AcAlarm

All MIBs › AcAlarm

Organization: Audiocodes

Last Updated: 2003-12-18

Category: Alarm and Event Management, Telephony and VoIP, Vendor: AudioCodes

Description: Defines alarm notification structures and severity conventions for AudioCodes equipment, used as the common alarm reporting framework across AudioCodes MIB modules.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is AcAlarm?

AcAlarm is an AudioCodes proprietary MIB (enterprise OID 5003, extending AC-FAULT-TC) implementing fault management across AudioCodes products. Its active-alarm table records sequence number, system uptime, trap OID, date/time, alarm name, textual description, source, severity, event type, probable cause, and up to three additional-info fields for each currently-active alarm, while a parallel alarm-history table retains the same detail for alarms that have since cleared. As a status/notification MIB it lets an administrator retrieve the complete current alarm list via SNMP GET rather than relying solely on traps, and review recent alarm history. It is deployed on AudioCodes media gateway/session-border-controller products. Engineers can download the AcAlarm file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in AcAlarm. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

AudioCodes media gateway/session-border-controller products

Monitoring Examples

An administrator walks acActiveAlarmTable after a monitoring gap to catch up on any alarms an AudioCodes device raised while its trap destination was unreachable.

What Can Be Monitored

active and historical alarm detail

Imported Objects

From AC-FAULT-TC

AcAlarmEventType
AcAlarmProbableCause
AcAlarmSeverity

From SNMP-FRAMEWORK-MIB

SnmpAdminString
SnmpEngineID

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
audioCodes	1.3.6.1.4.1.5003
acFault	1.3.6.1.4.1.5003.11
acAlarm	1.3.6.1.4.1.5003.11.1			This MIB defines the enterprise-specific objects needed to support fault management of Audiocodes products. The MIB consists of: o Active alarm table o Alarm history table o Alarm notification varbinds
acActiveAlarm	1.3.6.1.4.1.5003.11.1.1
acActiveAlarmTable	1.3.6.1.4.1.5003.11.1.1.1		not-accessible	Table of active alarms.
acActiveAlarmEntry	1.3.6.1.4.1.5003.11.1.1.1.1		not-accessible	A conceptual row in the acActiveAlarmTable
U32 acActiveAlarmSequenceNumber	1.3.6.1.4.1.5003.11.1.1.1.1.1	Unsigned32	read-only	The sequence number of the alarm raise trap.
TIM acActiveAlarmSysuptime	1.3.6.1.4.1.5003.11.1.1.1.1.2	TimeStamp	read-only	The value of sysuptime at the time the alarm raise trap was sent
OID acActiveAlarmTrapOID	1.3.6.1.4.1.5003.11.1.1.1.1.3	OBJECT IDENTIFIER	read-only	The OID of the notification trap
DAT acActiveAlarmDateAndTime	1.3.6.1.4.1.5003.11.1.1.1.1.4	DateAndTime	read-only	The date and time at the time the alarm raise trap was sent.
U32 acActiveAlarmName	1.3.6.1.4.1.5003.11.1.1.1.1.5	Unsigned32	read-only	The name of the alarm that was raised. This actually in the form of a number. Each kind of alarm has a unique number associated with it.
STR acActiveAlarmTextualDescription	1.3.6.1.4.1.5003.11.1.1.1.1.6	SnmpAdminString	read-only	Text that descries the alarm condition.
STR acActiveAlarmSource	1.3.6.1.4.1.5003.11.1.1.1.1.7	SnmpAdminString	read-only	The component in the system which raised the alarm.
ACA acActiveAlarmSeverity	1.3.6.1.4.1.5003.11.1.1.1.1.8	AcAlarmSeverity	read-only	The severity of the alarm.
ACA acActiveAlarmEventType	1.3.6.1.4.1.5003.11.1.1.1.1.9	AcAlarmEventType	read-only	The event type of the alarm.
ACA acActiveAlarmProbableCause	1.3.6.1.4.1.5003.11.1.1.1.1.10	AcAlarmProbableCause	read-only	The probable cause of the alarm.
STR acActiveAlarmAdditionalInfo1	1.3.6.1.4.1.5003.11.1.1.1.1.11	SnmpAdminString	read-only	Additional miscellaneous info regarding this alarm.
STR acActiveAlarmAdditionalInfo2	1.3.6.1.4.1.5003.11.1.1.1.1.12	SnmpAdminString	read-only	Additional miscellaneous info regarding this alarm.
STR acActiveAlarmAdditionalInfo3	1.3.6.1.4.1.5003.11.1.1.1.1.13	SnmpAdminString	read-only	Additional miscellaneous info regarding this alarm.
acAlarmHistory	1.3.6.1.4.1.5003.11.1.2
acAlarmHistoryTable	1.3.6.1.4.1.5003.11.1.2.1		not-accessible	A table of all raise-alarm and clear-alarm traps sent by the system. Internal to the system, this table of traps is a fixed size. Once the table reaches this size, older traps are removed to make room for new traps. The size of the table is the value of the nlmConfigLogEntryLimit (NOTIFICATION-LOG-MIB).
acAlarmHistoryEntry	1.3.6.1.4.1.5003.11.1.2.1.1		not-accessible	A conceptual row in the acAlarmHistoryTable
U32 acAlarmHistorySequenceNumber	1.3.6.1.4.1.5003.11.1.2.1.1.1	Unsigned32	read-only	The sequence number of the alarm raise or clear trap.
TIM acAlarmHistorySysuptime	1.3.6.1.4.1.5003.11.1.2.1.1.2	TimeStamp	read-only	The value of sysuptime at the time the alarm raise or clear trap was sent
OID acAlarmHistoryTrapOID	1.3.6.1.4.1.5003.11.1.2.1.1.3	OBJECT IDENTIFIER	read-only	The OID of the notification trap
DAT acAlarmHistoryDateAndTime	1.3.6.1.4.1.5003.11.1.2.1.1.4	DateAndTime	read-only	The date and time at the time the alarm raise or clear trap was sent.
U32 acAlarmHistoryName	1.3.6.1.4.1.5003.11.1.2.1.1.5	Unsigned32	read-only	The name of the alarm that was raised or cleared. This actually in the form of a number. Each kind of alarm has a unique number associated with it.
STR acAlarmHistoryTextualDescription	1.3.6.1.4.1.5003.11.1.2.1.1.6	SnmpAdminString	read-only	Text that descries the alarm condition.
STR acAlarmHistorySource	1.3.6.1.4.1.5003.11.1.2.1.1.7	SnmpAdminString	read-only	The component in the system which raised or cleared the alarm.
ACA acAlarmHistorySeverity	1.3.6.1.4.1.5003.11.1.2.1.1.8	AcAlarmSeverity	read-only	The severity of the alarm. A severity of warning, minor, major or critical indicates a raise trap. A severity of cleared indicates a clear trap.
ACA acAlarmHistoryEventType	1.3.6.1.4.1.5003.11.1.2.1.1.9	AcAlarmEventType	read-only	The event type of the alarm.
ACA acAlarmHistoryProbableCause	1.3.6.1.4.1.5003.11.1.2.1.1.10	AcAlarmProbableCause	read-only	The probable cause of the alarm.
STR acAlarmHistoryAdditionalInfo1	1.3.6.1.4.1.5003.11.1.2.1.1.11	SnmpAdminString	read-only	Additional miscellaneous info regarding this alarm.
STR acAlarmHistoryAdditionalInfo2	1.3.6.1.4.1.5003.11.1.2.1.1.12	SnmpAdminString	read-only	Additional miscellaneous info regarding this alarm.
STR acAlarmHistoryAdditionalInfo3	1.3.6.1.4.1.5003.11.1.2.1.1.13	SnmpAdminString	read-only	Additional miscellaneous info regarding this alarm.
acAlarmVarbinds	1.3.6.1.4.1.5003.11.1.3
U32 acAlarmVarbindsSequenceNumber	1.3.6.1.4.1.5003.11.1.3.1	Unsigned32	accessible-for-notify	The sequence number of the alarm raise or clear trap.
DAT acAlarmVarbindsDateAndTime	1.3.6.1.4.1.5003.11.1.3.2	DateAndTime	accessible-for-notify	The date and time at the time the alarm raise or clear trap was sent.
U32 acAlarmVarbindsAlarmName	1.3.6.1.4.1.5003.11.1.3.3	Unsigned32	accessible-for-notify	The name of the alarm that was raised or cleared. This actually in the form of a number. Each kind of alarm has a unique number associated with it.
STR acAlarmVarbindsTextualDescription	1.3.6.1.4.1.5003.11.1.3.4	SnmpAdminString	accessible-for-notify	Text that descries the alarm condition.
STR acAlarmVarbindsSource	1.3.6.1.4.1.5003.11.1.3.5	SnmpAdminString	accessible-for-notify	The component in the system which raised or cleared the alarm.
ACA acAlarmVarbindsSeverity	1.3.6.1.4.1.5003.11.1.3.6	AcAlarmSeverity	accessible-for-notify	The severity of the alarm. A severity of warning, minor, major or critical indicates a raise trap. A severity of cleared indicates a clear trap.
ACA acAlarmVarbindsEventType	1.3.6.1.4.1.5003.11.1.3.7	AcAlarmEventType	accessible-for-notify	The event type of the alarm.
ACA acAlarmVarbindsProbableCause	1.3.6.1.4.1.5003.11.1.3.8	AcAlarmProbableCause	accessible-for-notify	The probable cause of the alarm.
STR acAlarmVarbindsAdditionalInfo1	1.3.6.1.4.1.5003.11.1.3.9	SnmpAdminString	accessible-for-notify	Additional miscellaneous info regarding this alarm.
STR acAlarmVarbindsAdditionalInfo2	1.3.6.1.4.1.5003.11.1.3.10	SnmpAdminString	accessible-for-notify	Additional miscellaneous info regarding this alarm.
STR acAlarmVarbindsAdditionalInfo3	1.3.6.1.4.1.5003.11.1.3.11	SnmpAdminString	accessible-for-notify	Additional miscellaneous info regarding this alarm.

RFC description

Manages active alarms and alarm history for Audiocodes voice products with event notifications.

Start monitoring AudioCodes media/VoIP gateways with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download AcAlarm

What Is AcAlarm?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description