| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ciscoWanTopologyMIB | 1.3.6.1.4.1.9.9.234 | | | |
| ciscoWanTopologyMIBNotifs | 1.3.6.1.4.1.9.9.234.0 | | | |
| NTF cwtConfigGatewayStatus | 1.3.6.1.4.1.9.9.234.0.1 | | | This notification is generated when the gateway node admin status is changed. |
| NTF cwtTopoInfoAdd | 1.3.6.1.4.1.9.9.234.0.2 | | | This notification is generated when a new topology nodal info entry is added in the topology database. |
| NTF cwtTopoInfoModify | 1.3.6.1.4.1.9.9.234.0.3 | | | This notification is generated when an existing topology nodal info entry is modified in the topology database. |
| NTF cwtTopoInfoDelete | 1.3.6.1.4.1.9.9.234.0.4 | | | This notification is generated when an existing topology nodal info entry is deleted in the topology database. |
| NTF cwtTopoDbFull | 1.3.6.1.4.1.9.9.234.0.5 | | | This notification is generated when the topology database becomes full. |
| NTF cwtFeederInfoAdd | 1.3.6.1.4.1.9.9.234.0.6 | | | This notification is generated when a new feeder info entry is added in the database. |
| NTF cwtFeederInfoModify | 1.3.6.1.4.1.9.9.234.0.7 | | | This notification is generated when an existing feeder info entry is modified in the database. |
| NTF cwtFeederInfoDelete | 1.3.6.1.4.1.9.9.234.0.8 | | | This notification is generated when an existing feeder info entry is deleted in the database. |
| NTF cwtLinkInfoAdd | 1.3.6.1.4.1.9.9.234.0.9 | | | This notification is generated when a new link info entry is added in the 'link' database. |
| NTF cwtLinkInfoModify | 1.3.6.1.4.1.9.9.234.0.10 | | | This notification is generated when an existing link info entry is modified in the 'link' database. |
| NTF cwtLinkInfoDelete | 1.3.6.1.4.1.9.9.234.0.11 | | | This notification is generated when an existing link info entry is deleted in the 'link' database. |
| ciscoWanTopologyMIBObjects | 1.3.6.1.4.1.9.9.234.1 | | | |
| cwtSystemGroup | 1.3.6.1.4.1.9.9.234.1.1 | | | |
| INT cwtGatewayAdminStatus | 1.3.6.1.4.1.9.9.234.1.1.1 | INTEGER | read-write | The value of this object determines whether this node
is a Gateway Node or not. A value of `enable' configures
this node to be the Gateway Node, and enables
the generation of the topology database. A value of `disable'
configures this node to not be a Gateway Node, and deletes
the topology database if it exists. |
| INT cwtGatewayNodeOperStatus | 1.3.6.1.4.1.9.9.234.1.1.2 | INTEGER | read-only | This is the operational status of the Gateway Node.
'disabled' indicates that this node is not a
Gateway Node and no topology database is available
on this node.
'enabled' indicates that this node has been configured
as the Gateway Node and the topology database has been
built.
'disabling' indicates that this node is no longer the
Gateway Node and is in the process of deleting the
topology database.
'enabling' indicates that this node has been configured
as the Gateway Node and is in the process of building
the topology database.
'enabledAndFull' indicates that this node has been
configured as the Gateway Node but its topology database
is full.
The management station should always poll this object
first before taking action to:
a) 'enable' or 'disable' the Gateway Node
b) remove an entry or entries from 'cwtNodeInfoTable' and
its corresponding entries from 'cwtFeederInfoTable'.
If the object returns 'disabled', the management station
can 'enable' the Gateway Node if it desires.
If the object returns 'enabled', the management station
can 'disable' the Gateway Node if it desires.
If the object returns 'enabling' or 'disabling', the
management station should not take any actions.
If the object returns 'enabledAndFull', the management
station can take one of the following actions:
a) remove enties from the cwtNodeInfoTable
b) 'disable' and then 'enable' the Gateway Node, which
would cause the node to delete and then rebuild the
topology database. |
| TIM cwtDBLastChange | 1.3.6.1.4.1.9.9.234.1.1.3 | TimeStamp | read-only | The value of MIB II's sysUpTime object at the time that:
a) the topology database is last changed on this node.
b) the cwtGatewayAdminStatus is last changed.
c) the cwtGatewayNodeOperStatus enters the 'enabledAndFull'
state. |
| cwtNodalInfoGroup | 1.3.6.1.4.1.9.9.234.1.2 | | | |
| cwtNodeInfoTable | 1.3.6.1.4.1.9.9.234.1.2.1 | | not-accessible | A table of node topology information is to be maintained
for the management station. This table contains the
information for the nodes in the peer group. |
| cwtNodeInfoEntry | 1.3.6.1.4.1.9.9.234.1.2.1.1 | | not-accessible | This is a row entry in the topology node info table. Each
entry corresponds to one node in the network. |
| CWT cwtIndex | 1.3.6.1.4.1.9.9.234.1.2.1.1.1 | CwtNodeInfoTableIndex | not-accessible | This is the index into the topology database array.
This value should remain persistent while the topology
database exists, which means that it'll be consistent
across boots. However, if this node is disabled as
the gateway node, and later on enabled (by changing the
value of cwtGatewayAdminStatus), then the cwtIndex may
be different for the same node info entry in the topology
database. |
| T/F cwtGatewayNodeFlag | 1.3.6.1.4.1.9.9.234.1.2.1.1.2 | TruthValue | read-write | This variable indicates if the corresponding entry
is a Gateway Node or not. If this value contains
'true', the corresponding node is a Gateway Node.
If this value contains 'false', then the corresponding
node is not a Gateway Node. |
| PNN cwtNodeId | 1.3.6.1.4.1.9.9.234.1.2.1.1.3 | PnniNodeId | read-write | The unique Id which identifies the node in the entry.
This value is different from cwtIndex because it is a
unique number which identifies a node in the ATM network,
while cwtIndex is an index for an entry in the topology
database. The same physical node can have different
cwtIndex in different topology databases. |
| STR cwtNodeName | 1.3.6.1.4.1.9.9.234.1.2.1.1.4 | SnmpAdminString | read-write | The configured name of the node. |
| IAN cwtPrimIPIfType | 1.3.6.1.4.1.9.9.234.1.2.1.1.5 | IANAifType | read-write | This object specifies the type of interface for the
associated instance of cwtPrimIP. |
| STR cwtPrimIPIfName | 1.3.6.1.4.1.9.9.234.1.2.1.1.6 | SnmpAdminString | read-write | This object specifies the name of the interface for the
associated instance of cwtPrimIP. |
| IPt cwtPrimIPAddrType | 1.3.6.1.4.1.9.9.234.1.2.1.1.7 | InetAddressType | read-write | This object specifies the type of address contained in the
associated instance of cwtPrimIP. |
| IP cwtPrimIP | 1.3.6.1.4.1.9.9.234.1.2.1.1.8 | InetAddress | read-write | Primary IP address of the corresponding node. This value
is taken from the PNNI Nodal PTSE. The primary IP address is
used by the NMS to manage the switch. The type of interface
(i.e. ATM interface, LAN interface, etc) for this IP address
is specified by cwtPrimIPIfType. The NMS will use this IP
address first, but if it can not connect to the switch on
this address, then it will try to contact the switch using
the secondary IP address instead. |
| IAN cwtSecIPIfType | 1.3.6.1.4.1.9.9.234.1.2.1.1.9 | IANAifType | read-write | This object specifies the type of interface for the
associated instance of cwtSecIP. |
| STR cwtSecIPIfName | 1.3.6.1.4.1.9.9.234.1.2.1.1.10 | SnmpAdminString | read-write | This object specifies the name of the interface for the
associated instance of cwtSecIP. |
| IPt cwtSecIPAddrType | 1.3.6.1.4.1.9.9.234.1.2.1.1.11 | InetAddressType | read-write | This object specifies the type of address contained in the
associated instance of cwtSecIP. |
| IP cwtSecIP | 1.3.6.1.4.1.9.9.234.1.2.1.1.12 | InetAddress | read-write | Secondary IP address of the corresponding node. This value
is taken from the PNNI Nodal PTSE. This value is used by
the NMS to manage the switch. Please refer to the
Description section of cwtPrimIP for more information. |
| OID cwtSysObjId | 1.3.6.1.4.1.9.9.234.1.2.1.1.13 | OBJECT IDENTIFIER | read-write | This variable contains the sysObjectID of the node,
which is used to identify different hardware platforms.
The actual values are defined in CISCO-PRODUCTS-MIB. |
| T/F cwtNodeInfoTimeOutFlag | 1.3.6.1.4.1.9.9.234.1.2.1.1.14 | TruthValue | read-write | This variable indicates if the PTSE of this node
is currently contained in the PNNI PTSE database. The
nodal information in the persistent topology database
is derived from the PTSEs in the PNNI PTSE database.
The entries in the PNNI PTSE database times out if no
new PTSE is received from a node after a certain
time. If that happens, this object is set to 'false'.
This object would allow the NMS to determine whether
this node currently has connectivity with the rest of
the network. |
| ROW cwtRowStatus | 1.3.6.1.4.1.9.9.234.1.2.1.1.15 | RowStatus | read-write | In our implementation, we'll be supporting 'active',
'createAndGo', and 'destroy'. The value of this
variable is set to 'active' by the managed system for
each valid entry. If a management station wants to
delete an entry from the database, this value is set
to 'destroy'. If a management station wants to create
a new entry, this value is set to 'createAndGo'. |
| cwtFeederInfoGroup | 1.3.6.1.4.1.9.9.234.1.3 | | | |
| cwtFeederInfoTable | 1.3.6.1.4.1.9.9.234.1.3.1 | | not-accessible | A table of 'feeder' information to be maintained
for the management station. This table contains the
information for the 'feeders' in this peer group. |
| cwtFeederInfoEntry | 1.3.6.1.4.1.9.9.234.1.3.1.1 | | not-accessible | This is a row entry in the feeder info table. Each
entry corresponds to one 'feeder' in the network. |
| INT cwtFeederIndex | 1.3.6.1.4.1.9.9.234.1.3.1.1.1 | INTEGER | not-accessible | This is the index into the feeder database array.
This value should remain persistent while the feeder
database exists, which means that it'll be consistent
across boots. However, if this node is disabled as
the gateway node, and later on enabled, then the
'cwtFeederIndex' may be different for the same feeder info
entry in the 'feeder database'. |
| PNN cwtLocalNodeId | 1.3.6.1.4.1.9.9.234.1.3.1.1.2 | PnniNodeId | read-only | The unique Id which identifies the node the feeder is
attached to. |
| NUM cwtLocalIfIndex | 1.3.6.1.4.1.9.9.234.1.3.1.1.3 | InterfaceIndex | read-only | This variable contains the 'ifIndex' of the
local port this feeder is connected to. |
| STR cwtLocalIfName | 1.3.6.1.4.1.9.9.234.1.3.1.1.4 | SnmpAdminString | read-only | The textual name of the interface of the local
port this feeder is connected to. This should
contain the same 'ifName' associated with the
'cwtLocalIfIndex'.
If this interface does not have a
textual name, the value of this object is a zero
length string. |
| INT cwtFeederShelf | 1.3.6.1.4.1.9.9.234.1.3.1.1.5 | INTEGER | read-only | This variable contains the physcial shelf
number of the feeder module. |
| INT cwtFeederSlot | 1.3.6.1.4.1.9.9.234.1.3.1.1.6 | INTEGER | read-only | This variable contains the physical slot
number of the feeder module. |
| INT cwtFeederPort | 1.3.6.1.4.1.9.9.234.1.3.1.1.7 | INTEGER | read-only | This variable contains the physical port
number of the feeder module. |
| INT cwtFeederLMIType | 1.3.6.1.4.1.9.9.234.1.3.1.1.8 | INTEGER | read-only | This object identifies the 'link' type.
feeder(1) is applicable when cwtFeederType contains
a value other than fdrNON(12). xLMI(2) is applicable
only when cwtFeederType contains a value of fdrNON(12).
Both feeder(1) and xLMI(2) are CISCO proprietary
interfaces. xLMI stands for 'extended local management
interface. |
| INT cwtFeederType | 1.3.6.1.4.1.9.9.234.1.3.1.1.9 | INTEGER | read-only | This identifies the feeder type. fdrNON(12) is applicable
when cwfLMIType is xLMI(2). Other values are applicable
when cwtFeederLMIType is feeder(1).
The possible values are :
fdrIPX -- Feeder is an IPX node in a routing network
fdrBPX -- Feeder is an BPX node in a routing network
fdrIpxAF -- Feeder is a stand-alone IPX node
fdrBASIS -- Feeder is a stand-alone BASIS node
fdrUNKNOWN -- Feeder is unknown
fdrUNI -- Feeder is a UNI AIT (phase 0)
fdrAPS -- Feeder is an APS (Adjunct Processor Shelf)
fdrIGX -- Feeder is an IGX node in a routing network
fdrIgxAF -- Feeder is a stand-alone IGX node
fdrVSI -- Feeder is an VSI Controller
fdrPAR -- Feeder is a PAR
fdrNON -- This is non-feeder type |
| STR cwtFeederName | 1.3.6.1.4.1.9.9.234.1.3.1.1.10 | SnmpAdminString | read-only | The configured name of the feeder. |
| IPt cwtFeederLanIPAddrType | 1.3.6.1.4.1.9.9.234.1.3.1.1.11 | InetAddressType | read-only | This object specifies the type of address contained
in the associated instance of cwtFeederLanIP. |
| IP cwtFeederLanIP | 1.3.6.1.4.1.9.9.234.1.3.1.1.12 | InetAddress | read-only | This object specifies the LAN IP address of the
'feeder'. The type of this address is specified by
cwtFeederLanIPAddrType. |
| IPt cwtFeederAtmIPAddrType | 1.3.6.1.4.1.9.9.234.1.3.1.1.13 | InetAddressType | read-only | This object specifies the type of address contained
in the associated instance of cwtFeederAtmIP. |
| IP cwtFeederAtmIP | 1.3.6.1.4.1.9.9.234.1.3.1.1.14 | InetAddress | read-only | This object identifies the ATM IP address of the
'feeder'. The type of this address is specified by
cwtFeederAtmIP. |
| INT cwtFeederModelNumber | 1.3.6.1.4.1.9.9.234.1.3.1.1.15 | INTEGER | read-only | This variable contains the 'model number' of the
corresponding feeder. This is an implementation specific
integer value which is used to differentiate between
feeder platforms. |
| ROW cwtFeederRowStatus | 1.3.6.1.4.1.9.9.234.1.3.1.1.16 | RowStatus | read-write | In our implementation, we'll be supporting 'active',
and 'destroy'. The value of this
variable is set to 'active' by the managed system for
each valid entry. If a management station wants to
delete an entry from the database, this value is set
to 'destroy'. |
| cwtLinkInfoGroup | 1.3.6.1.4.1.9.9.234.1.4 | | | |
| cwtLinkInfoTable | 1.3.6.1.4.1.9.9.234.1.4.1 | | not-accessible | A table of 'link' information in the PNNI network.
If a switch is managed by multiple network
management stations, these network management
stations can have a persistent view of links
in the network by retrieving this table.
A link is a PNNI link between two nodes. |
| cwtLinkInfoEntry | 1.3.6.1.4.1.9.9.234.1.4.1.1 | | not-accessible | This is an entry in the 'cwtLinkInfoTable'. Each
entry corresponds to one link in the network.
a) The entries in this table are derived from PNNI
PTSE database or added by a network management
station.
b) The entries in the PNNI PTSE database
time out when no new PTSE is received from a node
after a certain time. However, the corresponding
entries are not removed from this table.
c) Only the network management station can delete
an entry from this table.
d) A network management station cannot modify an
existing entry in this table. |
| INT cwtLinkIndex | 1.3.6.1.4.1.9.9.234.1.4.1.1.1 | INTEGER | not-accessible | This is the index into the link database array.
This value is of local significance to the gateway
node. As long as a node remains 'enabled' as
a gateway node, this value remains persistent
across boots. However, if this node is disabled as
the gateway node, and is enabled later on, the
cwtLinkIndex may be different for the same link info
entry in the topology database. |
| PNN cwtLinkLocalNodeId | 1.3.6.1.4.1.9.9.234.1.4.1.1.2 | PnniNodeId | read-write | The unique Id which identifies the local node this link
resides on. |
| PNN cwtLinkRemoteNodeId | 1.3.6.1.4.1.9.9.234.1.4.1.1.3 | PnniNodeId | read-write | The unique Id which identifies the remote node this
link resides on. |
| NUM cwtLinkLocalIfIndex | 1.3.6.1.4.1.9.9.234.1.4.1.1.4 | InterfaceIndex | read-write | The local 'ifIndex' of this link. |
| NUM cwtLinkRemoteIfIndex | 1.3.6.1.4.1.9.9.234.1.4.1.1.5 | InterfaceIndex | read-write | The remote 'ifIndex' of this link. |
| STR cwtLinkLocalPhysicalId | 1.3.6.1.4.1.9.9.234.1.4.1.1.6 | SnmpAdminString | read-write | The local physical port identifier of this link. |
| STR cwtLinkRemotePhysicalId | 1.3.6.1.4.1.9.9.234.1.4.1.1.7 | SnmpAdminString | read-write | The remote physcial port identifier of this link. |
| T/F cwtLinkInfoTimeOutFlag | 1.3.6.1.4.1.9.9.234.1.4.1.1.8 | TruthValue | read-write | This variable indicates if the PTSE of this link
is currently contained in the PNNI PTSE database.
If this entry is also contained in the PNNI PTSE
database, the agent sets the value of this variable
to 'true'. If this entry is not contained in the PNNI
PTSE database, the agent set the value of this variable
to 'false'. |
| T/F cwtLinkOutsideLink | 1.3.6.1.4.1.9.9.234.1.4.1.1.9 | TruthValue | read-write | This variable indicates if the link is an outside link. |
| ROW cwtLinkRowStatus | 1.3.6.1.4.1.9.9.234.1.4.1.1.10 | RowStatus | read-write | In our implementation, we'll be supporting 'active',
'createAndGo', and 'destroy'. The value of this
variable is set to 'active' by the managed system for
each valid entry. If a management station wants to
delete an entry from the database, this value is set
to 'destroy'. If a management station wants to create
a new entry, this value is set to 'createAndGo'.
The network management station should provide the
intial values of all mib objects when
setting this variable to 'createAndGo'. |
| cwtMIBConformance | 1.3.6.1.4.1.9.9.234.2 | | | |
| cwtMIBCompliances | 1.3.6.1.4.1.9.9.234.2.1 | | | |
| cwtMIBCompliance | 1.3.6.1.4.1.9.9.234.2.1.1 | | | |
| cwtMIBCompliance2 | 1.3.6.1.4.1.9.9.234.2.1.2 | | | |
| cwtMIBCompliance3 | 1.3.6.1.4.1.9.9.234.2.1.3 | | | |
| cwtMIBGroups | 1.3.6.1.4.1.9.9.234.2.2 | | | |
| cwtSystemMIBGroups | 1.3.6.1.4.1.9.9.234.2.2.1 | | | |
| cwtNodalMIBGroups | 1.3.6.1.4.1.9.9.234.2.2.2 | | | |
| cwtFeederMIBGroups | 1.3.6.1.4.1.9.9.234.2.2.3 | | | |
| cwtNotificationsGroup | 1.3.6.1.4.1.9.9.234.2.2.4 | | | |
| cwtNotificationsGroup2 | 1.3.6.1.4.1.9.9.234.2.2.5 | | | |
| cwtNotificationsGroup3 | 1.3.6.1.4.1.9.9.234.2.2.6 | | | |
| cwtLinkMIBGroups | 1.3.6.1.4.1.9.9.234.2.2.7 | | | |
