CXIoHardware-MIB

All MIBs › CXIoHardware-MIB

Category: Vendor: Memotec

Description: Monitors I/O hardware module inventory and operational status on CX Memotec devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CXIoHardware-MIB?

CXIoHardware-MIB is a Memotec/Aastra CX product MIB for monitoring the inventory and operational status of I/O hardware modules (cards and ports) installed in CX Memotec chassis. It exposes administrative and operational tables for I/O cards and ports (cxIoCardAdmTable, cxIoPortAdmTable, cxIoCardOperTable), tracking each card's type, admin configuration, and index-mapped port assignments. This is explicitly a hardware-status MIB: it lets an operator confirm which I/O cards are physically installed and their operational state, and it includes a dedicated trap (cxIoHwCardTypeTrapReport) to notify management stations when a card's detected type changes, such as after a hot-swap or a card failure/replacement. It depends on the vendor's overarching CXProduct-SMI for its OID placement within the broader CX product tree and correlates with chassis/slot conventions used across other CX MIBs. It was deployed on Memotec/Aastra CX600-series multiservice access devices to give operators visibility into card-level hardware inventory and faults. Network engineers evaluating or troubleshooting this functionality can download the CXIoHardware-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CXIoHardware-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Memotec/Aastra CX600-series multiservice access device

Monitoring Examples

Polling cxIoCardAdmTable and cxIoCardOperTable together lets an administrator compare the configured card type against its actual operational state, flagging a card that is administratively enabled but operationally down. The cxIoPortAdmTable indexed by cxIoPortAdmIndex exposes per-port configuration, useful for confirming a port's settings after a card replacement. Receiving a cxIoHwCardTypeTrapReport notification alerts the NMS in real time that a card's detected hardware type has changed, typically indicating a technician swapped in a different or faulty module.

What Can Be Monitored

I/O card inventory and type
card administrative vs operational state
per-port configuration
card type change events/traps

Imported Objects

From CXProduct-SMI

Alias
cxIoHardware	OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF cxIoHwCardTypeTrap	1.3.6.1.4.1.495.2.1.5.2.0.1			Indicates that a mismatch exists between the configured card type and card type detected in the slot by the software. A trap is also produced if the slot is empty. Related Objects: cxIoCardOperPhysSlot cxIoCardOperState, cxIoCardOperType
cxIoCardAdmTable	1.3.6.1.4.1.495.2.1.5.2.1		not-accessible	Administrative table used to configure the required I/O card hardware.
cxIoCardAdmEntry	1.3.6.1.4.1.495.2.1.5.2.1.1		not-accessible	The parameters required to fully specify the I/O card.
INT cxIoCardAdmIndex	1.3.6.1.4.1.495.2.1.5.2.1.1.1	INTEGER	read-only	Index used for table management only. No other MIB object refers to this index.
INT cxIoCardAdmRowStatus	1.3.6.1.4.1.495.2.1.5.2.1.1.2	INTEGER	read-write	Indicates whether a particular I/O card is configured within the MIB. Options: invalid (1): Deletes an I/O card entry (row) from the MIB table. valid (2): Creates an I/O card entry (row) in the MIB table. disabled (3): No I/O card entries being created or deleted. Default Value: disabled (3) Configuration Changed: operative
ALI cxIoCardAdmAlias	1.3.6.1.4.1.495.2.1.5.2.1.1.3	Alias	read-write	Identifies an alias or alternative name for this card. This alias is recorded in the port administrative table to link it to the correct I/O card. Range of Values: 0 to 35 alphanumeric characters beginning with a non-numeric character Default Value: none Configuration Changed: administrative
INT cxIoCardAdmPhysSlot	1.3.6.1.4.1.495.2.1.5.2.1.1.4	INTEGER	read-write	Identifies the CX1000 I/O slot being configured. Range of Values: 1 - 16 Default Value: none Configuration Changed: administrative
INT cxIoCardAdmType	1.3.6.1.4.1.495.2.1.5.2.1.1.5	INTEGER	read-write	Identifies the type of card that occupies or will occupy this slot. Options: iuscFourPortCard (1): a proprietary I/O card lanCard (2): a LAN adapter such as an Ethernet or Token-Ring card vceCmpCard (3): a voice Compression Card tokenRingCard (4): a Token-Ring I/O card for TL600 ethernetCard (5): an Ethernet I/O card for EL600 isdnCard (6): a T1/E1 ISDN I/O card digitalVceCmpCard (7): a Digital Voice Compression Card ( 15 channels ) highSpeedFr4LIDCard (8): a high speed frame relay 4-LID I/O card octalV34ModemCard (9): an octal V.34 modem I/O card Default Value: none Related Objects: cxIoCardAdmState cxIoCardAdmPhysSlot Configuration Changed: administrative
INT cxIoCardAdmState	1.3.6.1.4.1.495.2.1.5.2.1.1.6	INTEGER	read-only	Indicates whether the card type configured using the cxIoCardAdmType object matches the card inserted in the slot. Options: invalid (1): The configured card type does not match the card inserted in the slot. You must adjust one or the other. valid (2): The configured card typed matches the card inserted in the slot. Related Objects: cxIoCardAdmPhysSlot cxIoCardAdmType
cxIoPortAdmTable	1.3.6.1.4.1.495.2.1.5.2.2		not-accessible	Administrative table used to configure the required I/O port hardware.
cxIoPortAdmEntry	1.3.6.1.4.1.495.2.1.5.2.2.1		not-accessible	The parameters required to fully specify the I/O port.
INT cxIoPortAdmIndex	1.3.6.1.4.1.495.2.1.5.2.2.1.1	INTEGER	read-only	Index used for table management only. No other MIB object refers to this index.
INT cxIoPortAdmRowStatus	1.3.6.1.4.1.495.2.1.5.2.2.1.2	INTEGER	read-write	Indicates whether a particular I/O port is configured within the MIB. Options: invalid (1): Deletes an I/O port entry (row) from the MIB table. valid (2): Creates an I/O port entry (row) in the MIB table. disabled (3): No I/O port entries (rows) created or deleted. Default Value: disabled (3) Configuration Changed: operative
ALI cxIoPortAdmAlias	1.3.6.1.4.1.495.2.1.5.2.2.1.3	Alias	read-write	Specifies an alias or alternative name for this hardware port. This alias is used by the related driver SAP to link it to the correct I/O hardware port. Range of Values: 0 to 35 alphanumeric characters beginning with a non-numeric character Default Value: none Configuration Changed: administrative
ALI cxIoPortAdmCardAlias	1.3.6.1.4.1.495.2.1.5.2.2.1.4	Alias	read-write	Specifies the alias of the I/O card containing this port. Range of Values: 0 to 35 alphanumeric characters beginning with a non-numeric character Default Value: none Related Objects: cxIoCardAdmAlias Configuration Changed: administrative
INT cxIoPortAdmCardLocalIndex	1.3.6.1.4.1.495.2.1.5.2.2.1.5	INTEGER	read-write	Defines this port's position on the I/O card. This information is presented as an index. Note: To move to a different port on an I/O card, you need only change this value. Range of Values: Dependent on I/O card type Configuration Changed: administrative
cxIoCardOperTable	1.3.6.1.4.1.495.2.1.5.2.3		not-accessible	Table describing what the software detects at each I/O slot on this CPU card
cxIoCardOperEntry	1.3.6.1.4.1.495.2.1.5.2.3.1		not-accessible	Contains all parameters describing the detected I/O cards. The rows in this table are always defined since they cannot be created or deleted. The number of rows represents the maximum number of I/O cards a CPU card can support. For the current CX1000 chassis, eight I/O slots are available. The cxIoCardOperState object determines whether the I/O slot is occupied by an I/O card. The table index corresponds to the physical slot number of the chassis. From the current I/O-to-CPU slot relation defined, the first index in this table is equal to the CPU card slot number. The last index in this table is the CPU card slot number plus 7. Entries for which no corresponding slot number exists in the chassis are not defined. For example, on a CPU card using slot 14, the I/O card index ranges from 14 to 21; however, the entries related to slot numbers 18 to 21 will not be used since no such slots exist.
INT cxIoCardOperPhysSlot	1.3.6.1.4.1.495.2.1.5.2.3.1.1	INTEGER	read-only	Identifies the CX1000 I/O slot being described.
INT cxIoCardOperState	1.3.6.1.4.1.495.2.1.5.2.3.1.2	INTEGER	read-only	Indicates whether the particular I/O card is physically present.
INT cxIoCardOperType	1.3.6.1.4.1.495.2.1.5.2.3.1.3	INTEGER	read-only	Identifies the type of card occupying this slot. This information is detected by the CX1000. Options: iuscFourPortCard (1): a proprietary I/O card lanCard (2): a LAN adapter such as an Ethernet or Token-Ring card for CL600 vceCmpCard (3): a voice Compression Card tokenRingCard (4): a Token-Ring I/O card for TL600 ethernetCard (5): an Ethernet I/O card for EL600 isdnCard (6): a T1/E1 ISDN I/O card digitalVceCmpCard (7): a Digital Voice Compression Card ( 15 channels ) highSpeedFr4LIDCard (8): a high speed frame relay 4-LID I/O card octalV34ModemCard (9): an octal V.34 modem I/O card other (255): none of the above.
INT cxIoCardOperRevision	1.3.6.1.4.1.495.2.1.5.2.3.1.4	INTEGER	read-only	The revision number read from the I/O card ID register.
INT cxIoCardOperAssemblyAndEco	1.3.6.1.4.1.495.2.1.5.2.3.1.5	INTEGER	read-only	The assembly and ECO numbers read from the I/O card assembly and ECO registers.
INT cxIoCardOperSpecialEco	1.3.6.1.4.1.495.2.1.5.2.3.1.6	INTEGER	read-only	The special ECO number read from the I/O card special ECO register.
INT cxIoHwCardTypeTrapReport	1.3.6.1.4.1.495.2.1.5.2.4	INTEGER	read-write	Indicates whether a mismatch between the value of the cxIoCardAdmType object (the configured card type) and the physical card inserted in the slot should generate a cxIoHwCardTypeTrap. Options: disabled (1): No action taken when a mismatch is detected. enabled (2): Generates a 'cxIoHwCardTypeTrap' when a mismatch is detected. Default Value: disabled (1) Related Objects: cxIoHwCardTypeTrap cxIoCardAdmType cxIoCardOperType Configuration Changed: administrative
INT cxIHMibLevel	1.3.6.1.4.1.495.2.1.5.2.5	INTEGER	read-only	Used to determine current MIB module release supported by the agent. Object is in decimal.

RFC description

Ciena CX I/O card hardware administrative configuration and state management.

Start monitoring Memotec/Aastra multiservice access devices with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CXIoHardware-MIB

What Is CXIoHardware-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description