All MIBs › DSX-TE3-MIB
Organization: Nortel Networks
Last Updated: 2000-08-18
Category: Domain: Telco/Transport
Description: Manages DSX T3/E3 digital transmission interface configuration, framing, and performance statistics.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is DSX-TE3-MIB?
DSX-TE3-MIB is a vendor-specific interface MIB covering DSX-level T3/E3 digital transmission interface modules, defining configuration for line type, line coding, cable length, and transmit clock source, along with DS3-specific scrambling and bandwidth/timeslot options (shown commented out in the source, suggesting optional or deprecated features). It focuses on physical-layer transmission configuration for high-speed T3 (DS3, 44.736 Mbps) and E3 circuits, plus a Traps/Notifications branch for line-level fault events. Its monitoring value is centered on hardware and physical-layer status of T3/E3 circuits: administrators verify line type/line code configuration matches the far end, monitor cable length settings for signal integrity, and rely on the trap variables to be alerted to line alarms (e.g., loss of signal, alarm indication signal) as they occur on the interface. As a DSX-level interface MIB it commonly complements or overlaps with the standard DS3/E3 MIB (RFC 3896) for the base performance counters, while adding this vendor's own configuration objects. It is deployed on network equipment providing T3/E3 digital transmission interfaces, typically in carrier or enterprise WAN aggregation contexts. Engineers can download the DSX-TE3-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in DSX-TE3-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- T3/E3 (DS3) digital transmission interface module/device
Monitoring Examples
An administrator would check nndsxT3E3IfConfigLineTable / nndsxT3E3IfConfigLineEntry (indexed by nndsxT3E3IfIndex) for nndsxT3E3IfConfigLineType, nndsxT3E3IfConfigLineCode, and nndsxT3E3IfConfigCableLength to confirm the T3/E3 line is configured to match the far-end equipment and cable run length. nndsxT3E3IfConfigTransmitClock would be checked to verify the clock source (e.g., internal vs. line-derived) is correctly set, since a clocking mismatch commonly causes frame slips. The nndsxT3E3Traps / nndsxT3E3TrapVariables branch would be configured on the NMS to receive immediate notification of a T3/E3 line alarm such as loss of signal.
What Can Be Monitored
- T3/E3 line type and line coding configuration
- cable length setting
- transmit clock source
- T3/E3 line alarm/trap events
This MIB depends on
Related MIBs
Imported Objects
From DSX-TC-MIB
| LEDState | |
| nndsxT3E3IfGroup | OBJECT-IDENTITY |
| ntEnterpriseDataTasmanInterfaces | OBJECT-IDENTITY |
From SNMPv2-CONF
| NOTIFICATION-GROUP |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| nndsxT3E3MIB | 1.3.6.1.4.1.562.73.1.1.2.1.3.1 | Interface MIB definitions for T3/E3 interface modules. | ||
| nndsxT3E3IfConfigGroup | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1 | |||
| nndsxT3E3IfConfigLineTable | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.1 | not-accessible | A list of T3/E3 interfaces currently configured. | |
| nndsxT3E3IfConfigLineEntry | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.1.1 | not-accessible | An entry containing configuration information for each currently active T3/E3 interface. | |
| I32 nndsxT3E3IfIndex | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.1.1.1 | Integer32 | accessible-for-notify | An integer value that is an index to the entries of ifTable (MIB-II) whose interface type is ds3. |
| INT nndsxT3E3IfConfigLineType | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.1.1.2 | INTEGER | read-write | This variable indicates the variety of T3/E3 C-bit or E3 application implementing this interface. The type of interface affects the interpretation of the usage and error statistics. The rate of T3/E3 is 44.736 Mbps and E3 is 34.368 Mbps. The values, in sequence, describe: linetype-m13 ANSI T1.107-1988 linetype-cbitparity ANSI T1.107a-1990 |
| INT nndsxT3E3IfConfigLineCode | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.1.1.3 | INTEGER | read-only | This variable describes the variety of zero code suppression used on this interface, which in turn affects a number of its characteristics. linecode-B3ZS and linecode-HDB3 refer to the use of specified patterns of normal bits and bipolar violations that are used to replace sequences of zero bits of a specified length. |
| INT nndsxT3E3IfConfigCableLength | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.1.1.4 | INTEGER | read-write | The length of the T3/E3 line in feet. This object provides information for line build out circuitry if it exists and can use this object to adjust the line build out. |
| INT nndsxT3E3IfConfigTransmitClock | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.1.1.5 | INTEGER | read-write | The source of transmit clock. It is derived from the recovered receive clock of another T3/E3 interface. |
| nndsxT3E3IfAlarmConfigGroup | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.3 | |||
| nndsxT3E3IfAlarmThresholdConfigTable | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.3.1 | not-accessible | A list of TE3 interface alarm threshold configuration. | |
| nndsxT3E3IfAlarmThresholdConfigEntry | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.3.1.1 | not-accessible | An entry containing alarm configuration information for each currently active TE3 interface. | |
| I32 nndsxT3E3IfAlarmThresholdConfigIndex | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.3.1.1.1 | Integer32 | not-accessible | Index value of the threshold configuration. |
| INT nndsxT3E3IfAlarmThresholdConfigObject | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.3.1.1.2 | INTEGER | read-write | Configurable variables for the threshold alarm configuration. |
| INT nndsxT3E3IfAlarmThresholdConfigSamplingInterval | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.3.1.1.3 | INTEGER | read-write | Sampling interval for the threshold alarm. |
| INT nndsxT3E3IfAlarmThresholdConfigSampleType | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.3.1.1.4 | INTEGER | read-write | Sampling type for the threshold alarm. |
| I32 nndsxT3E3IfAlarmThresholdConfigRisingThreshold | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.3.1.1.5 | Integer32 | read-write | Rising threshold. |
| I32 nndsxT3E3IfAlarmThresholdConfigFallingThreshold | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.3.1.1.6 | Integer32 | read-write | Falling threshold. |
| T/F nndsxT3E3IfAlarmThresholdConfigEnable | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.3.1.1.7 | TruthValue | read-write | Config Enable: If TRUE then configure the threshold. FALSE then remove the threshold. |
| nndsxT3E3IfTestConfigTable | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.4 | not-accessible | A list of TE3 interface test configuration. | |
| nndsxT3E3IfTestConfigEntry | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.4.1 | not-accessible | An entry containing test configuration for each currently active TE3 interface. | |
| INT nndsxT3E3IfTestConfigType | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.4.1.1 | INTEGER | read-write | Test type for the TE3 interface. Only TestType is mandatory to perform no-test, payload-loopback-test, line-loopback-test, local-loopback-test or internal-loopback-test. ConfigLoopCode is mandatory to perform remote-lpup-test and remote-lpdn-test. ConfigPattern and ConfigTime are mandatory to perform pattern test on T3. The pattern-test, payload-loopback-test, local-loopback-test and internal-loopback-test are applicable only on Clear channel T3 interface. |
| INT nndsxT3E3IfTestConfigLoopCode | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.4.1.2 | INTEGER | read-write | Loopback code. |
| INT nndsxT3E3IfTestConfigPattern | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.4.1.3 | INTEGER | read-write | Bit Pattern type used in testing T3 for Pattern Test. |
| U32 nndsxT3E3IfTestConfigTime | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.4.1.4 | Unsigned32 | read-write | When set to 0, test time is unlimited. Otherwise duration of test, specified in seconds. |
| nndsxT3E3IfStatusGroup | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2 | |||
| nndsxT3E3IfStatusTable | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.1 | not-accessible | A list of TE3 interface status entries. | |
| nndsxT3E3IfStatusEntry | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.1.1 | not-accessible | An entry containing the status entry for each currently active TE3 interface. | |
| BIT nndsxT3E3IfStatusLineStatus | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.1.1.1 | Bits | read-only | Line Status of the T3/E3 interface. sendPattern - TRUE if the line transmiting bit pattern, sendTE3Code - sending T3/E3 code, sendResetCode - transmits Reset Code if it is TRUE, sendPayloadcode - transmits the payload code, sendLinecode - transmitts the line code, febe - Far End Block Error, pde - pulse Density code transmission, lorc - loss of recieve clock, rfebe - recieve far end block error, ris - recieve Idle signal, rexz - recieve exessive zeros, rcvTestCode - recieve test code, loopback - loopback status , rlos - recieve loss of signal, rlof - recieve loss of frame, tais - transmit alarm indication signal, rais - recieve alarm indication signal, trai - transmit remote alarm indication, rrai - recieve remote alarm indication, |
| INT nndsxT3E3IfStatusTransmitClock | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.1.1.2 | INTEGER | read-only | The source of tranmit clock. 'timing-line' indicates that the recovered receive clock is used as the transmit clock. 'timing-internal' indicates that a local clock source is used. |
| nndsxT3E3IfAlarmStatusTable | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.2 | not-accessible | A list of T3/E3 interface status entries. | |
| nndsxT3E3IfAlarmStatusEntry | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.2.1 | not-accessible | An entry containing the status entry for each currently active T3/E3 interface. | |
| BIT nndsxT3E3IfAlarmStatusAlarmStatus | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.2.1.1 | Bits | read-only | Current status of all the T3/E3 interface alarms. RRAI - Recieve Remote Alarm Indication, TRAI - Transmit Remote Alarm Indication, TAIS - Transmit Alarm Indication Siganl, RLOF - Recieve Loss Of Frame, RLOS - Recieve Loss Of Sync, Loopback - Status of Loop back, rcvTestCode - Recieve Test Code, rblu - Recieve Blue Alarm, RIS - Recieve Idle Signal, REXZ - Recieve Excessive Zeros, RFBE - Recieve Frame Bit Error, RPE - Recieve Parity Error, RCPE - Recieve C-Parity Error, LORC - Loss Of Recive Clock (LORC), TPDE - transmit pulse density, RAIS - Recieve Alarm Indication Signal, TFEBE - Transmit Far End Block Alarm. |
| BIT nndsxT3E3IfAlarmStatusThresholdStatus | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.2.1.2 | Bits | read-only | Current status of all the configured threshold alarms. |
| nndsxT3E3IfTestStatusTable | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.3 | not-accessible | A list of T3/E3 interface test status entries. | |
| nndsxT3E3IfTestStatusEntry | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.3.1 | not-accessible | An entry containing the status entry for each currently active T3/E3 interface. | |
| INT nndsxT3E3IfTestStatusTestType | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.3.1.1 | INTEGER | read-only | The test type. |
| INT nndsxT3E3IfTestStatusTestState | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.3.1.2 | INTEGER | read-only | State of the test invoked. |
| INT nndsxT3E3IfTestStatusLoopCode | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.3.1.3 | INTEGER | read-only | Line code for loop back test. |
| nndsxT3E3IfLastTestResultTable | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.4 | not-accessible | A list of T3/E3 interface test status entries. | |
| nndsxT3E3IfLastTestResultEntry | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.4.1 | not-accessible | An entry containing the status entry for each currently active T3/E3 interface. | |
| INT nndsxT3E3IfLastTestResultTestType | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.4.1.1 | INTEGER | read-only | The test type. |
| INT nndsxT3E3IfLastTestResultTestState | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.4.1.2 | INTEGER | read-only | State of the test invoked. |
| INT nndsxT3E3IfLastTestResultLoopCode | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.4.1.3 | INTEGER | read-only | The loopcode used to loopback the T3/E3 interface in previous test. |
| nndsxT3E3IfStatsGroup | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3 | |||
| nndsxT3E3IfArchiveStatsValidIntervalsTable | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.1 | not-accessible | A list of T3/E3 interface ValidIntervals entries. | |
| nndsxT3E3IfArchiveStatsValidIntervalsEntry | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.1.1 | not-accessible | An entry containing a valid intervals entry for each currently active T3/E3 interface. | |
| U32 nndsxT3E3IfAnsiArchiveStatsValidIntervals | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.1.1.1 | Unsigned32 | read-only | Archive Stats Valid Interval for ANSI. |
| U32 nndsxT3E3IfIetfArchiveStatsValidIntervals | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.1.1.2 | Unsigned32 | read-only | Archive stats valid interval for IETF. |
| U32 nndsxT3E3IfUserTotalStatsValidDays | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.1.1.3 | Unsigned32 | read-only | User total stats valid days. |
| I32 nndsxT3E3IfUserArchiveStatsValidIntervals | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.1.1.4 | Integer32 | read-write | User archive stats valid interval. Setting this variable to 0 will clear the user statistics tables. |
| nndsxT3E3IfErrorEventStatsTable | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.2 | not-accessible | A list of T3/E3 interface error events entries. | |
| nndsxT3E3IfErrorEventStatsEntry | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.2.1 | not-accessible | An entry containing error events that occured on the T3/E3 interface. | |
| U32 nndsxT3E3IfErrorEventStatsPBE | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.2.1.2 | Unsigned32 | read-only | Parity bit error events count. |
| U32 nndsxT3E3IfErrorEventStatsFEBE | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.2.1.3 | Unsigned32 | read-only | Far end block error (FEBE) event count. |
| nndsxT3E3IfAnsiStatsGroup | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3 | |||
| nndsxT3E3IfAnsiCurrentStatsTable | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.1 | not-accessible | A list of T3/E3 interface current 15-minute interval statistics entries. | |
| nndsxT3E3IfAnsiCurrentStatsEntry | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.1.1 | not-accessible | An entry containing status entry for each currently active T3/E3 interface. | |
| T/F nndsxT3E3IfAnsiCurrentStatsUASState | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.1.1.1 | TruthValue | read-only | Current state of availablity of the T3/E3 line. |
| U32 nndsxT3E3IfAnsiCurrentStatsTimeInCurrent | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.1.1.2 | Unsigned32 | read-only | Current time for statistics. |
| U32 nndsxT3E3IfAnsiCurrentPathStatsCV | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.1.1.3 | Unsigned32 | read-only | The number of path coding violations encountered by a T3/E3 interface in the current 15-minute interval. |
| U32 nndsxT3E3IfAnsiCurrentPathStatsES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.1.1.4 | Unsigned32 | read-only | The number of errored seconds encountered by a T3/E3 interface in the current 15-minute interval. |
| U32 nndsxT3E3IfAnsiCurrentPathStatsSES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.1.1.5 | Unsigned32 | read-only | The number of severely errored seconds encountered by a T3/E3 interface in the current 15-minute interval. |
| U32 nndsxT3E3IfAnsiCurrentPathStatsSAS | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.1.1.6 | Unsigned32 | read-only | The number of severely errored framing seconds encountered by a T3/E3 interface in the current 15-minute interval. |
| U32 nndsxT3E3IfAnsiCurrentPathStatsUAS | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.1.1.7 | Unsigned32 | read-only | The number of unavailable seconds encountered by a T3/E3 interface in the current 15-minute interval. |
| U32 nndsxT3E3IfAnsiCurrentLineStatsCV | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.1.1.8 | Unsigned32 | read-only | The number of path coding violations encountered by a T3/E3 interface in the current 15-minute interval. |
| U32 nndsxT3E3IfAnsiCurrentLineStatsES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.1.1.9 | Unsigned32 | read-only | The number of errored seconds encountered by a T3/E3 interface in the current 15-minute interval. |
| U32 nndsxT3E3IfAnsiCurrentLineStatsSES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.1.1.10 | Unsigned32 | read-only | The number of severely errored seconds encountered by a T3/E3 interface in the current 15-minute interval. |
| nndsxT3E3IfAnsiTotalStatsTable | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.2 | not-accessible | Entries of total statistics collected over past 24 hours on a T3/E3 interface. | |
| nndsxT3E3IfAnsiTotalStatsEntry | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.2.1 | not-accessible | An entry containing the status entry for each currently active T3/E3 interface. | |
| U32 nndsxT3E3IfAnsiTotalPathStatsCV | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.2.1.1 | Unsigned32 | read-only | The number of path coding violations encountered by a T3/E3 interface in the previous 24-hour interval. |
| U32 nndsxT3E3IfAnsiTotalPathStatsES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.2.1.2 | Unsigned32 | read-only | The number of errored seconds encountered by a T3/E3 interface in the previous 24-hour interval. |
| U32 nndsxT3E3IfAnsiTotalPathStatsSES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.2.1.3 | Unsigned32 | read-only | The number of severely errored seconds encountered by a T3/E3 interface in the previous 24-hour interval. |
| U32 nndsxT3E3IfAnsiTotalPathStatsSAS | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.2.1.4 | Unsigned32 | read-only | The number of severely alarm aeconds encountered by a T3/E3 interface in the previous 24-hour interval. |
| U32 nndsxT3E3IfAnsiTotalPathStatsUAS | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.2.1.5 | Unsigned32 | read-only | The number of unavailable seconds encountered by a T3/E3 interface in the previous 24-hour interval. |
| U32 nndsxT3E3IfAnsiTotalLineStatsCV | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.2.1.6 | Unsigned32 | read-only | The number of path coding violations encountered by a T3/E3 interface in the previous 24-hour interval. |
| U32 nndsxT3E3IfAnsiTotalLineStatsES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.2.1.7 | Unsigned32 | read-only | The number of errored seconds encountered by a T3/E3 interface in the previous 24-hour interval. |
| U32 nndsxT3E3IfAnsiTotalLineStatsSES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.2.1.8 | Unsigned32 | read-only | The number of severely errored seconds encountered by a T3/E3 interface in the previous 24-hour interval. |
| nndsxT3E3IfAnsiArchiveIntervalStatsTable | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.3 | not-accessible | A list of T3/E3 interface archive statistics entries. | |
| nndsxT3E3IfAnsiArchiveIntervalStatsEntry | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.3.1 | not-accessible | An entry containing the status entry for each currently active T3/E3 interface. | |
| U32 nndsxT3E3IfAnsiArchiveStatsInterval | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.3.1.1 | Unsigned32 | not-accessible | Entries of the ANSI archive statistics collected for T3/E3 a interface. |
| U32 nndsxT3E3IfAnsiArchiveIntervalPathStatsCV | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.3.1.2 | Unsigned32 | read-only | The number of path coding violations encountered by a T3/E3 interface in the current interval. |
| U32 nndsxT3E3IfAnsiArchiveIntervalPathStatsES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.3.1.3 | Unsigned32 | read-only | The number of errored seconds encountered by a T3/E3 interface in the current interval. |
| U32 nndsxT3E3IfAnsiArchiveIntervalPathStatsSES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.3.1.4 | Unsigned32 | read-only | The number of severely errored seconds encountered by a T3/E3 interface in the current interval. |
| U32 nndsxT3E3IfAnsiArchiveIntervalPathStatsSAS | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.3.1.5 | Unsigned32 | read-only | The number of severely errored framing seconds encountered by a T3/E3 interface in the current interval. |
| U32 nndsxT3E3IfAnsiArchiveIntervalPathStatsUAS | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.3.1.6 | Unsigned32 | read-only | The number of unavailable seconds encountered by a T3/E3 interface in the current interval. |
| U32 nndsxT3E3IfAnsiArchiveIntervalLineStatsCV | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.3.1.7 | Unsigned32 | read-only | The number of path coding violations encountered by a T3/E3 interface in the current interval. |
| U32 nndsxT3E3IfAnsiArchiveIntervalLineStatsES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.3.1.8 | Unsigned32 | read-only | The number of errored seconds encountered by a T3/E3 interface in the current interval. |
| U32 nndsxT3E3IfAnsiArchiveIntervalLineStatsSES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.3.3.1.9 | Unsigned32 | read-only | The number of severely errored seconds encountered by a T3/E3 interface in the current interval. |
| nndsxT3E3IfIetfStatsGroup | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4 | |||
| nndsxT3E3IfIetfCurrentStatsTable | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.1 | not-accessible | A list of the current 15-minute IETF-based statistics collected for T3/E3 interface. | |
| nndsxT3E3IfIetfCurrentStatsEntry | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.1.1 | not-accessible | An entry containing the status entry for each currently active T3/E3 interface. | |
| T/F nndsxT3E3IfIetfCurrentStatsUASState | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.1.1.1 | TruthValue | read-only | Current state of availablity of the interface. |
| U32 nndsxT3E3IfIetfCurrentStatsTimeInCurrent | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.1.1.2 | Unsigned32 | read-only | The number of seconds that have elapsed since the beginning of the current IETF error-measurement period. |
| U32 nndsxT3E3IfIetfCurrentStatsPES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.1.1.3 | Unsigned32 | read-only | The number of IETF parity errored seconds encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfIetfCurrentStatsPSES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.1.1.4 | Unsigned32 | read-only | The number of parity severely errored seconds encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfIetfCurrentStatsSEFS | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.1.1.5 | Unsigned32 | read-only | The number of IETF severely errored framing seconds encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfIetfCurrentStatsUAS | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.1.1.6 | Unsigned32 | read-only | The number of unavailable seconds encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfIetfCurrentStatsLCV | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.1.1.7 | Unsigned32 | read-only | The number of line code violations encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfIetfCurrentStatsPCV | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.1.1.8 | Unsigned32 | read-only | The number of IETF path coding violations, encountered by a T3/E3 interface that are reported via the far-end block-error count. |
| U32 nndsxT3E3IfIetfCurrentStatsLES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.1.1.9 | Unsigned32 | read-only | The number of IETF line errored seconds encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfIetfCurrentStatsCCV | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.1.1.10 | Unsigned32 | read-only | The number of IETF C-bit coding violations encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfIetfCurrentStatsCES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.1.1.11 | Unsigned32 | read-only | The number of IETF C-bit errored seconds encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfIetfCurrentStatsCSES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.1.1.12 | Unsigned32 | read-only | The number of IETF C-Bit severely errored seconds. |
| nndsxT3E3IfIetfTotalStatsTable | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.2 | not-accessible | A list of entries for statistics collected over 24 hours. | |
| nndsxT3E3IfIetfTotalStatsEntry | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.2.1 | not-accessible | An entry containing the status entry for each currently active T3/E3 interface. | |
| U32 nndsxT3E3IfIetfTotalStatsPES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.2.1.1 | Unsigned32 | read-only | Total number of IETF errored seconds encountered by a T3/E3 interface during past 24 hours. |
| U32 nndsxT3E3IfIetfTotalStatsPSES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.2.1.2 | Unsigned32 | read-only | Total number of IETF severely errored seconds encountered by a T3/E3 interface during past 24 hours. |
| U32 nndsxT3E3IfIetfTotalStatsSEFS | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.2.1.3 | Unsigned32 | read-only | Total number of IETF severely errored framing seconds encountered by a T3/E3 interface during the past 24 hours. |
| U32 nndsxT3E3IfIetfTotalStatsUAS | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.2.1.4 | Unsigned32 | read-only | Total number of unavailable seconds encountered by a T3/E3 interface during past 24 hours. |
| U32 nndsxT3E3IfIetfTotalStatsLCV | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.2.1.5 | Unsigned32 | read-only | Total number of line code violations encountered by a T3/E3 interface during past 24 hours. |
| U32 nndsxT3E3IfIetfTotalStatsPCV | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.2.1.6 | Unsigned32 | read-only | Total number of IETF path coding violations encountered by a T3/E3 interface during past 24 hours. |
| U32 nndsxT3E3IfIetfTotalStatsLES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.2.1.7 | Unsigned32 | read-only | Total number of IETF line errored seconds encountered by a T3/E3 interface during past 24 hours. |
| U32 nndsxT3E3IfIetfTotalStatsCCV | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.2.1.8 | Unsigned32 | read-only | Total number of IETF C-bit parity code violation encountered by a T3/E3 interface during past 24 hours. |
| U32 nndsxT3E3IfIetfTotalStatsCES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.2.1.9 | Unsigned32 | read-only | Total number of IETF C-bit parity errored seconds encountered by a T3/E3 interface during past 24 hours. |
| U32 nndsxT3E3IfIetfTotalStatsCSES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.2.1.10 | Unsigned32 | read-only | Total number of IETF C-bit parity severely errored seconds encountered by a T3/E3 interface during past 24 hours. |
| nndsxT3E3IfIetfArchiveStatsTable | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.3 | not-accessible | A list of T3/E3 interface IETF archive statistics entries. | |
| nndsxT3E3IfIetfArchiveStatsEntry | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.3.1 | not-accessible | An entry containing status entry for each currently active T3/E3 interface. | |
| U32 nndsxT3E3IfIetfArchiveStatsInterval | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.3.1.1 | Unsigned32 | not-accessible | The total number of intervals for which statistics would be collected. |
| U32 nndsxT3E3IfIetfArchiveStatsPES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.3.1.2 | Unsigned32 | read-only | The number of IETF errored seconds encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfIetfArchiveStatsPSES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.3.1.3 | Unsigned32 | read-only | The number of IETF severely errored seconds encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfIetfArchiveStatsSEFS | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.3.1.4 | Unsigned32 | read-only | The number of IETF severely errored framing seconds encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfIetfArchiveStatsUAS | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.3.1.5 | Unsigned32 | read-only | The number of unavailable seconds encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfIetfArchiveStatsLCV | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.3.1.6 | Unsigned32 | read-only | The number of line code violations encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfIetfArchiveStatsPCV | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.3.1.7 | Unsigned32 | read-only | The number of IETF path coding violations, encountered by a T3/E3 interface that are reported via the far-end block-error count. |
| U32 nndsxT3E3IfIetfArchiveStatsLES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.3.1.8 | Unsigned32 | read-only | The number of IETF line errored seconds encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfIetfArchiveStatsCCV | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.3.1.9 | Unsigned32 | read-only | The number of IETF C-bit parity code violations encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfIetfArchiveStatsCES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.3.1.10 | Unsigned32 | read-only | The number of IETF C-bit parity errored seconds encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfIetfArchiveStatsCSES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.4.3.1.11 | Unsigned32 | read-only | The number of IETF C-bit parity severrly errored seconds encountered by a T3/E3 interface. |
| nndsxT3E3IfUserStatsGroup | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5 | |||
| nndsxT3E3IfUserCurrentStatsTable | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.1 | not-accessible | A list of T3/E3 interface user current 15-minute interval statistics entries. | |
| nndsxT3E3IfUserCurrentStatsEntry | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.1.1 | not-accessible | An entry containing status entry for each currently active T3/E3 interface. | |
| T/F nndsxT3E3IfUserCurrentStatsUASState | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.1.1.1 | TruthValue | read-only | The current status of availablity of the T3/E3 interface. |
| U32 nndsxT3E3IfUserCurrentStatsTimeInCurrent | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.1.1.2 | Unsigned32 | read-only | The number of seconds that have elapsed since the beginning of the current error-measurement period. |
| U32 nndsxT3E3IfUserCurrentStatsLCV | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.1.1.3 | Unsigned32 | read-only | The number of line code violations encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfUserCurrentStatsFBE | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.1.1.4 | Unsigned32 | read-only | The number of frame bit errors encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfUserCurrentStatsPBE | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.1.1.5 | Unsigned32 | read-only | The number of parity bit errors encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfUserCurrentStatsCPBE | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.1.1.6 | Unsigned32 | read-only | The number of C-parity bit errors encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfUserCurrentStatsFEBE | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.1.1.7 | Unsigned32 | read-only | The number of far end block errors encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfUserCurrentStatsCOFA | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.1.1.9 | Unsigned32 | read-only | The number of change of frame alignment encountered by a T3/E3 interface. |
| nndsxT3E3IfUserLifetimeStatsTable | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.3 | not-accessible | A list of T3/E3 interface statistics entries collected since the system was powered on. | |
| nndsxT3E3IfUserLifetimeStatsEntry | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.3.1 | not-accessible | An entry containing status entry for each currently active T3/E3 interface. | |
| U32 nndsxT3E3IfUserLifetimeStatsUAS | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.3.1.4 | Unsigned32 | read-only | Total number of unavailable seconds encountered by a T3/E3 interface since the interface came up. |
| U32 nndsxT3E3IfUserLifetimeStatsLCV | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.3.1.5 | Unsigned32 | read-only | Total number of line code violations encountered by a T3/E3 interface since the interface came up. |
| U32 nndsxT3E3IfUserLifetimeStatsLES | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.3.1.7 | Unsigned32 | read-only | Total number of line errored seconds encountered by a T3/E3 interface since the interface came up. |
| U32 nndsxT3E3IfUserLifetimeStatsFBE | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.3.1.10 | Unsigned32 | read-only | Total number of frame bit errors encountered by a T3/E3 interface since the interface came up. |
| U32 nndsxT3E3IfUserLifetimeStatsPBE | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.3.1.11 | Unsigned32 | read-only | Total number of parity bit errors encountered by a T3/E3 interface since the interface came up. |
| U32 nndsxT3E3IfUserLifetimeStatsCPBE | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.3.1.12 | Unsigned32 | read-only | Total number of C-bit parity errors encountered by a T3/E3 interface since the interface came up. |
| U32 nndsxT3E3IfUserLifetimeStatsFEBE | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.3.1.13 | Unsigned32 | read-only | Total number of far end block errors encountered by a T3/E3 interface since the interface came up. |
| U32 nndsxT3E3IfUserLifetimeStatsCOFA | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.3.1.15 | Unsigned32 | read-only | Total number of frame alignment changes encountered by a T3/E3 interface since the interface came up. |
| nndsxT3E3IfUserArchiveStatsTable | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.4 | not-accessible | A list of T3/E3 interface user archive statistics entries. | |
| nndsxT3E3IfUserArchiveStatsEntry | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.4.1 | not-accessible | An entry containing a status entry for each currently active T3/E3 interface. | |
| U32 nndsxT3E3IfUserArchiveStatsInterval | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.4.1.1 | Unsigned32 | not-accessible | The total number of intervals for which statistics would be collected. |
| U32 nndsxT3E3IfUserArchiveStatsLCV | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.4.1.2 | Unsigned32 | read-only | The number of line code violations encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfUserArchiveStatsFBE | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.4.1.3 | Unsigned32 | read-only | The number of frame bit errors encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfUserArchiveStatsPBE | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.4.1.4 | Unsigned32 | read-only | The number of parity bit errors encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfUserArchiveStatsCPBE | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.4.1.5 | Unsigned32 | read-only | The number of C parity bit errors encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfUserArchiveStatsFEBE | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.4.1.6 | Unsigned32 | read-only | The number of far end block errors encountered by a T3/E3 interface. |
| U32 nndsxT3E3IfUserArchiveStatsCOFA | 1.3.6.1.4.1.562.73.1.1.2.1.3.1.3.5.4.1.8 | Unsigned32 | read-only | The number of change of frame alignment encountered by a T3/E3 interface. |
| nndsxT3E3Traps | 1.3.6.1.4.1.562.73.1.1.2.1.3.2 | |||
| nndsxT3E3Notifications | 1.3.6.1.4.1.562.73.1.1.2.1.3.2.0 | |||
| NTF nndsxT3E3AlarmOnTrap | 1.3.6.1.4.1.562.73.1.1.2.1.3.2.0.1 | T3/E3 interface alarm trap for Alarm On state. | ||
| NTF nndsxT3E3AlarmOffTrap | 1.3.6.1.4.1.562.73.1.1.2.1.3.2.0.2 | T3/E3 interface alarm trap for Alarm Off state. | ||
| nndsxT3E3TrapVariables | 1.3.6.1.4.1.562.73.1.1.2.1.3.2.1 | |||
| STR nndsxT3E3Number | 1.3.6.1.4.1.562.73.1.1.2.1.3.2.1.1 | DisplayString | accessible-for-notify | This variable indicates the T3/E3 interface number from where this alarm originated. |
| INT nndsxT3E3AlarmType | 1.3.6.1.4.1.562.73.1.1.2.1.3.2.1.2 | INTEGER | accessible-for-notify | Alarm status T3/E3 interface RRAI - Recieve Receive Alarm Indication, TRAI - Transmit Receive Alarm Indication, TAIS - Transmit Alarm Indication Siganl, RLOF - Recieve Loss Of Frame, RLOS - Recieve Loss Of Sync, Loopback - Status of Loop back, rcvTestCode - Receive Test Code, rblu - Receive Blue Alarm, RIS - Receive Idle Signal, REXZ - Receive Excessive Zeros, RFBE - Receive Frame Bit Error, RPE - Receive Parity Error, RCPE - Receive C-Parity Error, LORC - Loss Of Receive Clock (LORC), TPDE - transmit pulse density, RAIS - Recieve Alarm Indication Signal, TFEBE - Transmit Far End Block Alarm, Threshold 1-10 - TRUE if it is configured. |
| nndsxT3E3NotificationGroup | 1.3.6.1.4.1.562.73.1.1.2.1.3.3 | dsxT3E3 Notification Group |
RFC description
Vendor-private MIB for DSX TE3 (T3/E3 terminal equipment) monitoring and management.
Start monitoring Nortel DSX T3/E3 (DS3) interface module with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.