All MIBs › CXGwMux-MIB
Category: Vendor: Memotec
Description: Manages multiplexed gateway services and channel aggregation on CX Memotec devices.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CXGwMux-MIB?
CXGwMux-MIB is a vendor-specific Aastra/Memotec (CX) MIB managing gateway multiplexing services that combine voice and data traffic over shared WAN links, including channel aggregation between a bus interface and the WAN. It exposes configuration parameters (timing, buffering, flow control factors) alongside live counters for messages and acknowledgments passed between the bus and WAN sides. For hardware/software status monitoring, the key value is in the counters such as gmfCntUnexpLinkNoFromWan and the various message-relay counters, which reveal link synchronization problems, dropped frames, or protocol errors in the multiplexing engine, plus gmfState to see the current operational state of the mux function. It works in conjunction with lower-layer WAN link MIBs (e.g., CXLapBD-MIB, CXMLPPP-MIB) that carry the aggregated traffic. It is typically deployed on Aastra CX gateway/multiplexer devices carrying converged voice-over-data traffic across WAN circuits at enterprise or telco access sites. Engineers can download the CXGwMux-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CXGwMux-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Aastra ConvertedX (CX) gateway/multiplexer device
Monitoring Examples
An operator would poll gmfState to confirm the multiplexer function is operationally up, then watch gmfCntInfoMsgRelFromBus and gmfCntInfoMsgRelFromWan to compare message throughput in each direction; a growing imbalance can indicate a stalled link. gmfCntUnexpLinkNoFromWan rising unexpectedly signals link-number desynchronization between endpoints, a common precursor to dropped calls or data errors. gmfVoiceOverDataPriorityFactor and gmfOutputFlowControlFactor would be checked when voice quality issues are reported, to confirm voice traffic is still being prioritized correctly over data.
What Can Be Monitored
- multiplexer operational state
- bus-to-WAN message relay counts
- unexpected link number errors from WAN
- voice-over-data priority factor
- output flow control factor
- acknowledgment counters to WAN
This MIB depends on
Related MIBs
Imported Objects
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| gmfConfig | 1.3.6.1.4.1.495.2.1.6.5.1 | |||
| INT gmfMuxInterPassPeriodInMs | 1.3.6.1.4.1.495.2.1.6.5.1.1 | INTEGER | read-write | Determines the minimum period in milliseconds between the muxing of queued frames. Range of Values: 1-500 Default Value: 10 Configuration Changed: operative |
| INT gmfVoiceOverDataPriorityFactor | 1.3.6.1.4.1.495.2.1.6.5.1.2 | INTEGER | read-write | Determines the maximum number of compressed voice-type frames that can be muxed in sequence before a compressed data-type frame must be muxed. Range of Values: 1 - 1,000 Default Value: 1,000 Configuration Changed: operative |
| INT gmfStatSamplingPeriod | 1.3.6.1.4.1.495.2.1.6.5.1.3 | INTEGER | read-write | Determines the maximum duration in seconds for statistical sampling. Resetting this sampling window to a different value zeroes the objects gmfLinkUtilizationTx, gmfLinkUtilizationRx and gmfLinkErrorRate to begin a fresh sample. Range of Values: 0 - 3,600 Default Value: 3,600 Configuration Changed: operative |
| INT gmfNoOfLinkSupported | 1.3.6.1.4.1.495.2.1.6.5.1.4 | INTEGER | read-write | Determines the number of virtual circuits that the GMF software layer currently supports for compressed voice/data traffic. If '0', voice/data traffic is disabled. If '1', then that one voice/data link will be numbered Link Number 1. If '5', then voice/data links one through five will be numbered Link Number 1, Link Number 2, Link Number 3, Link Number 4 and Link Number 5, respectively. 'gmfLink' uses the numbers assigned to these virtual circuits. Range of Values: 0 - 1,024 Default Value: 0 Configuration Changed: administrative |
| INT gmfNoOfEntryPerFiFo | 1.3.6.1.4.1.495.2.1.6.5.1.5 | INTEGER | read-write | Determines the maximum number of voice/data entries that the queueing controller (FIFO) in system memory can handle. Range of Values: 32 - 10,000 Default Value: 256 Configuration Changed: administrative |
| INT gmfToFrCouplingLevel | 1.3.6.1.4.1.495.2.1.6.5.1.6 | INTEGER | read-write | Not currently used. |
| INT gmfOutputFlowControlFactor | 1.3.6.1.4.1.495.2.1.6.5.1.7 | INTEGER | read-write | Determines the extent to which the GMF software layer slows down compressed data (but not compressed voice) traffic from a Data Compression module (if present) after being notified of congestion by the Frame Relay software layer. Range of Values: 1 - 10 (10 = slowest) Default Value: 1 Configuration Changed: operative |
| INT gmfState | 1.3.6.1.4.1.495.2.1.6.5.1.8 | INTEGER | read-only | Indicates the state of the GMF software layer at initialization. Report abnormal value to Memotec Service Department. Options: dead (1): CX900/CX1000 abnormal gmf-task-conf (2): CX900/CX1000 abnormal general-conf (3): CX900/CX1000 abnormal sap-conf (4): CX900/CX1000 abnormal route-conf (5): CX900/CX1000 abnormal init-gmf-completed (6): CX900/CX1000 abnormal init-appl-completed (7): CX900 normal/CX1000 abnormal mci-only (8): CX900 abnormal/CX1000 CCM only reg-to-iam (9): CX900 abnormal/CX1000 normal Default Value: none |
| CTR gmfCntInfoMsgRelFromBus | 1.3.6.1.4.1.495.2.1.6.5.1.9 | Counter | read-only | Indicates the number of information messages (including Management Console Interface traffic) received from the Token Bus software layer. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfCntInfoMsgRelFromWan | 1.3.6.1.4.1.495.2.1.6.5.1.10 | Counter | read-only | Indicates the number of compressed voice/data messages received from the Frame Relay software layer. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfCntTxAckToWan | 1.3.6.1.4.1.495.2.1.6.5.1.11 | Counter | read-only | Indicates the number of ACKs sent to the Frame Relay software layer. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfCntUnexpLinkNoFromWan | 1.3.6.1.4.1.495.2.1.6.5.1.12 | Counter | read-only | Indicates the number of unexpected DLCIs in message headers received from the Frame Relay software layer. Range of Values: 0-4, 294, 967, 295 Default Value: none |
| CTR gmfCntFrmTooShortFromWan | 1.3.6.1.4.1.495.2.1.6.5.1.13 | Counter | read-only | Indicates the number of short frames received from the Frame Relay software layer and then discarded. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfCntFrmTooLongFromWan | 1.3.6.1.4.1.495.2.1.6.5.1.14 | Counter | read-only | Indicates the number of long frames received from the Frame Relay software layer and then discarded. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfLongestTimeToMux | 1.3.6.1.4.1.495.2.1.6.5.1.15 | Counter | read-only | Indicates the duration in milliseconds for the longest mux pass. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfCntSilentConnections | 1.3.6.1.4.1.495.2.1.6.5.1.16 | Counter | read-only | Indicates the number of connections with the Voice Module (CX 900 only) or with a local AC 600/MC 600/HC 600 (CX 1000 only) that have been dropped by the GMF software layer due to inactivity. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfCntMuxPassTimeExceeded | 1.3.6.1.4.1.495.2.1.6.5.1.17 | Counter | read-only | Not currently used. |
| INT gmfMciCurrentConnection | 1.3.6.1.4.1.495.2.1.6.5.1.18 | INTEGER | read-only | Not currently used. |
| CTR gmfCntInfoMsgRelFromVce | 1.3.6.1.4.1.495.2.1.6.5.1.19 | Counter | read-only | Indicates the number of information messages received from the Voice module (if present). Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfCntGlobalFlowCtlCond | 1.3.6.1.4.1.495.2.1.6.5.1.20 | Counter | read-only | Indicates the number of times that voice/data entries nearly exceeded what the queuing controller (FIFO) in system memory could handle as defined in 'gmfNoOfEntryPerFifo'. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| INT gmfNoOfVoicePacketQueued | 1.3.6.1.4.1.495.2.1.6.5.1.21 | INTEGER | read-write | Determines the maximum number of voice packets that can be buffered before being muxed. Range of Values: 0-8 Default Value: 4 Configuration Changed: operative |
| INT gmfControlStats | 1.3.6.1.4.1.495.2.1.6.5.1.22 | INTEGER | write-only | Clears GMF statistics not related to sampling period. Options: clearStats (1): clear statistics Default Value: none Configuration Changed: operative |
| gmfRouteTable | 1.3.6.1.4.1.495.2.1.6.5.2 | not-accessible | GMF routing table. The table maintains a row per slot source (i.e. 16 possible rows for the CX 1000 chassis) and GMF link number. This table is has no meaning for voice stations that use the voice switching option. | |
| gmfRouteEntry | 1.3.6.1.4.1.495.2.1.6.5.2.1 | not-accessible | Each row associates a slot destination number for each possible route number with a specific . combination. | |
| INT gmfOrigin | 1.3.6.1.4.1.495.2.1.6.5.2.1.1 | INTEGER | read-only | Indicates the slot in the chassis occupied by a CPU card sending compressed voice/data packets. Range of Values: 1-16 Default Value: none Configuration Changed: administrative |
| INT gmfLink | 1.3.6.1.4.1.495.2.1.6.5.2.1.2 | INTEGER | read-only | Indicates a valid route number established in 'gmfNoOfLinkSupported' that is used by the Voice/Data Compression module to send compressed voice/data packets to the Frame Relay software layer. Range of Values: 1-48 Default Value: none Configuration Changed: administrative |
| INT gmfDest | 1.3.6.1.4.1.495.2.1.6.5.2.1.3 | INTEGER | read-write | Determines the slot in an equivalent chassis across the network occupied by a CPU card receiving compressed voice/data packets. Range of Values: 1-16 Default Value: undefined Configuration Changed: operative |
| INT gmfRouteRowStatus | 1.3.6.1.4.1.495.2.1.6.5.2.1.4 | INTEGER | read-write | Determines whether this slot/route combination is to be deleted from the GMF software layer. Options: invalid (1): Row is deleted from the table immediately, however values are still in effect until the next reset. valid (2): Use this value to add a new row to the table, or modify an existing row. Default Value: none Configuration Changed: administrative |
| gmfLinkStatTable | 1.3.6.1.4.1.495.2.1.6.5.3 | not-accessible | GMF links statistics table. The table maintains a row per link. | |
| gmfLinkStatEntry | 1.3.6.1.4.1.495.2.1.6.5.3.1 | not-accessible | Each row contains the state variables and general counters associated with a particular link. | |
| INT gmfLinkIndex | 1.3.6.1.4.1.495.2.1.6.5.3.1.1 | INTEGER | read-only | Indicates the row containing objects for monitoring the virtual circuit. Range of Values: 1 - 48 Default Value: none |
| INT gmfLinkStatus | 1.3.6.1.4.1.495.2.1.6.5.3.1.2 | INTEGER | read-only | Indicates the virtual circuit's current state. Options: down (1): circuit is down init (2): circuit is initializing up (3): circuit is up Default Value: none |
| INT gmfLinkType | 1.3.6.1.4.1.495.2.1.6.5.3.1.3 | INTEGER | read-only | Indicates routing of virtual circuit from GMF software layer. Options: bound-to-FR (1): direct to Frame Relay module routed-to-IAM (2): direct to Inter-Application module in-loopback (3): looped back to Token Bus module or Voice module (if present) Default Value: none |
| CTR gmfCntDataFrmMx | 1.3.6.1.4.1.495.2.1.6.5.3.1.4 | Counter | read-only | Indicates the number of data frames that have been muxed since the last power up or since 'gmfControlStats' was set to 'clearStats'. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfCntDataFrmDmx | 1.3.6.1.4.1.495.2.1.6.5.3.1.5 | Counter | read-only | Indicates the number of data frames that have been demuxed since the last power up or since 'gmfControlStats' was set to 'clearStats'. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfCntVoiceFrmMx | 1.3.6.1.4.1.495.2.1.6.5.3.1.6 | Counter | read-only | Indicates the number of voice frames that have been muxed since the last power up or since 'gmfControlStats' was set to 'clearStats'. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfCntVoiceFrmDmx | 1.3.6.1.4.1.495.2.1.6.5.3.1.7 | Counter | read-only | Indicates the number of compressed voice frames that have been demuxed since the last power up or since 'gmfControlStats' was set to 'clearStats'. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfCntLinkDown | 1.3.6.1.4.1.495.2.1.6.5.3.1.8 | Counter | read-only | Indicates the number of notifications received from the Frame Relay software layer that the PVC has been down since the last power up or since 'gmfControlStats' was set to 'clearStats'. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfLinkUtilizationTx | 1.3.6.1.4.1.495.2.1.6.5.3.1.9 | Counter | read-only | Indicates the transfer rate in bits per second of data moving from the local Voice/Data Compression module to the Frame Relay module within the last sampling period. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfLinkUtilizationRx | 1.3.6.1.4.1.495.2.1.6.5.3.1.10 | Counter | read-only | Indicates the transfer rate in bits per second of data moving from the Frame Relay module to the local Voice/Data Compression module within the last sampling period. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfLinkErrorRate | 1.3.6.1.4.1.495.2.1.6.5.3.1.11 | Counter | read-only | Indicates the number of sequence errors occurring within the last sampling period on the virtual circuit between the GMF and the Frame Relay software layers. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfCntInFlowCtrlMuxSide | 1.3.6.1.4.1.495.2.1.6.5.3.1.12 | Counter | read-only | Indicates the number of times the GMF software layer has notified the Voice/Data Compression module to slow its traffic. This value is zeroed when 'gmfControlStats' is set to 'clearStats'. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfCntOutFlowCtrlWanSide | 1.3.6.1.4.1.495.2.1.6.5.3.1.13 | Counter | read-only | Indicates the number of times the GMF software layer has slowed its muxing of data traffic due to messages received from the Frame Relay software layer with the BECN bit set. This value is zeroed when 'gmfControlStats' is set to 'clearStats'. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfCntSeqErrorFromMux | 1.3.6.1.4.1.495.2.1.6.5.3.1.14 | Counter | read-only | Indicates the number of times the GMF software layer detected sequence errors in the data stream coming from the Voice/Data Compression module since the last power up or since 'gmfControlStats' was set to 'clearStats'. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfCntSeqErrorFromWan | 1.3.6.1.4.1.495.2.1.6.5.3.1.15 | Counter | read-only | Indicates the number of times the GMF software layer detected sequence errors in the data stream coming from the Frame Relay software layer since the last power up or since 'gmfControlStats' was set to 'clearStats'. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfCntSilentLink | 1.3.6.1.4.1.495.2.1.6.5.3.1.16 | Counter | read-only | Indicates whether the GMF software layer detected a silence on the virtual circuit between the GMF and Frame Relay software layer since the last power up or since 'gmfControlStats' was set to 'clearStats'. Options: false: silence not detected true: silence detected Default Value: false |
| CTR gmfCntSeqErrorForced | 1.3.6.1.4.1.495.2.1.6.5.3.1.17 | Counter | read-only | Indicates the number of times the GMF software layer forced a sequence error in a message to the Frame Relay software layer since the last power up or since 'gmfControlStats' was set to 'clearStats'. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfCntUnexpLoopBack | 1.3.6.1.4.1.495.2.1.6.5.3.1.18 | Counter | read-only | Not currently used. |
| CTR gmfCntRemoteRestarted | 1.3.6.1.4.1.495.2.1.6.5.3.1.19 | Counter | read-only | Not currently used. |
| CTR gmfCntVoiceMuxInterrupted | 1.3.6.1.4.1.495.2.1.6.5.3.1.20 | Counter | read-only | Indicates the number of times the GMF software layer stopped muxing current voice traffic to allow for muxing of data traffic in accordance with the 'gmfVoiceOverDataPriorityFactor' since the last power up or since 'gmfControlStats' was set to 'clearStats'. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfCntDataQueueFull | 1.3.6.1.4.1.495.2.1.6.5.3.1.21 | Counter | read-only | Indicates the number of times that data entries exceeded the capacity of the queueing controller (FIFO) in system memory since the last power up or since 'gmfControlStats' was set to 'clearStats'. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfCntVoiceQueueFull | 1.3.6.1.4.1.495.2.1.6.5.3.1.22 | Counter | read-only | Indicates the number of times that voice entries exceeded the capacity of the queueing controller (FIFO) in system memory since the last power up or since 'gmfControlStats' was set to 'clearStats'. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfCntUnexpSliceType | 1.3.6.1.4.1.495.2.1.6.5.3.1.23 | Counter | read-only | Indicates the number of times the GMF software layer detected a message of an unexpected type from a Voice/Data Compression module since the last power up or since 'gmfControlStats' was set to 'clearStats'. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfCntRouteChange | 1.3.6.1.4.1.495.2.1.6.5.3.1.24 | Counter | read-only | Indicates the number of times an active routing entry using this virtual circuit has been killed through on-the-fly route changes with 'gmfRouteEntry' since the last power up or since 'gmfControlStats' was set to 'clearStats'. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| CTR gmfCntTooManyCodes | 1.3.6.1.4.1.495.2.1.6.5.3.1.25 | Counter | read-only | Indicates the number of times the GMF software layer received a compressed voice/data packet containing too many codes from the Voice/Data Compression module since the last power up or since 'gmfControlStats' was set to 'clearStats'. Range of Values: 0 - 4, 294,967, 295 Default Value: none |
| CTR gmfCntPosValidation | 1.3.6.1.4.1.495.2.1.6.5.3.1.26 | Counter | read-only | Indicates the number of positive validations the GMF software layer has sent the Voice/Data Compression module since the last power up or since 'gmfControlStats' was set to 'clearStats'. Range of Values: 0 - 4, 294, 967,295 Default Value: none |
| CTR gmfCntNegValidation | 1.3.6.1.4.1.495.2.1.6.5.3.1.27 | Counter | read-only | Indicates the number of negative validations the GMF software layer has sent the Voice/Data Compression module since the last power up or since 'gmfControlStats' was set to 'clearStats'. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| INT gmfControlLink | 1.3.6.1.4.1.495.2.1.6.5.3.1.29 | INTEGER | write-only | Determines whether the GMF software layer puts link in normal mode or in loopback mode. Options: forceNormal (1): puts link in normal mode forceLoopback (2): puts link in loopback mode Default Value: none Configuration Changed: operative |
| INT gmfDataOutWindowWidth | 1.3.6.1.4.1.495.2.1.6.5.3.1.30 | INTEGER | read-write | Determines the width in the transmit window given to data traffic in relation to voice traffic. The lower this value, the more restricted will be the flow of data traffic. Range of Values: 1-16 Default Value: 6 Configuration Changed: operative |
| INT gmfDataOutPriority | 1.3.6.1.4.1.495.2.1.6.5.3.1.31 | INTEGER | read-write | Determines the priority given to outbound data traffic routed through the FRIM software layer. Priority for traffic routed directly through the Frame Relay software layer is controlled with 'frCircuitPriorityLevel'. Range of Values: 1 - 4 (4 is the lowest) Default Value: 1 Configuration Changed: operative |
| gmfSRTable | 1.3.6.1.4.1.495.2.1.6.5.4 | not-accessible | GMF system routing table. The table may contain a row per GMF link i.e. up to 48 rows (currently). | |
| gmfSREntry | 1.3.6.1.4.1.495.2.1.6.5.4.1 | not-accessible | Each row associates an alias and a subref field to a GMF's link. | |
| INT gmfSRLink | 1.3.6.1.4.1.495.2.1.6.5.4.1.1 | INTEGER | read-only | Indicates a valid route number established in 'gmfNoOfLinkSupported' used by the Voice/Data Compression module to send compressed voice/data packets to the Frame Relay software layer. Range of Values: 1 - 1,024 Default Value: none |
| ALI gmfSRDestCircuitAlias | 1.3.6.1.4.1.495.2.1.6.5.4.1.2 | Alias | read-write | Determines the alias of a circuit specified in the Frame Relay software layer that will link with the GMF route. Range of Values: (CX 1000) 0 - 35 alphanumeric characters beginning with a non-numeric character (CX 900) 0 - 16 alphanumeric characters beginning with a non-numeric character Default Value: none Configuration Changed: operative |
| SUB gmfSRSubRef | 1.3.6.1.4.1.495.2.1.6.5.4.1.3 | SubRef | read-write | Determines the reference that one user's segment of traffic will be assigned on the outbound PVC to distinguish it from traffic segments of other users of the same outbound PVC. Range of Values: 1 - 255 Default Value: 1 Configuration Changed: operative |
| INT gmfSRConStatus | 1.3.6.1.4.1.495.2.1.6.5.4.1.4 | INTEGER | read-only | Indicates status of connection on the system route. Options: not-init (1): system route not initialized closed (2): system route closed waitForQueryConf (3): in progress (query confirmed?) waitForOpenConf (4): in progress (opening confirmed?) opened (5): system route opened Default Value: none |
| INT gmfSRFailStatus | 1.3.6.1.4.1.495.2.1.6.5.4.1.5 | INTEGER | read-only | Indicates the reason for a connection failure on a system route prior to the next attempt to establish a connection on that route. Default Value: none Options: noFailure (1): did not fail internalError (2): system error localMemAllocFailure (3): GMF memory allocation error remoteMemAllocFailure (4): FRIM memory allocation error remoteNoAccess (5): FRIM not configured remotePvcDown (6): FRIM reported down remotevcBusy (7): FRIM busy localFcnFailure (8): flow control type unknown to GMF remoteFcnFailure (9): flow control type unknown to FRIM localDsnFailure (10): GMF could not negotiate data size remoteAliasNotFound (11): no PVC for destination alias remoteNoPvcService (12): FRIM not supporting PVC protocol openReqTimeout (13): timeout of open connection request adjaCardReset (14): adjacent CPU reset (CX 1000 only) linkNotSupported (15): system route number not supported |
| INT gmfSRRowStatus | 1.3.6.1.4.1.495.2.1.6.5.4.1.6 | INTEGER | read-write | Determines whether this system route is in service or is to be deleted from the GMF software layer. Options: invalid (1): Row is deleted from the table immediately, however values are still in effect until the next reset. valid (2): Use this value to add a new row to the table, or modify an existing row. Default Value: none Configuration Changed: operative |
RFC description
Manages GMF (Gateway Mux) configuration and statistics for compressed voice/data traffic muxing on network links.
Start monitoring Aastra ConvertedX (CX) gateway/multiplexer (voice/data mux) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.