All MIBs › DSX-TE3-MIB › nndsxT3E3IfAlarmStatusAlarmStatus
nndsxT3E3IfAlarmStatusAlarmStatus
Module: DSX-TE3-MIB
OID (symbolic): DSX-TE3-MIB::nndsxT3E3IfAlarmStatusAlarmStatus
OID (numeric): 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.2.1.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: Current status of all the T3/E3 interface alarms. RRAI - Recieve Remote Alarm Indication, TRAI - Transmit Remote Alarm Indication, TAIS - Transmit Alarm Indication Siganl, RLOF - Recieve Loss Of Frame, RLOS - Recieve Loss Of Sync, Loopback - Status of Loop back, rcvTestCode - Recieve Test Code, rblu - Recieve Blue Alarm, RIS - Recieve Idle Signal, REXZ - Recieve Excessive Zeros, RFBE - Recieve Frame Bit Error, RPE - Recieve Parity Error, RCPE - Recieve C-Parity Error, LORC - Loss Of Recive Clock (LORC), TPDE - transmit pulse density, RAIS - Recieve Alarm Indication Signal, TFEBE - Transmit Far End Block Alarm.
What is nndsxT3E3IfAlarmStatusAlarmStatus?
This BITS value is the current snapshot of every hardware alarm condition the T3/E3 interface can detect at once, including receive and transmit remote/blue/idle/alarm-indication signals, receive loss of frame or sync, loopback state, excessive zeros, frame/parity/C-parity errors, loss of receive clock, and far-end block errors. An administrator polls this bitmap (or watches for the nndsxT3E3AlarmOnTrap/nndsxT3E3AlarmOffTrap notifications that reference it) to see which specific hardware alarms are active on the circuit right now.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.2.1.1 snmpwalk -v2c -c public <target> DSX-TE3-MIB::nndsxT3E3IfAlarmStatusAlarmStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.2.1.1.1 snmpget -v2c -c public <target> DSX-TE3-MIB::nndsxT3E3IfAlarmStatusAlarmStatus.1
Start monitoring Nortel DSX T3/E3 (DS3) interface module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DSX-TE3-MIB::nndsxT3E3IfAlarmStatusAlarmStatus OID value, configure state conditions and alerts, and monitor any Nortel DSX T3/E3 (DS3) interface module from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.73 | ntEnterpriseData | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1 | ntEnterpriseDataMibs | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1.1 | ntEnterpriseDataTasmanMibs | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1.1.2 | ntEnterpriseDataTasmanInterfaces | NT-ENTERPRISE-DATA-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1 | nndsxMIB | DSX-TC-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.3 | nndsxT3E3IfGroup | DSX-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.73.1.1.2.1.3.1 | nndsxT3E3MIB | DSX-TE3-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2 | nndsxT3E3IfStatusGroup | DSX-TE3-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.2 | nndsxT3E3IfAlarmStatusTable | DSX-TE3-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.2.1 | nndsxT3E3IfAlarmStatusEntry | DSX-TE3-MIB |
| 1.3.6.1.4.1.562.73.1.1.2.1.3.1.2.2.1.1 | nndsxT3E3IfAlarmStatusAlarmStatus | DSX-TE3-MIB |