RADLAN-rlIPMulticast-MIB

All MIBs › RADLAN-rlIPMulticast-MIB

Last Updated: 2004-04-19

Category: IGMP and Multicast, Vendor: RADLAN/Cisco SB

Description: Manages IP multicast routing table and interface statistics on Marvell switch platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RADLAN-rlIPMulticast-MIB?

RADLAN-rlIPMulticast-MIB is a RADLAN (Marvell switch-silicon reference-software) proprietary MIB configuring IP Multicast routing (IGMP/PIM-SM). Its objects cover a global IP-multicast-router enable, IGMP/PIM MIB version, PIM enable, IGMP-proxy/filter enable, an IGMP-filter table (ifIndex, address range, up time, status, action), PIM-SM enable/version, DR election enable, directly-connected-source enable, RP (Rendezvous Point) enable, SPT-switch enable, RP-set configuration type, and IGMP/PIM/PIM-SM-interface/PIM-SM-next-hop table-overflow flags. As a configuration/status MIB it lets an administrator confirm IGMP/PIM-SM multicast routing configuration and watch for table-overflow conditions on a RADLAN-based (Marvell-silicon) switch. It is deployed on switching equipment built on RADLAN (Marvell) switch reference software. Engineers can download the RADLAN-rlIPMulticast-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RADLAN-rlIPMulticast-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Switching equipment built on RADLAN (Marvell) switch reference software

Monitoring Examples

An administrator checks rlPimSMEnable and rlPimTableOverflow to confirm PIM-SM multicast routing configuration and catch table exhaustion on a RADLAN-based (Marvell) switch.

What Can Be Monitored

IGMP/PIM-SM multicast routing configuration and table-overflow conditions

Imported Objects

From IF-MIB

InterfaceIndex

From RADLAN-MIB

rnd	OBJECT-IDENTITY
rndErrorDesc	OBJECT-TYPE
rndErrorSeverity	OBJECT-TYPE
rndNotifications	OBJECT-IDENTITY

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF rlIgmpTableOverflow	1.3.6.1.4.1.89.0.143			An IGMP Table overflow.
NTF rlPimTableOverflow	1.3.6.1.4.1.89.0.144			An IGMP Table overflow.
NTF rlPimSmInterfaceTableOverflow	1.3.6.1.4.1.89.0.163			The PIM interface table Table overflows.
NTF rlPimSmNextHopTableOverflow	1.3.6.1.4.1.89.0.164			The PIM SM Next Hop Table overflows.
NTF rlPimSmMulticastRouteTableOverflow	1.3.6.1.4.1.89.0.165			The PIM SM Multicast Route Table overflows.
NTF rlPimSmTableOverflow	1.3.6.1.4.1.89.0.166			The PIM SM Table(Not include the Interface, Next Hop, Multicast Route Tables) overflows.
NTF rlPimSmSrcUnreacable	1.3.6.1.4.1.89.0.167			An RPF source unreacable.
NTF rlPimSmParallelPathToLAN	1.3.6.1.4.1.89.0.168			Two Pim ifIndexes connect to the same LAN
NTF rlPimSmNotSMUpstreamNeighbor	1.3.6.1.4.1.89.0.169			An RPF Upstream Neighbor is not support the PIM SM.
NTF rlIpmAddOutgoingInterfaceFailed	1.3.6.1.4.1.89.0.182			Adding an Ipm outgoing interface has failed.
rlIPmulticast	1.3.6.1.4.1.89.46			The private MIB module definition for IP Multicast support.
INT rlIpmRouterEnable	1.3.6.1.4.1.89.46.1	INTEGER	read-write	The enabled status of IP Multicast routing on this router.
rlIgmp	1.3.6.1.4.1.89.46.2
INT rlIgmpMibVersion	1.3.6.1.4.1.89.46.2.1	INTEGER	read-only	MIB's version, the current version is 1.
rlPim	1.3.6.1.4.1.89.46.3
INT rlPimMibVersion	1.3.6.1.4.1.89.46.3.2	INTEGER	read-only	MIB's version, the current version is 1.
INT rlPimEnable	1.3.6.1.4.1.89.46.3.7	INTEGER	read-write	The enabled status of PIM protocol on this router.
rlDvmrp	1.3.6.1.4.1.89.46.4
rlIgmpProxy	1.3.6.1.4.1.89.46.5
INT rlIgmpProxyEnable	1.3.6.1.4.1.89.46.5.1	INTEGER	read-write	The enabled status of IGMP Proxy on this router.
rlIgmpFilter	1.3.6.1.4.1.89.46.6
INT rlIgmpFilterEnable	1.3.6.1.4.1.89.46.6.1	INTEGER	read-write	The enabled status of Igmp filter on this router.
rlIgmpFilterTable	1.3.6.1.4.1.89.46.6.2		not-accessible	The (conceptual) table listing the IP multicast groups which are permited or denied from the particular interface.
rlIgmpFilterEntry	1.3.6.1.4.1.89.46.6.2.1		not-accessible	An entry (conceptual row) in the igmpFilterTable.
NUM rlIgmpFilterIfIndex	1.3.6.1.4.1.89.46.6.2.1.1	InterfaceIndex	not-accessible	The interface for which this entry contains information for an IP multicast group address.
IP rlIgmpFilterAddressFrom	1.3.6.1.4.1.89.46.6.2.1.2	IpAddress	not-accessible	The first IP multicast group address for which this entry contains information.
IP rlIgmpFilterAddressTo	1.3.6.1.4.1.89.46.6.2.1.3	IpAddress	not-accessible	The last IP multicast group address for which this entry contains information.
TIK rlIgmpFilterUpTime	1.3.6.1.4.1.89.46.6.2.1.4	TimeTicks	read-only	The time elapsed since this entry was created.
ROW rlIgmpFilterStatus	1.3.6.1.4.1.89.46.6.2.1.5	RowStatus	read-write	The status of this entry.
INT rlIgmpFilterAction	1.3.6.1.4.1.89.46.6.2.1.6	INTEGER	read-write	Filter action - permit/deny for the group received from the interface.
rlPimSM	1.3.6.1.4.1.89.46.7
INT rlPimSMEnable	1.3.6.1.4.1.89.46.7.1	INTEGER	read-write	The enabled status of PIM SM on this router.
INT rlPimSMMibVersion	1.3.6.1.4.1.89.46.7.2	INTEGER	read-only	The Mib version , current version 2.
INT rlPimSMDREnable	1.3.6.1.4.1.89.46.7.4	INTEGER	read-write	The enabled status of PIM SM Designated Router on this router.
INT rlPimSMDirectedConnectedSourceEnable	1.3.6.1.4.1.89.46.7.5	INTEGER	read-write	The enabled status of Directed Connected Source on this router. If disable, the router not work with direct connected sources.
INT rlPimSMRPEnable	1.3.6.1.4.1.89.46.7.6	INTEGER	read-write	The enabled status of PIM SM Randevouz Point on this router.
INT rlPimSMSPTSwitchEnable	1.3.6.1.4.1.89.46.7.7	INTEGER	read-write	The enabled status of PIM SM SPT Switch on this router. If disable ,the router will work only through the RPT
INT rlPimSmRPSetConfigurationType	1.3.6.1.4.1.89.46.7.8	INTEGER	read-write	Type of RP set configuration:manualy or through boot stap message .

RFC description

Private MIB module for IP multicast support, including IGMP, PIM, DVMRP, and IGMP proxy protocol management.

Start monitoring Switching equipment built on RADLAN (Marvell) switch reference software (IGMP/PIM-SM multicast routing) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RADLAN-rlIPMulticast-MIB

What Is RADLAN-rlIPMulticast-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description