EDB-snmp

All MIBs › EDB-snmp

Category: Domain: Storage

Description: EnterpriseDB SNMP MIB for monitoring PostgreSQL-based database instances including query performance and session statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is EDB-snmp?

EDB-snmp is EnterpriseDB's SNMP MIB used alongside its PostgreSQL-based database tooling. Based on the objects actually defined in the module, it exposes trap-destination/notification-routing configuration -- registered receiver address, community string, SNMP version, and per-entry state -- rather than deep query-level PostgreSQL internals directly. Its practical monitoring value is confirming the health of the alerting pipeline itself: which management stations are registered to receive traps, at what SNMP version/community, and whether learning/aging of these registrations is enabled, which is how an operator ultimately learns about database-level events surfaced by the underlying EDB agent. No explicit dependency on other MIBs is stated in the available module description. It is typically deployed on EnterpriseDB PostgreSQL servers where the EDB SNMP agent forwards database health traps to one or more registered NMS trap receivers. Engineers can download the EDB-snmp file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in EDB-snmp. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Fibronics International network equipment (SNMP trap-destination config) — Enterprise OID 22 resolves to Fibronics International (a 1980s-era Israeli LAN/fiber-optic networking vendor), not EnterpriseDB (the PostgreSQL company, founded 2004 — long after OID 22 was assigned) as previously guessed from the 'EDB' filename.

Monitoring Examples

An administrator would poll rTrapAddrTbl/rTrapAddrEntry indexed by rTrapAddrAddr to confirm rTrapAddrComm and rTrapAddrVer are correctly set for each registered trap receiver, and check rTrapAddrState/rTrapAddrFlag/rTrapAddrAge to see whether a receiver entry is active or has aged out of the table. The related pTrapAddrTbl and rTrapLearning/rTrapAging objects would be checked to verify whether new trap-destination entries are still being learned/refreshed, which matters for ensuring database alert traps keep reaching the intended monitoring station.

What Can Be Monitored

registered trap-receiver addresses
trap community string per receiver
SNMP version per receiver
trap receiver active state
trap entry aging/learning status

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
NetworkAddress
TimeTicks
internet
mgmt

From RFC1213-MIB

PhysAddress

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
enterprises	1.3.6.1.4.1
fibronics	1.3.6.1.4.1.22
fm800	1.3.6.1.4.1.22.51
fmdiag	1.3.6.1.4.1.22.51.5
OCT fmDiagConfig	1.3.6.1.4.1.22.51.5.1	OCTET STRING	read-only	Version of the station. The version includes station type, hardware version and software version. The string can include CR and LF
INT fmDiagDebug	1.3.6.1.4.1.22.51.5.4	INTEGER	read-write	This object is for factory use only. Users must not write into this variable or improper operation can occur.
fmDiagFaultEntry	1.3.6.1.4.1.22.51.5.3.1		not-accessible
INT fmDiagFaultIndex	1.3.6.1.4.1.22.51.5.3.1.1	INTEGER	read-only	The fault index in the fault table
STR fmDiagFaultReport	1.3.6.1.4.1.22.51.5.3.1.2	DisplayString	read-only	Get the faults detected by the agent
fmDiagFaultTable	1.3.6.1.4.1.22.51.5.3		not-accessible	Table of fault reports from the agent
NTF fmDiagGenericTrap	1.3.6.1.4.1.22.51.0.30			Generic Trap information
STR fmDiagTrapInfo	1.3.6.1.4.1.22.51.5.2	DisplayString	read-only	Used for generic traps. The first word is the trap code. The rest of the string is the extra information. Contains CR and LF char.
fmlu	1.3.6.1.4.1.22.51.3
NTF fmLUChangeConfig	1.3.6.1.4.1.22.51.0.20			Issues when a change in the LU configuration is done
OCT fmLUDescr	1.3.6.1.4.1.22.51.3.2	OCTET STRING	read-only	Ascii string. Description of the logic unit
INT fmLUID	1.3.6.1.4.1.22.51.3.1	INTEGER	read-write	Logic unit ID
INT fmLULinkSelect	1.3.6.1.4.1.22.51.3.4	INTEGER	read-write	Setup LU link.
NTF fmLULLBOff	1.3.6.1.4.1.22.51.0.16			When the logic unit exits LLB mode
NTF fmLULLBOn	1.3.6.1.4.1.22.51.0.15			When the logic unit enters LLB mode
INT fmLULoopBackClr	1.3.6.1.4.1.22.51.3.6	INTEGER	read-write	Upon writing, clear LLB command. When reading the instance of this object the value has no meaning.
INT fmLULoopBackSet	1.3.6.1.4.1.22.51.3.5	INTEGER	read-write	Upon writing, performs LLB command. When reading the instance of this object the value has no meaning.
NTF fmLUOutOfSync	1.3.6.1.4.1.22.51.0.7			Issued when the Logic unit goes out of synchronization
NTF fmLUPassToMain	1.3.6.1.4.1.22.51.0.9			Issues as soon as the logic unit pass to main link
NTF fmLUPassToSecond	1.3.6.1.4.1.22.51.0.10			Issues as soon as the logic unit pass to second link
NTF fmLUPrimaryLinkFail	1.3.6.1.4.1.22.51.0.11			When primary link of the logic unit fails this trap is issued
NTF fmLUPrimaryLinkOK	1.3.6.1.4.1.22.51.0.12			When primary link of the logic unit fails this trap is issued
NTF fmLUReturnToSync	1.3.6.1.4.1.22.51.0.8			Issues as soon as the logic unit returns to synchronization
NTF fmLUSecondLinkFail	1.3.6.1.4.1.22.51.0.13			When second link of the logic unit fails this trap is issued
NTF fmLUSecondLinkOK	1.3.6.1.4.1.22.51.0.14			When second link of the logic unit fails this trap is issued
OCT fmLUStatus	1.3.6.1.4.1.22.51.3.3	OCTET STRING	read-only	One byte of LU status
INT fmLUTrapMask	1.3.6.1.4.1.22.51.3.7	INTEGER	read-write	When the value is 1, no more traps from the LU are sent, until next reset. (temporary mask)
NTF fmPowerSupplyChangeConfig	1.3.6.1.4.1.22.51.0.4			Issued when a change in the configuration of the power supply is done
NTF fmPowerSupplyFail	1.3.6.1.4.1.22.51.0.1			This trap message is generated as soon as one of the power supply has failed
NTF fmPrimaryPowerSupplyOK	1.3.6.1.4.1.22.51.0.2			This trap is issued when primary power supply return to work
NTF fmSecondPowerSupplyOK	1.3.6.1.4.1.22.51.0.3			This trap is issued when second power supply return to work
fmslot	1.3.6.1.4.1.22.51.2
NTF fmSlotChangeConfig	1.3.6.1.4.1.22.51.0.26			Issued when the system detects changes in its slots configuration
OCT fmSlotDescr	1.3.6.1.4.1.22.51.2.2.1.3	OCTET STRING	read-only	Ascii string. Description of the card
fmSlotEntry	1.3.6.1.4.1.22.51.2.2.1		not-accessible
INT fmSlotExpCode	1.3.6.1.4.1.22.51.2.2.1.9	INTEGER	read-write	Perform an expanded command on the slot. For expanded codes, see specific card user manual. When reading the instance of this object the value has no meaning. Extended command codes for NDS cards ------------------------------------ 1. CC892.303 (Ethernet) Code (Dec/Hex) Command ----------------------------------- 02/02 Detach Port 13 03/03 Attach Port 13 04/04 Detach Port 01 05/05 Attach Port 01 06/06 Detach Port 02 07/07 Attach Port 02 08/08 Detach Port 03 09/09 Attach Port 03 10/0A Detach Port 04 11/0B Attach Port 04 12/0C Detach Port 05 13/0D Attach Port 05 14/0E Detach Port 06 15/0F Attach Port 06 16/10 Detach Port 07 17/11 Attach Port 07 18/12 Detach Port 08 19/13 Attach Port 08 20/14 Detach Port 09 21/15 Attach Port 09 22/16 Detach Port 10 23/17 Attach Port 10 24/18 Detach Port 11 25/19 Attach Port 11 26/1A Detach Port 12 27/1B Attach Port 12 28/1C Detach All Ports 29/1D Attach All Ports 30/1E Reset Card 31/1F Link Select ====================================================== 2. CC892.308 (Ethernet) Code (Dec/Hex) Command ----------------------------------- 02/02 Detach Port 01 03/03 Attach Port 01 04/04 Detach Port 02 05/05 Attach Port 02 06/06 Detach Port 03 07/07 Attach Port 03 08/08 Detach Port 04 09/09 Attach Port 04 10/0A Detach Port 05 11/0B Attach Port 05 12/0C Detach Port 06 13/0D Attach Port 06 14/0E Detach Port 07 15/0F Attach Port 07 16/10 Detach Port 08 17/11 Attach Port 08 ... 28/1C Detach All Ports 29/1D Attach All Ports 30/1E Reset Card 31/1F Link Select ================================================ 3. CC892.322 (Token-ring) Module 323 ---------- Code (Dec/Hex) Command ----------------------------------- 02/02 Detach Port 01 03/03 Attach Port 01 04/04 Detach Port 02 05/05 Attach Port 02 06/06 Detach Port 03 07/07 Attach Port 03 08/08 Detach Port 04 09/09 Attach Port 04 10/0A Detach Port 05 11/0B Attach Port 05 12/0C Detach Port 06 13/0D Attach Port 06 18/12 Detach Port 07 19/13 Attach Port 07 20/14 Detach Port 08 21/15 Attach Port 08 22/16 Detach Port 19 23/17 Attach Port 19 24/18 Detach Port 10 25/19 Attach Port 10 26/1A Detach Port 11 27/1B Attach Port 11 28/1C Detach Port 12 29/1D Attach Port 12 30/1E Reset Card 34/22 Detach Port 13 35/23 Attach Port 13 36/24 Detach Port 14 37/25 Attach Port 14 38/26 Detach Port 15 39/27 Attach Port 15 40/28 Detach Port 16 41/29 Attach Port 16 42/2A Detach Port 17 43/2B Attach Port 17 44/2C Detach Port 18 45/2D Attach Port 18 50/32 Detach Port 19 51/33 Attach Port 19 52/34 Detach Port 20 53/35 Attach Port 20 54/36 Detach Port 21 55/37 Attach Port 21 56/38 Detach Port 22 57/39 Attach Port 22 58/3A Detach Port 23 59/3B Attach Port 23 60/3C Detach Port 24 61/3D Attach Port 24 77/4D Detach All Ports 79/4F Attach All Ports ======================================================== Module 325 ---------- 30/1E Reset Card 80/50 Detach Local Port 1 (channel 1) 81/51 Attach Local Port 1 (channel 1) 82/52 Detach Local Port 2 (channel 1) 83/53 Attach Local Port 2 (channel 1) 88/58 Detach Local Port 1 (channel 3) 89/59 Attach Local Port 1 (channel 3) 90/5A Detach Local Port 2 (channel 3) 91/5B Attach Local Port 2 (channel 3) 77/4D Detach All Ports 79/4F Attach All Ports 4. CC892.427 (Voice) Code (Dec/Hex) Command ----------------------------------- 04/04 Loopback OFF on Port 1 05/05 Loopback ON on Port 1 06/06 Loopback OFF on Port 2 07/07 Loopback ON on Port 2 08/08 Loopback OFF on Port 3 09/09 Loopback ON on Port 3 10/0A Loopback OFF on Port 4 11/0B Loopback ON on Port 4 12/0C Loopback OFF on Port 5 13/0D Loopback ON on Port 5 14/0E Loopback OFF on Port 6 15/0F Loopback ON on Port 6 16/10 Loopback OFF on Port 7 17/11 Loopback ON on Port 7 18/12 Loopback OFF on Port 8 19/13 Loopback ON on Port 8 20/14 Loopback OFF on Port 9 21/15 Loopback ON on Port 9 22/16 Loopback OFF on Port 10 23/17 Loopback ON on Port 10 24/18 Loopback OFF on Port 11 25/19 Loopback ON on Port 11 26/1A Loopback OFF on Port 12 27/1B Loopback ON on Port 12 28/1C Loopback OFF on Port 13 29/1D Loopback ON on Port 13 30/1E Loopback OFF on Port 14 31/1F Loopback ON on Port 14 32/20 Loopback OFF on Port 15 33/21 Loopback ON on Port 15 34/22 Loopback OFF on Port 16 35/23 Loopback ON on Port 16 37/25 Loopback ALL on Ports 1-8 39/27 Loopback ALL on Ports 9-16 40/28 Alternate Mode on Channel Module #1 41/29 Normal Mode on Channel Module #1 42/2A Alternate Mode on Channel Module #2 43/2B Normal Mode on Channel Module #2 45/2D Configuration Load Module #1 47/2F Configuration Load Module #2 ======================================================
INT fmSlotID	1.3.6.1.4.1.22.51.2.2.1.2	INTEGER	read-write	ID of the card in the slot
INT fmSlotIndex	1.3.6.1.4.1.22.51.2.2.1.1	INTEGER	read-only	Slot Number
OCT fmSlotInfo	1.3.6.1.4.1.22.51.2.2.1.4	OCTET STRING	read-write	User general info for the slot. Can be the use of that slot, its location etc...
IP fmSlotIpAddr	1.3.6.1.4.1.22.51.2.2.1.12	IpAddress	read-only	IP address of a channel card. This is object is available only for channel cards which have their own IP addresses (e.g., LC303/129)
INT fmSlotMasterClear	1.3.6.1.4.1.22.51.2.1	INTEGER	read-write	Upon writing, performs a master clear command on all the slots. When reading the instance of this object the value has no meaning.
OCT fmSlotPrevStatus	1.3.6.1.4.1.22.51.2.2.1.6	OCTET STRING	read-only	8 bytes. Previous 60 status bits of the card. This object id is used mainly for traps (see Card Trap)
INT fmSlotRLBClear	1.3.6.1.4.1.22.51.2.2.1.8	INTEGER	read-write	Argument: 1 - 4. Perform a RLB clear operation on the channel passed as argument. When reading the instance of this object the value has no meaning.
INT fmSlotRLBSet	1.3.6.1.4.1.22.51.2.2.1.7	INTEGER	read-write	Argument: 1 - 4. Perform a RLB set operation on the channel passed as argument. When reading the instance of this object the value has no meaning.
OCT fmSlotStatus	1.3.6.1.4.1.22.51.2.2.1.5	OCTET STRING	read-only	8 bytes. 60 status bits of the card. For more information about the meaning of the status, read the specific user manual of each card. The channel leds are encoded into 2 bytes.
fmSlotTable	1.3.6.1.4.1.22.51.2.2		not-accessible
NTF fmSlotTrap	1.3.6.1.4.1.22.51.0.25			Generated when a significant status has changed in a slot. By xoring the 2 statuses, the NMS can identify the cause of the trap.
INT fmSlotTrapMask	1.3.6.1.4.1.22.51.2.2.1.10	INTEGER	read-write	When the value is 1, no more traps from that slot are sent, until next reset. (temporary mask)
fmsystem	1.3.6.1.4.1.22.51.1
OCT fmSystemBootFile	1.3.6.1.4.1.22.51.1.1.11	OCTET STRING	read-only	Path and file name that is sent as a TFTP request
INT fmSystemBootMode	1.3.6.1.4.1.22.51.1.1.12	INTEGER	read-only	Method for booting
INT fmSystemDownLoad	1.3.6.1.4.1.22.51.1.1.13	INTEGER	read-write	Downloading the EDB. When reading the instance of this object the value has no meaning.
IP fmSystemFileServer	1.3.6.1.4.1.22.51.1.1.10	IpAddress	read-write	IP address to which a TFTP for boot is sent.
IP fmSystemIpAddr	1.3.6.1.4.1.22.51.1.1.7	IpAddress	read-only	IP address of the agent
IP fmSystemIPDefGway	1.3.6.1.4.1.22.51.1.1.9	IpAddress	read-only	Default Gateway Address
IP fmSystemIPNetMask	1.3.6.1.4.1.22.51.1.1.8	IpAddress	read-only	IP Network Mask
fmsystemperm	1.3.6.1.4.1.22.51.1.2
INT fmSystemPSAdmin	1.3.6.1.4.1.22.51.1.1.1	INTEGER	read-write	Changes power supply to primary or secondary. When reading the instance of this object the value has no meaning.
INT fmSystemPSCfg	1.3.6.1.4.1.22.51.1.1.3	INTEGER	read-write	Configuration of power supply
INT fmSystemPSOper	1.3.6.1.4.1.22.51.1.1.2	INTEGER	read-only	Which power supply active
INT fmSystemReset	1.3.6.1.4.1.22.51.1.1.4	INTEGER	read-write	Resetting the CARD. When reading the instance of this object the value has no meaning. cold reset is performed with selftest , while warm start is performed without selftest
fmsystemrun	1.3.6.1.4.1.22.51.1.1
INT fmSystemSelfTestLevel	1.3.6.1.4.1.22.51.1.1.5	INTEGER	read-write	Type of self test to be executed upon cold-reset
INT fmSystemSlipBaudRate	1.3.6.1.4.1.22.51.1.1.16	INTEGER	read-only	SLIP Baud rate This is object is available only when slip interface exist
IP fmSystemSlipIpAddr	1.3.6.1.4.1.22.51.1.1.14	IpAddress	read-only	SLIP IP address. This is object is available only when slip interface exist
IP fmSystemSlipIPNetMask	1.3.6.1.4.1.22.51.1.1.15	IpAddress	read-only	SLIP IP Network Mask This is object is available only when slip interface exist
INT fmSystemSlipParity	1.3.6.1.4.1.22.51.1.1.17	INTEGER	read-only	SLIP Parity This is object is available only when slip interface exist
INT fmSystemSlipStopBits	1.3.6.1.4.1.22.51.1.1.18	INTEGER	read-only	SLIP Stop Bits This is object is available only when slip interface exist
OCT fmSystemVersion	1.3.6.1.4.1.22.51.1.1.6	OCTET STRING	read-only	Version of the station. The version includes station type, hardware version and software version. The string can include CR and LF
INT pfmLUTrapMask	1.3.6.1.4.1.22.51.3.8	INTEGER	read-write	When the value is 1, no more traps for the LU will be sent, starting after next reset (permanent mask)
INT pfmSlotTrapMask	1.3.6.1.4.1.22.51.2.2.1.11	INTEGER	read-write	When the value is 1, no more traps for that slot will be sent, starting after next reset (permanent mask)
OCT pfmSystemBootFile	1.3.6.1.4.1.22.51.1.2.11	OCTET STRING	read-write	Path and file name that is sent as a TFTP request
INT pfmSystemBootMode	1.3.6.1.4.1.22.51.1.2.12	INTEGER	read-write	Method for booting
IP pfmSystemFileServer	1.3.6.1.4.1.22.51.1.2.10	IpAddress	read-write	IP address to which a TFTP for boot is sent.
IP pfmSystemIpAddr	1.3.6.1.4.1.22.51.1.2.7	IpAddress	read-write	IP address of the agent
IP pfmSystemIPDefGway	1.3.6.1.4.1.22.51.1.2.9	IpAddress	read-write	Default Gateway Address
IP pfmSystemIPNetMask	1.3.6.1.4.1.22.51.1.2.8	IpAddress	read-write	IP Network Mask
OCT pfmSystemReadCommunity	1.3.6.1.4.1.22.51.1.2.13	OCTET STRING	read-write	Community string for reading When reading the instance of this object the value has no meaning.
INT pfmSystemSlipBaudRate	1.3.6.1.4.1.22.51.1.2.17	INTEGER	read-write	SLIP Baud rate This is object is available only when slip interface exist
IP pfmSystemSlipIpAddr	1.3.6.1.4.1.22.51.1.2.15	IpAddress	read-write	SLIP IP address This is object is available only when slip interface exist
IP pfmSystemSlipIPNetMask	1.3.6.1.4.1.22.51.1.2.16	IpAddress	read-write	SLIP IP Network Mask This is object is available only when slip interface exist
INT pfmSystemSlipParity	1.3.6.1.4.1.22.51.1.2.18	INTEGER	read-write	SLIP Parity This is object is available only when slip interface exist
INT pfmSystemSlipStopBits	1.3.6.1.4.1.22.51.1.2.19	INTEGER	read-write	SLIP Stop Bits This is object is available only when slip interface exist
OCT pfmSystemWriteCommunity	1.3.6.1.4.1.22.51.1.2.14	OCTET STRING	read-write	Community string for writing When reading the instance of this object the value has no meaning.
private	1.3.6.1.4
IP pTrapAddrAddr	1.3.6.1.4.1.22.3.2.1.1.1	IpAddress	read-write	IP address of entity requesting event notification
OCT pTrapAddrComm	1.3.6.1.4.1.22.3.2.1.1.2	OCTET STRING	read-write	Community name the receiving entity will expect. When reading the instance of this object the value has no meaning.
pTrapAddrEntry	1.3.6.1.4.1.22.3.2.1.1		not-accessible
INT pTrapAddrState	1.3.6.1.4.1.22.3.2.1.1.5	INTEGER	read-write	Determines status of this entry
pTrapAddrTbl	1.3.6.1.4.1.22.3.2.1		not-accessible	Table of managers to which traps must be sent. Up to 10 entries in table
OCT pTrapAddrType	1.3.6.1.4.1.22.3.2.1.1.4	OCTET STRING	read-write	Type of event that should be reported to this address, bit 0 - authentication trap bit 1 - other SNMP traps bit 2 - Error Traps bit 3 - Diagnostic Traps bit 4 - Debug Traps bit 5 - all Enterprise Traps other than fmDiagGenericTrap
INT pTrapAddrVer	1.3.6.1.4.1.22.3.2.1.1.3	INTEGER	read-write	Version number supported by destination node
INT pTrapAging	1.3.6.1.4.1.22.3.2.3	INTEGER	read-write	Time in sec. until we erase a trap entry
INT pTrapLearning	1.3.6.1.4.1.22.3.2.2	INTEGER	read-write	Learn the addresses of the managers automatically.
IP rTrapAddrAddr	1.3.6.1.4.1.22.3.1.1.1.1	IpAddress	read-write	IP address of entity requesting event notification
INT rTrapAddrAge	1.3.6.1.4.1.22.3.1.1.1.7	INTEGER	read-only	Aging time of the entry (in sec)
OCT rTrapAddrComm	1.3.6.1.4.1.22.3.1.1.1.2	OCTET STRING	read-write	Community name the receiving entity will expect. When reading the instance of this object the value has no meaning.
rTrapAddrEntry	1.3.6.1.4.1.22.3.1.1.1		not-accessible
INT rTrapAddrFlag	1.3.6.1.4.1.22.3.1.1.1.6	INTEGER	read-write	If the entry is fixed, it can not be deleted because of aging
INT rTrapAddrState	1.3.6.1.4.1.22.3.1.1.1.5	INTEGER	read-write	Determines status of this entry
rTrapAddrTbl	1.3.6.1.4.1.22.3.1.1		not-accessible	Table of managers to which traps must be sent. Up to 10 entries in table
OCT rTrapAddrType	1.3.6.1.4.1.22.3.1.1.1.4	OCTET STRING	read-write	Type of event that should be reported to this address, bit 0 - authentication trap bit 1 - other SNMP traps bit 2 - Error Traps bit 3 - Diagnostic Traps bit 4 - Debug Traps bit 5 - Enterprise Traps other than fmDiagGenericTrap
INT rTrapAddrVer	1.3.6.1.4.1.22.3.1.1.1.3	INTEGER	read-write	Version number supported by destination node
INT rTrapAging	1.3.6.1.4.1.22.3.1.3	INTEGER	read-only	Time in sec. until we erase a trap entry
INT rTrapLearning	1.3.6.1.4.1.22.3.1.2	INTEGER	read-only	Learn the addresses of the managers automatically.
trap	1.3.6.1.4.1.22.3
traperm	1.3.6.1.4.1.22.3.2
traprun	1.3.6.1.4.1.22.3.1
trapvar	1.3.6.1.4.1.22.3.3

RFC description

Manages trap generation and runtime parameters for Fibronics MultiHUB EDB network devices.

Start monitoring Fibronics International network equipment (SNMP trap-destination config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download EDB-snmp

What Is EDB-snmp?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description