All MIBs › FRI-OPT-MIB
Category: Domain: WAN/TDM, Frame Relay
Description: Codex CDX-6500 Frame Relay interface port configuration and statistics MIB for WAN connectivity management.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is FRI-OPT-MIB?
FRI-OPT-MIB is a Codex/Motorola-lineage vendor MIB providing Frame Relay interface port configuration and statistics for CDX-6500-series WAN access devices, serving as a general interface-level companion to the more specific FRDCE-OPT-MIB and FRDTE-OPT-MIB modules. It exposes station-level protocol group objects for Frame Relay ports on the device, used to configure and verify how a given interface communicates over the WAN link. Its monitoring role is largely configuration/software-status oriented, letting an administrator confirm protocol group settings for a port before troubleshooting connectivity problems. It shares its object naming and dependency structure directly with FRDCE-OPT-MIB and FRDTE-OPT-MIB, reflecting a common underlying CDX-6500 MIB design. It is used in legacy Frame Relay WAN deployments where Codex CDX-6500 devices provide the physical and data-link connectivity. Network engineers evaluating or troubleshooting this functionality can download the FRI-OPT-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in FRI-OPT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Codex CDX-6500 Frame Relay interface/WAN access device
Monitoring Examples
An administrator would poll cdx6500PCTStationProtocolGroup and cdx6500PSTStationProtocolGroup on a CDX-6500 port to confirm its Frame Relay protocol group configuration, useful when a newly provisioned WAN circuit fails to pass traffic and a protocol mismatch is suspected.
What Can Be Monitored
- Frame Relay port protocol group configuration
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| enterprises |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| codex | 1.3.6.1.4.1.449 | |||
| cdxProductSpecific | 1.3.6.1.4.1.449.2 | |||
| cdx6500 | 1.3.6.1.4.1.449.2.1 | |||
| cdx6500Configuration | 1.3.6.1.4.1.449.2.1.2 | |||
| cdx6500CfgProtocolGroup | 1.3.6.1.4.1.449.2.1.2.1 | |||
| cdx6500PCTPortProtocolGroup | 1.3.6.1.4.1.449.2.1.2.1.1 | |||
| cdx6500PPCTFRIPortTable | 1.3.6.1.4.1.449.2.1.2.1.1.31 | not-accessible | This table contains Frame Relay DTE Port configuration parameters. | |
| cdx6500PPCTFRIPortEntry | 1.3.6.1.4.1.449.2.1.2.1.1.31.1 | not-accessible | Entries in the FRI Port Configuration Table. | |
| INT friPCfgPortNumber | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.1 | INTEGER | read-only | Port number of this port. |
| INT friPCfgPortType | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.2 | INTEGER | read-only | Port type of the Port. |
| INT friPCfgConnectionType | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.3 | INTEGER | read-write | The Specified control signal handshake and clocking required for a connection to be made to this port : simp - simple, no control signals required. dtr - dedicated, require the data terminal ready signal (DTR). simpb - simple, no control signals required for data transmission and reception. By default output leads will be low. nc - Skipped during configuration. |
| INT friPCfgClockSource | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.4 | INTEGER | read-write | int - Internal clock source ext - External clock source. extint - Internal receive and external transmit clock source (DCE only). extlp - external receive and loopback transmit clock source (DTE only). EXTLP must be configured in conjunction with EXTINT. nc - Skipped during configuration. |
| INT friPCfgClockSpeed | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.5 | INTEGER | read-write | This is the speed of the port in bits per second, when using internal clocking. The highest available speed is dependent on the card type, and on the interface type. |
| INT friPCfgHighestStnNumber | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.6 | INTEGER | read-only | This is the highest station number that can be configured on the FRI port. It is used to limit the configuration of stations. |
| INT friPCfgFrameSeqCounting | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.7 | INTEGER | read-only | Port uses normal or extended frame sequence numbering: normal - normal sequencing (modulo 8) extended - extended sequencing (modulo 128). nc - Skipped during configuration. All stations on this port will be set to this value. |
| INT friPCfgPktSeqCounting | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.8 | INTEGER | read-write | Port uses normal or extended packet level sequence numbers normal - normal sequencing (modulo 8) extended - extended sequencing (modulo 128) nc - Skipped during configuration. This parameter must be set to the same value at both this FRI port and the remote FRI port. All stations on this port will be set to this value. |
| INT friPCfgCntrlProtocolSupport | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.9 | INTEGER | read-write | Whether ANSI T1.617 Annex D, CCITT Q.933 Annex A or LMI Support is enabled. annexD - Annex D is enabled. none - None is enabled. lmi - LMI is enabled. annexA - Annex A is enabled. auto - Auto-learn the Network control protocol type nc - Skipped during configuration. |
| INT friPCfgHighPriorityStn | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.10 | INTEGER | read-write | This parameter specifies a station who's PVC status has priority over all other stations when FRI same port back up is enabled. When the network reports this DLCI inactive, an alternate connection over a backup link is attempted. |
| INT friPCfgMaxVoiceBWBitsPerSec | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.11 | INTEGER | read-write | This parameter limits the bandwidth, in bits per sec (including overhead), for voice traffic passing through this frame relay port. A zero value disables any voice passing through this port. |
| INT friPCfgSegSizeVoicePresent | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.12 | INTEGER | read-write | Data packets to be segmented into this maximum frame size when voice is active on this port. segSize32 - 32 byte segments segSize64 - 64 byte segments segSize128 - 128 byte segments segSize256 - 256 byte segments segSize512 - 512 byte segments segSize1024 - 1024 byte segments nc - Skipped during configuration. |
| INT friPCfgSegSizeVoiceNotPresent | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.13 | INTEGER | read-write | Data packets to be segmented into this maximum frame size when voice is not active on this port. segSize32 - 32 byte segments segSize64 - 64 byte segments segSize128 - 128 byte segments segSize256 - 256 byte segments segSize512 - 512 byte segments segSize1024 - 1024 byte segments segSize2048 - 2048 byte segments segSize4096 - 4096 byte segments disable - segment size is 32768 bytes nc - Skipped during configuration. |
| INT friPCfgT391Timer | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.14 | INTEGER | read-write | This parameter is the Link Integrity Verification Timer polling period. The FRI port sends status enquiry messages to network every T391/nT1 seconds. |
| INT friPCfgT392Timer | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.15 | INTEGER | read-write | This parameter is the polling Cycle Verification Timer period. The FRI port expects status enquiry messages every T392/nT2 seconds. This parameter must be set to a value greater than N391/nT1, and applies only in bi-directional mode. |
| INT friPCfgN391PollCycle | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.16 | INTEGER | read-write | Full Status polling cycle. FRI port sends Full status enquiry messages to network every nN1 polls. |
| INT friPCfgN392ErrsDuringMonitoredEvents | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.17 | INTEGER | read-write | Error inactivity threshold. Number of errors during NN3 events that cause the station to be declared inactive. Should be less than or equal to nN3. |
| INT friPCfgN393MonitoredEvents | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.18 | INTEGER | read-write | Monitored events count for measuring nN3. nN2 errors during nN3 events will cause the station to be declared inactive. Should be greater than nN3. |
| INT friPCfgNT1PollTimer | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.19 | INTEGER | read-only | This parameter is the Link Integrity Verification Timer polling period. The FRI port sends status enquiry messages to network every T391/nT1 seconds. |
| INT friPCfgNT2VerificationTimer | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.20 | INTEGER | read-only | This parameter is the polling Cycle Verification Timer period. The FRI port expects status enquiry messages every T392/nT2 seconds. This parameter must be set to a value greater than N391/nT1, and applies only in bi-directional mode. |
| INT friPCfgNN1StatusPollingCycle | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.21 | INTEGER | read-only | Full Status polling cycle. FRI port sends Full status enquiry messages to network every nN1 polls. |
| INT friPCfgNN2ErrsDuringMonitoredEvents | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.22 | INTEGER | read-only | Error inactivity threshold. Number of errors during NN3 events that cause the station to be declared inactive. Should be less than or equal to nN3. |
| INT friPCfgNN3MonitoredEvents | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.23 | INTEGER | read-only | Monitored events count for measuring nN3. nN2 errors during nN3 events will cause the station to be declared inactive. Should be greater than nN3. |
| INT friPCfgInvertTXClock | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.24 | INTEGER | read-write | This parameter specifies whether the phase of the transmit clock should be inverted. Note: This parameter is primarily for X.21 electrical interfaces. no - Don't invert. yes - Invert. |
| STR friPCfgControlProtocolOptions | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.25 | DisplayString | read-write | These options control the PVC management protocol none - No option selected async - The port will send/receive asynchronous A-bit if it is performing Network side protocol functionality nbit - The port will send and accept N-bit messages dbit - The port will send and accept D-bit messages This forces ASYNC to be specified (dbit+async) dte-only - This forces a DTE Interface Type to remain as DTE, suppressing changes to BI-DIR using Annex A or D |
| INT friPCfgDiscardControlOptions | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.26 | INTEGER | read-write | This parameter controls the discard frame options none - No option selected debit - DE marked frames are discarded before non-DE frames |
| INT friPCfgStartSvcDlci | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.27 | INTEGER | read-write | The configured number is the lowest value DLCI the FRI port will allow for use of FR SVCs. A value of 0 means SVC procedures are not operating on this port and the signalling channel will not be active. |
| OCT friPCfgSubscriberNumber | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.28 | OCTET STRING | read-write | All stations on this port use this value for their calling address information element. The valid format of this entry is: xx...xx000101 or xx...xx000103 Where: xx...xx00 represents the address of the station in IA5/ASCII coded hex terminated with a NUL character suffix. For example, an address of 123 would be represented by the string 31323300. 0101 is the suffix used to specify E.164 Number Plan 0103 is the suffix used to specify X.121 Number Plan To send a call without the Subscriber Number IE, set the address string to NUL only. |
| INT friPCfgMaxFmif | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.29 | INTEGER | read-write | This is the value used for link layer core parameters information element negotiation of maximum frame mode information field (FRIF) size in bytes. The value applies to both inbound and outbound frames. The value is specified in outgoing SETUP messages and is the maximum accepted value on incoming SETUP messages. |
| INT friPCfgT200 | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.30 | INTEGER | read-write | This is the value in tenths of seconds (1/10 s) of the maximum time the DTE will wait for an acknowledgment of a transmitted Information frame. The DTE will continue retransmissions at an interval of T200 until the tries count expires or proper acknowledgment is received from the attached equipment. |
| INT friPCfgN200 | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.31 | INTEGER | read-write | This is the maximum number of times the DTE will retransmit in order to recover from a T200 timeout condition. If this count expires, the DTE will declare the LAPF link to be down and initiate link establishment procedures. |
| INT friPCfgWindowK | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.32 | INTEGER | read-write | This is the maximum sending window size which is the maximum number (k) of sequentially numbered I frames that may be outstanding (unacknowledged) at any given time. The recommended values are: Line speed (kbps) Window, k ----------------- -------------- less than 16 3 greater than 16 7 |
| INT friPCfgT203 | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.33 | INTEGER | read-write | The idle timer (T203) represents the maximum time in seconds allowed without frames being exchanged. If the link remains idle for this period of time, the DTE will send a supervisory frame with the poll bit set. A value of zero disables this timer. |
| INT friPCfgT303 | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.34 | INTEGER | read-write | The Setup Timer (T303) represents the maximum time in seconds allowed without a response to a SETUP message being received. Upon expiry, the SETUP message is retransmitted and the timer is restarted. The second expiry of the timer will cause the call to be cleared. |
| INT friPCfgT305 | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.35 | INTEGER | read-write | The Disconnect Timer (T305) represents the maximum time in seconds allowed without a response to a DISCONNECT message being received. Upon expiry, a RELEASE message is sent. |
| INT friPCfgT308 | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.36 | INTEGER | read-write | The Release Timer (T308) represents the maximum time in seconds allowed without a response to a RELEASE message being received. Upon expiry, the RELEASE message is retransmitted and the timer is restarted. The second expiry of the timer will cause the call to be cleared. |
| INT friPCfgT310 | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.37 | INTEGER | read-write | The Call Proceeding Timer (T310) value is in seconds. This timer is started when a CALL PROCEEDING response to a SETUP message is received. The timer is stopped when a CONNECT or DISCONNECT or RELEASE message is received. If the timer expires, the call will be cleared. |
| INT friPCfgControlProtocol | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.38 | INTEGER | read-write | This option controls whether the PVC management protocol acts like a DTE or a DCE DTE - This ports takes on the the DTE or User Side role DCE - This ports takes on the the DCE or Network Side role |
| INT friPCfguniState | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.39 | INTEGER | read-write | Enable FRF.12 UNI Segmentation. Peer must be enabled too. enable - Enable UNI Segmentation disable - Disable UNI Segmentation |
| INT friPCfguniSSVP | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.40 | INTEGER | read-only | UNI segment size when voice is present. Affects transmit path only. segSize64 - 64 byte segments segSize128 - 128 byte segments segSize256 - 256 byte segments segSize512 - 512 byte segments segSize1024 - 1024 byte segments |
| INT friPCfguniSSVNP | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.41 | INTEGER | read-write | UNI segment size when voice is not present. Affects transmit path only. segSize64 - 64 byte segments segSize128 - 128 byte segments segSize256 - 256 byte segments segSize512 - 512 byte segments segSize1024 - 1024 byte segments segSize2048 - 2048 byte segments segSize4096 - 4096 byte segments disable - this selection doesn't affect the packet size. UNI segmentation header will be inserted only. |
| INT friPCfguniSegDelay | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.42 | INTEGER | read-write | Discards a packet if any segment delays more than 10 seconds. Affects receive path only. enabled - discard the packet disabled - do not discard the packet |
| INT friPCfguniCheckPckSize | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.43 | INTEGER | read-write | Check if the packet size is larger than the node maximum packet size. enabled - discard packet than is larger than the maximum size. disabled - accept packet than is larger than the maximum size. |
| INT friPCfgElectricalInterfaceType | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.44 | INTEGER | read-write | Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 - X.21 Electrical Interface Type NONE - Electrically disabled |
| INT friPCfgV24ElectricalInterfaceOption | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.45 | INTEGER | read-write | Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal |
| INT friPCfgHighSpeedElectricalInterfaceOption | 1.3.6.1.4.1.449.2.1.2.1.1.31.1.46 | INTEGER | read-write | Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable |
| cdx6500PCTStationProtocolGroup | 1.3.6.1.4.1.449.2.1.2.1.3 | |||
| cdx6500SPCTFRIStationTable | 1.3.6.1.4.1.449.2.1.2.1.3.9 | not-accessible | This table contains Frame Relay DTE Station configuration parameters. | |
| cdx6500SPCTFRIStationEntry | 1.3.6.1.4.1.449.2.1.2.1.3.9.1 | not-accessible | Entries in the FRI Station Configuration Table. | |
| INT friSCfgPortNumber | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.1 | INTEGER | read-only | The FRI port number corresponding to this station. |
| INT friSCfgStnNumber | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.2 | INTEGER | read-only | The number of the configured FRI Station. |
| INT friSCfgStnType | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.3 | INTEGER | read-write | Identifies the type of station configured. annexG - This station uses X.25 signaling for layer 3. bypass - This station type bypasses layer 3. There is no signaling for SVC's on this station. voiceRelay - Not used in the current version. |
| INT friSCfgDLCI | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.4 | INTEGER | read-write | The Data Link Connection Identifier (DLCI) is the unique identifier for the station on the FRI Port. Its valid range is 0, 16 - 1007. A zero value in this field places the FRI station in DLCI auto-learn mode. In auto learn mode, the station is eligible for automatic assignment of an available network DLCI. A configured value of 16-1007 must match a DLCI on the FR networking node. NOTE: When a station record is configured for the first time, the DLCI prompt displays an auto-incrementing DLCI value. The DLCI's start from 16 for station 1, and increment by one for each station configured. If the station record is not saved to memory, a default DLCI value of zero is used. |
| INT friSCfgCommInfoRate | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.5 | INTEGER | read-write | This parameter (CIR) specifies the rate (in bits-per-second) that the Frame Relay network agrees to transfer information under congested conditions for the FRI Station. This value is used to throttle data on the FRI station for congestion control purposes. The CIR cannot be greater than the link speed. |
| INT friSCfgCommBurstSize | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.6 | INTEGER | read-write | This parameter (BC) specifies the maximum amount of data (in bits) that the Frame Relay network agrees to transfer over a time interval T = Committed Burst Size / Committed Information Rate.This must be greater than 1/20th of the Committed Information Rate.This is used for congestion control purposes. |
| INT friSCfgTransDelay | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.7 | INTEGER | read-write | This parameter is the expected one-way delay through the network. This is specified in milliseconds. |
| INT friSCfgCongControlMode | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.8 | INTEGER | read-write | This parameter controls the method of congestion control: normal - congestion control is normal disable - never enter Congested State (CTRL) congested - never enter a Non-Congested State (UCTRL) limit - congestion control is normal but limits the data rate to no lower than CIR. nc - Skipped during configuration |
| INT friSCfgLinkAddress | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.9 | INTEGER | read-write | The logical link address must be set to complementary values in this FRI Station and its corresponding remote FRI station: dte - station to have logical DTE address (A) dce - station to have logical DCE address (B) nc - Skipped during configuration. |
| INT friSCfgPVCChannels | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.10 | INTEGER | read-write | Number of logical channels used for Permanent Virtual Circuits. The total number of PVC and SVC channels on a station (logical link) should be kept as small as possible and consistent with needs. PVC connections must be configured in the PVC Table. |
| INT friSCfgStartingPVC | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.11 | INTEGER | read-write | This is the starting logical channel number for the Permanent Virtual Circuits on this FRI station. Not used if the number of PVCs = 0. |
| INT friSCfgSVCChannels | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.12 | INTEGER | read-write | Number of logical channels used in Switched Virtual Circuits. The total number of PVC and SVC channels on a station (logical link) should be kept as small as possible and consistent with needs. |
| INT friSCfgStartingSVC | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.13 | INTEGER | read-write | This is the starting logical channel number for the switched Virtual Circuits on this station (logical link). Not used if the number of SVCs = 0. |
| INT friSCfgVoiceSVCChannels | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.14 | INTEGER | read-write | Number of logical voice channels used in Switched Virtual Circuits.The total number of voice and data channels on a station (logical link) should be kept as small as possible and consistent with needs. |
| INT friSCfgInitialFrame | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.15 | INTEGER | read-write | Specify the initial frame required by other end for (logical) link startup: none - do nothing (other end initiates link-up) sabm - send SABM disc - send DISC, then SABM nc - Skipped during configuration |
| INT friSCfgT1RetryTimer | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.16 | INTEGER | read-write | T1 link retry timer value in tenths of a second (e.g. 30 = 3.0 seconds). |
| INT friSCfgT4PollTimer | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.17 | INTEGER | read-write | This sets the time an idle link is probed for assurance of connection to the remote FRI station. 0 - disable the timer X - X is in tenths of a second (e.g. 40 = 4.0 seconds) and must be set greater than T1. |
| INT friSCfgN2TransmissionTries | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.18 | INTEGER | read-write | The maximum number of attempts allowed to complete a transmission. |
| INT friSCfgKFrameWindow | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.19 | INTEGER | read-write | Frame level window size must be set to the same value at both this FRI station and the remote FRI station. |
| INT friSCfgWPacketWindow | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.20 | INTEGER | read-write | Packet level window size must be set to the same value at both this FRI station and the remote FRI station. |
| INT friSCfgPPacketSize | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.21 | INTEGER | read-write | This is the maximum X.25 packet size used on the station (logical link).For proper operation, this must be set to the same value at both this FRI station and the remote FRI station. |
| INT friSCfgDataQUpperThreshold | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.22 | INTEGER | read-write | This is the maximum number of data packets a channel on this station (logical link) will queue for transmission before invoking flow control to the attached channel |
| INT friSCfgDataQLowerThreshold | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.23 | INTEGER | read-write | This is the number of data packets a channel on this FRI station will have queued for transmission when it releases flow control to the attached channel |
| INT friSCfgRestartTimer | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.24 | INTEGER | read-write | Restart-Request timeout timer in seconds. If timer expires on this FRI station, the Restart request is sent again. |
| INT friSCfgResetTimer | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.25 | INTEGER | read-write | Reset-Request timeout timer in seconds. If timer expires on this FRI station, the Reset request is sent again. |
| INT friSCfgCallTimer | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.26 | INTEGER | read-write | Call-Request timeout timer in seconds. If timer expires on this FRI station, the call is cleared. |
| INT friSCfgClearTimer | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.27 | INTEGER | read-write | Clear-Request timeout timer in seconds. If timer expires on this FRI station, the Clear request is sent again. |
| STR friSCfgX25Options | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.28 | DisplayString | read-write | Select X.25 options on this station (logical link) as follows: NONE - no option specified CUG - check closed user group; otherwise, CUG passes transparently CAUSE - pass cause, diagnostic, code in outbound packets HOLD - hold calls over link restart INL - inter-node link. Link goes to another vanguard device INL may be a poor choice for high speed links. INLB is set with INL to improve performance of high speed links. INLB - set with INL options to improve performance if inter-node link is a high speed link. DELAY - Enable Delay and Path Trace on this link Any combination of above specified by summing (e.g. CUG+ CAUSE+....). |
| STR friSCfgRestrictedConnDest | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.29 | DisplayString | read-write | All calls entering this station will be routed to the destination specified in this parameter,irrespective of route selection table entries. For example, to route all calls to X.25 port 3, use X25-3. To route calls to SDLC port 2, station 4, use SDLC-2S4. Blank in this field disables this function. |
| STR friSCfgCUGMembership | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.30 | DisplayString | read-write | The station may be a member of up to 8 different Closed User Groups (CUGs).Each CUG membership must be a two digit number (except --) and separated by a comma. ( e.g. 12,34,56,09,02, 03). -- - No CUG Membership 00-99 - CUG Membership |
| INT friSCfgBillingRecords | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.31 | INTEGER | read-write | This controls whether billing (accounting) records will be created for calls on this FRI station. off - Billing records will not be created. on - Billing records will be created. nc - Skipped during configuration. |
| INT friSCfgFrameSegmenter | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.32 | INTEGER | read-write | Determine if this station will support the Frame Segmenter Header.The Frame Segmenter should be enabled if the frame relay port is configured to pass voice traffic. disabled - Frame Segmenter disabled. enabled - Frame Segmenter enabled. nc - Skipped during configuration. |
| INT friSCfgVoiceCongCtrlMode | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.33 | INTEGER | read-write | This parameter controls the method of voice congestion control: enabled - Station is forced into congestion when voice calls are detected. disabled - Station operates normally Use this parameter in voice applications, when the frame relay network can have more than 140ms of data buffered. One typical application is asymmetrical speeds. When this parameter is enabled, and voice is detected, delta T is forced to 50 ms and the BC is forced to 1/20 CIR. |
| INT friSCfgPeakUtilization | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.34 | INTEGER | read-write | The monitoring interval size specifies the time period to use when monitoring peak data link/CIR (Committed Information Rate) utilization. 0 - Disables this monitoring feature. 1 to 240 - The number of 64 second increments to use for the monitoring interval time period. For example: a value of 30 specifies a time duration equal to 30 * 64 seconds = 1920 seconds or 32 minutes. |
| INT friSCfgMaxInboundQueue | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.35 | INTEGER | read-write | This specifies the maximum number of frames from the network which may be queued in a BYPASS station. A smaller value may ve choosen for applications which experience objectable delays, if due to excessive growth of the BYPASS inbound queue. |
| INT friSCfgAnnexGRateReduction | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.36 | INTEGER | read-write | This parameter determines whether Annex G stations will invoke implicit congestion control when a link error is detected, reducing their transmitted information rate to 1/4 CIR. The rate will be gradually increased in the normal way as non-BECN frames are received. |
| INT friSCfgCctType | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.37 | INTEGER | read-write | Select the station circuit type defined for the Frame Relay line. pvc - station will operate on its assigned DLCI as a PVC. svc - station will operate on a selected DLCI as a SVC. |
| INT friSCfgCallControl | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.38 | INTEGER | read-write | This parameter is used to control the calling behavior of the SVC station. auto - the station will automatically initiate a FR SVC call on power up autd - the station will initiate a FR SVC call on demand of data to transmit recv - the station can be used to receive inbound FR SVC calls from attached network equipment cnorm - Controlled Normal. This allows Annex G stations to set up and disconnect Frame Relay SVC calls through Network Services |
| INT friSCfgRetryInterval | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.39 | INTEGER | read-write | This is the time interval between call attempts, in seconds, that a station configured to initiate an SVC call will use. If a call attempt fails, either because there was no response to the SETUP message or the response was a RELEASE, the station will wait this amount of time before sending the next SETUP message. |
| INT friSCfgCallAttempts | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.40 | INTEGER | read-write | This is the number of contiguous call attempts that a station configured to initiate an SVC call will make to establish the call. If this count expires, the station will not make any further call attempts. A station (or port or node) boot is required to re-initiate call attempts. A value of 0 means the station makes call attempts indefinitely. |
| INT friSCfgIdleInterval | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.41 | INTEGER | read-write | This is the idle time, in seconds, allowed for FRI station to remain idle. If the station using the SVC passes no data for this time period, the SVC will be cleared. If the SVC is cleared and the stations attempts to send data an SVC will be established for the station. |
| STR friSCfgIeNegotiation | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.42 | DisplayString | read-write | This allows the listing of parameters to be used in a SETUP/CONNECT message. dlci - If the station initiates a call, it will select the lowest value of DLCI available and specify it to be used for the SVC. llcp - If the station initiates a call it specifies a full set of Link Layer Core Parameters. If it receives a call LLCP is used to set CIR and BC. tpie - If set, the station will send a Traffic Priority IE. The value of the TP IE is determined by the application that causes the call to be made. This parameter is only effective on stations configured for CNORM Call Control. Any combination of above specified by summing (DLCI+LLCP). |
| OCT friSCfgSubaddress | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.43 | OCTET STRING | read-write | This specifies the station subaddress coded and an IE. it is coded as an IA5 string with type of subaddress NSAP and IA5 AFI prefix added. Incoming calls with a called subaddress of NSAP type and IA5 AFI prefix that match this configured string will connect to this station. If this parameter is blank, the corresponding IE is not sent on outgoing calls. Incoming calls without the corresponding IE can connect to this station. The valid format of this entry is: xx...xx000000 or xx...xx000000 Where: xx...xx00 represents the station number in IA5/ASCII coded hex terminated with a NUL character suffix. For example, a sub-address of 12 would be represented by the string 313200. To set the subaddress blank, set the address string to NUL only. |
| OCT friSCfgCalledNumber | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.44 | OCTET STRING | read-write | This is the address of the destination, in the appropriate numbering plan, to which a call will be placed by this station. Called Party Number is a manditory IE and should be specified if calls are originated by this station. The valid format of this entry is: xx...xx000101 or xx...xx000103 Where: xx...xx00 represents the address of the destination in IA5/ASCII coded hex terminated with a NUL character suffix. For example, an address of 123 would be represented by the string 31323300. 0101 is the suffix used to specify E.164 Number Plan 0103 is the suffix used to specify X.121 Number Plan |
| OCT friSCfgCalledSubaddress | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.45 | OCTET STRING | read-write | For outgoing calls, this specifies the calling subaddress IE coded as an IA5 string with type of subaddress NSAP and IA5 AFI prefix added. Incoming calls with a called subaddress of NSAP type and IA5 AFI prefix that match this configured string will connect to this station. If this parameter is blank, the corresponding IE is not sent on outgoing calls. Incoming calls without the corresponding IE can connect to this station. The valid format of this entry is: xx...xx000000 or xx...xx000000 Where: xx...xx00 represents the station number in IA5/ASCII coded hex terminated with a NUL character suffix. For example, a sub-address of 12 would be represented by the string 313200. To set the subaddress blank, set the address string to NUL only. |
| INT friSCfgMinCir | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.46 | INTEGER | read-write | This parameter specifies the minimum rate (in bits-per-second) that the Frame Relay network agrees to transfer information under congested conditions for the FRI Station. This value is used to throttle data on the FRI station for congestion control purposes. The MinCIR cannot be greater than the link speed. |
| INT friSCfgBurstExcess | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.47 | INTEGER | read-write | This parameter is negotiated during the call establishment phase of Frame Relay SVC calls. It has no effect on data transfer after the call has been established. |
| INT friSCfgE2EEnabled | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.48 | INTEGER | read-write | Enable End-to-End Segmentation. Peer must be enabled too. enabled - Enable End-to-End Segmentation disabled - Disable End-to-End Segmentation |
| INT friSCfgE2EType | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.49 | INTEGER | read-write | Type of End-to-End Segmentation. Peer must be configured in the same way. FRF12 - FRF.12 End-to-End Segmentation Motorola - Motorola End-to-End Segmentation |
| INT friSCfgE2ESSVP | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.50 | INTEGER | read-only | Segment size when voice is present. Affects transmit path only. segSize64 - 64 byte segments segSize128 - 128 byte segments segSize256 - 256 byte segments segSize512 - 512 byte segments segSize1024 - 1024 byte segments |
| INT friSCfgE2ESSVNP | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.51 | INTEGER | read-write | Segment size when voice is not present. Affects transmit path only. segSize64 - 64 byte segments segSize128 - 128 byte segments segSize256 - 256 byte segments segSize512 - 512 byte segments segSize1024 - 1024 byte segments segSize2048 - 2048 byte segments segSize4096 - 4096 byte segments disable - this selection doesn't affect the packet size. End-to-End segmentation header will be inserted only. |
| INT friSCfgE2ESegDelayEnabled | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.52 | INTEGER | read-write | Discards a packet if any segment delays more than 10 seconds. Affects receive path only. enabled - discard the packet disabled - do not discard the packet |
| INT friSCfgE2ECheckPckSize | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.53 | INTEGER | read-write | Check if the packet size is larger than the node maximum packet size. enabled - discard packet than is larger than the maximum size. disabled - accept packet than is larger than the maximum size. |
| INT friSCfgvoice_header | 1.3.6.1.4.1.449.2.1.2.1.3.9.1.54 | INTEGER | read-write | Voice Header. enabled - Enable Voice Header Insertion disabled - Disable Voice Header Insertion |
| cdx6500Statistics | 1.3.6.1.4.1.449.2.1.3 | |||
| cdx6500StatProtocolGroup | 1.3.6.1.4.1.449.2.1.3.1 | |||
| cdx6500PSTPortProtocolGroup | 1.3.6.1.4.1.449.2.1.3.1.1 | |||
| cdx6500PPSTFRIPStatsTable | 1.3.6.1.4.1.449.2.1.3.1.1.32 | |||
| cdx6500PPSTFRIPortTable | 1.3.6.1.4.1.449.2.1.3.1.1.32.1 | not-accessible | This table contains FRI Port Statistics parameters. | |
| cdx6500PPSTFRIPortEntry | 1.3.6.1.4.1.449.2.1.3.1.1.32.1.1 | not-accessible | Entries in the FRI Port Statistics Table. | |
| INT friPStatsPortNumber | 1.3.6.1.4.1.449.2.1.3.1.1.32.1.1.1 | INTEGER | read-only | The port number of the FRI port. |
| INT friPStatsPortType | 1.3.6.1.4.1.449.2.1.3.1.1.32.1.1.2 | INTEGER | read-only | Port type of this port. |
| INT friPStatsPortStatus | 1.3.6.1.4.1.449.2.1.3.1.1.32.1.1.3 | INTEGER | read-only | Specifies the current port status. enabled - Port is operational. disabled - Port has been disabled. busyOut - Port has been busied out. up - Port is up and operational. down - Port is down. na - Value not Available. |
| STR friPStatsConfiguredStns | 1.3.6.1.4.1.449.2.1.3.1.1.32.1.1.4 | DisplayString | read-only | A list of all the configured stations. |
| INT friPStatsPortSpeed | 1.3.6.1.4.1.449.2.1.3.1.1.32.1.1.5 | INTEGER | read-only | Message transmission speed in bits per second. |
| STR friPStatsOpCntrlProtocol | 1.3.6.1.4.1.449.2.1.3.1.1.32.1.1.6 | DisplayString | read-only | Control Protocol type learned from network. |
| STR friPStatsSPBackup | 1.3.6.1.4.1.449.2.1.3.1.1.32.1.1.7 | DisplayString | read-only | This indicates whether the same port backup is configured for this port. |
| INT friPStatsPriorityStn | 1.3.6.1.4.1.449.2.1.3.1.1.32.1.1.8 | INTEGER | read-only | This specifies the high priority station. |
| STR friPStatsLastStatsReset | 1.3.6.1.4.1.449.2.1.3.1.1.32.1.1.9 | DisplayString | read-only | This indicates the time stamp of the last statistics reset. |
| cdx6500PPSTFRIDataSummaryTable | 1.3.6.1.4.1.449.2.1.3.1.1.32.2 | not-accessible | This table contains FRI Port Data Summary Statistics parameters. | |
| cdx6500PPSTFRIDataSummaryEntry | 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1 | not-accessible | Entries in the FRI Port Data Summary Statistics Table. | |
| INT friDataSummPortNumber | 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.1 | INTEGER | read-only | The port number of the FRI port. |
| CTR friPStatsCharInTotal | 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.2 | Counter | read-only | Number of characters received since last boot or statistics reset. |
| CTR friPStatsCharOutTotal | 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.3 | Counter | read-only | Number of characters transmitted since last boot or statistics reset. |
| INT friPStatsCharInPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.4 | INTEGER | read-only | Average number of characters received per second. |
| INT friPStatsCharOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.5 | INTEGER | read-only | Average number of characters transmitted per second. |
| CTR friPStatsFramesInTotal | 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.6 | Counter | read-only | Number of frames received since last boot or statistics reset. |
| CTR friPStatsFramesOutTotal | 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.7 | Counter | read-only | Number of frames transmitted since last boot or statistics reset. |
| INT friPStatsFramesInPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.8 | INTEGER | read-only | Average number of frames received per second. |
| INT friPStatsFramesOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.9 | INTEGER | read-only | Average number of frames transmitted per second. |
| INT friPStatsAvFrameSizeIn | 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.10 | INTEGER | read-only | Average frame size of received frames. |
| INT friPStatsAvFrameSizeOut | 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.11 | INTEGER | read-only | Average size of transmitted frames. |
| INT friPStatsUtilIn | 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.12 | INTEGER | read-only | Port Utilization of incoming data. |
| INT friPStatsUtilOut | 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.13 | INTEGER | read-only | Port Utilization of outgoing data. |
| cdx6500PPSTFRISummaryTable | 1.3.6.1.4.1.449.2.1.3.1.1.32.3 | not-accessible | This table contains FRI Summary Statistics parameters. | |
| cdx6500PPSTFRISummaryEntry | 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1 | not-accessible | Entries in the FRI Summary Statistics Table. | |
| INT friSummPortNumber | 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.1 | INTEGER | read-only | The port number of the FRI port. |
| CTR friPStatsCRCErrors | 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.2 | Counter | read-only | Number of errors detected by Cyclic Redundancy Check since last node boot or reset of statistics. |
| CTR friPStatsOverrunErrors | 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.3 | Counter | read-only | Number of OverrunErrors detected since last node boot or reset of statistics. |
| CTR friPStatsFrameLengthErrors | 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.4 | Counter | read-only | Number of Frame Length Errors detected since last node boot or statistics reset. |
| CTR friPStatsUnderrunErrors | 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.5 | Counter | read-only | Number of Underrun Errors detected since last node boot or statistics reset. |
| CTR friPStatsUnknownDLCICount | 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.6 | Counter | read-only | This specifies the number of DLCIs not recognized. |
| INT friPStatsLastUnknownDLCI | 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.7 | INTEGER | read-only | This specifies the last unknown dlci received. |
| INT friPStatsSplittingRatio | 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.8 | INTEGER | read-only | The Frame Segmenter's splitting ratio calculated as a percentage of Number of frames segmented/Number of frames. |
| INT friPStatsTotalSegmentsLost | 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.9 | INTEGER | read-only | Total Segments lost by Frame Segmenter Receiver. |
| INT friPStatsMaxContiguousSegmentsLost | 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.10 | INTEGER | read-only | Maximum consecutive segments lost by Farme Segmenter Receiver. |
| INT friPStatsVoiceBWOnPort | 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.11 | INTEGER | read-only | Current amount of voice bandwidth allocated. |
| INT friPStatsFrameSegmenterSyncLost | 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.12 | INTEGER | read-only | Total number of times synchronization has been lost. |
| INT friPStatsStatusEnqSentFull | 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.13 | INTEGER | read-only | Number of status enquiries SENT FULL. |
| INT friPStatsFullStatusRecd | 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.14 | INTEGER | read-only | Number of full status received. |
| INT friPStatsStatusEnqSentLIV | 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.15 | INTEGER | read-only | Number of status enq sent LIV. |
| INT friPStatsLIVStatusRecd | 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.16 | INTEGER | read-only | Number of status update received. |
| INT friPStatsStatusEnqRecdFull | 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.17 | INTEGER | read-only | Number of Full status enq RCV bi-directional mode. |
| INT friPStatsStatusEnqRecdLIV | 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.18 | INTEGER | read-only | Number of LIV status enq RCV bi-directional mode. |
| INT friPStatsAsyncUpdateRecd | 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.19 | INTEGER | read-only | Number of async update received. |
| INT friPStatsSeqNumMismatch | 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.20 | INTEGER | read-only | Number of Sequence Number Mismatches occurred. |
| INT friPStatsTimeouts | 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.21 | INTEGER | read-only | Number of timeouts occurred. |
| cdx6500PPSTFRIISDNCallStatusTable | 1.3.6.1.4.1.449.2.1.3.1.1.32.4 | not-accessible | This table contains FRI ISDN Statistics parameters. | |
| cdx6500PPSTFRIISDNCallStatusEntry | 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1 | not-accessible | Entries in the FRI ISDN Statistics Table. | |
| INT friISDNCallStatusPortNumber | 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.1 | INTEGER | read-only | The port number of the FRI Port. |
| INT friPStatsNumRxCallsSinceLastReset | 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.2 | INTEGER | read-only | The number of inbound calls that were attempted since the last statistics reset. |
| INT friPStatsNumRxCallsRejected | 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.3 | INTEGER | read-only | The number of inbound calls that were rejected since the last statistics reset. |
| INT friPStatsRxLastCallFailureCause | 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.4 | INTEGER | read-only | The reason the last inbound call was rejected, since the last statistics reset. The posssible values are: noFailureReported - No call failure noAvailableVirtualPort - No virtual port available securityViolation - Password security failed noResourcesAvailable - No resources available callRejected - Call failed by Xircom card invalidPhoneNumber - Phone number is incorrect outgoingCallRequestTimeout - Outgoing call request timed out callCollision - Call collision virtualPortNotAvailable - This port is not available invalidConfiguration - Configuration is incorrect failureNotSupported - Failure is not supported na - Value Not Available. |
| STR friPStatsRxLastCalledNumber | 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.5 | DisplayString | read-only | The phone number of the virtual port of the last ISDN call made into this port. |
| STR friPStatsRxLastCallingNumber | 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.6 | DisplayString | read-only | The phone number of last party to make an ISDN call into this port. |
| STR friPStatsRxMinCallDuration | 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.7 | DisplayString | read-only | The minimum call duration of all inbound ISDN calls made into this port, since the last statistics reset. |
| STR friPStatsRxMaxCallDuration | 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.8 | DisplayString | read-only | The maximum call duration of all inbound ISDN calls made into this port, since the last statistics reset. |
| STR friPStatsRxAvgCallDuration | 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.9 | DisplayString | read-only | The average call duration of all inbound ISDN calls made into this port, since the last statistics reset. |
| INT friPStatsNumTxCallsSinceLastReset | 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.10 | INTEGER | read-only | The number of outbound calls that were attempted since the last statistics reset. |
| INT friPStatsNumTxCallsRejected | 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.11 | INTEGER | read-only | The number of outbound calls that were rejected since the last statistics reset. |
| INT friPStatsTxLastCallFailureCause | 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.12 | INTEGER | read-only | The reason the last outbound call was rejected, since the last statistics reset. The posssible values are: noFailureReported - No call failure noAvailableVirtualPort - No virtual port available securityViolation - Password security failed noResourcesAvailable - No resources available callRejected - Call failed by Xircom card invalidPhoneNumber - Phone number is incorrect outgoingCallRequestTimeout - Outgoing call request timed out callCollision - Call collision virtualPortNotAvailable - This port is not available invalidConfiguration - Configuration is incorrect failureNotSupported - Failure is not supported na - Value Not Available. |
| STR friPStatsTxLastCalledNumber | 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.13 | DisplayString | read-only | The phone number of the last ISDN call made by a virtual port from this port. |
| STR friPStatsTxLastCallingNumber | 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.14 | DisplayString | read-only | The phone number of the virtual port that made the last ISDN call from this port. |
| STR friPStatsTxMinCallDuration | 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.15 | DisplayString | read-only | The minimum call duration of all outbound ISDN calls made from this port, since the last statistics reset. |
| STR friPStatsTxMaxCallDuration | 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.16 | DisplayString | read-only | The maximum call duration of all outbound ISDN calls made from this port, since the last statistics reset. |
| STR friPStatsTxAvgCallDuration | 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.17 | DisplayString | read-only | The average call duration of all outbound ISDN calls made from this port, since the last statistics reset. |
| INT friPStatsSignalingState | 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.18 | INTEGER | read-only | ISDN call signaling state. The possible values are: idle - No ISDN call present. ringing - Pending outgoing ISDN call request. connected - ISDN call is connected. congested - Congested mode. disabled - Virtual Port is disabled. dChannelDown - D-channel is down. disabledDChannelDown - Disabled and D-channel is down. disconnecting - Pending ISDN call disconnection. na - Value not available. |
| cdx6500PSTStationProtocolGroup | 1.3.6.1.4.1.449.2.1.3.1.3 | |||
| cdx6500SPSTFRISStatsTable | 1.3.6.1.4.1.449.2.1.3.1.3.10 | |||
| friSGenStatsTable | 1.3.6.1.4.1.449.2.1.3.1.3.10.1 | not-accessible | This table contains FRI Station Statistics parameters. | |
| cdx6500friSGenStatsEntry | 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1 | not-accessible | Entries in the FRI Station Statistics Table. | |
| INT friSGenStatsPortNumber | 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.1 | INTEGER | read-only | The FRI port number corresponding to this station. |
| INT friSGenStatsStnNumber | 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.2 | INTEGER | read-only | The number of the FRI Station. |
| INT friSStatsStnType | 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.3 | INTEGER | read-only | annex G - Annex G station type. bypass - bypass station type. voice - voice station type. |
| STR friSStatsStnStatus | 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.4 | DisplayString | read-only | Status of the station. |
| INT friSStatsDLCI | 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.5 | INTEGER | read-only | Data Link Connection Identifier is the unique identifier for the station on the FRI port and must match the DLCI configured on the Frame Relay networking node. The DLCI is 0 in Auto-Learning mode. |
| STR friSStatsStnState | 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.6 | DisplayString | read-only | Specifies the state of the station : unused - station is unconfigured/disabled uncontrolled - station is not controlled. controlled - station is controlled, congestion detected. |
| INT friSStatsConfiguredCIR | 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.7 | INTEGER | read-only | Committed Information Rate in bits per second : Value of this parameter is 0 for Bypass stations (not available). |
| INT friSStatsAllowedInfoRate | 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.8 | INTEGER | read-only | Allowed information rate is the link speed if uncongested, 0 if unused and the current desired information rate if congested. Value of this parameter is also 0 for Bypass stations (not available). |
| INT friSStatsImpCongDetect | 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.9 | INTEGER | read-only | Number of times implicit congestion procedures have been invoked.Value of this parameter is 0 for Bypass stations (not available). |
| INT friSStatsExpCongDetect | 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.10 | INTEGER | read-only | Number of times explicit congestion procedures have been invoked. |
| INT friSStatsLMIFlowCntrl | 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.11 | INTEGER | read-only | This indicates the flow status, whether OFF or ON. na - Value not available. |
| INT friSStatsMaxSVCCount | 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.12 | INTEGER | read-only | Maximum number of SVCs available in the network. Value of this parameter is 0 for Bypass stations (not available) |
| INT friSStatsCurrSVCCount | 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.13 | INTEGER | read-only | Number of SVCs currently in use. Value of this parameter is 0 for Bypass stations (not available) |
| INT friSStatsMaxPVCCount | 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.14 | INTEGER | read-only | Maximum number of async pvc channels. Value of this parameter is 0 for Bypass stations (not available) |
| INT friSStatsCurrPVCCount | 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.15 | INTEGER | read-only | Current number of async pvc channels. Value of this parameter is 0 for Bypass stations (not available) |
| STR friSStatsLastStatsReset | 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.16 | DisplayString | read-only | This indicates the time stamp of the last statistics reset. |
| STR friSStatsFrameSegState | 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.17 | DisplayString | read-only | State of the Frame segmenter receiver. |
| INT friSStatsFrameSegSyncLost | 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.18 | INTEGER | read-only | Total number of segments lost by Frame Segmenter Receiver. |
| STR friSStatsPVCState | 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.19 | DisplayString | read-only | Current state of the PVC. Value of this parameter is not available for stations other than Bypass Stations. |
| INT friSStatsVoiceCongDetect | 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.20 | INTEGER | read-only | Number of times voice congestion procedures have been invoked. Value of this parameter is 0 (Not Available) for Bypass stations. |
| INT friSStatsMaxVSVCCount | 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.21 | INTEGER | read-only | Maximum number of Voice SVCs available in the network. Value of this parameter is 0 for Bypass stations (not available) |
| INT friSStatsCurrVSVCCount | 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.22 | INTEGER | read-only | Number of Voice SVCs currently in use. Value of this parameter is 0 for Bypass stations (not available) |
| friSDataSummaryStatsTable | 1.3.6.1.4.1.449.2.1.3.1.3.10.2 | not-accessible | This table contains FRI Station Data Summary Statistics parameters. | |
| cdx6500friSDataSummaryStatsEntry | 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1 | not-accessible | Entries in the FRI Station Data Summary Statistics Table. | |
| INT friSDataSummStatsPortNumber | 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.1 | INTEGER | read-only | The FRI port number corresponding to this station. |
| INT friSDataSummStatsStnNumber | 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.2 | INTEGER | read-only | The number of the FRI station. |
| CTR friSStatsCharInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.3 | Counter | read-only | Number of characters received since last node boot or statistics reset. |
| CTR friSStatsCharOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.4 | Counter | read-only | Number of characters transmitted since last node boot or statistics reset. |
| INT friSStatsCharInPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.5 | INTEGER | read-only | Average number of characters received per second. |
| INT friSStatsCharOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.6 | INTEGER | read-only | Average number of characters transmitted per second. |
| CTR friSStatsPktInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.7 | Counter | read-only | Number of packets received since last node boot or statistics reset. Value of this parameter is 0 for Bypass stations (not available) |
| CTR friSStatsPktOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.8 | Counter | read-only | Number of packets transmitted since last node boot or statistics reset. Value of this parameter is 0 for Bypass stations (not available) |
| INT friSStatsPktInPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.9 | INTEGER | read-only | Average number of packets received per second. Value of this parameter is 0 for Bypass stations (not available) |
| INT friSStatsPktOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.10 | INTEGER | read-only | Average number of packets transmitted per second. Value of this parameter is 0 for Bypass stations (not available) |
| CTR friSStatsFrameInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.11 | Counter | read-only | Number of frames transmitted since last node boot or statistics reset. |
| CTR friSStatsFrameOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.12 | Counter | read-only | Number of frames transmitted since last node boot or statistics reset. |
| INT friSStatsFrameInPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.13 | INTEGER | read-only | Average number of frames received per second. |
| INT friSStatsFrameOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.14 | INTEGER | read-only | Average number of frames transmitted per second. |
| INT friSStatsUtilIn | 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.15 | INTEGER | read-only | Indicates the quantity of user bytes received on the link expressed as a percentage of the maximum number of bytes that could have been received. |
| INT friSStatsUtilOut | 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.16 | INTEGER | read-only | Indicates the quantity of user bytes sent down the link expressed as a percentage of the maximum number of bytes that could have been sent. |
| INT friSStatsNumPktsQueued | 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.17 | INTEGER | read-only | Current number of packets buffered since last node boot or statistics reset. Value of this parameter is 0 for Bypass stations (not available) |
| INT friSStatsPktsDiscardIn | 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.18 | INTEGER | read-only | Number of incoming packets discarded. Value of this parameter is only available for Bypass stations, 0 is returned otherwise. |
| INT friSStatsPktsDiscardOut | 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.19 | INTEGER | read-only | Number of outgoing packets discarded. Value of this parameter is only available for Bypass stations, 0 is returned otherwise. |
| INT friSStatsPktsQueuedIn | 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.20 | INTEGER | read-only | Current number of Incoming packets buffered since last node boot or statistics reset of a Bypass station. Value of this parameter is only available for Bypass stations, 0 is returned otherwise. |
| INT friSStatsPktsQueuedOut | 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.21 | INTEGER | read-only | Current number of Outgoing packets buffered since last node boot or statistics reset of a Bypass station. Value of this parameter is only available for Bypass stations, 0 is returned otherwise. |
| friSVoiceSummaryStatsTable | 1.3.6.1.4.1.449.2.1.3.1.3.10.3 | not-accessible | This table contains FRI Station Voice Summary Statistics parameters. | |
| cdx6500friSVoiceSummaryStatsEntry | 1.3.6.1.4.1.449.2.1.3.1.3.10.3.1 | not-accessible | Entries in the FRI Station Voice Summary Statistics Table. NOTE : Value of all objects in this table will be 0 for Bypass stations (not available). | |
| INT friSVoiceSummStatsPortNumber | 1.3.6.1.4.1.449.2.1.3.1.3.10.3.1.1 | INTEGER | read-only | The FRI port number corresponding to this station. |
| INT friSVoiceSummStatsStnNumber | 1.3.6.1.4.1.449.2.1.3.1.3.10.3.1.2 | INTEGER | read-only | The number of the FRI station. |
| CTR friSStatsVoiceCharInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.3.1.3 | Counter | read-only | Total number of voice characters received. |
| CTR friSStatsVoiceCharOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.3.1.4 | Counter | read-only | Total number of voice characters transmitted. |
| INT friSStatsVoiceCharInPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.10.3.1.5 | INTEGER | read-only | Number of voice characters received per second. |
| INT friSStatsVoiceCharOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.10.3.1.6 | INTEGER | read-only | Number of voice characters transmitted per second. |
| CTR friSStatsVoicePktInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.3.1.7 | Counter | read-only | Total number of voice packets received. |
| CTR friSStatsVoicePktOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.3.1.8 | Counter | read-only | Total number of voice packets transmitted. |
| INT friSStatsVoicePktInPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.10.3.1.9 | INTEGER | read-only | Number of voice packets received per second. |
| INT friSStatsVoicePktOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.10.3.1.10 | INTEGER | read-only | Number of voice packets transmitted per second. |
| friSFrameSummaryStatsTable | 1.3.6.1.4.1.449.2.1.3.1.3.10.4 | not-accessible | This table contains FRI Station Frame Summary Statistics parameters. | |
| cdx6500friSFrameSummaryStatsEntry | 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1 | not-accessible | Entries in the FRI Station Frame Summary Statistics Table. NOTE : Value of all objects in this table will be 0 for Bypass stations (not available) | |
| INT friSFrameSummStatsPortNumber | 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.1 | INTEGER | read-only | The FRI port number corresponding to this station. |
| INT friSFrameSummStatsStnNumber | 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.2 | INTEGER | read-only | The number of the FRI station. |
| CTR friSStatsInfoFramesInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.3 | Counter | read-only | Information Frames received since last node boot or statistics reset. |
| CTR friSStatsInfoFramesOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.4 | Counter | read-only | Information Frames transmitted since last node boot or statistics reset. |
| CTR friSStatsRRFramesInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.5 | Counter | read-only | Number of RR Frames received since last node boot or statistics reset. |
| CTR friSStatsRRFramesOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.6 | Counter | read-only | Number of RR Frames transmitted since last node boot or statistics reset. |
| CTR friSStatsRNRFramesInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.7 | Counter | read-only | Number of RNR frames received since last node boot or statistics reset. |
| CTR friSStatsRNRFramesOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.8 | Counter | read-only | Number of RNR frames transmitted since last node boot or statistics reset. |
| CTR friSStatsREJFramesInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.9 | Counter | read-only | Number of REJ frames received since last node boot or statistics reset. |
| CTR friSStatsREJFramesOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.10 | Counter | read-only | Number of REJ frames transmitted since last node boot or statistics reset. |
| CTR friSStatsSABMFramesInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.11 | Counter | read-only | Number of SABM frames received since last node boot or statistics reset. |
| CTR friSStatsSABMFramesOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.12 | Counter | read-only | Number of SABM frames transmitted since last node boot or statistics reset. |
| CTR friSStatsDISCFramesInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.13 | Counter | read-only | Number of DISC frames received since last node boot or statistics reset. |
| CTR friSStatsDISCFramesOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.14 | Counter | read-only | Number of DISC frames transmitted since last node boot or statistics reset. |
| CTR friSStatsDMFramesInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.15 | Counter | read-only | Number of DM frames received since last node boot or statistics reset. |
| CTR friSStatsDMFramesOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.16 | Counter | read-only | Number of DM frames transmitted since last node boot or statistics reset. |
| CTR friSStatsUAFramesInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.17 | Counter | read-only | Number of UA frames received since last node boot or statistics reset. |
| CTR friSStatsUAFramesOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.18 | Counter | read-only | Number of UA frames transmitted since last node boot or statistics reset. |
| CTR friSStatsFRMRFramesInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.19 | Counter | read-only | Number of FRMR frames received since last node boot or statistics reset. |
| CTR friSStatsFRMRFramesOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.20 | Counter | read-only | Number of FRMR frames transmitted since last node boot or statistics reset. |
| friSPacketSummaryStatsTable | 1.3.6.1.4.1.449.2.1.3.1.3.10.5 | not-accessible | This table contains FRI Station Packet Summary Statistics parameters. | |
| cdx6500friSPacketSummaryStatsEntry | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1 | not-accessible | Entries in the FRI Station Packet Summary Statistics Table. NOTE : Value of all objects in this table will be 0 for Bypass stations (not available) | |
| INT friSPktSummStatsPortNumber | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.1 | INTEGER | read-only | The FRI port number corresponding to this station. |
| INT friSPktSummStatsStnNumber | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.2 | INTEGER | read-only | The number of the FRI station. |
| CTR friSStatsDataPktInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.3 | Counter | read-only | Number of Data packets received since last node boot or statistics reset. |
| CTR friSStatsDataPktOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.4 | Counter | read-only | Number of Data packets transmitted since last node boot or statistics reset. |
| CTR friSStatsRRPktInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.5 | Counter | read-only | Number of RR packets received since last node boot or statistics reset. |
| CTR friSStatsRRPktOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.6 | Counter | read-only | Number of RR packets transmitted since last node boot or statistics reset. |
| CTR friSStatsRNRPktInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.7 | Counter | read-only | Number of RNR packets received since last node boot or statistics reset. |
| CTR friSStatsRNRPktOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.8 | Counter | read-only | Number of RNR packets transmitted since last node boot or statistics reset. |
| CTR friSStatsREJPktInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.9 | Counter | read-only | Number of REJ packets received since last node boot or statistics reset. |
| CTR friSStatsREJPktOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.10 | Counter | read-only | Number of REJ packets transmitted since last node boot or statistics reset. |
| CTR friSStatsCallReqPktInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.11 | Counter | read-only | Number of call request packets received since last node boot or statistics reset. |
| CTR friSStatsCallReqPktOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.12 | Counter | read-only | Number of call request packets transmitted since last node boot or statistics reset. |
| CTR friSStatsCallAccPktInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.13 | Counter | read-only | Number of call accept packets received since last node boot or statistics reset. |
| CTR friSStatsCallAccPktOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.14 | Counter | read-only | Number of call accept packets transmitted since last node boot or statistics reset. |
| CTR friSStatsClrReqPktInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.15 | Counter | read-only | Number of clear request packets received since last node boot or statistics reset. |
| CTR friSStatsClrReqPktOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.16 | Counter | read-only | Number of clear request packets transmitted since last node boot or statistics reset. |
| CTR friSStatsClrConfPktInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.17 | Counter | read-only | Number of clear confirm packets received since last node boot or statistics reset. |
| CTR friSStatsClrConfPktOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.18 | Counter | read-only | Number of clear confirm packets transmitted since last node boot or statistics reset. |
| CTR friSStatsIntrReqPktInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.19 | Counter | read-only | Number of interrupt request packets received since last node boot or statistics reset. |
| CTR friSStatsIntrReqPktOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.20 | Counter | read-only | Number of interrupt request packets transmitted since last node boot or statistics reset. |
| CTR friSStatsIntrConfPktInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.21 | Counter | read-only | Number of interrupt confirm packets received since last node boot or statistics reset. |
| CTR friSStatsIntrConfPktOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.22 | Counter | read-only | Number of interrupt confirm packets transmitted since last node boot or statistics reset. |
| CTR friSStatsResetReqPktInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.23 | Counter | read-only | Number of reset request packets received since last node boot or statistics reset. |
| CTR friSStatsResetReqPktOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.24 | Counter | read-only | Number of reset request packets transmitted since last node boot or statistics reset. |
| CTR friSStatsResetConfPktInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.25 | Counter | read-only | Number of reset confirm packets received since last node boot or statistics reset. |
| CTR friSStatsResetConfPktOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.26 | Counter | read-only | Number of reset confirm packets transmitted since last node boot or statistics reset. |
| CTR friSStatsRestartReqPktInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.27 | Counter | read-only | Number of restart request packets received since last node boot or statistics reset. |
| CTR friSStatsRestartReqPktOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.28 | Counter | read-only | Number of restart request packets transmitted since last node boot or statistics reset. |
| CTR friSStatsRestartConfPktInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.29 | Counter | read-only | Number of restart confirm packets received since last node boot or statistics reset. |
| CTR friSStatsRestartConfPktOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.30 | Counter | read-only | Number of restart confirm packets transmitted since last node boot or statistics reset. |
| friSFRISummaryStatsTable | 1.3.6.1.4.1.449.2.1.3.1.3.10.6 | not-accessible | This table contains FRI Station FRI Summary Statistics parameters. | |
| cdx6500friSFRISummaryStatsEntry | 1.3.6.1.4.1.449.2.1.3.1.3.10.6.1 | not-accessible | Entries in the FRI Station FRI Summary Statistics Table. NOTE : Value of all objects in this table are valid only for Bypass stations; 0 will be returned otherwise. | |
| INT friSFRISummStatsPortNumber | 1.3.6.1.4.1.449.2.1.3.1.3.10.6.1.1 | INTEGER | read-only | The FRI port number corresponding to this station. |
| INT friSFRISummStatsStnNumber | 1.3.6.1.4.1.449.2.1.3.1.3.10.6.1.2 | INTEGER | read-only | The number of the FRI station. |
| CTR friSStatsFECNInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.6.1.3 | Counter | read-only | Number of Forward Explicit Congestion Notification (FECN) packets received since last node boot or statistics reset. |
| CTR friSStatsFECNOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.6.1.4 | Counter | read-only | Number of Forward Explicit Congestion Notification (FECN) packets transmitted since last node boot or statistics reset. |
| CTR friSStatsBECNInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.6.1.5 | Counter | read-only | Number of Backward Explicit Congestion Notification (BECN) packets received since last node boot or statistics reset. |
| CTR friSStatsBECNOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.6.1.6 | Counter | read-only | Number of Backward Explicit Congestion Notification (BECN) packets transmitted since last node boot or statistics reset. |
| CTR friSStatsDEInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.6.1.7 | Counter | read-only | Number of Discard Eligibility (DE) packets received since last node boot or statistics reset. |
| CTR friSStatsDEOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.10.6.1.8 | Counter | read-only | Number of Discard Eligibility (DE) packets transmitted since last node boot or statistics reset. |
| cdx6500Controls | 1.3.6.1.4.1.449.2.1.4 | |||
| cdx6500ContFRITable | 1.3.6.1.4.1.449.2.1.4.14 | |||
| cdx6500FRIPContTable | 1.3.6.1.4.1.449.2.1.4.14.1 | not-accessible | Control parameters for FRI ports. | |
| cdx6500FRIPContEntry | 1.3.6.1.4.1.449.2.1.4.14.1.1 | not-accessible | Each control applies to a single FRI port. | |
| INT friPContPortNumber | 1.3.6.1.4.1.449.2.1.4.14.1.1.1 | INTEGER | not-accessible | Port number of the FRI port. |
| INT friPContPortControl | 1.3.6.1.4.1.449.2.1.4.14.1.1.2 | INTEGER | write-only | Control operations for the specified FRI port. boot - Boots the FRI port enable - Enables the FRI port disable - Disables the FRI port resetstats - Resets the FRI port statistics. |
| cdx6500FRISContTable | 1.3.6.1.4.1.449.2.1.4.14.2 | not-accessible | Control parameters for FRI stations. | |
| cdx6500FRISContEntry | 1.3.6.1.4.1.449.2.1.4.14.2.1 | not-accessible | Each control applies to a single FRI station. | |
| INT friSContPortNumber | 1.3.6.1.4.1.449.2.1.4.14.2.1.1 | INTEGER | not-accessible | The FRI port number corresponding to this station. |
| INT friSContStnNumber | 1.3.6.1.4.1.449.2.1.4.14.2.1.2 | INTEGER | not-accessible | FRI station number. |
| INT friSContStnControl | 1.3.6.1.4.1.449.2.1.4.14.2.1.3 | INTEGER | write-only | Control operations for the specified FRI station. boot - Boots the FRI station enable - Enables the FRI station disable - Disables the FRI station resetstats - Resets the FRI station statistics. |
RFC description
Frame Relay DTE port configuration and statistics management for Codex CDX6500 networking equipment.
Start monitoring Codex CDX-6500 Frame Relay interface/WAN access device with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.