 |
| INT uas7022TestLimit | 1.3.6.1.4.1.498.6.13.4.1.1.3 | INTEGER | read-write | Selects the duration to run a diagnostic test. The value noLimit(3) signifies that the test should run indefinitely until explicitly terminated. Default value: testTime10Mins(1) Valid [i]nterface = 1-2 |
| INT uas7022TestExecutionStatus | 1.3.6.1.4.1.498.6.13.4.1.1.4 | INTEGER | read-only | This variable reports the status of a test. notInTest(1) indicates a test is not running. testInProgress(2) indicates that a test is currently running. testCompleted(4) indicates that a test has run and is completed. testCompletedNotInTest(5) indicates that a test has completed and it is no longer in test. Valid [i]nterface = 1-2 |
| INT uas7022TestExceptions | 1.3.6.1.4.1.498.6.13.4.1.1.5 | INTEGER | read-only | Indicates exceptions that have occurred that may affect interpretation of the test results. The value of this object is a sum. This sum initially take the value zero. Then, for each exception, the value associated with the exception is added to the sum. The exception values are: value exception 1 a timed test was preempted so the result cannot be viewed in relation to the test duration 2 the results overflowed so the result cannot be viewed as an absolute value 4 the test was performed while synchronization could not be performed so the result may not be accurate. Valid [i]nterface = 1-2 |
| uas7022Performance | 1.3.6.1.4.1.498.6.13.5 | |||
| uas7022NearEndCurrent15MinTable | 1.3.6.1.4.1.498.6.13.5.1 | not-accessible | The uas7022 Near End Current table. | |
| uas7022NearEndCurrent15MinEntry | 1.3.6.1.4.1.498.6.13.5.1.1 | not-accessible | An entry in the uas7022 Near End Current table. | |
| SCI uas7022NearEndCurrent15MinIndex | 1.3.6.1.4.1.498.6.13.5.1.1.1 | SCinstance | read-only | Integer value which uniquely identifies the UAS7022 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf slot location (01-32) L (byte value) - line number (01) D (byte value) - drop number (00) i (byte value) - interface number (01-02) |
| OCT uas7022NearEndCurrent15MinStat | 1.3.6.1.4.1.498.6.13.5.1.1.2 | OCTET STRING | read-only | Returns a bitwise snapshot of the current 15Min statistics. 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 2^9 ES . 1.0 2^7 2.7 f/u 2.6 2^6 . 2.0 2^0 3.7 f/u 3.6 f/u 3.5 f/u 3.4 f/u 3.3 f/u 3.2 2^9 SES . 3.0 2^7 4.7 f/u 4.6 2^6 SES . 4.0 2^0 5.7 f/u 5.6 f/u 5.5 f/u 5.4 f/u 5.3 f/u 5.2 Counter Overflow (>65535) BBE 5.1 2^15 5.0 2^14 6.7 f/u 6.6 2^13 BBE . 6.0 2^7 7.7 f/u 7.6 2^6 BBE . 7.0 2^0 8.7 f/u 8.6 f/u 8.5 f/u 8.4 f/u 8.3 f/u 8.2 2^9 UAS . 8.0 2^7 9.7 f/u 9.6 2^6 UAS . 9.0 2^0 10.7 f/u 10.6 f/u 10.5 f/u 10.4 f/u 10.3 f/u 10.2 Counter Overflow (>65535) LCV 10.1 2^15 10.0 2^14 11.7 f/u 11.6 2^13 LCV . 11.0 2^7 12.7 f/u 12.6 2^6 LCV . 12.0 2^0 Valid [i]nterface = 1-2 |
| uas7022NearEndIntervalTable | 1.3.6.1.4.1.498.6.13.5.2 | not-accessible | The uas7022 Near End Interval table. | |
| uas7022NearEndIntervalEntry | 1.3.6.1.4.1.498.6.13.5.2.1 | not-accessible | An entry in the Near End Interval table. | |
| SCI uas7022NearEndIntervalIndex | 1.3.6.1.4.1.498.6.13.5.2.1.1 | SCinstance | read-only | Integer value which uniquely identifies the UAS7022 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf slot location (01-32) L (byte value) - line number (01) D (byte value) - drop number (00) i (byte value) - interface number (01-02) |
| INT uas7022NearEndIntervalNumber | 1.3.6.1.4.1.498.6.13.5.2.1.2 | INTEGER | read-only | The number of Errored Seconds encountered by an E1 interface in one of the previous 16, individual 15 minute, intervals. |
| OCT uas7022NearEndIntervalStat | 1.3.6.1.4.1.498.6.13.5.2.1.3 | OCTET STRING | read-only | Returns a bitwise map of the interface in one of the previous 16, individual 15 minute, intervals. 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 2^9 ES . 1.0 2^7 2.7 f/u 2.6 2^6 . 2.0 2^0 3.7 f/u 3.6 f/u 3.5 f/u 3.4 f/u 3.3 f/u 3.2 2^9 SES . 3.0 2^7 4.7 f/u 4.6 2^6 SES . 4.0 2^0 5.7 f/u 5.6 f/u 5.5 f/u 5.4 f/u 5.3 f/u 5.2 Counter Overflow (>65535) BBE 5.1 2^15 5.0 2^14 6.7 f/u 6.6 2^13 BBE . 6.0 2^7 7.7 f/u 7.6 2^6 BBE . 7.0 2^0 8.7 f/u 8.6 f/u 8.5 f/u 8.4 f/u 8.3 f/u 8.2 2^9 UAS . 8.0 2^7 9.7 f/u 9.6 2^6 UAS . 9.0 2^0 10.7 f/u 10.6 f/u 10.5 f/u 10.4 f/u 10.3 f/u 10.2 Counter Overflow (>65535) LCV 10.1 2^15 10.0 2^14 11.7 f/u 11.6 2^13 LCV . 11.0 2^7 12.7 f/u 12.6 2^6 LCV . 12.0 2^0 Valid [i]nterface = 1-2 |
| uas7022NearEndCurrent24HrTable | 1.3.6.1.4.1.498.6.13.5.3 | not-accessible | The Near End Current 24 Hr table. | |
| uas7022NearEndCurrent24HrEntry | 1.3.6.1.4.1.498.6.13.5.3.1 | not-accessible | An entry in the Near End Current 24 hr table. | |
| SCI uas7022NearEndCurrent24HrIndex | 1.3.6.1.4.1.498.6.13.5.3.1.1 | SCinstance | read-only | Integer value which uniquely identifies the UAS7022 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf slot location (01-32) L (byte value) - line number (01) D (byte value) - drop number (00) i (byte value) - interface number (01-02) |
| OCT uas7022NearEndCurrent24HrStat | 1.3.6.1.4.1.498.6.13.5.3.1.2 | OCTET STRING | read-only | Returns a bitwise map of the current 24 hour table 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 1: Counter Overflow (>65535) ES 1.1 2^15 1.0 2^14 2.7 f/u 2.6 2^13 ES . 2.0 2^7 3.7 f/u 3.6 2^6 ES . 3.0 2^0 4.7 f/u 4.6 f/u 4.5 f/u 4.4 f/u 4.3 f/u 4.2 1: Counter Overflow (>65535) SES 4.1 2^15 4.0 2^14 5.7 f/u 5.6 2^13 SES . 5.0 2^7 6.7 f/u 6.6 2^6 SES . 6.0 2^0 7.7 f/u 7.6 f/u 7.5 f/u 7.4 f/u 7.3 f/u 7.2 1: Counter Overflow (>65535) BBE 7.1 2^15 7.0 2^14 8.7 f/u 8.6 2^13 BBE . 8.0 2^7 9.7 f/u 9.6 2^6 BBE . 9.0 2^0 10.7 f/u 10.6 f/u 10.5 f/u 10.4 f/u 10.3 f/u 10.2 1: Counter Overflow (>65535) UAS 10.1 2^15 10.0 2^14 11.7 f/u 11.6 2^13 UAS . 11.0 2^7 12.7 f/u 12.6 2^6 UAS . 12.0 2^0 13.7 f/u 13.6 f/u 13.5 f/u 13.4 f/u 13.3 f/u 13.2 1: Counter Overflow (>65535) LCV 13.1 2^15 13.0 2^14 14.7 f/u 14.6 2^13 LCV . 14.0 2^7 15.7 f/u 15.6 2^6 LCV . 15.0 2^0 Valid [i]nterface = 1-2 |
| uas7022NearEndRecent24HrTable | 1.3.6.1.4.1.498.6.13.5.4 | not-accessible | The Near End Recent 24Hr table. | |
| uas7022NearEndRecent24HrEntry | 1.3.6.1.4.1.498.6.13.5.4.1 | not-accessible | An entry in the E1 Total table. | |
| SCI uas7022NearEndRecent24HrIndex | 1.3.6.1.4.1.498.6.13.5.4.1.1 | SCinstance | read-only | Integer value which uniquely identifies the UAS7022 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf slot location (01-32) L (byte value) - line number (01) D (byte value) - drop number (00) i (byte value) - interface number (01-02) |
| OCT uas7022NearEndRecent24HrStat | 1.3.6.1.4.1.498.6.13.5.4.1.2 | OCTET STRING | read-only | Returns a bitwise map of the current 24 hour table 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 1: Counter Overflow (>65535) ES 1.1 2^15 1.0 2^14 2.7 f/u 2.6 2^13 ES . 2.0 2^7 3.7 f/u 3.6 2^6 ES . 3.0 2^0 4.7 f/u 4.6 f/u 4.5 f/u 4.4 f/u 4.3 f/u 4.2 1: Counter Overflow (>65535) SES 4.1 2^15 4.0 2^14 5.7 f/u 5.6 2^13 SES . 5.0 2^7 6.7 f/u 6.6 2^6 SES . 6.0 2^0 7.7 f/u 7.6 f/u 7.5 f/u 7.4 f/u 7.3 f/u 7.2 1: Counter Overflow (>65535) BBE 7.1 2^15 7.0 2^14 8.7 f/u 8.6 2^13 BBE . 8.0 2^7 9.7 f/u 9.6 2^6 BBE . 9.0 2^0 10.7 f/u 10.6 f/u 10.5 f/u 10.4 f/u 10.3 f/u 10.2 1: Counter Overflow (>65535) UAS 10.1 2^15 10.0 2^14 11.7 f/u 11.6 2^13 UAS . 11.0 2^7 12.7 f/u 12.6 2^6 UAS . 12.0 2^0 13.7 f/u 13.6 f/u 13.5 f/u 13.4 f/u 13.3 f/u 13.2 1: Counter Overflow (>65535) LCV 13.1 2^15 13.0 2^14 14.7 f/u 14.6 2^13 LCV . 14.0 2^7 15.7 f/u 15.6 2^6 LCV . 15.0 2^0 Valid [i]nterface = 1-2 |
| uas7022FarEndCurrent15MinTable | 1.3.6.1.4.1.498.6.13.5.5 | not-accessible | The uas7022 Far End Current 15 minute table. | |
| uas7022FarEndCurrent15MinEntry | 1.3.6.1.4.1.498.6.13.5.5.1 | not-accessible | An entry in the uas7022 Far End Current 15 Minute table. | |
| SCI uas7022FarEndCurrent15MinIndex | 1.3.6.1.4.1.498.6.13.5.5.1.1 | SCinstance | read-only | Integer value which uniquely identifies the UAS7022 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf slot location (01-32) L (byte value) - line number (01) D (byte value) - drop number (00) i (byte value) - interface number (01-02) |
| OCT uas7022FarEndCurrent15MinStat | 1.3.6.1.4.1.498.6.13.5.5.1.2 | OCTET STRING | read-only | Returns a bitwise map of the far end interface in one of the previous 16, individual 15 minute, intervals. 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 2^9 ES . 1.0 2^7 2.7 f/u 2.6 2^6 . 2.0 2^0 3.7 f/u 3.6 f/u 3.5 f/u 3.4 f/u 3.3 f/u 3.2 2^9 SES . 3.0 2^7 4.7 f/u 4.6 2^6 SES . 4.0 2^0 5.7 f/u 5.6 f/u 5.5 f/u 5.4 f/u 5.3 f/u 5.2 Counter Overflow (>65535) BBE 5.1 2^15 5.0 2^14 6.7 f/u 6.6 2^13 BBE . 6.0 2^7 7.7 f/u 7.6 2^6 BBE . 7.0 2^0 8.7 f/u 8.6 f/u 8.5 f/u 8.4 f/u 8.3 f/u 8.2 2^9 UAS . 8.0 2^7 9.7 f/u 9.6 2^6 UAS . 9.0 2^0 Valid [i]nterface = 1-2 |
| uas7022FarEndIntervalTable | 1.3.6.1.4.1.498.6.13.5.6 | not-accessible | The uas7022 FarEnd Interval table. | |
| uas7022FarEndIntervalEntry | 1.3.6.1.4.1.498.6.13.5.6.1 | not-accessible | An entry in the Interval table. | |
| SCI uas7022FarEndIntervalIndex | 1.3.6.1.4.1.498.6.13.5.6.1.1 | SCinstance | read-only | Integer value which uniquely identifies the UAS7022 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf slot location (01-32) L (byte value) - line number (01) D (byte value) - drop number (00) i (byte value) - interface number (01-02) |
| INT uas7022FarEndIntervalNumber | 1.3.6.1.4.1.498.6.13.5.6.1.2 | INTEGER | read-only | A number between 1 and 16, where 1 is the most recently completed 15 minute interval and 16 is the least recently completed 15 minutes interval (assuming that all 16 intervals are valid). |
| OCT uas7022FarEndIntervalStat | 1.3.6.1.4.1.498.6.13.5.6.1.3 | OCTET STRING | read-only | Returns a bitwise map of statistics for the far end interface in the current 15 minute interval. 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 2^9 ES . 1.0 2^7 2.7 f/u 2.6 2^6 . 2.0 2^0 3.7 f/u 3.6 f/u 3.5 f/u 3.4 f/u 3.3 f/u 3.2 2^9 SES . 3.0 2^7 4.7 f/u 4.6 2^6 SES . 4.0 2^0 5.7 f/u 5.6 f/u 5.5 f/u 5.4 f/u 5.3 f/u 5.2 Counter Overflow (>65535) BBE 5.1 2^15 5.0 2^14 6.7 f/u 6.6 2^13 BBE . 6.0 2^7 7.7 f/u 7.6 2^6 BBE . 7.0 2^0 8.7 f/u 8.6 f/u 8.5 f/u 8.4 f/u 8.3 f/u 8.2 2^9 UAS . 8.0 2^7 9.7 f/u 9.6 2^6 UAS . 9.0 2^0 Valid [i]nterface = 1-2 |
| uas7022FarEndCurrent24HrTable | 1.3.6.1.4.1.498.6.13.5.7 | not-accessible | The Far End Current 24 Hour table. | |
| uas7022FarEndCurrent24HrEntry | 1.3.6.1.4.1.498.6.13.5.7.1 | not-accessible | An entry in the Far End Current 24 Hr table. | |
| SCI uas7022FarEndCurrent24HrIndex | 1.3.6.1.4.1.498.6.13.5.7.1.1 | SCinstance | read-only | Integer value which uniquely identifies the UAS7022 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf slot location (01-32) L (byte value) - line number (01) D (byte value) - drop number (00) i (byte value) - interface number (01-02) |
| OCT uas7022FarEndCurrent24HrStat | 1.3.6.1.4.1.498.6.13.5.7.1.2 | OCTET STRING | read-only | Returns a bitwise map of statistics for the interface in the current 24 hour interval. 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 1: Counter Overflow (>65535) ES 1.1 2^15 1.0 2^14 2.7 f/u 2.6 2^13 ES . 2.0 2^7 3.7 f/u 3.6 2^6 ES . 3.0 2^0 4.7 f/u 4.6 f/u 4.5 f/u 4.4 f/u 4.3 f/u 4.2 1: Counter Overflow (>65535) SES 4.1 2^15 4.0 2^14 5.7 f/u 5.6 2^13 SES . 5.0 2^7 6.7 f/u 6.6 2^6 SES . 6.0 2^0 7.7 f/u 7.6 f/u 7.5 f/u 7.4 f/u 7.3 f/u 7.2 1: Counter Overflow (>65535) BBE 7.1 2^15 7.0 2^14 8.7 f/u 8.6 2^13 BBE . 8.0 2^7 9.7 f/u 9.6 2^6 BBE . 9.0 2^0 10.7 f/u 10.6 f/u 10.5 f/u 10.4 f/u 10.3 f/u 10.2 1: Counter Overflow (>65535) UAS 10.1 2^15 10.0 2^14 11.7 f/u 11.6 2^13 UAS . 11.0 2^7 12.7 f/u 12.6 2^6 UAS . 12.0 2^0 Valid [i]nterface = 1-2 |
| uas7022FarEndRecent24HrTable | 1.3.6.1.4.1.498.6.13.5.8 | not-accessible | The Far End Recent 24 Hour table. | |
| uas7022FarEndRecent24HrEntry | 1.3.6.1.4.1.498.6.13.5.8.1 | not-accessible | An entry in the Far End Recent 24 Hr table. | |
| SCI uas7022FarEndRecent24HrIndex | 1.3.6.1.4.1.498.6.13.5.8.1.1 | SCinstance | read-only | Integer value which uniquely identifies the UAS7022 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf slot location (01-32) L (byte value) - line number (01) D (byte value) - drop number (00) i (byte value) - interface number (01-02) |
| OCT uas7022FarEndRecent24HrStat | 1.3.6.1.4.1.498.6.13.5.8.1.2 | OCTET STRING | read-only | Returns a bitwise map of statistics for the interface in the Recent 24 hour interval. 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 1: Counter Overflow (>65535) ES 1.1 2^15 1.0 2^14 2.7 f/u 2.6 2^13 ES . 2.0 2^7 3.7 f/u 3.6 2^6 ES . 3.0 2^0 4.7 f/u 4.6 f/u 4.5 f/u 4.4 f/u 4.3 f/u 4.2 1: Counter Overflow (>65535) SES 4.1 2^15 4.0 2^14 5.7 f/u 5.6 2^13 SES . 5.0 2^7 6.7 f/u 6.6 2^6 SES . 6.0 2^0 7.7 f/u 7.6 f/u 7.5 f/u 7.4 f/u 7.3 f/u 7.2 1: Counter Overflow (>65535) BBE 7.1 2^15 7.0 2^14 8.7 f/u 8.6 2^13 BBE . 8.0 2^7 9.7 f/u 9.6 2^6 BBE . 9.0 2^0 10.7 f/u 10.6 f/u 10.5 f/u 10.4 f/u 10.3 f/u 10.2 1: Counter Overflow (>65535) UAS 10.1 2^15 10.0 2^14 11.7 f/u 11.6 2^13 UAS . 11.0 2^7 12.7 f/u 12.6 2^6 UAS . 12.0 2^0 Valid [i]nterface = 1-2 |
| uas7022NearEndUnavailableTimeRegTable | 1.3.6.1.4.1.498.6.13.5.9 | not-accessible | The uas7022 Near End Unavailable Time Register table. | |
| uas7022NearEndUnavailableTimeRegEntry | 1.3.6.1.4.1.498.6.13.5.9.1 | not-accessible | An entry in the Near End Unavailable Time Register table. | |
| SCI uas7022NearEndUnavailableTimeRegIndex | 1.3.6.1.4.1.498.6.13.5.9.1.1 | SCinstance | read-only | Integer value which uniquely identifies the UAS7022 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf slot location (01-32) L (byte value) - line number (01) D (byte value) - drop number (00) i (byte value) - interface number (01-02) |
| INT uas7022NearEndUnavailableTimeRegNumber | 1.3.6.1.4.1.498.6.13.5.9.1.2 | INTEGER | read-only | A number between 1 and 6, where the number is the number of the NearEndUnavailable Time Register. Valid [i]nterface = 1-2 |
| INT uas7022NearEndUnavailableTimeRegStart | 1.3.6.1.4.1.498.6.13.5.9.1.3 | INTEGER | read-only | Start time of one of the NearEndUnavailable Time Registers. Valid [i]nterface = 1-2 |
| INT uas7022NearEndUnavailableTimeRegStop | 1.3.6.1.4.1.498.6.13.5.9.1.4 | INTEGER | read-only | Stop time of one of the NearEndUnavailable Time Registers. Valid [i]nterface = 1-2 |
| uas7022FarEndUnavailableTimeRegTable | 1.3.6.1.4.1.498.6.13.5.10 | not-accessible | The uas7022 Far End Unavailable Time Register table. | |
| uas7022FarEndUnavailableTimeRegEntry | 1.3.6.1.4.1.498.6.13.5.10.1 | not-accessible | An entry in the Far End Unavailable Time Register table. | |
| SCI uas7022FarEndUnavailableTimeRegIndex | 1.3.6.1.4.1.498.6.13.5.10.1.1 | SCinstance | read-only | Integer value which uniquely identifies the UAS7022 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf slot location (01-32) L (byte value) - line number (01) D (byte value) - drop number (00) i (byte value) - interface number (01-02) |
| INT uas7022FarEndUnavailableTimeRegNumber | 1.3.6.1.4.1.498.6.13.5.10.1.2 | INTEGER | read-only | A number between 1 and 6, where the number is the number of the Unavailable Time Register. Valid [i]nterface = 1-2 |
| INT uas7022FarEndUnavailableTimeRegStart | 1.3.6.1.4.1.498.6.13.5.10.1.3 | INTEGER | read-only | Start time of one of the Unavailable Time Registers. Valid [i]nterface = 1-2 |
| INT uas7022FarEndUnavailableTimeRegStop | 1.3.6.1.4.1.498.6.13.5.10.1.4 | INTEGER | read-only | Stop time of one of the Unavailable Time Registers. Valid [i]nterface = 1-2 |
| uas7022Alarms | 1.3.6.1.4.1.498.6.13.6 | |||
| uas7022NoResponseAlm | 1.3.6.1.4.1.498.6.13.6.1 | |||
| uas7022DiagRxErrAlm | 1.3.6.1.4.1.498.6.13.6.2 | |||
| uas7022PowerUpAlm | 1.3.6.1.4.1.498.6.13.6.3 | |||
| uas7022TimingLoss | 1.3.6.1.4.1.498.6.13.6.4 | |||
| uas7022LCV | 1.3.6.1.4.1.498.6.13.6.5 | |||
| uas7022LossOfSignal | 1.3.6.1.4.1.498.6.13.6.6 | |||
| uas7022LossOfFrame | 1.3.6.1.4.1.498.6.13.6.7 | |||
| uas7022AlarmIndSignal | 1.3.6.1.4.1.498.6.13.6.8 | |||
| uas7022NEES | 1.3.6.1.4.1.498.6.13.6.9 | |||
| uas7022NEBBE | 1.3.6.1.4.1.498.6.13.6.10 | |||
| uas7022NESES | 1.3.6.1.4.1.498.6.13.6.11 | |||
| uas7022NEUAS | 1.3.6.1.4.1.498.6.13.6.12 | |||
| uas7022FEES | 1.3.6.1.4.1.498.6.13.6.13 | |||
| uas7022FEBBE | 1.3.6.1.4.1.498.6.13.6.14 | |||
| uas7022FESES | 1.3.6.1.4.1.498.6.13.6.15 | |||
| uas7022FEUAS | 1.3.6.1.4.1.498.6.13.6.16 | |||
| uas7022RAI | 1.3.6.1.4.1.498.6.13.6.17 | |||
| uas7022AlarmConfig | 1.3.6.1.4.1.498.6.13.7 | |||
| uas7022NearEndAlarmConfigTable | 1.3.6.1.4.1.498.6.13.7.1 | not-accessible | The uas7022NearEndAlarmConfigTable contains entries that configure alarm reporting. The structure of the table is such that alarm configuration is supported on a unit and interface basis, and then on an alarm type basis within the interface. | |
| uas7022NearEndAlarmConfigEntry | 1.3.6.1.4.1.498.6.13.7.1.1 | not-accessible | An entry in the Near End Alarm Configuration table. | |
| SCI uas7022NearEndAlarmConfigIndex | 1.3.6.1.4.1.498.6.13.7.1.1.1 | SCinstance | read-only | Integer value which uniquely identifies the UAS7022 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf slot location (01-32) L (byte value) - line number (01) D (byte value) - drop number (00) i (byte value) - interface number (01-02) |
| OID uas7022NearEndAlarmConfigIdentifier | 1.3.6.1.4.1.498.6.13.7.1.1.2 | OBJECT IDENTIFIER | read-only | format: iso.org.dod.internet.private.enterprises.gdc. dsx1.uas7022.uas7022Alarms.ALM example: 1.3.6.1.4.1.498.6.13.6.ALM where ALM = 1 for uas7022NoResponse alarm, 2 for uas7022DiagRxErr alarm, etc., as specified in the Alarm Definitions above. |
| INT uas7022NearEndAlarmCountWindow | 1.3.6.1.4.1.498.6.13.7.1.1.3 | INTEGER | read-write | This variable sets/reads the alarm window. This window is used with the alarm threshold to determine how long the alarm should be active before reporting. Default: disabled(1) |
| INT uas7022NearEndAlarmCountThreshold | 1.3.6.1.4.1.498.6.13.7.1.1.4 | INTEGER | read-write | This function sets/reads the alarm threshold criteria. This threshold is used along with the the alarm window to determine the number of instances in a given time frame for an alarm to occur before the alarm is considered active. Default: thresGT1(1) |
| uas7022FarEndAlarmConfigTable | 1.3.6.1.4.1.498.6.13.7.2 | not-accessible | The uas7022FarEndAlarmConfigTable contains entries that configure alarm reporting. The structure of the table is such that alarm configuration is supported on a unit and interface basis, and then on an alarm type basis within the interface. | |
| uas7022FarEndAlarmConfigEntry | 1.3.6.1.4.1.498.6.13.7.2.1 | not-accessible | An entry in the Far End Alarm Configuration table. | |
| SCI uas7022FarEndAlarmConfigIndex | 1.3.6.1.4.1.498.6.13.7.2.1.1 | SCinstance | read-only | Integer value which uniquely identifies the UAS7022 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf slot location (01-32) L (byte value) - line number (01) D (byte value) - drop number (00) i (byte value) - interface number (01-02) |
| OID uas7022FarEndAlarmConfigIdentifier | 1.3.6.1.4.1.498.6.13.7.2.1.2 | OBJECT IDENTIFIER | read-only | format: iso.org.dod.internet.private.enterprises.gdc. dsx1.uas7022.uas7022Alarms.ALM example: 1.3.6.1.4.1.498.6.13.6.ALM where ALM = 1 for uas7022NoResponse alarm, 2 for uas7022DiagRxErr alarm, etc., as specified in the Alarm Definitions above. |
| INT uas7022FarEndAlarmCountWindow | 1.3.6.1.4.1.498.6.13.7.2.1.3 | INTEGER | read-write | This variable sets/reads the alarm window. This window is used with the alarm threshold to determine how long the alarm should be active before reporting. Default: disabled(1) |
| INT uas7022FarEndAlarmCountThreshold | 1.3.6.1.4.1.498.6.13.7.2.1.4 | INTEGER | read-write | This function sets/reads the alarm threshold criteria. This threshold is used along with the the alarm window to determine the number of instances in a given time frame for an alarm to occur before the alarm is considered active. Default: thresGT1(1) |
| uas7022LocalAlarmConfigTable | 1.3.6.1.4.1.498.6.13.7.3 | not-accessible | The uas7022LocalAlarmConfigTable contains entries that configure alarm reporting to the alarm card. | |
| uas7022LocalAlarmConfigEntry | 1.3.6.1.4.1.498.6.13.7.3.1 | not-accessible | An entry in the Local Alarm Configuration table. | |
| SCI uas7022LocalAlarmConfigIndex | 1.3.6.1.4.1.498.6.13.7.3.1.1 | SCinstance | read-only | Integer value which uniquely identifies the UAS7022 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf slot location (01-32) L (byte value) - line number (01) D (byte value) - drop number (00) i (byte value) - interface number (01-02) |
| INT uas7022UASNE | 1.3.6.1.4.1.498.6.13.7.3.1.2 | INTEGER | read-write | Disables or enables the alarm on the Major buss or Minor buss. Valid [i]nterface = 1-2 |
| INT uas7022SESNE | 1.3.6.1.4.1.498.6.13.7.3.1.3 | INTEGER | read-write | Disables or enables the alarm on the Major buss or Minor buss. Valid [i]nterface = 1-2 |
| INT uas7022BBENE | 1.3.6.1.4.1.498.6.13.7.3.1.4 | INTEGER | read-write | Disables or enables the alarm on the Major buss or Minor buss. Valid [i]nterface = 1-2 |
| INT uas7022ESNE | 1.3.6.1.4.1.498.6.13.7.3.1.5 | INTEGER | read-write | Disables or enables the alarm on the Major buss or Minor buss. Valid [i]nterface = 1-2 |
| INT uas7022UASFE | 1.3.6.1.4.1.498.6.13.7.3.1.6 | INTEGER | read-write | Disables or enables the alarm on the Major buss or Minor buss. Valid [i]nterface = 1-2 |
| INT uas7022SESFE | 1.3.6.1.4.1.498.6.13.7.3.1.7 | INTEGER | read-write | Disables or enables the alarm on the Major buss or Minor buss. Valid [i]nterface = 1-2 |
| INT uas7022BBEFE | 1.3.6.1.4.1.498.6.13.7.3.1.8 | INTEGER | read-write | Disables or enables the alarm on the Major buss or Minor buss. Valid [i]nterface = 1-2 |
| INT uas7022ESFE | 1.3.6.1.4.1.498.6.13.7.3.1.9 | INTEGER | read-write | Disables or enables the alarm on the Major buss or Minor buss. Valid [i]nterface = 1-2 |
| INT uas7022LOS | 1.3.6.1.4.1.498.6.13.7.3.1.10 | INTEGER | read-write | Disables or enables the alarm on the Major buss or Minor buss. Valid [i]nterface = 1-2 |
| INT uas7022LOF | 1.3.6.1.4.1.498.6.13.7.3.1.11 | INTEGER | read-write | Disables or enables the alarm on the Major buss or Minor buss. Valid [i]nterface = 1-2 |
| INT uas7022AIS | 1.3.6.1.4.1.498.6.13.7.3.1.12 | INTEGER | read-write | Disables or enables the alarm on the Major buss or Minor buss. Valid [i]nterface = 1-2 |
| INT uas7022TmgLoss | 1.3.6.1.4.1.498.6.13.7.3.1.13 | INTEGER | read-write | Disables or enables the alarm on the Major buss or Minor buss. Valid [i]nterface = 1-2 |
| INT uas7022LCVs | 1.3.6.1.4.1.498.6.13.7.3.1.14 | INTEGER | read-write | Disables or enables the alarm on the Major buss or Minor buss. Valid [i]nterface = 1-2 |
| INT uas7022NtwkRAI | 1.3.6.1.4.1.498.6.13.7.3.1.15 | INTEGER | read-write | Disables or enables the alarm on the Major buss or Minor buss. Valid [i]nterface = 1-2 |
RFC description
General DataComm (GDC) SNMP MIB for telecommunications equipment performance monitoring. Includes objects for tracking far-end current metrics, unavailable time registers, and alarm conditions on datacom devices.
Start monitoring General DataComm (GDC) UAS7022 universal access system with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.