All MIBs › DSX-TE3-MIB › nndsxT3E3IfStatusLineStatus
nndsxT3E3IfStatusLineStatus
Module: DSX-TE3-MIB
OID (symbolic): DSX-TE3-MIB::nndsxT3E3IfStatusLineStatus
OID (numeric): 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.1.1.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: Line Status of the T3/E3 interface. sendPattern - TRUE if the line transmiting bit pattern, sendTE3Code - sending T3/E3 code, sendResetCode - transmits Reset Code if it is TRUE, sendPayloadcode - transmits the payload code, sendLinecode - transmitts the line code, febe - Far End Block Error, pde - pulse Density code transmission, lorc - loss of recieve clock, rfebe - recieve far end block error, ris - recieve Idle signal, rexz - recieve exessive zeros, rcvTestCode - recieve test code, loopback - loopback status , rlos - recieve loss of signal, rlof - recieve loss of frame, tais - transmit alarm indication signal, rais - recieve alarm indication signal, trai - transmit remote alarm indication, rrai - recieve remote alarm indication,
What is nndsxT3E3IfStatusLineStatus?
This BITS value reports the interface's current line-level condition as a set of independent flags, covering both what the local side is transmitting (a bit pattern, T3/E3 code, reset code, payload code, or line code) and what it is receiving or detecting (far-end block errors, pulse density violations, loss of receive clock, receive alarm/idle/excessive-zeros conditions, receive loss of signal or frame, and both transmit and receive remote/blue alarm indications). An administrator reads this bitmap to get an instant snapshot of everything currently wrong (or active by test) on the physical line without polling each condition separately.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.1.1.1 snmpwalk -v2c -c public <target> DSX-TE3-MIB::nndsxT3E3IfStatusLineStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.1.1.1.1 snmpget -v2c -c public <target> DSX-TE3-MIB::nndsxT3E3IfStatusLineStatus.1
Start monitoring Nortel DSX T3/E3 (DS3) interface module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DSX-TE3-MIB::nndsxT3E3IfStatusLineStatus OID value, configure state conditions and alerts, and monitor any Nortel DSX T3/E3 (DS3) interface module from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.73 | ntEnterpriseData | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1 | ntEnterpriseDataMibs | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1.1 | ntEnterpriseDataTasmanMibs | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1.1.2 | ntEnterpriseDataTasmanInterfaces | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1 | nndsxMIB | DSX-TC-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.3 | nndsxT3E3IfGroup | DSX-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.73.1.1.2.1.3.1 | nndsxT3E3MIB | DSX-TE3-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2 | nndsxT3E3IfStatusGroup | DSX-TE3-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.1 | nndsxT3E3IfStatusTable | DSX-TE3-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.1.1 | nndsxT3E3IfStatusEntry | DSX-TE3-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.1.1.1 | nndsxT3E3IfStatusLineStatus | DSX-TE3-MIB |