All MIBs › DSX-TE3-MIB › nndsxT3E3IfTestConfigType
nndsxT3E3IfTestConfigType
Module: DSX-TE3-MIB
OID (symbolic): DSX-TE3-MIB::nndsxT3E3IfTestConfigType
OID (numeric): 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.4.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Test type for the TE3 interface. Only TestType is mandatory to perform no-test, payload-loopback-test, line-loopback-test, local-loopback-test or internal-loopback-test.
ConfigLoopCode is mandatory to perform remote-lpup-test and remote-lpdn-test.
ConfigPattern and ConfigTime are mandatory to perform pattern test on T3.
The pattern-test, payload-loopback-test, local-loopback-test and internal-loopback-test are applicable only on Clear channel T3 interface.
What is nndsxT3E3IfTestConfigType?
This starts (or stops, with no-test) an on-demand diagnostic on the T3/E3 interface: payload, line, local, or internal loopback, a bit-pattern test, or a remote loop-up/loop-down request sent to the far end. Some choices need extra configuration in the same row to be valid: a remote loop-up or loop-down needs nndsxT3E3IfTestConfigLoopCode, and the pattern test needs nndsxT3E3IfTestConfigPattern and nndsxT3E3IfTestConfigTime, and several of the loopback tests only apply on a clear-channel T3 port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.4.1.1 snmpwalk -v2c -c public <target> DSX-TE3-MIB::nndsxT3E3IfTestConfigType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.4.1.1.1 snmpget -v2c -c public <target> DSX-TE3-MIB::nndsxT3E3IfTestConfigType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.4.1.1.1 i <value>
Start monitoring Nortel DSX T3/E3 (DS3) interface module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DSX-TE3-MIB::nndsxT3E3IfTestConfigType OID value, configure state conditions and alerts, and monitor any Nortel DSX T3/E3 (DS3) interface module from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.73 | ntEnterpriseData | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1 | ntEnterpriseDataMibs | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1.1 | ntEnterpriseDataTasmanMibs | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1.1.2 | ntEnterpriseDataTasmanInterfaces | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1 | nndsxMIB | DSX-TC-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.3 | nndsxT3E3IfGroup | DSX-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.73.1.1.2.1.3.1 | nndsxT3E3MIB | DSX-TE3-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1 | nndsxT3E3IfConfigGroup | DSX-TE3-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.4 | nndsxT3E3IfTestConfigTable | DSX-TE3-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.4.1 | nndsxT3E3IfTestConfigEntry | DSX-TE3-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.3.1.1.4.1.1 | nndsxT3E3IfTestConfigType | DSX-TE3-MIB |