EDB-snmp :: fmSystemReset

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsEDB-snmpfmSystemReset

fmSystemReset

Module: EDB-snmp

OID (symbolic): EDB-snmp::fmSystemReset

OID (numeric): 1.3.6.1.4.1.22.51.1.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Resetting the CARD. When reading the instance of this object the value has no meaning. cold reset is performed with selftest , while warm start is performed without selftest

What is fmSystemReset?

This OID triggers a reset of the card as cold-reset (with self-test), warm-reset (without self-test), or power-up, though reading it back has no meaningful value. Admins use cold-reset when they want a full self-test during recovery and warm-reset for a faster restart when hardware diagnostics aren't needed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.51.1.1.4
snmpwalk -v2c -c public <target> EDB-snmp::fmSystemReset

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.22.51.1.1.4.1
snmpget -v2c -c public <target> EDB-snmp::fmSystemReset.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.22.51.1.1.4.1 i <value>

Start monitoring Fibronics International network equipment (SNMP trap-destination config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EDB-snmp::fmSystemReset OID value, configure state conditions and alerts, and monitor any Fibronics International network equipment (SNMP trap-destination config) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.22fibronicsEDB-snmp
1.3.6.1.4.1.22.51fm800EDB-snmp
1.3.6.1.4.1.22.51.1fmsystemEDB-snmp
1.3.6.1.4.1.22.51.1.1fmsystemrunEDB-snmp
1.3.6.1.4.1.22.51.1.1.4fmSystemResetEDB-snmp