CM-ALARM-MIB

All MIBs › CM-ALARM-MIB

Organization: ADVA Optical Networking

Last Updated: 2015-12-21

Category: Alarm and Event Management

Description: Defines alarm monitoring MIB objects used by ADVA FSP150CM/CC product lines for managing and reporting network equipment alarms.

IPNetwork Monitor uses several OIDs from this MIB in network discovery and polling the applicable devices. Start monitoring CM-ALARM-MIB with a free 30-day trial of IPNetwork Monitor.

What Is CM-ALARM-MIB?

This MIB, from ADVA Optical Networking, defines alarm-monitoring objects for the FSP150CM/CC ("F3") family of optical transport/carrier Ethernet network elements. It exposes fault-management data: a system alarm table listing active alarms with notification code, alarm type, service-affecting status, time raised, and physical/logical location, plus a facility for triggering test alarms. Its central purpose is fault and status monitoring, letting an NMS see current equipment or facility alarms, whether each alarm is service-affecting, its direction (e.g., near-end/far-end), and when it was raised, which is critical for tracking hardware faults such as line/port failures on the optical transport gear. As an alarm/notification-oriented MIB it is generally deployed together with ADVA's broader FSP150 equipment and interface MIBs that expose the underlying hardware inventory and status those alarms refer to. It is used in carrier/service-provider optical networks running ADVA FSP150CM/CC network elements. Engineers can download the CM-ALARM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CM-ALARM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ADVA FSP150CM/CC optical/carrier Ethernet network element

Monitoring Examples

Polling cmSysAlmTable returns each active cmSysAlmEntry with cmSysAlmNotifCode and cmSysAlmType identifying the fault condition, cmSysAlmSrvEff flagging whether the alarm is service-affecting, and cmSysAlmLocation/cmSysAlmDirection pinpointing which port or direction raised it. cmAlmLastChange lets a poller detect when the alarm table has changed since the last check without re-walking the whole table. The cmAlmTestAlarmEntity/cmAlmTestAlarmAction objects allow an operator to inject a test alarm to verify the NMS's alarm-reception path end-to-end.

What Can Be Monitored

active system alarms
alarm type and notification code
service-affecting status
alarm location/direction
alarm raised time
alarm table change indicator

Imported Objects

From ADVA-MIB

TrapAlarmSeverity
fsp150cm	OBJECT-IDENTITY

From CM-ENTITY-MIB

neIndex	OBJECT-TYPE
shelfIndex	OBJECT-TYPE
slotIndex	OBJECT-TYPE

From CM-FACILITY-MIB

cmEthernetAccPortIndex	OBJECT-TYPE
cmEthernetNetPortIndex	OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DateAndTime
DisplayString
TEXTUAL-CONVENTION
TimeStamp
TruthValue
VariablePointer

OIDs

OID symbolic	OID numeric	Type	Access	Description
alarmConformance	1.3.6.1.4.1.2544.1.12.6.3
alarmNotifications	1.3.6.1.4.1.2544.1.12.6.2
alarmObjects	1.3.6.1.4.1.2544.1.12.6.1
cmAlarmMIB	1.3.6.1.4.1.2544.1.12.6			This module defines the Alarm Monitoring MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
cmAlarmScalars	1.3.6.1.4.1.2544.1.12.6.1.1
CMC cmAlarmSeverityAssignmentCondType	1.3.6.1.4.1.2544.1.12.6.1.6.1.2	CmConditionType	read-only	This object identifies the type of the condition.
CMD cmAlarmSeverityAssignmentDirection	1.3.6.1.4.1.2544.1.12.6.1.6.1.6	CmDirection	read-only	This object identifies the direction of the condition. The value none(0) should be used if direction is not applicable.
CMA cmAlarmSeverityAssignmentEntityType	1.3.6.1.4.1.2544.1.12.6.1.6.1.1	CmAlarmEntityType	read-only	Alarm Severity Assignment Entity Type.
cmAlarmSeverityAssignmentEntry	1.3.6.1.4.1.2544.1.12.6.1.6.1		not-accessible	A list of parameters that set up the alarm severity assignment profiles.
CML cmAlarmSeverityAssignmentLocation	1.3.6.1.4.1.2544.1.12.6.1.6.1.4	CmLocation	read-only	This object identifies the location of the condition. The value none(0) is used if location is not applicable.
TRA cmAlarmSeverityAssignmentNotifCode	1.3.6.1.4.1.2544.1.12.6.1.6.1.5	TrapAlarmSeverity	read-write	This object allows configuration of the severity of the condition.
CMS cmAlarmSeverityAssignmentSrvEff	1.3.6.1.4.1.2544.1.12.6.1.6.1.3	CmServiceEffect	read-only	This object identifies whether the condition is service affecting or not.
cmAlarmSeverityAssignmentTable	1.3.6.1.4.1.2544.1.12.6.1.6		not-accessible	A list of configurable alarm severity assignment entries for Enterprise MIB Alarm Conditions.
cmAlmCompliance	1.3.6.1.4.1.2544.1.12.6.3.1.1			Describes the requirements for conformance to the Alarm Condition Services.
cmAlmCompliances	1.3.6.1.4.1.2544.1.12.6.3.1
cmAlmGroups	1.3.6.1.4.1.2544.1.12.6.3.2
I32 cmAlmIndex	1.3.6.1.4.1.2544.1.12.6.1.1.2	Integer32	read-only	This value is assigned globally and sequentially to each new trap that is sent from the device. When this value reaches a maximum of 65535, it is wrapped to the value 1.
TIM cmAlmLastChange	1.3.6.1.4.1.2544.1.12.6.1.1.1	TimeStamp	read-only	A snapshot of the value of sysUpTime when the alarm situation last changed on the node (ie. there was a raise or clear). This value is reset to zero when the agent initializes.
cmAlmNotifGroup	1.3.6.1.4.1.2544.1.12.6.3.2.2			A collection of notifications related to alarm conditions/threshold Services.
cmAlmObjectGroup	1.3.6.1.4.1.2544.1.12.6.3.2.1			A collection of objects used to manage the Alarm conditions/threshold Services.
TES cmAlmTestAlarmAction	1.3.6.1.4.1.2544.1.12.6.1.1.4	TestAlarmAction	read-write	This object can be used to raise/clear the testalarm on the entity specified by cmAlmTestAlarmEntity.
NUM cmAlmTestAlarmEntity	1.3.6.1.4.1.2544.1.12.6.1.1.3	VariablePointer	read-write	This object is used to specify the entity for which the test alarm is raised/cleared. This entity can be OID of a card(unit) or a port (Ethernet Access or Ethernet Network). The test alarm is the trap cmNetworkElementAlmTrap with condition type as testalarm. If not specified, the value of this object is 0.0.
STR cmNetworkElementAlmAdditionalInfoName	1.3.6.1.4.1.2544.1.12.6.1.4.1.11	DisplayString	read-only	This object provides name of the associated entity to which the alarm pertains. If there is no such entity, this value is empty.
NUM cmNetworkElementAlmAdditionalInfoObject	1.3.6.1.4.1.2544.1.12.6.1.4.1.10	VariablePointer	read-only	This object provides OID of associated entity that caused the alarm. If there is no associated entity, this value is 0.0.
CMC cmNetworkElementAlmDescr	1.3.6.1.4.1.2544.1.12.6.1.4.1.7	CmConditionDescr	read-only	This object contains a text description of the condition.
CMD cmNetworkElementAlmDirection	1.3.6.1.4.1.2544.1.12.6.1.4.1.6	CmDirection	read-only	This object identifies the direction of the condition. The value none(0) should be used if direction is not applicable.
cmNetworkElementAlmEntry	1.3.6.1.4.1.2544.1.12.6.1.4.1		not-accessible	An entry containing information applicable to a particular condition.
CML cmNetworkElementAlmLocation	1.3.6.1.4.1.2544.1.12.6.1.4.1.5	CmLocation	read-only	This object identifies the location of the condition. The value none(0) should be used if location is not applicable.
TRA cmNetworkElementAlmNotifCode	1.3.6.1.4.1.2544.1.12.6.1.4.1.1	TrapAlarmSeverity	read-only	This object identifies the severity of the condition.
NUM cmNetworkElementAlmObject	1.3.6.1.4.1.2544.1.12.6.1.4.1.8	VariablePointer	read-only	OID of the actual object that raised the alarm.
STR cmNetworkElementAlmObjectName	1.3.6.1.4.1.2544.1.12.6.1.4.1.9	DisplayString	read-only	Symbolic name of the managed object to which the condition pertains. This object can be any interface on this device or the system object. If this is an interface, this name will be same as ifName (IF-MIB).
CMS cmNetworkElementAlmSrvEff	1.3.6.1.4.1.2544.1.12.6.1.4.1.3	CmServiceEffect	read-only	This object identifies whether the condition is service affecting or not.
cmNetworkElementAlmTable	1.3.6.1.4.1.2544.1.12.6.1.4		not-accessible	A list of entries corresponding to the standing conditions that exist at the system level. Entries cannot be created in this table by management application action.
DAT cmNetworkElementAlmTime	1.3.6.1.4.1.2544.1.12.6.1.4.1.4	DateAndTime	read-only	This object contains the system time when the condition occurred.
NTF cmNetworkElementAlmTrap	1.3.6.1.4.1.2544.1.12.6.2.2			This trap is sent each time an alarm condition is raised and inserted into to the cmNetworkElementAlmTable. It is also sent each time an alarm condition is cleared and removed from the cmNetworkElementAlmTable.
CMC cmNetworkElementAlmType	1.3.6.1.4.1.2544.1.12.6.1.4.1.2	CmConditionType	read-only	This object identifies the type of the condition.
STR cmNetworkElementCondAdditionalInfoName	1.3.6.1.4.1.2544.1.12.6.1.5.1.13	DisplayString	read-only	This object provides name of the associated entity to which the alarm pertains. If there is no such entity, this value is empty.
NUM cmNetworkElementCondAdditionalInfoObject	1.3.6.1.4.1.2544.1.12.6.1.5.1.12	VariablePointer	read-only	This object provides OID of associated entity that caused the alarm. If there is no associated entity, this value is 0.0.
CMC cmNetworkElementCondDescr	1.3.6.1.4.1.2544.1.12.6.1.5.1.8	CmConditionDescr	read-only	This object contains a text description of the condition.
CMD cmNetworkElementCondDirection	1.3.6.1.4.1.2544.1.12.6.1.5.1.7	CmDirection	read-only	This object identifies the direction of the condition. The value none(0) should be used if direction is not applicable.
CMC cmNetworkElementCondEffType	1.3.6.1.4.1.2544.1.12.6.1.5.1.11	CmCondEffectType	read-only	This object contains the condition effect type.
cmNetworkElementCondEntry	1.3.6.1.4.1.2544.1.12.6.1.5.1		not-accessible	An entry containing information applicable to a particular condition.
I32 cmNetworkElementCondIndex	1.3.6.1.4.1.2544.1.12.6.1.5.1.1	Integer32	read-only	An integer index value used to uniquely identify a standing condition at a Network Element level.
CML cmNetworkElementCondLocation	1.3.6.1.4.1.2544.1.12.6.1.5.1.6	CmLocation	read-only	This object identifies the location of the condition. The value none(0) should be used if location is not applicable.
TRA cmNetworkElementCondNotifCode	1.3.6.1.4.1.2544.1.12.6.1.5.1.2	TrapAlarmSeverity	read-only	This object identifies the severity of the condition.
NUM cmNetworkElementCondObject	1.3.6.1.4.1.2544.1.12.6.1.5.1.9	VariablePointer	read-only	Symbolic name of the managed object to which the condition pertains. This object can be any interface on this device or the system object. If this is an interface, this name will be same as ifName (IF-MIB).
STR cmNetworkElementCondObjectName	1.3.6.1.4.1.2544.1.12.6.1.5.1.10	DisplayString	read-only	Symbolic name of the managed object to which the condition pertains. This object can be any interface on this device or the system object. If this is an interface, this name will be same as ifName (IF-MIB).
CMS cmNetworkElementCondSrvEff	1.3.6.1.4.1.2544.1.12.6.1.5.1.4	CmServiceEffect	read-only	This object identifies whether the condition is service affecting or not.
cmNetworkElementCondTable	1.3.6.1.4.1.2544.1.12.6.1.5		not-accessible	A list of entries corresponding to the standing conditions that exist at the system level. Entries cannot be created in this table by management application action.
DAT cmNetworkElementCondTime	1.3.6.1.4.1.2544.1.12.6.1.5.1.5	DateAndTime	read-only	This object contains the system time when the condition occurred.
CMC cmNetworkElementCondType	1.3.6.1.4.1.2544.1.12.6.1.5.1.3	CmConditionType	read-only	This object identifies the type of the condition.
NTF cmNetworkElementEvent	1.3.6.1.4.1.2544.1.12.6.2.4			This trap is sent each time an event condition is raised and inserted into to the cmNetworkElementCondTable. It is also sent each time an event condition is cleared and removed from the cmNetworkElementCondTable. Standing conditions/transient conditions are reported using this notification.
STR cmSysAlmAdditionalInfoName	1.3.6.1.4.1.2544.1.12.6.1.2.1.11	DisplayString	read-only	This object provides name of the associated entity to which the alarm pertains. If there is no such entity, this value is empty.
NUM cmSysAlmAdditionalInfoObject	1.3.6.1.4.1.2544.1.12.6.1.2.1.10	VariablePointer	read-only	This object provides OID of associated entity that caused the alarm. If there is no associated entity, this value is 0.0.
CMC cmSysAlmDescr	1.3.6.1.4.1.2544.1.12.6.1.2.1.7	CmConditionDescr	read-only	This object contains a text description of the condition.
CMD cmSysAlmDirection	1.3.6.1.4.1.2544.1.12.6.1.2.1.6	CmDirection	read-only	This object identifies the direction of the condition. The value none(0) should be used if direction is not applicable.
cmSysAlmEntry	1.3.6.1.4.1.2544.1.12.6.1.2.1		not-accessible	An entry containing information applicable to a particular condition.
CML cmSysAlmLocation	1.3.6.1.4.1.2544.1.12.6.1.2.1.5	CmLocation	read-only	This object identifies the location of the condition. The value none(0) should be used if location is not applicable.
TRA cmSysAlmNotifCode	1.3.6.1.4.1.2544.1.12.6.1.2.1.1	TrapAlarmSeverity	read-only	This object identifies the severity of the condition.
NUM cmSysAlmObject	1.3.6.1.4.1.2544.1.12.6.1.2.1.8	VariablePointer	read-only	OID of the actual object that raised the alarm.
STR cmSysAlmObjectName	1.3.6.1.4.1.2544.1.12.6.1.2.1.9	DisplayString	read-only	Symbolic name of the managed object to which the condition pertains.
CMS cmSysAlmSrvEff	1.3.6.1.4.1.2544.1.12.6.1.2.1.3	CmServiceEffect	read-only	This object identifies whether the condition is service affecting or not.
cmSysAlmTable	1.3.6.1.4.1.2544.1.12.6.1.2		not-accessible	A list of entries corresponding to the standing conditions that exist at the system level. Entries cannot be created in this table by management application action.
DAT cmSysAlmTime	1.3.6.1.4.1.2544.1.12.6.1.2.1.4	DateAndTime	read-only	This object contains the system time when the condition occurred.
NTF cmSysAlmTrap	1.3.6.1.4.1.2544.1.12.6.2.1			This trap is sent each time an alarm condition is raised and inserted into to the cmSysAlmTable. It is also sent each time an alarm condition is cleared and removed from the cmSysAlmTable.
CMC cmSysAlmType	1.3.6.1.4.1.2544.1.12.6.1.2.1.2	CmConditionType	read-only	This object identifies the type of the condition.
STR cmSysCondAdditionalInfoName	1.3.6.1.4.1.2544.1.12.6.1.3.1.13	DisplayString	read-only	This object provides name of the associated entity to which the condition pertains. If there is no such entity, this value is empty.
NUM cmSysCondAdditionalInfoObject	1.3.6.1.4.1.2544.1.12.6.1.3.1.12	VariablePointer	read-only	This object provides OID of associated entity that caused the condition. If there is no associated entity, this value is 0.0.
CMC cmSysCondDescr	1.3.6.1.4.1.2544.1.12.6.1.3.1.8	CmConditionDescr	read-only	This object contains a text description of the condition.
CMD cmSysCondDirection	1.3.6.1.4.1.2544.1.12.6.1.3.1.7	CmDirection	read-only	This object identifies the direction of the condition. The value none(0) should be used if direction is not applicable.
CMC cmSysCondEffType	1.3.6.1.4.1.2544.1.12.6.1.3.1.9	CmCondEffectType	read-only	This object contains the condition effect type.
cmSysCondEntry	1.3.6.1.4.1.2544.1.12.6.1.3.1		not-accessible	An entry containing information applicable to a particular condition.
I32 cmSysCondIndex	1.3.6.1.4.1.2544.1.12.6.1.3.1.1	Integer32	read-only	An integer index value used to uniquely identify a standing condition at the system level.
CML cmSysCondLocation	1.3.6.1.4.1.2544.1.12.6.1.3.1.6	CmLocation	read-only	This object identifies the location of the condition. The value none(0) should be used if location is not applicable.
TRA cmSysCondNotifCode	1.3.6.1.4.1.2544.1.12.6.1.3.1.2	TrapAlarmSeverity	read-only	This object identifies the severity of the condition.
NUM cmSysCondObject	1.3.6.1.4.1.2544.1.12.6.1.3.1.10	VariablePointer	read-only	OID of the actual object that raised the condition.
STR cmSysCondObjectName	1.3.6.1.4.1.2544.1.12.6.1.3.1.11	DisplayString	read-only	Symbolic name of the managed object to which the condition pertains.
CMS cmSysCondSrvEff	1.3.6.1.4.1.2544.1.12.6.1.3.1.4	CmServiceEffect	read-only	This object identifies whether the condition is service affecting or not.
cmSysCondTable	1.3.6.1.4.1.2544.1.12.6.1.3		not-accessible	A list of entries corresponding to the standing conditions that exist at the system level. Entries cannot be created in this table by management application action.
DAT cmSysCondTime	1.3.6.1.4.1.2544.1.12.6.1.3.1.5	DateAndTime	read-only	This object contains the system time when the condition occurred.
CMC cmSysCondType	1.3.6.1.4.1.2544.1.12.6.1.3.1.3	CmConditionType	read-only	This object identifies the type of the condition.
NTF cmSysEvent	1.3.6.1.4.1.2544.1.12.6.2.3			This trap is sent each time an event condition is raised and inserted into to the cmSysCondTable. It is also sent each time an event condition is cleared and removed from the cmSysCondTable. Standing conditions/transient conditions are reported using this notification.
T/F f3EnvAlarmInputAlmHoldOffEnabled	1.3.6.1.4.1.2544.1.12.6.1.7.1.6	TruthValue	read-write	This object allows enabling/disabling of alarm hold off for this environmental alarm. When 'disabled', the standard alarm hold off (2.5seconds) does not hold, i.e. alarms are raised immediately when conditions happen.
CMC f3EnvAlarmInputCondType	1.3.6.1.4.1.2544.1.12.6.1.7.1.3	CmConditionType	read-write	This object allows SNMP management entities to provide the environmental alarm condition associated with the environmental alarm input.
STR f3EnvAlarmInputDescr	1.3.6.1.4.1.2544.1.12.6.1.7.1.2	DisplayString	read-write	This object allows SNMP management entities to provide description to the environmental alarm inputs.
f3EnvAlarmInputEntry	1.3.6.1.4.1.2544.1.12.6.1.7.1		not-accessible	A list of parameters to manage the the environmental alarm inputs.
f3EnvAlarmInputGroup	1.3.6.1.4.1.2544.1.12.6.3.2.3			A collection of objects related to environmental alarm inputs.
I32 f3EnvAlarmInputIndex	1.3.6.1.4.1.2544.1.12.6.1.7.1.1	Integer32	not-accessible	Unique index for each environmental alarm input.
ENV f3EnvAlarmInputMode	1.3.6.1.4.1.2544.1.12.6.1.7.1.5	EnvAlarmInputMode	read-write	This object allows specification of the environmental alarm input mode. When 'disabled', environmental alarms are not raised. Value of 'alarmopen' allows alarm to be raised when environmental alarm dry contacts are opened. Value of 'alarmclosed' allows alarm to be raised when environmental alarm dry contacts are closed.
TRA f3EnvAlarmInputNotifCode	1.3.6.1.4.1.2544.1.12.6.1.7.1.4	TrapAlarmSeverity	read-write	This object allows SNMP management entities to provide the notification code for the environmental alarm input.
f3EnvAlarmInputTable	1.3.6.1.4.1.2544.1.12.6.1.7		not-accessible	A list of configurable Environmental Alarm Inputs.

RFC description

Manages alarm monitoring for ADVA Optical Networking F3 product line (FSP150CM/CC) optical networking equipment.

Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CM-ALARM-MIB

What Is CM-ALARM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description