CISCOSB-COPY-MIB

All MIBs › CISCOSB-COPY-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2010-05-11

Category: Device Management, Vendor: RADLAN/Cisco SB

Description: Manages Cisco Small Business file copy operations for firmware and configuration file transfers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCOSB-COPY-MIB?

CISCOSB-COPY-MIB is a Cisco Small Business enterprise MIB that manages file-copy operations used to transfer firmware images and configuration files to and from Cisco Small Business switches and routers. It exposes a copy-operation table capturing source and destination locations (network address, file system, unit number), file names/types, and the identity of the application that initiated each transfer. It is primarily used to monitor firmware upgrade and configuration backup/restore jobs -- tracking whether a copy operation is in progress, succeeded, or failed lets an operator confirm a software-version update or configuration change completed correctly, functioning as a software-status check rather than a hardware sensor. It relies on standard SMIv2 table conventions and is specific to Cisco's Small Business rlCopy enterprise object tree, without dependence on broader IETF standards MIBs. It is typically used on Cisco Small Business managed switches/routers during remote firmware upgrades or configuration transfers initiated from a network management station. Engineers can download the CISCOSB-COPY-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCOSB-COPY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco Small Business switch
Cisco Small Business router

Monitoring Examples

An administrator would poll rlCopyTable/rlCopyEntry indexed by rlCopyIndex to track an in-progress firmware or configuration transfer, checking rlCopySourceFileName, rlCopySourceFileType, rlCopySourceLocation, and rlCopyDestinationLocation to confirm which file is being copied and where it is headed. The rlCopyApplicationId and rlCopyMirror fields identify which management application requested the copy and whether it targets a mirrored unit, letting an operator spot a stalled or failed firmware push during a software upgrade.

What Can Be Monitored

firmware/configuration file copy status
copy source and destination location
source/destination file name and type
copy job application ID
mirrored-unit copy target

Imported Objects

From CISCOSB-DEVICEPARAMS-MIB

rndErrorDesc	OBJECT-TYPE
rndErrorSeverity	OBJECT-TYPE

From CISCOSB-MIB

rndNotifications	OBJECT-IDENTITY
switch001	MODULE-IDENTITY

From CISCOSB-SECSD-MIB

RlSecSdAccessType

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Counter32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
rlCopy	1.3.6.1.4.1.9.6.1.101.87			Added field rlCopyInetSpecificCopyInfo
RLC rlCopyApplicationId	1.3.6.1.4.1.9.6.1.101.87.2.1.2	RlCopyApplicationType	read-only	The applicatione activated this comand
T/F rlCopyAuditingEnable	1.3.6.1.4.1.9.6.1.101.87.5	TruthValue	read-write	Controls whether SysLog messages should be issued on file copy events
INT rlCopyBytesTransferred	1.3.6.1.4.1.9.6.1.101.87.2.1.15	INTEGER	read-only	The number of bytes that were transferred by the copy operation.
STR rlCopyDestinationFileName	1.3.6.1.4.1.9.6.1.101.87.2.1.11	DisplayString	read-write	The name of the destination file.
RLC rlCopyDestinationFileType	1.3.6.1.4.1.9.6.1.101.87.2.1.12	RlCopyFileType	read-write	The type of the destination file.
IP rlCopyDestinationIpAddress	1.3.6.1.4.1.9.6.1.101.87.2.1.9	IpAddress	read-write	The Ip address of the destination remote host
RLC rlCopyDestinationLocation	1.3.6.1.4.1.9.6.1.101.87.2.1.8	RlCopyLocationType	read-write	Destination File Location
INT rlCopyDestinationUnitNumber	1.3.6.1.4.1.9.6.1.101.87.2.1.10	INTEGER	read-write	The unit number of the destination unit, value 257 means all units
rlCopyEntry	1.3.6.1.4.1.9.6.1.101.87.2.1		not-accessible	An entry (conceptual row) in the CopyTable.
NTF rlCopyFailed	1.3.6.1.4.1.9.6.1.101.0.181			Informational trap indicating that the copy operation has failed.
NTF rlCopyFinished	1.3.6.1.4.1.9.6.1.101.0.180			Informational trap indicating that the device has finished a copy operation successfully.
INT rlCopyFreeHistoryIndex	1.3.6.1.4.1.9.6.1.101.87.3	INTEGER	read-only	Gives the next free index in the rlCopyHistoryTable (i.e., the next available value for rlCopyHistoryHistoryIndex)
RLC rlCopyHistoryApplicationId	1.3.6.1.4.1.9.6.1.101.87.4.1.2	RlCopyApplicationType	read-only	The application that activated this comand
INT rlCopyHistoryBytesTransferred	1.3.6.1.4.1.9.6.1.101.87.4.1.15	INTEGER	read-only	The number of bytes that were transferred by the copy operation.
STR rlCopyHistoryDestinationFileName	1.3.6.1.4.1.9.6.1.101.87.4.1.11	DisplayString	read-write	The name of the destination file.
RLC rlCopyHistoryDestinationFileType	1.3.6.1.4.1.9.6.1.101.87.4.1.12	RlCopyFileType	read-write	The type of the destination file.
IP rlCopyHistoryDestinationIpAddress	1.3.6.1.4.1.9.6.1.101.87.4.1.9	IpAddress	read-write	The IP address of the destination remote host
RLC rlCopyHistoryDestinationLocation	1.3.6.1.4.1.9.6.1.101.87.4.1.8	RlCopyLocationType	read-write	Destination File Location
INT rlCopyHistoryDestinationUnitNumber	1.3.6.1.4.1.9.6.1.101.87.4.1.10	INTEGER	read-write	The unit number of the destination unit
rlCopyHistoryEntry	1.3.6.1.4.1.9.6.1.101.87.4.1		not-accessible	An entry (conceptual row) in the rlCopyHistoryTable.
STR rlCopyHistoryErrorMessage	1.3.6.1.4.1.9.6.1.101.87.4.1.18	DisplayString	read-only	Error message as a result of failed copy action.
INT rlCopyHistoryHistoryIndex	1.3.6.1.4.1.9.6.1.101.87.4.1.1	INTEGER	read-only	The row index in the table.
INT rlCopyHistoryInBackground	1.3.6.1.4.1.9.6.1.101.87.4.1.16	INTEGER	read-write	When enabled the copy operation is done in the background.
INT rlCopyHistoryIndex	1.3.6.1.4.1.9.6.1.101.87.2.1.18	INTEGER	read-write	The index of the entry corresponding to this one in the rlCopyHistoryTable (equals rlCopyHistoryHistoryIndex). A value of 0 indicates that no history entry should be kept for this copy operation.
RLC rlCopyHistoryInetApplicationId	1.3.6.1.4.1.9.6.1.101.87.9.1.2	RlCopyApplicationType	read-only	The application that activated this comand
INT rlCopyHistoryInetBytesTransferred	1.3.6.1.4.1.9.6.1.101.87.9.1.17	INTEGER	read-only	The number of bytes that were transferred by the copy operation.
STR rlCopyHistoryInetDestinationFileName	1.3.6.1.4.1.9.6.1.101.87.9.1.13	DisplayString	read-write	The name of the destination file.
RLC rlCopyHistoryInetDestinationFileType	1.3.6.1.4.1.9.6.1.101.87.9.1.14	RlCopyFileType	read-write	The type of the destination file.
IP rlCopyHistoryInetDestinationIpAddress	1.3.6.1.4.1.9.6.1.101.87.9.1.11	InetAddress	read-write	The Inet address of the destination remote host
IPt rlCopyHistoryInetDestinationIpAddressType	1.3.6.1.4.1.9.6.1.101.87.9.1.10	InetAddressType	read-write	The Inet address type of the destination remote host
RLC rlCopyHistoryInetDestinationLocation	1.3.6.1.4.1.9.6.1.101.87.9.1.9	RlCopyLocationType	read-write	Destination File Location
INT rlCopyHistoryInetDestinationUnitList	1.3.6.1.4.1.9.6.1.101.87.9.1.21	INTEGER	read-write	A bitmap of destination units for copy operation.
INT rlCopyHistoryInetDestinationUnitNumber	1.3.6.1.4.1.9.6.1.101.87.9.1.12	INTEGER	read-write	The unit number of the destination unit
rlCopyHistoryInetEntry	1.3.6.1.4.1.9.6.1.101.87.9.1		not-accessible	An entry (conceptual row) in the rlCopyHistoryTable.
STR rlCopyHistoryInetErrorMessage	1.3.6.1.4.1.9.6.1.101.87.9.1.20	DisplayString	read-only	Error message as a result of failed copy action.
INT rlCopyHistoryInetHistoryIndex	1.3.6.1.4.1.9.6.1.101.87.9.1.1	INTEGER	read-only	The row index in the table.
INT rlCopyHistoryInetInBackground	1.3.6.1.4.1.9.6.1.101.87.9.1.18	INTEGER	read-write	When enabled the copy operation is done in the background.
INT rlCopyHistoryInetOperationState	1.3.6.1.4.1.9.6.1.101.87.9.1.16	INTEGER	read-only	The state of the copy operation.
ROW rlCopyHistoryInetRowStatus	1.3.6.1.4.1.9.6.1.101.87.9.1.19	RowStatus	read-write	It is used delete an entry. No other operations are permitted since the history table is populated and updated through the copy table only.
STR rlCopyHistoryInetSourceFileName	1.3.6.1.4.1.9.6.1.101.87.9.1.7	DisplayString	read-write	The name of the source file.
RLC rlCopyHistoryInetSourceFileType	1.3.6.1.4.1.9.6.1.101.87.9.1.8	RlCopyFileType	read-write	The type of the source file.
IP rlCopyHistoryInetSourceIpAddress	1.3.6.1.4.1.9.6.1.101.87.9.1.5	InetAddress	read-write	The Inet address of the source remote host
IPt rlCopyHistoryInetSourceIpAddressType	1.3.6.1.4.1.9.6.1.101.87.9.1.4	InetAddressType	read-write	The Inet address type of the source remote host
RLC rlCopyHistoryInetSourceLocation	1.3.6.1.4.1.9.6.1.101.87.9.1.3	RlCopyLocationType	read-write	Source File Location
INT rlCopyHistoryInetSourceUnitNumber	1.3.6.1.4.1.9.6.1.101.87.9.1.6	INTEGER	read-write	The unit number of the source unit
rlCopyHistoryInetTable	1.3.6.1.4.1.9.6.1.101.87.9		not-accessible	The (conceptual) table listing only one entry at a time with parameters needed for configuration of the file copy action.
INT rlCopyHistoryInetUnitStatusList	1.3.6.1.4.1.9.6.1.101.87.9.1.22	INTEGER	read-only	A bitmap of copy operation status for each unit.
TIK rlCopyHistoryInetUpTime	1.3.6.1.4.1.9.6.1.101.87.9.1.15	TimeTicks	read-only	The time elapsed since this entry was created.
INT rlCopyHistoryOperationState	1.3.6.1.4.1.9.6.1.101.87.4.1.14	INTEGER	read-only	The state of the copy operation.
ROW rlCopyHistoryRowStatus	1.3.6.1.4.1.9.6.1.101.87.4.1.17	RowStatus	read-write	It is used delete an entry. No other operations are permitted since the history table is populated and updated through the copy table only.
STR rlCopyHistorySourceFileName	1.3.6.1.4.1.9.6.1.101.87.4.1.6	DisplayString	read-write	The name of the source file.
RLC rlCopyHistorySourceFileType	1.3.6.1.4.1.9.6.1.101.87.4.1.7	RlCopyFileType	read-write	The type of the source file.
IP rlCopyHistorySourceIpAddress	1.3.6.1.4.1.9.6.1.101.87.4.1.4	IpAddress	read-write	The IP address of the source remote host
RLC rlCopyHistorySourceLocation	1.3.6.1.4.1.9.6.1.101.87.4.1.3	RlCopyLocationType	read-write	Source File Location
INT rlCopyHistorySourceUnitNumber	1.3.6.1.4.1.9.6.1.101.87.4.1.5	INTEGER	read-write	The unit number of the source unit
rlCopyHistoryTable	1.3.6.1.4.1.9.6.1.101.87.4		not-accessible	The (conceptual) table listing only one entry at a time with parameters needed for configuration of the file copy action.
TIK rlCopyHistoryUpTime	1.3.6.1.4.1.9.6.1.101.87.4.1.13	TimeTicks	read-only	The time elapsed since this entry was created.
INT rlCopyInBackground	1.3.6.1.4.1.9.6.1.101.87.2.1.16	INTEGER	read-write	When enabled the copy operation is done in the background.
INT rlCopyIndex	1.3.6.1.4.1.9.6.1.101.87.2.1.1	INTEGER	read-only	The row index in the table.
RLC rlCopyInetApplicationId	1.3.6.1.4.1.9.6.1.101.87.8.1.2	RlCopyApplicationType	read-only	The applicatione activated this comand
INT rlCopyInetBytesTransferred	1.3.6.1.4.1.9.6.1.101.87.8.1.17	INTEGER	read-only	The number of bytes that were transferred by the copy operation.
STR rlCopyInetDestinationFileName	1.3.6.1.4.1.9.6.1.101.87.8.1.13	DisplayString	read-write	The name of the destination file.
RLC rlCopyInetDestinationFileType	1.3.6.1.4.1.9.6.1.101.87.8.1.14	RlCopyFileType	read-write	The type of the destination file.
IP rlCopyInetDestinationIpAddress	1.3.6.1.4.1.9.6.1.101.87.8.1.11	InetAddress	read-write	The Inet address of the destination remote host
IPt rlCopyInetDestinationIpAddressType	1.3.6.1.4.1.9.6.1.101.87.8.1.10	InetAddressType	read-write	The Inet address type of the destination remote host
RLC rlCopyInetDestinationLocation	1.3.6.1.4.1.9.6.1.101.87.8.1.9	RlCopyLocationType	read-write	Destination File Location
INT rlCopyInetDestinationUnitList	1.3.6.1.4.1.9.6.1.101.87.8.1.21	INTEGER	read-write	A bitmap of destination units for copy operation.
INT rlCopyInetDestinationUnitNumber	1.3.6.1.4.1.9.6.1.101.87.8.1.12	INTEGER	read-write	The unit number of the destination unit, value 257 means all units
rlCopyInetEntry	1.3.6.1.4.1.9.6.1.101.87.8.1		not-accessible	An entry (conceptual row) in the CopyTable.
INT rlCopyInetHistoryIndex	1.3.6.1.4.1.9.6.1.101.87.8.1.20	INTEGER	read-write	The index of the entry corresponding to this one in the rlCopyHistoryTable (equals rlCopyHistoryHistoryIndex). A value of 0 indicates that no history entry should be kept for this copy operation.
INT rlCopyInetInBackground	1.3.6.1.4.1.9.6.1.101.87.8.1.18	INTEGER	read-write	When enabled the copy operation is done in the background.
INT rlCopyInetIndex	1.3.6.1.4.1.9.6.1.101.87.8.1.1	INTEGER	read-only	The row index in the table.
INT rlCopyInetOperationState	1.3.6.1.4.1.9.6.1.101.87.8.1.16	INTEGER	read-only	The state of the copy operation.
ROW rlCopyInetRowStatus	1.3.6.1.4.1.9.6.1.101.87.8.1.19	RowStatus	read-write	It is used to insert or delete an entry
STR rlCopyInetSourceFileName	1.3.6.1.4.1.9.6.1.101.87.8.1.7	DisplayString	read-write	The name of the source file.
RLC rlCopyInetSourceFileType	1.3.6.1.4.1.9.6.1.101.87.8.1.8	RlCopyFileType	read-write	The type of the source file.
IP rlCopyInetSourceIpAddress	1.3.6.1.4.1.9.6.1.101.87.8.1.5	InetAddress	read-write	The Inet address of the source remote host
IPt rlCopyInetSourceIpAddressType	1.3.6.1.4.1.9.6.1.101.87.8.1.4	InetAddressType	read-write	The Inet address type of the source remote host
RLC rlCopyInetSourceLocation	1.3.6.1.4.1.9.6.1.101.87.8.1.3	RlCopyLocationType	read-write	Source File Location
INT rlCopyInetSourceUnitNumber	1.3.6.1.4.1.9.6.1.101.87.8.1.6	INTEGER	read-write	The unit number of the source unit
STR rlCopyInetSpecificCopyInfo	1.3.6.1.4.1.9.6.1.101.87.8.1.23	DisplayString	read-write	Copy application specific information. For example: for SCP copy this field can be used to pass username and password information.
rlCopyInetTable	1.3.6.1.4.1.9.6.1.101.87.8		not-accessible	The (conceptual) table listing only one entry at a time with parameters needed for configuration of the file copy action.
INT rlCopyInetUnitStatusList	1.3.6.1.4.1.9.6.1.101.87.8.1.22	INTEGER	read-only	A bitmap of copy operation status for each unit.
TIK rlCopyInetUpTime	1.3.6.1.4.1.9.6.1.101.87.8.1.15	TimeTicks	read-only	The time elapsed since this entry was created.
INT rlCopyMessagesCopyIndex	1.3.6.1.4.1.9.6.1.101.87.6.1.1	INTEGER	not-accessible	The index of the copy operation whose messages are displayed.
rlCopyMessagesEntry	1.3.6.1.4.1.9.6.1.101.87.6.1		not-accessible	An entry (conceptual row) in the rlCopyMessagesTable.
INT rlCopyMessagesMessageIndex	1.3.6.1.4.1.9.6.1.101.87.6.1.2	INTEGER	not-accessible	The index of the displayed message.
STR rlCopyMessagesMessageText	1.3.6.1.4.1.9.6.1.101.87.6.1.3	DisplayString	read-only	The text of the message occurred in the copy operation.
ROW rlCopyMessagesStatus	1.3.6.1.4.1.9.6.1.101.87.6.1.4	RowStatus	read-write	Only destroy is supported.
rlCopyMessagesTable	1.3.6.1.4.1.9.6.1.101.87.6		not-accessible	The table listing the messages issued during a COPY operation.
INT rlCopyMessagesTableRemoveEntries	1.3.6.1.4.1.9.6.1.101.87.7	INTEGER	read-write	Setting this object with value n will remove all entries associated with copy operation represented by the value n from the rlCopyMessagesTable, i.e. all the entries with rlCopyMessagesCopyIndex = n.
INT rlCopyMibVersion	1.3.6.1.4.1.9.6.1.101.87.1	INTEGER	read-only	Indicates the Copy support version. The current version is 1.
rlCopyMirror	1.3.6.1.4.1.9.6.1.101.87.13
INT rlCopyMirrorEnable	1.3.6.1.4.1.9.6.1.101.87.13.1	INTEGER	read-write	This MIB should be used in order to enable/disable automatic copy of startup-config to mirror-config.
NTF rlCopyMirrorFileIllegal	1.3.6.1.4.1.9.6.1.101.0.220			A trap indicating that the mirror configuration file is illegal due to failure of prevoius copy operation/s to mirror-config.
INT rlCopyMirrorTimeout	1.3.6.1.4.1.9.6.1.101.87.11	INTEGER	read-write	This MIB should be used in order to change the time-interval of automatic copy of startup-config to mirror-config. The MIB is for debugging purposes only, and given value should be the number of minutes for time-interval of this copy.
INT rlCopyOperationState	1.3.6.1.4.1.9.6.1.101.87.2.1.14	INTEGER	read-only	The state of the copy operation.
rlCopyOptionsEntry	1.3.6.1.4.1.9.6.1.101.87.12.1		not-accessible	An entry (conceptual row) in the rlCopyOptionsTable.
U32 rlCopyOptionsIndex	1.3.6.1.4.1.9.6.1.101.87.12.1.1	Unsigned32	not-accessible	The index should be equal to the value of rlCopyInetIndex of the relevant rlCopyInetEntry.
RLC rlCopyOptionsRequestedSsdAccess	1.3.6.1.4.1.9.6.1.101.87.12.1.2	RlCopySecSdAccessType	read-create	The requested format for sensitive data in the copy. Relevant only for configuration file upload
rlCopyOptionsTable	1.3.6.1.4.1.9.6.1.101.87.12		not-accessible	The table includes more field options for the copy operation.
ROW rlCopyRowStatus	1.3.6.1.4.1.9.6.1.101.87.2.1.17	RowStatus	read-write	It is used to insert or delete an entry
STR rlCopySourceFileName	1.3.6.1.4.1.9.6.1.101.87.2.1.6	DisplayString	read-write	The name of the source file.
RLC rlCopySourceFileType	1.3.6.1.4.1.9.6.1.101.87.2.1.7	RlCopyFileType	read-write	The type of the source file.
IP rlCopySourceIpAddress	1.3.6.1.4.1.9.6.1.101.87.2.1.4	IpAddress	read-write	The Ip address of the source remote host
RLC rlCopySourceLocation	1.3.6.1.4.1.9.6.1.101.87.2.1.3	RlCopyLocationType	read-write	Source File Location
INT rlCopySourceUnitNumber	1.3.6.1.4.1.9.6.1.101.87.2.1.5	INTEGER	read-write	The unit number of the source unit
T/F rlCopyStaticDowngradeStatus	1.3.6.1.4.1.9.6.1.101.87.14	TruthValue	read-only	Controls whether static downgrade in progress
NTF rlCopySWFinished	1.3.6.1.4.1.9.6.1.101.0.211			A trap indicating that the device has finished a copy operation of image successfully.
NTF rlCopySWToUnits	1.3.6.1.4.1.9.6.1.101.0.212			A trap indicating to master unit that remote units have finished a copy operation of image successfully.
rlCopyTable	1.3.6.1.4.1.9.6.1.101.87.2		not-accessible	The (conceptual) table listing only one entry at a time with parameters needed for configuration of the file copy action.
INT rlCopyUnitsList	1.3.6.1.4.1.9.6.1.101.87.10	INTEGER	accessible-for-notify	Potential list of units used by trap rlCopySWToUnits
TIK rlCopyUpTime	1.3.6.1.4.1.9.6.1.101.87.2.1.13	TimeTicks	read-only	The time elapsed since this entry was created.

RFC description

Manages file copy operations on Cisco Small Business devices, supporting TFTP, SCP, HTTP, and USB transfers with progress tracking.

Start monitoring Cisco Small Business switch/router with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCOSB-COPY-MIB

What Is CISCOSB-COPY-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description