FRI-OPT-MIB :: friSCfgRetryInterval

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › FRI-OPT-MIB › friSCfgRetryInterval

friSCfgRetryInterval

Module: FRI-OPT-MIB

OID (symbolic): FRI-OPT-MIB::friSCfgRetryInterval

OID (numeric): 1.3.6.1.4.1.449.2.1.2.1.3.9.1.39

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This is the time interval between call attempts, in seconds, that a station configured to initiate an SVC call will use. If a call attempt fails, either because there was no response to the SETUP message or the response was a RELEASE, the station will wait this amount of time before sending the next SETUP message.

What is friSCfgRetryInterval?

Seconds (1 to 255) an SVC-originating station waits between call attempts after a SETUP gets no answer or a RELEASE. For example, 30 retries every half minute.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.3.9.1.39
snmpwalk -v2c -c public <target> FRI-OPT-MIB::friSCfgRetryInterval

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.3.9.1.39.1
snmpget -v2c -c public <target> FRI-OPT-MIB::friSCfgRetryInterval.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.449.2.1.2.1.3.9.1.39.1 i <value>

Start monitoring Codex CDX-6500 Frame Relay interface/WAN access device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FRI-OPT-MIB::friSCfgRetryInterval OID value, configure state conditions and alerts, and monitor any Codex CDX-6500 Frame Relay interface/WAN access device from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.449codexALC-OPT-MIB
1.3.6.1.4.1.449.2cdxProductSpecificALC-OPT-MIB
1.3.6.1.4.1.449.2.1cdx6500ALC-OPT-MIB
1.3.6.1.4.1.449.2.1.2cdx6500ConfigurationALC-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1cdx6500CfgProtocolGroupALC-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1.3cdx6500PCTStationProtocolGroupATM-OPT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.449.2.1.2.1.3.9cdx6500SPCTFRIStationTableFRI-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1.3.9.1cdx6500SPCTFRIStationEntryFRI-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1.3.9.1.39friSCfgRetryIntervalFRI-OPT-MIB