EDB-snmp :: fmSlotTrapMask

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsEDB-snmpfmSlotTrapMask

fmSlotTrapMask

Module: EDB-snmp

OID (symbolic): EDB-snmp::fmSlotTrapMask

OID (numeric): 1.3.6.1.4.1.22.51.2.2.1.10

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: When the value is 1, no more traps from that slot are sent, until next reset. (temporary mask)

What is fmSlotTrapMask?

This OID, when set to mask(1), temporarily suppresses traps from this slot until the next reset; a value of no-mask(0) allows traps normally. Admins use this to quiet a noisy or known-faulty slot's traps without a persistent config change, since the mask clears itself on reset.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.51.2.2.1.10
snmpwalk -v2c -c public <target> EDB-snmp::fmSlotTrapMask

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.22.51.2.2.1.10.1
snmpget -v2c -c public <target> EDB-snmp::fmSlotTrapMask.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.22.51.2.2.1.10.1 i <value>

Start monitoring Fibronics International network equipment (SNMP trap-destination config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EDB-snmp::fmSlotTrapMask OID value, configure state conditions and alerts, and monitor any Fibronics International network equipment (SNMP trap-destination config) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.22fibronicsEDB-snmp
1.3.6.1.4.1.22.51fm800EDB-snmp
1.3.6.1.4.1.22.51.2fmslotEDB-snmp
1.3.6.1.4.1.22.51.2.2fmSlotTableEDB-snmp
1.3.6.1.4.1.22.51.2.2.1fmSlotEntryEDB-snmp
1.3.6.1.4.1.22.51.2.2.1.10fmSlotTrapMaskEDB-snmp