All MIBs › EDB-snmp › fmDiagDebug
fmDiagDebug
Module: EDB-snmp
OID (symbolic): EDB-snmp::fmDiagDebug
OID (numeric): 1.3.6.1.4.1.22.51.5.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is for factory use only. Users must not write into this variable or improper operation can occur.
What is fmDiagDebug?
This OID switches the device between normal-mode and debug-mode operation, but per the MIB's own description it is for factory use only and improper writes can cause malfunction. Admins should leave this alone during normal operation and avoid setting it outside of vendor-guided troubleshooting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.51.5.4 snmpwalk -v2c -c public <target> EDB-snmp::fmDiagDebug
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22.51.5.4.1 snmpget -v2c -c public <target> EDB-snmp::fmDiagDebug.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.22.51.5.4.1 i <value>
Start monitoring Fibronics International network equipment (SNMP trap-destination config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EDB-snmp::fmDiagDebug OID value, configure state conditions and alerts, and monitor any Fibronics International network equipment (SNMP trap-destination config) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.22 | fibronics | EDB-snmp |
| 1.3.6.1.4.1.22.51 | fm800 | EDB-snmp |
| 1.3.6.1.4.1.22.51.5 | fmdiag | EDB-snmp |
| 1.3.6.1.4.1.22.51.5.4 | fmDiagDebug | EDB-snmp |