All MIBs › DSX-TE3-MIB › nndsxT3E3IfConfigLineCode
nndsxT3E3IfConfigLineCode
Module: DSX-TE3-MIB
OID (symbolic): DSX-TE3-MIB::nndsxT3E3IfConfigLineCode
OID (numeric): 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This variable describes the variety of zero code suppression used on this interface, which in turn affects a number of its characteristics.
linecode-B3ZS and linecode-HDB3 refer to the use of specified patterns of normal bits and bipolar violations that are used to replace sequences of zero bits of a specified length.
What is nndsxT3E3IfConfigLineCode?
This reports the zero-code-suppression line coding in use on the T3/E3 circuit, either B3ZS or HDB3, both of which replace long runs of zero bits with a pattern that includes deliberate bipolar violations so the far end can recover clock timing. It is read-only because the coding is normally fixed by the interface hardware and the carrier's line build, so an administrator reads it to confirm the module matches what the circuit was provisioned for rather than to change it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.1.1.3 snmpwalk -v2c -c public <target> DSX-TE3-MIB::nndsxT3E3IfConfigLineCode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.1.1.3.1 snmpget -v2c -c public <target> DSX-TE3-MIB::nndsxT3E3IfConfigLineCode.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> nndsxT3E3IfConfigLineCode.1
Start monitoring Nortel DSX T3/E3 (DS3) interface module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DSX-TE3-MIB::nndsxT3E3IfConfigLineCode OID value, configure state conditions and alerts, and monitor any Nortel DSX T3/E3 (DS3) interface module from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.73 | ntEnterpriseData | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1 | ntEnterpriseDataMibs | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1.1 | ntEnterpriseDataTasmanMibs | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1.1.2 | ntEnterpriseDataTasmanInterfaces | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1 | nndsxMIB | DSX-TC-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.3 | nndsxT3E3IfGroup | DSX-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.73.1.1.2.1.3.1 | nndsxT3E3MIB | DSX-TE3-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1 | nndsxT3E3IfConfigGroup | DSX-TE3-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.1 | nndsxT3E3IfConfigLineTable | DSX-TE3-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.1.1 | nndsxT3E3IfConfigLineEntry | DSX-TE3-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.1.1.3 | nndsxT3E3IfConfigLineCode | DSX-TE3-MIB |