All MIBs › InternetThruway-MIB
Category: DSL and Broadband, Device Management
Description: Internet Thruway network device MIB providing SNMP management objects for broadband access router monitoring and configuration.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is InternetThruway-MIB?
InternetThruway-MIB is a Nortel Networks (enterprise OID 562, Internet Thruway/CSG Content Service Gateway heritage) proprietary MIB reporting disk-partition capacity and internal software-component provisioning/debug/restart state. Its partition table, keyed by index, records name, percent full, megabytes free, space status/key/timestamp, while a component table records name, seconds-in-current-state, provisioning-state status/key/timestamp, debug status/key/timestamp, and restart status/key/timestamp, alongside a linkset table. As a hardware/status MIB it lets an administrator watch disk-partition free space and component provisioning/restart state on a Nortel Internet Thruway (CSG) platform. It is deployed on Nortel Networks Internet Thruway (CSG) platforms. Engineers can download the InternetThruway-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in InternetThruway-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nortel Networks Internet Thruway (CSG) platforms
Monitoring Examples
An administrator monitors partitionPercentFull to catch a disk partition approaching capacity on a Nortel Internet Thruway (CSG) platform before it affects service.
What Can Be Monitored
- disk-partition capacity and component provisioning/restart state
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| IpAddress | |
| enterprises |
From RFC1213-MIB
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| nortel | 1.3.6.1.4.1.562 | |||
| dialaccess | 1.3.6.1.4.1.562.14 | |||
| csg | 1.3.6.1.4.1.562.14.2 | |||
| system | 1.3.6.1.4.1.562.14.2.1 | |||
| disk | 1.3.6.1.4.1.562.14.2.1.1 | |||
| partitionTable | 1.3.6.1.4.1.562.14.2.1.1.1 | not-accessible | The PartitionTable contains information about each disk partition on the CSG | |
| partitionTableEntry | 1.3.6.1.4.1.562.14.2.1.1.1.1 | not-accessible | An entry in the PartitionTable. Indexed by partitionIndex | |
| INT partitionIndex | 1.3.6.1.4.1.562.14.2.1.1.1.1.1 | INTEGER | not-accessible | Identifies partition number. |
| STR partitionName | 1.3.6.1.4.1.562.14.2.1.1.1.1.2 | DisplayString | read-only | Identifies partition name. |
| INT partitionPercentFull | 1.3.6.1.4.1.562.14.2.1.1.1.1.3 | INTEGER | read-only | Indicates (in Percent) how full the disk is. |
| INT partitionMegsFree | 1.3.6.1.4.1.562.14.2.1.1.1.1.4 | INTEGER | read-only | Indicates how many Megabytes are free on the partition. |
| PAR partitionSpaceStatus | 1.3.6.1.4.1.562.14.2.1.1.1.1.5 | PartitionSpaceStatus | read-only | Indicates if there is currently a space alarm in progress. |
| INT partitionSpaceKey | 1.3.6.1.4.1.562.14.2.1.1.1.1.6 | INTEGER | read-only | Unique indicator for the partition space alarm. |
| STR partitionSpaceTimeStamp | 1.3.6.1.4.1.562.14.2.1.1.1.1.7 | TimeString | read-only | Indicates the time of the last partitionSpaceStatus transition. |
| components | 1.3.6.1.4.1.562.14.2.2 | |||
| componentTable | 1.3.6.1.4.1.562.14.2.2.10 | not-accessible | The ComponentTable contains information about all the Components that should be running on the CSG. | |
| componentTableEntry | 1.3.6.1.4.1.562.14.2.2.10.1 | not-accessible | An entry in the ComponentTable. componentTable entries are indexed by componentIndex, which is an integer. | |
| COM componentIndex | 1.3.6.1.4.1.562.14.2.2.10.1.1 | ComponentIndex | not-accessible | Identifies the component entry with an enumerated list. |
| STR componentName | 1.3.6.1.4.1.562.14.2.2.10.1.2 | DisplayString | read-only | Identifies component name. |
| INT compSecsInCurrentState | 1.3.6.1.4.1.562.14.2.2.10.1.3 | INTEGER | read-only | Indicates how many seconds a component has been running in its current state. |
| COM compProvStateStatus | 1.3.6.1.4.1.562.14.2.2.10.1.4 | ComponentSysmanState | read-only | Indicates the current state of the particular CSG component. The states are one of the following: inProvisionedState(1), notInProvisionedState(2), unknown(3) |
| INT compProvStateKey | 1.3.6.1.4.1.562.14.2.2.10.1.5 | INTEGER | read-only | Unique indicator for the prov state alarm. |
| STR compProvStateTimeStamp | 1.3.6.1.4.1.562.14.2.2.10.1.6 | TimeString | read-only | Indicates the time of the last state transition. |
| INT compDebugStatus | 1.3.6.1.4.1.562.14.2.2.10.1.7 | INTEGER | read-only | Shows if the component is running with debug on. |
| INT compDebugKey | 1.3.6.1.4.1.562.14.2.2.10.1.8 | INTEGER | read-only | Unique indicator for the debug state. |
| STR compDebugTimeStamp | 1.3.6.1.4.1.562.14.2.2.10.1.9 | TimeString | read-only | Indicates the time of the last debug transition. |
| INT compRestartStatus | 1.3.6.1.4.1.562.14.2.2.10.1.10 | INTEGER | read-only | Shows if the component has had multiple restarts recently. |
| INT compRestartKey | 1.3.6.1.4.1.562.14.2.2.10.1.11 | INTEGER | read-only | Unique indicator for the multi-restart of components. |
| STR compRestartTimeStamp | 1.3.6.1.4.1.562.14.2.2.10.1.12 | TimeString | read-only | Indicates the time of the last restart flagging. |
| traps | 1.3.6.1.4.1.562.14.2.3 | |||
| NTF diskSpaceClear | 1.3.6.1.4.1.562.14.2.3.0.1001 | The Trap generated when a disk partition has a space increase after a previously sent DiskSpaceAlarm. | ||
| NTF diskSpaceAlarm | 1.3.6.1.4.1.562.14.2.3.0.1004 | The Trap generated when a disk partition is running out of space provisioned state. | ||
| NTF etherCardTrapClear | 1.3.6.1.4.1.562.14.2.3.0.1011 | The Trap generated when the external ethernet card becomes available. | ||
| NTF etherCardTrapMajor | 1.3.6.1.4.1.562.14.2.3.0.1014 | The Trap generated when the external ethernet card is down. | ||
| NTF etherCardTrapCritical | 1.3.6.1.4.1.562.14.2.3.0.1015 | The Trap generated when the external ethernet card is down. | ||
| NTF compDebugOff | 1.3.6.1.4.1.562.14.2.3.0.2001 | The Trap generated when a Component turns off its debug info. | ||
| NTF compDebugOn | 1.3.6.1.4.1.562.14.2.3.0.2002 | The Trap generated when a Component turns on its debug info. | ||
| NTF compStateClear | 1.3.6.1.4.1.562.14.2.3.0.2011 | The Trap generated when a component goes to its provisioned states after a CompStatusAlarm trap has been sent. | ||
| NTF compStateAlarm | 1.3.6.1.4.1.562.14.2.3.0.2014 | The Trap generated when a component is not in it's provisioned state. | ||
| NTF restartStateClear | 1.3.6.1.4.1.562.14.2.3.0.2021 | The Trap generated when a component goes to its provisioned states after a RestartStateAlarm trap has been sent. | ||
| NTF restartStateAlarm | 1.3.6.1.4.1.562.14.2.3.0.2024 | The Trap generated when a component restarts repeatedly. | ||
| NTF ss7LinkFailureClear | 1.3.6.1.4.1.562.14.2.3.0.3001 | Trap generated to clear an SS7 link failure. | ||
| NTF ss7LinkFailureAlarm | 1.3.6.1.4.1.562.14.2.3.0.3004 | Trap generated for an SS7 link failure. | ||
| NTF ss7LinkCongestionClear | 1.3.6.1.4.1.562.14.2.3.0.3011 | Trap generated to indicate there is no longer congestion on an SS7 link. | ||
| NTF ss7LinkCongestionAlarm | 1.3.6.1.4.1.562.14.2.3.0.3012 | Trap generated for congestion on an SS7 Link. | ||
| NTF ss7ISUPFailureClear | 1.3.6.1.4.1.562.14.2.3.0.3021 | Trap generated to clear an ISUP failure alarm. | ||
| NTF ss7ISUPFailureAlarm | 1.3.6.1.4.1.562.14.2.3.0.3025 | Trap generated to indicate ISUP failure. | ||
| NTF ss7ISUPCongestionClear | 1.3.6.1.4.1.562.14.2.3.0.3031 | Trap generated to indicate there is no longer congestion with the ISUP protocol stack. | ||
| NTF ss7ISUPCongestionAlarm | 1.3.6.1.4.1.562.14.2.3.0.3033 | Trap generated to indicate congestion with the ISUP protocol stack. | ||
| NTF ss7FEPCongestionWarning | 1.3.6.1.4.1.562.14.2.3.0.3042 | Notification trap generated to indicate congestion encountered by the SS7 front-end process. | ||
| NTF ss7BEPCongestionWarning | 1.3.6.1.4.1.562.14.2.3.0.3052 | Notification trap generated to indicate congestion encountered by the SS7 back-end process. | ||
| NTF ss7MTP3CongestionClear | 1.3.6.1.4.1.562.14.2.3.0.3061 | Trap generated to indicate there is no longer MTP3 congestion. | ||
| NTF ss7MTP3CongestionMinor | 1.3.6.1.4.1.562.14.2.3.0.3063 | Trap generated for MTP3 congestion. | ||
| NTF ss7MTP3CongestionMajor | 1.3.6.1.4.1.562.14.2.3.0.3064 | Trap generated for MTP3 congestion. | ||
| NTF ss7MTP3CongestionCritical | 1.3.6.1.4.1.562.14.2.3.0.3065 | Trap generated for MTP3 congestion. | ||
| NTF ss7MTP2TrunkFailureClear | 1.3.6.1.4.1.562.14.2.3.0.3071 | Trap generated to clear an MTP2 trunk failure alarm. | ||
| NTF ss7MTP2TrunkFailureAlarm | 1.3.6.1.4.1.562.14.2.3.0.3075 | Trap generated to indicate an MTP2 trunk failure condition. | ||
| NTF ss7LinksetFailureClear | 1.3.6.1.4.1.562.14.2.3.0.3081 | Trap generated to clear a linkset failure alarm. | ||
| NTF ss7LinksetFailureAlarm | 1.3.6.1.4.1.562.14.2.3.0.3085 | Trap generated to indicate a linkset failure. | ||
| NTF ss7DestinationAccessible | 1.3.6.1.4.1.562.14.2.3.0.3091 | Trap generated to clear a destination inacessible alarm. An inaccessible signalling destination is considered accessible once Transfer Allowed (TFA) messages are sent along its prohibited signalling routes. | ||
| NTF ss7DestinationInaccessible | 1.3.6.1.4.1.562.14.2.3.0.3092 | Trap generated to indicate that a signalling destination is inaccessible. A destination is considered inaccessible once Transfer Prohibited (TFP) messages are received which indicate that the route to that destination is prohibited. | ||
| NTF ss7DestinationCongestedClear | 1.3.6.1.4.1.562.14.2.3.0.3101 | Trap generated to indicate that there is no longer congestion at an SS7 destination. | ||
| NTF ss7DestinationCongestedAlarm | 1.3.6.1.4.1.562.14.2.3.0.3103 | Trap generated to indicate congestion at an SS7 destination. | ||
| NTF ss7LinkAlignmentFailureClear | 1.3.6.1.4.1.562.14.2.3.0.3111 | Trap generated to clear a datalink alignment failure alarm. | ||
| NTF ss7LinkAlignmentFailureAlarm | 1.3.6.1.4.1.562.14.2.3.0.3114 | Trap generated to indicate alignment failure on a datalink. | ||
| NTF ncFoundServerTrap | 1.3.6.1.4.1.562.14.2.3.0.4011 | This trap is generated when the initially comes into contact with or regains contact with its peer in the cluster. The variables in this trap identify the server that has been found. The originator of this trap is implicitly defined. | ||
| NTF ncLostServerTrap | 1.3.6.1.4.1.562.14.2.3.0.4014 | This trap is generated when the CSG loses contact with its peer in the cluster. The variables in this trap identify the server that has been lost. The originator of this trap is implicitly defined. | ||
| NTF ncStateChangeTrap | 1.3.6.1.4.1.562.14.2.3.0.4022 | This trap is generated when any of the state values change. | ||
| NTF csgComplexStateTrapClear | 1.3.6.1.4.1.562.14.2.3.0.4031 | This trap is generated when any of the state values change Severity is determined only by the operational and standby states of both servers. | ||
| NTF csgComplexStateTrapMajor | 1.3.6.1.4.1.562.14.2.3.0.4034 | This trap is generated when any of the state values change Severity is determined only by the operational and standby states of both servers. | ||
| NTF csgComplexStateTrapCritical | 1.3.6.1.4.1.562.14.2.3.0.4035 | This trap is generated when any of the state values change Severity is determined only by the operational and standby states of both servers. | ||
| NTF cisRetrievalFailureTrapMajor | 1.3.6.1.4.1.562.14.2.3.0.4044 | This trap is generated when the TruCluster ASE information retrieval attempts failed repeatedly. | ||
| NTF genericNormal | 1.3.6.1.4.1.562.14.2.3.0.9001 | The Trap generated for generic normal priority text messages | ||
| NTF genericWarning | 1.3.6.1.4.1.562.14.2.3.0.9002 | The Trap generated for generic warning priority text messages | ||
| NTF genericMinor | 1.3.6.1.4.1.562.14.2.3.0.9003 | The Trap generated for generic minor priority text messages | ||
| NTF genericMajor | 1.3.6.1.4.1.562.14.2.3.0.9004 | The Trap generated for generic major priority text messages | ||
| NTF genericCritical | 1.3.6.1.4.1.562.14.2.3.0.9005 | The Trap generated for generic critical priority text messages | ||
| NTF hgStatusClear | 1.3.6.1.4.1.562.14.2.3.0.9011 | The Trap generated when a Home Gateway Status returns to normal after having previously been in the failed status. | ||
| NTF hgStatusAlarm | 1.3.6.1.4.1.562.14.2.3.0.9014 | The Trap generated when a Home Gateway is indicated to be failed. | ||
| NTF nasStatusClear | 1.3.6.1.4.1.562.14.2.3.0.9021 | The Trap generated when a rapport registers after having previously been in the failed status. | ||
| NTF nasStatusAlarm | 1.3.6.1.4.1.562.14.2.3.0.9024 | The Trap generated when a Nas is indicated to be failed. | ||
| STR trapCompName | 1.3.6.1.4.1.562.14.2.3.1 | DisplayString | not-accessible | OID for the Component name. |
| STR trapFileName | 1.3.6.1.4.1.562.14.2.3.2 | DisplayString | not-accessible | OID for file Name. |
| STR trapDate | 1.3.6.1.4.1.562.14.2.3.3 | TimeString | not-accessible | OID for the date. |
| STR trapGenericStr1 | 1.3.6.1.4.1.562.14.2.3.4 | DisplayString | not-accessible | OID for the generic data. |
| INT trapIdKey | 1.3.6.1.4.1.562.14.2.3.5 | INTEGER | not-accessible | OID for the identification key. |
| IP trapIPAddress | 1.3.6.1.4.1.562.14.2.3.6 | IpAddress | not-accessible | OID for IP address. |
| STR trapName | 1.3.6.1.4.1.562.14.2.3.7 | DisplayString | not-accessible | OID for configured name associated with an IpAddress. |
| STR trapTimeStamp | 1.3.6.1.4.1.562.14.2.3.8 | DisplayString | not-accessible | Indicates the time at which the alarm occurred. |
| alarms | 1.3.6.1.4.1.562.14.2.4 | |||
| GAU alarmMaskInt1 | 1.3.6.1.4.1.562.14.2.4.1 | Gauge | read-write | The value of this bit mask reflects the current filtering policy of CSG events and alarms. Management stations which wish to not receive certain events or alarm types from the CSG can modify this value as needed. Note, however, that changes in the filtration policy affect what is received by all management stations. Initially, the bit mask is set so that all bits are in a false state. Each bit in a true state reflects a currently filtered event, alarm, or alarm type. The actual bit position meanings are given below. Bit 0 is LSB. Bits 0 = Generic Normal Alarm 1 = Generic Warning Alarm 2 = Generic Minor Alarm 3 = Generic Major Alarm 4 = Generic Critical Alarm 5 = Partition Space Alarm 6 = Home Gateway Failure Alarm 7 = Component Not In Provisioned State Alarm 8 = Component Debug On Alarm 9 = Component Multiple Restart Alarm 10 = Component Restart Warning 11 = NAS Registration Failure Warning 12 = NAS Failure Alarm 13 = File Deletion Warning 14 = File Backup Warning 15 = Sysman Restart Warning 16 = File Access Warning 17 = Home Gateway/NAS Provisioning Mismatch Warning 18 = SS7 Link Failure Alarm 19 = SS7 Link Congestion Alarm 20 = ISUP Failure Alarm 21 = ISUP Congestion Alarm 22 = SS7 FEP Congestion Alarm 23 = SS7 BEP Congestion Alarm 24 = High Availability Peer Contact Lost Alarm 25 = SS7 MTP3 Congestion Alarm 26 = SS7 MTP2 Trunk Failure Alarm 27 = SS7 Linkset Failure Alarm 28 = SS7 Destination Inaccessible Alarm 29 = SS7 Destination Congested Alarm 30 = SS7 Link Alignment Failure Alarm |
| GAU alarmStatusInt1 | 1.3.6.1.4.1.562.14.2.4.2 | Gauge | read-only | The value of this bit mask indicates that current status of CSG component alarms. Each components is represented by a single bit within the range occupied by each component alarm type. Each bit in a true state reflects a currently raised alarm. The actual bit position meanings are given below. Bit 0 is the LSB. Bits 0-15 = Component Not In Provisioned State Alarm 16-31 = Component Multi Restart Alarm |
| GAU alarmStatusInt2 | 1.3.6.1.4.1.562.14.2.4.3 | Gauge | read-only | The value of this bit mask indicates the current status of active CSG alarms. Component-related alarms occupy a range of bits: each bit within that range represents the alarm status for a particular component. Each bit in a true state reflects a currently raised alarm. The actual bit position meanings are given below. Bit 0 is the LSB. Bits 0-15 = Component Debug On Alarm 16-23 = Partition Space Alarm 24 = Home Gateway Failure Alarm 25 = NAS Failure Alarm 26 = SS7 Link Failure Alarm 27 = SS7 Link Congestion Alarm 28 = ISUP Failure Alarm 29 = ISUP Congestion Alarm 30 = High Availability Peer Contact Lost Alarm 31 = SS7 MTP3 Congestion Alarm |
| GAU alarmStatusInt3 | 1.3.6.1.4.1.562.14.2.4.4 | Gauge | read-only | The value of this bit mask indicates the current status of active CSG alarms. Each bit in a true state reflects a currently raised alarm. The actual bit position meanings are given below. Bit 0 is the LSB. Bits 0 = SS7 MTP2 Trunk Failure Alarm 1 = SS7 Linkset Failure Alarm 2 = SS7 Destination Inaccessible Alarm 3 = SS7 Destination Congestion Alarm 4 = SS7 Link Alignment Failure Alarm 5 = CSG Complex Status Alarm 6 = External Ethernet Alarm |
| GAU alarmMaskInt2 | 1.3.6.1.4.1.562.14.2.4.5 | Gauge | read-write | The value of this bit mask reflects the current additional filtering policy of CSG events and alarms. Management stations which wish to not receive certain events or alarm types from the CSG can modify this value as needed. Note, however, that changes in the filtration policy affect what is received by all management stations. Initially, the bit mask is set so that all bits are in a false state. Each bit in a true state reflects a currently filtered event, alarm, or alarm type. The actual bit position meanings are given below. Bit 0 is LSB. Bits 0 = External Ethernet Alarm 1 = Cluster Information retrieval Alarm |
| hgAlarmTable | 1.3.6.1.4.1.562.14.2.4.10 | not-accessible | The HgAlarmTable contains information about all the current HG alarms | |
| hgAlarmTableEntry | 1.3.6.1.4.1.562.14.2.4.10.1 | not-accessible | An entry in the HgAlarmTable. HgAlarmTable entries are indexed by componentIndex, which is an integer. | |
| INT hgIndex | 1.3.6.1.4.1.562.14.2.4.10.1.1 | INTEGER | not-accessible | Identifies the n'th position in the table. |
| STR hgName | 1.3.6.1.4.1.562.14.2.4.10.1.2 | DisplayString | read-only | The Home gateway to be used as index |
| INT hgKey | 1.3.6.1.4.1.562.14.2.4.10.1.3 | INTEGER | read-only | Unique identifier for the HgFailure alarm |
| STR hgAlarmTimeStamp | 1.3.6.1.4.1.562.14.2.4.10.1.4 | TimeString | read-only | Indicates the time of the HG Alarm. |
| IP hgIPAddress | 1.3.6.1.4.1.562.14.2.4.10.1.5 | IpAddress | read-only | This object identifies the IP Address of the machine which sent the alarm. |
| nasAlarmTable | 1.3.6.1.4.1.562.14.2.4.11 | not-accessible | The NasAlarmTable contains information about all the current NAS alarms | |
| nasAlarmTableEntry | 1.3.6.1.4.1.562.14.2.4.11.1 | not-accessible | An entry in the NasAlarmTable. NasAlarmTable entries are indexed by nasIndex, which is an integer. | |
| INT nasIndex | 1.3.6.1.4.1.562.14.2.4.11.1.1 | INTEGER | not-accessible | Identifies the n'th position in the table. |
| STR nasName | 1.3.6.1.4.1.562.14.2.4.11.1.2 | DisplayString | read-only | The NAS Name |
| INT nasKey | 1.3.6.1.4.1.562.14.2.4.11.1.3 | INTEGER | read-only | Unique identifier for the NAS Failure alarm |
| STR nasAlarmTimeStamp | 1.3.6.1.4.1.562.14.2.4.11.1.4 | TimeString | read-only | Indicates the time of the NAS Alarm. |
| IP nasIPAddress | 1.3.6.1.4.1.562.14.2.4.11.1.5 | IpAddress | read-only | This object identifies the IP Address of the machine which sent the alarm. |
| STR nasCmplxName | 1.3.6.1.4.1.562.14.2.4.11.1.6 | DisplayString | read-only | The complex which this alarm is raised against. |
| ss7LinkFailureAlarmTable | 1.3.6.1.4.1.562.14.2.4.12 | not-accessible | The SS7LinkFailureAlarmTable contains alarms for SS7 link failures. | |
| ss7LinkFailureAlarmTableEntry | 1.3.6.1.4.1.562.14.2.4.12.1 | not-accessible | This object defines a row within the SS7 Link Failure Alarm Table. A row can be uniquely identified with the row index. | |
| INT lfIndex | 1.3.6.1.4.1.562.14.2.4.12.1.1 | INTEGER | not-accessible | Identifies the row number in the table. |
| INT lfKey | 1.3.6.1.4.1.562.14.2.4.12.1.2 | INTEGER | read-only | Unique identifier for the alarm. |
| IP lfIPAddress | 1.3.6.1.4.1.562.14.2.4.12.1.3 | IpAddress | read-only | This object identifies the IP Address of the machine which sent the alarm. |
| INT lfLinkCode | 1.3.6.1.4.1.562.14.2.4.12.1.5 | INTEGER | read-only | This object identifies the signalling link code (SLC) of the failed link. |
| STR lfTimeStamp | 1.3.6.1.4.1.562.14.2.4.12.1.6 | TimeString | read-only | Indicates the time of the alarm. |
| STR lfName | 1.3.6.1.4.1.562.14.2.4.12.1.7 | DisplayString | read-only | Indicates the configured name for the machine which sent the alarm. |
| STR lfCardId | 1.3.6.1.4.1.562.14.2.4.12.1.8 | DisplayString | read-only | This object identifies the device that hosts the failed link. It provides a physical description of the device, as well as its slot number. |
| STR lfLinkSet | 1.3.6.1.4.1.562.14.2.4.12.1.9 | DisplayString | read-only | This object identifies the linkset associated with the link via its adjacent point code. |
| ss7LinkCongestionAlarmTable | 1.3.6.1.4.1.562.14.2.4.13 | not-accessible | The SS7LinkCongestionAlarmTable contains alarms to indicate congestion on an SS7 link. | |
| ss7LinkCongestionAlarmTableEntry | 1.3.6.1.4.1.562.14.2.4.13.1 | not-accessible | This object defines a row within the SS7 Link Congestion Alarm Table. A row can be uniquely identified with the row index. | |
| INT lcIndex | 1.3.6.1.4.1.562.14.2.4.13.1.1 | INTEGER | not-accessible | Identifies the row number in the table. |
| INT lcKey | 1.3.6.1.4.1.562.14.2.4.13.1.2 | INTEGER | read-only | Unique identifier for the alarm. |
| IP lcIPAddress | 1.3.6.1.4.1.562.14.2.4.13.1.3 | IpAddress | read-only | This object identifies the IP Address of the machine which sent the alarm. |
| INT lcLinkCode | 1.3.6.1.4.1.562.14.2.4.13.1.4 | INTEGER | read-only | This object identifies the signalling link code (SLC) of the affected link. |
| STR lcTimeStamp | 1.3.6.1.4.1.562.14.2.4.13.1.5 | TimeString | read-only | Indicates the time of the alarm. |
| STR lcName | 1.3.6.1.4.1.562.14.2.4.13.1.6 | DisplayString | read-only | Indicates the configured name for the machine which sent the alarm. |
| STR lcCardId | 1.3.6.1.4.1.562.14.2.4.13.1.7 | DisplayString | read-only | This object identifies the device that hosts the failed link. It provides a physical description of the device, as well as its slot number. |
| STR lcLinkSet | 1.3.6.1.4.1.562.14.2.4.13.1.8 | DisplayString | read-only | This object identifies the linkset associated with the link via its adjacent point code. |
| ss7ISUPFailureAlarmTable | 1.3.6.1.4.1.562.14.2.4.14 | not-accessible | The SS7ISUPFailureAlarmTable contains alarms for SS7 ISUP protocol stack failures. | |
| ss7ISUPFailureAlarmTableEntry | 1.3.6.1.4.1.562.14.2.4.14.1 | not-accessible | This object defines a row within the SS7 ISUP Failure Alarm Table. A row can be uniquely identified with the row index. | |
| INT ifIndex | 1.3.6.1.4.1.562.14.2.4.14.1.1 | INTEGER | not-accessible | Identifies the row number in the table. |
| INT ifKey | 1.3.6.1.4.1.562.14.2.4.14.1.2 | INTEGER | read-only | Unique identifier for the alarm. |
| IP ifIPAddress | 1.3.6.1.4.1.562.14.2.4.14.1.3 | IpAddress | read-only | This object identifies the IP Address of the machine which sent the alarm. |
| STR ifTimeStamp | 1.3.6.1.4.1.562.14.2.4.14.1.4 | TimeString | read-only | Indicates the time of the alarm. |
| STR ifName | 1.3.6.1.4.1.562.14.2.4.14.1.5 | DisplayString | read-only | Indicates the configured name for the machine which sent the alarm. |
| ss7ISUPCongestionAlarmTable | 1.3.6.1.4.1.562.14.2.4.15 | not-accessible | The SS7ISUPCongestionAlarmTable contains alarms to indicate congestion with an ISUP protocol stack. | |
| ss7ISUPCongestionAlarmTableEntry | 1.3.6.1.4.1.562.14.2.4.15.1 | not-accessible | This object defines a row within the SS7 ISUP Congestion Alarm Table. A row can be uniquely identified with the row index. | |
| INT icIndex | 1.3.6.1.4.1.562.14.2.4.15.1.1 | INTEGER | not-accessible | Identifies the row number in the table. |
| INT icKey | 1.3.6.1.4.1.562.14.2.4.15.1.2 | INTEGER | read-only | Unique identifier for the alarm. |
| IP icIPAddress | 1.3.6.1.4.1.562.14.2.4.15.1.3 | IpAddress | read-only | This object identifies the IP Address of the machine which sent the alarm. |
| INT icCongestionLevel | 1.3.6.1.4.1.562.14.2.4.15.1.4 | INTEGER | read-only | This object indicates the congestion level with an ISUP protocol stack. Possible congestion levels are: (0) Normal (1) Congestion |
| STR icTimeStamp | 1.3.6.1.4.1.562.14.2.4.15.1.5 | TimeString | read-only | Indicates the time of the alarm. |
| STR icName | 1.3.6.1.4.1.562.14.2.4.15.1.6 | DisplayString | read-only | Indicates the configured name for the machine which sent the alarm. |
| ss7MTP3CongestionAlarmTable | 1.3.6.1.4.1.562.14.2.4.16 | not-accessible | The SS7MTP3CongestionAlarmTable contains alarms to indicate congestion on an MTP3 link. | |
| ss7MTP3CongestionAlarmTableEntry | 1.3.6.1.4.1.562.14.2.4.16.1 | not-accessible | This object defines a row within the SS7 MTP3 Congestion Alarm Table. A row can be uniquely identified with the row index. | |
| INT mtp3Index | 1.3.6.1.4.1.562.14.2.4.16.1.1 | INTEGER | not-accessible | Identifies the row number in the table. |
| INT mtp3Key | 1.3.6.1.4.1.562.14.2.4.16.1.2 | INTEGER | read-only | Unique identifier for the alarm. |
| IP mtp3IPAddress | 1.3.6.1.4.1.562.14.2.4.16.1.3 | IpAddress | read-only | This object identifies the IP Address of the machine which sent the alarm. |
| INT mtp3CongestionLevel | 1.3.6.1.4.1.562.14.2.4.16.1.4 | INTEGER | read-only | This object indicates the congestion level on a problem SS7 Link. Possible congestion values are: (0) Normal (1) Minor (2) Major (3) Critical |
| STR mtp3TimeStamp | 1.3.6.1.4.1.562.14.2.4.16.1.5 | TimeString | read-only | Indicates the time of the alarm. |
| STR mtp3Name | 1.3.6.1.4.1.562.14.2.4.16.1.6 | DisplayString | read-only | Represents the configured name of the machine which sent the alarm. |
| ss7MTP2TrunkFailureAlarmTable | 1.3.6.1.4.1.562.14.2.4.17 | not-accessible | The SS7MTP2TrunkFailureAlarmTable contains alarms to indicate MTP2 trunk failures. | |
| ss7MTP2TrunkFailureAlarmTableEntry | 1.3.6.1.4.1.562.14.2.4.17.1 | not-accessible | This object defines a row within the SS7 MTP2 Failure Alarm Table. A row can be uniquely identified with the row index. | |
| INT mtp2Index | 1.3.6.1.4.1.562.14.2.4.17.1.1 | INTEGER | not-accessible | Identifies the row number in the table. |
| INT mtp2Key | 1.3.6.1.4.1.562.14.2.4.17.1.2 | INTEGER | read-only | Unique identifier for the alarm. |
| IP mtp2IPAddress | 1.3.6.1.4.1.562.14.2.4.17.1.3 | IpAddress | read-only | This object identifies the IP Address of the machine which sent the alarm. |
| STR mtp2Name | 1.3.6.1.4.1.562.14.2.4.17.1.4 | DisplayString | read-only | This object identifies the configured name of the machine which sent the alarm. |
| STR mtp2CardId | 1.3.6.1.4.1.562.14.2.4.17.1.5 | DisplayString | read-only | This object indicates the device upon which the affected trunk is hosted. The string contains a physical description of the device, as well as its slot number. |
| MTP mtp2AlarmCondition | 1.3.6.1.4.1.562.14.2.4.17.1.6 | MTP2AlarmConditionType | read-only | This object indicates which of the possible alarm conditions is in effect. Alarms are not nested: a new alarm is only reported if there is no current alarm condition. |
| STR mtp2TimeStamp | 1.3.6.1.4.1.562.14.2.4.17.1.7 | TimeString | read-only | Indicates the time of the alarm. |
| ss7LinksetFailureAlarmTable | 1.3.6.1.4.1.562.14.2.4.18 | not-accessible | The SS7LinksetFailureAlarmTable contains alarms to indicate failure on an CSG linkset. | |
| ss7LinksetFailureAlarmTableEntry | 1.3.6.1.4.1.562.14.2.4.18.1 | not-accessible | This object defines a row within the SS7 Linkset Failure Alarm Table. A row can be uniquely identified with the row index. | |
| INT lsFailureIndex | 1.3.6.1.4.1.562.14.2.4.18.1.1 | INTEGER | not-accessible | Identifies the row number in the table. |
| INT lsFailureKey | 1.3.6.1.4.1.562.14.2.4.18.1.2 | INTEGER | read-only | Unique identifier for the alarm. |
| IP lsFailureIPAddress | 1.3.6.1.4.1.562.14.2.4.18.1.3 | IpAddress | read-only | This object identifies the IP Address of the machine which sent the alarm. |
| STR lsFailureName | 1.3.6.1.4.1.562.14.2.4.18.1.4 | DisplayString | read-only | Represents the configured name of the machine which sent the alarm. |
| STR lsFailurePointcode | 1.3.6.1.4.1.562.14.2.4.18.1.5 | DisplayString | read-only | This object indicates the pointcode associated with the linkset. |
| STR lsFailureTimeStamp | 1.3.6.1.4.1.562.14.2.4.18.1.6 | TimeString | read-only | Indicates the time of the alarm. |
| ss7DestinationInaccessibleAlarmTable | 1.3.6.1.4.1.562.14.2.4.19 | not-accessible | The SS7DestinationAccessAlarmTable contains alarms which indicate inaccessible signalling destinations. | |
| ss7DestinationInaccessibleAlarmTableEntry | 1.3.6.1.4.1.562.14.2.4.19.1 | not-accessible | This object defines a row within the SS7 Destination Inaccessible Alarm Table. A row can be uniquely identified with the row index. | |
| INT destInaccessIndex | 1.3.6.1.4.1.562.14.2.4.19.1.1 | INTEGER | not-accessible | Identifies the row number in the table. |
| INT destInaccessKey | 1.3.6.1.4.1.562.14.2.4.19.1.2 | INTEGER | read-only | Unique identifier for the alarm. |
| IP destInaccessIPAddress | 1.3.6.1.4.1.562.14.2.4.19.1.3 | IpAddress | read-only | This object identifies the IP Address of the machine which sent the alarm. |
| STR destInaccessName | 1.3.6.1.4.1.562.14.2.4.19.1.4 | DisplayString | read-only | Represents the configured name of the machine which sent the alarm. |
| STR destInaccessPointcode | 1.3.6.1.4.1.562.14.2.4.19.1.5 | DisplayString | read-only | This object indicates the point code of the inaccessible signalling destination. |
| STR destInaccessTimeStamp | 1.3.6.1.4.1.562.14.2.4.19.1.6 | TimeString | read-only | Indicates the time of the alarm. |
| ss7DestinationCongestedAlarmTable | 1.3.6.1.4.1.562.14.2.4.20 | not-accessible | The SS7DestinationCongestedAlarmTable contains alarms to indicate congestion on the given destination. | |
| ss7DestinationCongestedAlarmTableEntry | 1.3.6.1.4.1.562.14.2.4.20.1 | not-accessible | This object defines a row within the SS7 Destination Congestion Table. A row can be uniquely identified with the row index. | |
| INT destCongestIndex | 1.3.6.1.4.1.562.14.2.4.20.1.1 | INTEGER | not-accessible | Identifies the row number in the table. |
| INT destCongestKey | 1.3.6.1.4.1.562.14.2.4.20.1.2 | INTEGER | read-only | Unique identifier for the alarm. |
| IP destCongestIPAddress | 1.3.6.1.4.1.562.14.2.4.20.1.3 | IpAddress | read-only | This object identifies the IP Address of the machine which sent the alarm. |
| STR destCongestName | 1.3.6.1.4.1.562.14.2.4.20.1.4 | DisplayString | read-only | Represents the configured name of the machine which sent the alarm. |
| STR destCongestPointcode | 1.3.6.1.4.1.562.14.2.4.20.1.5 | DisplayString | read-only | This object indicates the pointcode of the congested destination. |
| INT destCongestCongestionLevel | 1.3.6.1.4.1.562.14.2.4.20.1.6 | INTEGER | read-only | This object indicates the congestion level on a problem SS7 pointcode. Possible congestion values are: (0) Normal (1) Minor (2) Major (3) Critical |
| STR destCongestTimeStamp | 1.3.6.1.4.1.562.14.2.4.20.1.7 | TimeString | read-only | Indicates the time of the alarm. |
| ss7LinkAlignmentAlarmTable | 1.3.6.1.4.1.562.14.2.4.21 | not-accessible | The SS7LinkAlignmentAlarmTable contains alarms to indicate congestion on the CSG. | |
| ss7LinkAlignmentAlarmTableEntry | 1.3.6.1.4.1.562.14.2.4.21.1 | not-accessible | This object defines a row within the SS7 Link Alignment Alarm Table. A row can be uniquely identified with the row index. | |
| INT linkAlignIndex | 1.3.6.1.4.1.562.14.2.4.21.1.1 | INTEGER | not-accessible | Identifies the row number in the table. |
| INT linkAlignKey | 1.3.6.1.4.1.562.14.2.4.21.1.2 | INTEGER | read-only | Unique identifier for the alarm. |
| IP linkAlignIPAddress | 1.3.6.1.4.1.562.14.2.4.21.1.3 | IpAddress | read-only | This object identifies the IP Address of the machine which sent the alarm. |
| STR linkAlignName | 1.3.6.1.4.1.562.14.2.4.21.1.4 | DisplayString | read-only | Represents the configured name of the machine which sent the alarm. |
| INT linkAlignLinkCode | 1.3.6.1.4.1.562.14.2.4.21.1.5 | INTEGER | read-only | This object identifies the signalling link code (SLC) of the affected link. |
| STR linkAlignTimeStamp | 1.3.6.1.4.1.562.14.2.4.21.1.6 | TimeString | read-only | Indicates the time of the alarm. |
| STR linkAlignCardId | 1.3.6.1.4.1.562.14.2.4.21.1.7 | DisplayString | read-only | This object identifies the device that hosts the failed link. It provides a physical description of the device, as well as its slot number. |
| STR linkAlignLinkSet | 1.3.6.1.4.1.562.14.2.4.21.1.8 | DisplayString | read-only | This object identifies the linkset associated with the link via its adjacent point code. |
| csgComplexStateTrapInfo | 1.3.6.1.4.1.562.14.2.4.22 | |||
| STR cplxName | 1.3.6.1.4.1.562.14.2.4.22.1 | DisplayString | read-only | CLLI, A unique identifier of the CSG Complex. |
| STR cplxLocEthernetName | 1.3.6.1.4.1.562.14.2.4.22.2 | DisplayString | read-only | The EthernetName attribute value of the node. |
| IP cplxLocEthernetIP | 1.3.6.1.4.1.562.14.2.4.22.3 | IpAddress | read-only | The EthernetIP attribute value of the node. |
| STR cplxLocOperationalState | 1.3.6.1.4.1.562.14.2.4.22.4 | DisplayString | read-only | The OperationalState of the node. Possible values are: UNKNOWN, ENABLED, ENABLED_NETDSC, ENABLED_NETPAR, DISABLED |
| STR cplxLocStandbyState | 1.3.6.1.4.1.562.14.2.4.22.5 | DisplayString | read-only | The StandbyState attribute value of the node. Possible values are: UNKNOWN, HOT_STANDBY, COLD_STANDBY, WARM_STANDBY, PROVIDING_SERVICE |
| STR cplxLocAvailabilityState | 1.3.6.1.4.1.562.14.2.4.22.6 | DisplayString | read-only | The AvailabilityState attribute value of the node. Possible values are: UNKNOWN, AVAILABLE, DEGRADED, OFFLINE |
| STR cplxMateEthernetName | 1.3.6.1.4.1.562.14.2.4.22.7 | DisplayString | read-only | The EthernetName attribute value of the mate node. |
| IP cplxMateEthernetIP | 1.3.6.1.4.1.562.14.2.4.22.8 | IpAddress | read-only | The EthernetIP attribute value of the mate node. |
| STR cplxMateOperationalState | 1.3.6.1.4.1.562.14.2.4.22.9 | DisplayString | read-only | The OperationalState of the mate node. Possible values are: UNKNOWN, ENABLED, ENABLED_NETDSC, ENABLED_NETPAR, DISABLED |
| STR cplxMateStandbyState | 1.3.6.1.4.1.562.14.2.4.22.10 | DisplayString | read-only | The StandbyState attribute value of the mate node. Possible values are: UNKNOWN, HOT_STANDBY, COLD_STANDBY, WARM_STANDBY, PROVIDING_SERVICE |
| STR cplxMateAvailabilityState | 1.3.6.1.4.1.562.14.2.4.22.11 | DisplayString | read-only | The AvailabilityState attribute value of the mate node. Possible values are: UNKNOWN, AVAILABLE, DEGRADED, OFFLINE |
| STR cplxAlarmStatus | 1.3.6.1.4.1.562.14.2.4.22.12 | DisplayString | read-only | This object indicates the alarm status of the CSG Complex. Possible status are: NORMAL, MAJOR, CRITICAL |
| ncServer | 1.3.6.1.4.1.562.14.2.5 | |||
| lostServerAlarmTable | 1.3.6.1.4.1.562.14.2.5.1 | not-accessible | ||
| lostServerAlarmTableEntry | 1.3.6.1.4.1.562.14.2.5.1.1 | not-accessible | This object defines a row within the Lost Server Alarm Table. A row can be uniquely identified with the row index. | |
| INT lsIndex | 1.3.6.1.4.1.562.14.2.5.1.1.1 | INTEGER | not-accessible | Identifies the row number in the table. |
| INT lsKey | 1.3.6.1.4.1.562.14.2.5.1.1.2 | INTEGER | read-only | Unique identifier for the alarm. |
| IP lsIPAddress | 1.3.6.1.4.1.562.14.2.5.1.1.3 | IpAddress | read-only | This object identifies the IP Address of the machine which is lost. |
| STR lsName | 1.3.6.1.4.1.562.14.2.5.1.1.4 | DisplayString | read-only | The configured name associated with the IP Address of the machine which sent the alarm. |
| STR lsTimeStamp | 1.3.6.1.4.1.562.14.2.5.1.1.5 | TimeString | read-only | Indicates the time of the alarm. |
| INT ncServerId | 1.3.6.1.4.1.562.14.2.5.2 | INTEGER | read-only | The ServerId attribute value of the node. |
| STR ncServerName | 1.3.6.1.4.1.562.14.2.5.3 | DisplayString | read-only | The ServerName attribute value of the node. |
| STR ncHostName | 1.3.6.1.4.1.562.14.2.5.4 | DisplayString | read-only | The HostName attribute value of the node. |
| STR ncEthernetName | 1.3.6.1.4.1.562.14.2.5.5 | DisplayString | read-only | The EthernetName attribute value of the node. |
| IP ncEthernetIP | 1.3.6.1.4.1.562.14.2.5.6 | IpAddress | read-only | The EthernetIP attribute value of the node. |
| STR ncClusterName | 1.3.6.1.4.1.562.14.2.5.7 | DisplayString | read-only | The ClusterName attribute value of the node. |
| IP ncClusterIP | 1.3.6.1.4.1.562.14.2.5.8 | IpAddress | read-only | The ClusterIP attribute value of the node. |
| STR ncOperationalState | 1.3.6.1.4.1.562.14.2.5.9 | DisplayString | read-only | The OperationalState of the node. Possible values are: UNKNOWN, ENABLED, ENABLED_NETDSC, ENABLED_NETPAR, DISABLED |
| STR ncStandbyState | 1.3.6.1.4.1.562.14.2.5.10 | DisplayString | read-only | The StandbyState attribute value of the node. Possible values are: UNKNOWN, HOT_STANDBY, COLD_STANDBY, WARM_STANDBY, PROVIDING_SERVICE |
| STR ncAvailabilityState | 1.3.6.1.4.1.562.14.2.5.11 | DisplayString | read-only | The AvailabilityState attribute value of the node. Possible values are: UNKNOWN, AVAILABLE, DEGRADED, OFFLINE |
| STR ncSoftwareVersion | 1.3.6.1.4.1.562.14.2.5.12 | DisplayString | read-only | The SoftwareVersion attribute value of the node. |
| UPG ncUpgradeInProgress | 1.3.6.1.4.1.562.14.2.5.13 | UpgradeInProgress | read-only | The UpgradeInProgress attribute value of the node. Possible values are: 0 = UNKNOWN, 1 = ACTIVE, 2 = INACTIVE |
| ss7 | 1.3.6.1.4.1.562.14.2.6 | |||
| linksetTable | 1.3.6.1.4.1.562.14.2.6.1 | not-accessible | The linksetTable contains information about all the linksets on the CSG. | |
| linksetTableEntry | 1.3.6.1.4.1.562.14.2.6.1.1 | not-accessible | An entry in the linksetTable. Entries in the linkset table are indexed by linksetIndex, which is an integer. | |
| INT linksetIndex | 1.3.6.1.4.1.562.14.2.6.1.1.1 | INTEGER | not-accessible | Identifies the n'th position in the table. |
| INT linksetId | 1.3.6.1.4.1.562.14.2.6.1.1.2 | INTEGER | read-only | The id of the linkset to be used as index. |
| INT linksetAdjPointcode | 1.3.6.1.4.1.562.14.2.6.1.1.3 | INTEGER | read-only | The adjacent pointcode of the linkset. |
| LIN linksetState | 1.3.6.1.4.1.562.14.2.6.1.1.4 | LinksetState | read-only | The state of the linkset. |
| linkTable | 1.3.6.1.4.1.562.14.2.6.2 | not-accessible | The linkTable contains information about the links in a given linkset on the CSG. | |
| linkTableEntry | 1.3.6.1.4.1.562.14.2.6.2.1 | not-accessible | An entry in the linkTable. Entries in the link table table are indexed by linksetIndex and linkIndex, which are both integers. | |
| INT linkIndex | 1.3.6.1.4.1.562.14.2.6.2.1.1 | INTEGER | not-accessible | Identifies the n'th position in the table. |
| INT linkId | 1.3.6.1.4.1.562.14.2.6.2.1.2 | INTEGER | read-only | The id of the link. |
| STR linkHostname | 1.3.6.1.4.1.562.14.2.6.2.1.3 | DisplayString | read-only | The hostname of the CSG to which this link is attached. |
| STR linkCardDeviceName | 1.3.6.1.4.1.562.14.2.6.2.1.4 | DisplayString | read-only | The device name of the card upon which this link is hosted. |
| LIN linkState | 1.3.6.1.4.1.562.14.2.6.2.1.5 | LinkState | read-only | The state of the link. |
| LIN linkInhibitionState | 1.3.6.1.4.1.562.14.2.6.2.1.6 | LinkInhibitionState | read-only | The inhibition status of the link. |
| LIN linkCongestionState | 1.3.6.1.4.1.562.14.2.6.2.1.7 | LinkCongestionState | read-only | The congestion status of the link. |
| LIN linkAlignmentState | 1.3.6.1.4.1.562.14.2.6.2.1.8 | LinkAlignmentState | read-only | The alignment status of the link. |
| INT linkNumMSUReceived | 1.3.6.1.4.1.562.14.2.6.2.1.9 | INTEGER | read-only | This object supplies the number of MSU's received by the link. |
| INT linkNumMSUDiscarded | 1.3.6.1.4.1.562.14.2.6.2.1.10 | INTEGER | read-only | This object supplies the number of received MSU's discarded by the link. |
| INT linkNumMSUTransmitted | 1.3.6.1.4.1.562.14.2.6.2.1.11 | INTEGER | read-only | This object supplies the number of MSU's transmitted by the link. |
| INT linkNumSIFReceived | 1.3.6.1.4.1.562.14.2.6.2.1.12 | INTEGER | read-only | This object supplies the number of SIF and SIO octets received by the link. |
| INT linkNumSIFTransmitted | 1.3.6.1.4.1.562.14.2.6.2.1.13 | INTEGER | read-only | This object supplies the number of SIF and SIO octects transmitted by the link. |
| INT linkNumAutoChangeovers | 1.3.6.1.4.1.562.14.2.6.2.1.14 | INTEGER | read-only | This object supplies the number of automatic changeovers undergone by the link. |
| INT linkNumUnexpectedMsgs | 1.3.6.1.4.1.562.14.2.6.2.1.15 | INTEGER | read-only | This object supplies the number of unexpected messages received by the link. |
| routeTable | 1.3.6.1.4.1.562.14.2.6.3 | not-accessible | The routeTable contains information about the routes provisioned in the CSG complex. | |
| routeTableEntry | 1.3.6.1.4.1.562.14.2.6.3.1 | not-accessible | An entry in the routeTable. Entries in the route table are indexed by routeIndex, which is an integer. | |
| INT routeIndex | 1.3.6.1.4.1.562.14.2.6.3.1.1 | INTEGER | not-accessible | Identifies the n'th position in the table. |
| STR routeId | 1.3.6.1.4.1.562.14.2.6.3.1.2 | DisplayString | read-only | The unique identifier of the route. |
| STR routeDestPointCode | 1.3.6.1.4.1.562.14.2.6.3.1.3 | DisplayString | read-only | The destination point code associated with this route. |
| ROU routeState | 1.3.6.1.4.1.562.14.2.6.3.1.4 | RouteState | read-only | The current state of the route. |
| INT routeRank | 1.3.6.1.4.1.562.14.2.6.3.1.5 | INTEGER | read-only | Rank assigned to this route. |
| STR routeLinksetId | 1.3.6.1.4.1.562.14.2.6.3.1.6 | DisplayString | read-only | The linkset associated with this route. |
| destinationTable | 1.3.6.1.4.1.562.14.2.6.4 | not-accessible | The destinationTable contains information about the destinations provisioned in the CSG complex. | |
| destinationTableEntry | 1.3.6.1.4.1.562.14.2.6.4.1 | not-accessible | An entry in the destinationTable. Entries in the destination table are indexed by destIndex, which is an integer. | |
| INT destIndex | 1.3.6.1.4.1.562.14.2.6.4.1.1 | INTEGER | not-accessible | Identifies the n'th position in the table. |
| STR destPointCode | 1.3.6.1.4.1.562.14.2.6.4.1.2 | DisplayString | read-only | The destination point code of this destination. |
| DES destState | 1.3.6.1.4.1.562.14.2.6.4.1.3 | DestinationState | read-only | The current state of the destination. |
| INT destRuleId | 1.3.6.1.4.1.562.14.2.6.4.1.4 | INTEGER | read-only | Rule Identifier (for the routing table to be used) for this destination. |
| omData | 1.3.6.1.4.1.562.14.2.7 | |||
| linkOMs | 1.3.6.1.4.1.562.14.2.7.1 | |||
| linkOMTable | 1.3.6.1.4.1.562.14.2.7.1.1 | not-accessible | The LinkTable contains information about each signaling link on the CSG | |
| linkOMTableEntry | 1.3.6.1.4.1.562.14.2.7.1.1.1 | not-accessible | An entry in the LinkTable. Indexed by linkIndex | |
| INT linkOMId | 1.3.6.1.4.1.562.14.2.7.1.1.1.1 | INTEGER | read-only | The id of the link. |
| INT linkOMSetId | 1.3.6.1.4.1.562.14.2.7.1.1.1.2 | INTEGER | read-only | The id of the linkset. |
| CTR linkFailures | 1.3.6.1.4.1.562.14.2.7.1.1.1.3 | Counter | read-only | Number of times this signaling link has failed. |
| CTR linkCongestions | 1.3.6.1.4.1.562.14.2.7.1.1.1.4 | Counter | read-only | Number of times this signaling link has Congested. |
| CTR linkInhibits | 1.3.6.1.4.1.562.14.2.7.1.1.1.5 | Counter | read-only | Number of times this signaling link has been inhibited. |
| CTR linkTransmittedMSUs | 1.3.6.1.4.1.562.14.2.7.1.1.1.6 | Counter | read-only | Number of messages sent on this signaling link. |
| CTR linkReceivedMSUs | 1.3.6.1.4.1.562.14.2.7.1.1.1.7 | Counter | read-only | Number of messages received on this signaling link. |
| CTR linkRemoteProcOutages | 1.3.6.1.4.1.562.14.2.7.1.1.1.8 | Counter | read-only | Number of times the remote processor outgaes have been reported. |
| maintenanceOMs | 1.3.6.1.4.1.562.14.2.7.2 | |||
| CTR bLATimerExpiries | 1.3.6.1.4.1.562.14.2.7.2.1 | Counter | read-only | Number of times the BLA timer has expired. |
| CTR rLCTimerExpiries | 1.3.6.1.4.1.562.14.2.7.2.2 | Counter | read-only | Number of times the RLC timer has expired. |
| CTR uBATimerExpiries | 1.3.6.1.4.1.562.14.2.7.2.3 | Counter | read-only | Number of times the UBA timer has expired. |
| CTR rSATimerExpiries | 1.3.6.1.4.1.562.14.2.7.2.4 | Counter | read-only | Number of times the RSA timer has expired. |
| callOMs | 1.3.6.1.4.1.562.14.2.7.3 | |||
| CTR outCallAttempts | 1.3.6.1.4.1.562.14.2.7.3.1 | Counter | read-only | Total number of outgoing call legs attempted. |
| CTR outCallNormalCompletions | 1.3.6.1.4.1.562.14.2.7.3.2 | Counter | read-only | Total number of outgoing call legs completed normally. |
| CTR outCallAbnormalCompletions | 1.3.6.1.4.1.562.14.2.7.3.3 | Counter | read-only | Total number of outgoing call legs completed abnormally. |
| CTR userBusyOutCallRejects | 1.3.6.1.4.1.562.14.2.7.3.4 | Counter | read-only | Total Number of outgoing call legs rejected due to user busy signal. |
| CTR tempFailOutCallRejects | 1.3.6.1.4.1.562.14.2.7.3.5 | Counter | read-only | Total Number of outgoing call legs rejected due to temporary failure. |
| CTR userUnavailableOutCallRejects | 1.3.6.1.4.1.562.14.2.7.3.6 | Counter | read-only | Total number of outgoing call legs failed due to user not available. |
| CTR abnormalReleaseOutCallRejects | 1.3.6.1.4.1.562.14.2.7.3.7 | Counter | read-only | Total Number of outgoing call legs rejected due to abnormal release. |
| CTR otherOutCallRejects | 1.3.6.1.4.1.562.14.2.7.3.8 | Counter | read-only | Total Number of outgoing call legs rejected due to other reasons. |
| CTR cumulativeActiveOutCalls | 1.3.6.1.4.1.562.14.2.7.3.9 | Counter | read-only | Cumulatvie Number of outgoing call legs active so far. |
| CTR currentlyActiveOutCalls | 1.3.6.1.4.1.562.14.2.7.3.10 | Counter | read-only | Total Number of outgoing call legs currently active. |
| CTR currentlyActiveDigitalOutCalls | 1.3.6.1.4.1.562.14.2.7.3.11 | Counter | read-only | Total Number of outgoing digital call legs currently active. |
| CTR currentlyActiveAnalogOutCalls | 1.3.6.1.4.1.562.14.2.7.3.12 | Counter | read-only | Total Number of outgoing analog call legs currently active. |
| CTR inCallAttempts | 1.3.6.1.4.1.562.14.2.7.3.13 | Counter | read-only | Total number of incoming call legs attempted. |
| CTR inCallNormalCompletions | 1.3.6.1.4.1.562.14.2.7.3.14 | Counter | read-only | Total number of incoming call legs completed normally. |
| CTR inCallAbnormalCompletions | 1.3.6.1.4.1.562.14.2.7.3.15 | Counter | read-only | Total number of incoming call legs completed abnormally. |
| CTR userBusyInCallRejects | 1.3.6.1.4.1.562.14.2.7.3.16 | Counter | read-only | Total Number of incoming call legs rejected due to user busy signal. |
| CTR tempFailInCallRejects | 1.3.6.1.4.1.562.14.2.7.3.17 | Counter | read-only | Total Number of incoming call legs rejected due to temporary failure. |
| CTR userUnavailableInCallRejects | 1.3.6.1.4.1.562.14.2.7.3.18 | Counter | read-only | Total number of incoming call legs failed due to user not available. |
| CTR abnormalReleaseInCallRejects | 1.3.6.1.4.1.562.14.2.7.3.19 | Counter | read-only | Total Number of incoming call legs rejected due to abnormal release. |
| CTR otherInCallRejects | 1.3.6.1.4.1.562.14.2.7.3.20 | Counter | read-only | Total Number of incoming call legs rejected due to other reasons. |
| CTR cumulativeActiveInCalls | 1.3.6.1.4.1.562.14.2.7.3.21 | Counter | read-only | Cumulatvie Number of incoming call legs active so far. |
| CTR currentlyActiveInCalls | 1.3.6.1.4.1.562.14.2.7.3.22 | Counter | read-only | Total Number of incoming call legs currently active. |
| CTR currentlyActiveDigitalInCalls | 1.3.6.1.4.1.562.14.2.7.3.23 | Counter | read-only | Total Number of incoming digital call legs currently active. |
| CTR currentlyActiveAnalogInCalls | 1.3.6.1.4.1.562.14.2.7.3.24 | Counter | read-only | Total Number of incoming analog call legs currently active. |
| trunkGroupOMs | 1.3.6.1.4.1.562.14.2.7.4 | |||
| trunkCallOMTable | 1.3.6.1.4.1.562.14.2.7.4.1 | not-accessible | The TrunkCallOMTable contains call related OMs on a trunk group basis | |
| trunkCallOMTableEntry | 1.3.6.1.4.1.562.14.2.7.4.1.1 | not-accessible | An entry in the TrunkCallOMTable. Indexed by trunkCallOMIndex. | |
| INT trunkCallOMIndex | 1.3.6.1.4.1.562.14.2.7.4.1.1.1 | INTEGER | not-accessible | Identifies a trunk group index. |
| STR trunkGroupCLLI | 1.3.6.1.4.1.562.14.2.7.4.1.1.2 | DisplayString | read-only | The Common Language Location Identifier(CLLI), a unique alphanumeric value to identify this Trunk Group. |
| INT numberOfCircuits | 1.3.6.1.4.1.562.14.2.7.4.1.1.3 | INTEGER | read-only | Total Number of Circuits provisioned against this trunk group. |
| CTR trunkOutCallAttempts | 1.3.6.1.4.1.562.14.2.7.4.1.1.4 | Counter | read-only | Total number of outgoing call legs attempted. |
| CTR trunkOutCallNormalCompletions | 1.3.6.1.4.1.562.14.2.7.4.1.1.5 | Counter | read-only | Total number of outgoing call legs completed normally. |
| CTR trunkOutCallAbnormalCompletions | 1.3.6.1.4.1.562.14.2.7.4.1.1.6 | Counter | read-only | Total number of outgoing call legs completed abnormally. |
| CTR trunkUserBusyOutCallRejects | 1.3.6.1.4.1.562.14.2.7.4.1.1.7 | Counter | read-only | Total Number of outgoing call legs rejected due to user busy signal. |
| CTR trunkTempFailOutCallRejects | 1.3.6.1.4.1.562.14.2.7.4.1.1.8 | Counter | read-only | Total Number of outgoing call legs rejected due to temporary failure. |
| CTR trunkUserUnavailableOutCallRejects | 1.3.6.1.4.1.562.14.2.7.4.1.1.9 | Counter | read-only | Total number of outgoing call legs failed due to user not available. |
| CTR trunkAbnormalReleaseOutCallRejects | 1.3.6.1.4.1.562.14.2.7.4.1.1.10 | Counter | read-only | Total Number of outgoing call legs rejected due to abnormal release. |
| CTR trunkOtherOutCallRejects | 1.3.6.1.4.1.562.14.2.7.4.1.1.11 | Counter | read-only | Total Number of outgoing call legs rejected due to other reasons. |
| CTR trunkCumulativeActiveOutCalls | 1.3.6.1.4.1.562.14.2.7.4.1.1.12 | Counter | read-only | Cumulatvie Number of outgoing call legs active so far. |
| CTR trunkCurrentlyActiveOutCalls | 1.3.6.1.4.1.562.14.2.7.4.1.1.13 | Counter | read-only | Total Number of outgoing call legs currently active. |
| CTR trunkCurrentlyActiveDigitalOutCalls | 1.3.6.1.4.1.562.14.2.7.4.1.1.14 | Counter | read-only | Total Number of outgoing digital call legs currently active. |
| CTR trunkCurrentlyActiveAnalogOutCalls | 1.3.6.1.4.1.562.14.2.7.4.1.1.15 | Counter | read-only | Total Number of outgoing analog call legs currently active. |
| CTR trunkInCallAttempts | 1.3.6.1.4.1.562.14.2.7.4.1.1.16 | Counter | read-only | Total number of incoming call legs attempted. |
| CTR trunkInCallNormalCompletions | 1.3.6.1.4.1.562.14.2.7.4.1.1.17 | Counter | read-only | Total number of incoming call legs completed normally. |
| CTR trunkInCallAbnormalCompletions | 1.3.6.1.4.1.562.14.2.7.4.1.1.18 | Counter | read-only | Total number of incoming call legs completed abnormally. |
| CTR trunkUserBusyInCallRejects | 1.3.6.1.4.1.562.14.2.7.4.1.1.19 | Counter | read-only | Total Number of incoming call legs rejected due to user busy signal. |
| CTR trunkTempFailInCallRejects | 1.3.6.1.4.1.562.14.2.7.4.1.1.20 | Counter | read-only | Total Number of incoming call legs rejected due to temporary failure. |
| CTR trunkUserUnavailableInCallRejects | 1.3.6.1.4.1.562.14.2.7.4.1.1.21 | Counter | read-only | Total number of incoming call legs failed due to user not available. |
| CTR trunkAbnormalReleaseInCallRejects | 1.3.6.1.4.1.562.14.2.7.4.1.1.22 | Counter | read-only | Total Number of incoming call legs rejected due to abnormal release. |
| CTR trunkOtherInCallRejects | 1.3.6.1.4.1.562.14.2.7.4.1.1.23 | Counter | read-only | Total Number of incoming call legs rejected due to other reasons. |
| CTR trunkCumulativeActiveInCalls | 1.3.6.1.4.1.562.14.2.7.4.1.1.24 | Counter | read-only | Cumulatvie Number of incoming call legs active so far. |
| CTR trunkCurrentlyActiveInCalls | 1.3.6.1.4.1.562.14.2.7.4.1.1.25 | Counter | read-only | Total Number of incoming call legs currently active. |
| CTR trunkCurrentlyActiveDigitalInCalls | 1.3.6.1.4.1.562.14.2.7.4.1.1.26 | Counter | read-only | Total Number of incoming digital call legs currently active. |
| CTR trunkCurrentlyActiveAnalogInCalls | 1.3.6.1.4.1.562.14.2.7.4.1.1.27 | Counter | read-only | Total Number of incoming analog call legs currently active. |
| INT trunkAllActiveCalls | 1.3.6.1.4.1.562.14.2.7.4.1.1.28 | INTEGER | read-only | Total number of currently active call legs (all type). |
| INT trunkOccupancyPerCCS | 1.3.6.1.4.1.562.14.2.7.4.1.1.29 | INTEGER | read-only | Trunk occupancy in Centum Call Seconds. |
| CTR trafficInCCSs | 1.3.6.1.4.1.562.14.2.7.4.1.1.30 | Counter | read-only | Scanned om for tgms that are call busy |
| CTR trafficInCCSIncomings | 1.3.6.1.4.1.562.14.2.7.4.1.1.31 | Counter | read-only | Scanned Om on tgms with an incoming call. |
| CTR localBusyInCCSs | 1.3.6.1.4.1.562.14.2.7.4.1.1.32 | Counter | read-only | Scanned om for tgms that are locally blocked. |
| CTR remoteBusyInCCSs | 1.3.6.1.4.1.562.14.2.7.4.1.1.33 | Counter | read-only | Scanned om for tgms that are remoteley blocked. |
| phoneNumberOMs | 1.3.6.1.4.1.562.14.2.7.5 | |||
| phoneCallOMTable | 1.3.6.1.4.1.562.14.2.7.5.1 | not-accessible | The PhoneCallOMTable contains call related OMs on a phone number basis | |
| phoneCallOMTableEntry | 1.3.6.1.4.1.562.14.2.7.5.1.1 | not-accessible | An entry in the PhoneCallOMTable. Indexed by phoneGroupIndex. | |
| INT phoneCallOMIndex | 1.3.6.1.4.1.562.14.2.7.5.1.1.1 | INTEGER | not-accessible | Uniquely identifies an entry in this table. |
| STR phoneNumber | 1.3.6.1.4.1.562.14.2.7.5.1.1.2 | DisplayString | read-only | Phone number for the underlying Call OM record. |
| CTR phoneDialCallAttempts | 1.3.6.1.4.1.562.14.2.7.5.1.1.3 | Counter | read-only | Total number of dial calls attempted. |
| CTR phoneDialCallNormalCompletions | 1.3.6.1.4.1.562.14.2.7.5.1.1.4 | Counter | read-only | Total number of dial calls completed normally. |
| CTR phoneDialCallAbnormalCompletions | 1.3.6.1.4.1.562.14.2.7.5.1.1.5 | Counter | read-only | Total number of dial calls completed abnormally. |
| CTR phoneUserBusyDialCallRejects | 1.3.6.1.4.1.562.14.2.7.5.1.1.6 | Counter | read-only | Total Number of dial calls rejected due to user busy signal. |
| CTR phoneTempFailDialCallRejects | 1.3.6.1.4.1.562.14.2.7.5.1.1.7 | Counter | read-only | Total Number of dial calls rejected due to temporary failure. |
| CTR phoneUserUnavailableDialCallRejects | 1.3.6.1.4.1.562.14.2.7.5.1.1.8 | Counter | read-only | Total number of dial calls failed due to user not available. |
| CTR phoneAbnormalReleaseDialCallRejects | 1.3.6.1.4.1.562.14.2.7.5.1.1.9 | Counter | read-only | Total Number of dial calls rejected due to abnormal release. |
| CTR phoneOtherDialCallRejects | 1.3.6.1.4.1.562.14.2.7.5.1.1.10 | Counter | read-only | Total Number of dial calls rejected due to other reasons. |
| CTR phoneCumulativeActiveDialCalls | 1.3.6.1.4.1.562.14.2.7.5.1.1.11 | Counter | read-only | Cumulatvie Number of dial calls active so far. |
| CTR phoneCurrentlyActiveDialCalls | 1.3.6.1.4.1.562.14.2.7.5.1.1.12 | Counter | read-only | Total Number of dial calls currently active. |
| CTR phoneCurrentlyActiveDigitalDialCalls | 1.3.6.1.4.1.562.14.2.7.5.1.1.13 | Counter | read-only | Total Number of digital dial calls currently active. |
| CTR phoneCurrentlyActiveAnalogDialCalls | 1.3.6.1.4.1.562.14.2.7.5.1.1.14 | Counter | read-only | Total Number of analog dial calls currently active. |
| systemOMs | 1.3.6.1.4.1.562.14.2.7.6 | |||
| STR csgComplexCLLI | 1.3.6.1.4.1.562.14.2.7.6.1 | DisplayString | read-only | A unique identifier of the CSG Complex. |
| STR serverHostName | 1.3.6.1.4.1.562.14.2.7.6.2 | DisplayString | read-only | Host Name of this server. |
| IP serverIpAddress | 1.3.6.1.4.1.562.14.2.7.6.3 | IpAddress | read-only | IP address of this server. |
| STR serverCLLI | 1.3.6.1.4.1.562.14.2.7.6.4 | DisplayString | read-only | A unique identifier of this server (common in the telco world). |
| STR mateServerHostName | 1.3.6.1.4.1.562.14.2.7.6.5 | DisplayString | read-only | Host Name of this server. |
| IP mateServerIpAddress | 1.3.6.1.4.1.562.14.2.7.6.6 | IpAddress | read-only | IP address of this server. |
| INT serverMemSize | 1.3.6.1.4.1.562.14.2.7.6.8 | INTEGER | read-only | Memory size in mega bytes of this server. |
| INT provisionedDPCs | 1.3.6.1.4.1.562.14.2.7.6.9 | INTEGER | read-only | Number of destination point codes provisioned. |
| INT provisionedCircuits | 1.3.6.1.4.1.562.14.2.7.6.10 | INTEGER | read-only | Number of circuits provisioned. |
| INT inserviceCircuits | 1.3.6.1.4.1.562.14.2.7.6.11 | INTEGER | read-only | Number of circuits in service. This number goes up or down at any given time. |
| INT provisionedNASes | 1.3.6.1.4.1.562.14.2.7.6.12 | INTEGER | read-only | Number of NASes provisioned. |
| INT aliveNASes | 1.3.6.1.4.1.562.14.2.7.6.13 | INTEGER | read-only | Number of NASes known to be alive. This number goes up or down at any given time. |
| INT inserviceNASes | 1.3.6.1.4.1.562.14.2.7.6.14 | INTEGER | read-only | Number of NASes in service. This number goes up or down at any given time. |
| INT provsionedCards | 1.3.6.1.4.1.562.14.2.7.6.15 | INTEGER | read-only | Number of NAS cards provisioned. |
| INT inserviceCards | 1.3.6.1.4.1.562.14.2.7.6.16 | INTEGER | read-only | Number of NAS cards in service. This number goes up or down at any given time. |
| INT provisionedPorts | 1.3.6.1.4.1.562.14.2.7.6.17 | INTEGER | read-only | Number of ports provisioned. |
| INT inservicePorts | 1.3.6.1.4.1.562.14.2.7.6.18 | INTEGER | read-only | Number of ports in service. This number goes up or down at any given time. |
| INT userCPUUsage | 1.3.6.1.4.1.562.14.2.7.6.19 | INTEGER | read-only | Percentage of CPU used in user domain. Survman computes this value in every 600 seconds. The value stored in the MIB will be the last one computed. |
| INT systemCPUUsage | 1.3.6.1.4.1.562.14.2.7.6.20 | INTEGER | read-only | Percentage of CPU used in system domain in this server. Survman computes this value in every 600 seconds. The value stored in the MIB will be the last one computed. |
| INT totalCPUUsage | 1.3.6.1.4.1.562.14.2.7.6.21 | INTEGER | read-only | Percentage of CPU used in total in this server Survman computes this value in every 600 seconds. The value stored in the MIB will be the last one computed. |
| INT maxCPUUsage | 1.3.6.1.4.1.562.14.2.7.6.22 | INTEGER | read-only | High water measurement. Maximum CPU Usage (%) in this server. Survman computes this value in every 600 seconds. The value stored in the MIB will be the last one computed. |
| INT avgLoad | 1.3.6.1.4.1.562.14.2.7.6.23 | INTEGER | read-only | Average CPU load factor in this server. Survman computes this value in every 600 seconds. The value stored in the MIB will be the last one computed. |
| INT systemCallRate | 1.3.6.1.4.1.562.14.2.7.6.24 | INTEGER | read-only | System Call rate (per second) in this Cserver. Survman computes this value in every 600 seconds. The value stored in the MIB will be the one computed the last time. |
| INT contextSwitchRate | 1.3.6.1.4.1.562.14.2.7.6.25 | INTEGER | read-only | Process context switching rate (per second) in this server. Survman computes this value in every 600 seconds. The value stored in the MIB will be the one computed the last time. |
| STR lastUpdateOMFile | 1.3.6.1.4.1.562.14.2.7.6.26 | DisplayString | read-only | Name of the last updated OM file. |
| nasOMs | 1.3.6.1.4.1.562.14.2.7.7 | |||
| nasCallOMTable | 1.3.6.1.4.1.562.14.2.7.7.1 | not-accessible | The NasCallOMTable contains call related OMs on a nas basis | |
| nasCallOMTableEntry | 1.3.6.1.4.1.562.14.2.7.7.1.1 | not-accessible | An entry in the NasCallOMTable. Indexed by nasCallOMIndex. | |
| INT nasCallOMIndex | 1.3.6.1.4.1.562.14.2.7.7.1.1.1 | INTEGER | not-accessible | Identifies a nas Call OM . |
| STR nasName1 | 1.3.6.1.4.1.562.14.2.7.7.1.1.2 | DisplayString | read-only | A unique alphanumeric value to identify this Nas. |
| INT numberOfPorts | 1.3.6.1.4.1.562.14.2.7.7.1.1.3 | INTEGER | read-only | Total Number of Ports provisioned against this nas. |
| CTR nasOutCallAttempts | 1.3.6.1.4.1.562.14.2.7.7.1.1.4 | Counter | read-only | Total number of outgoing call legs attempted. |
| CTR nasOutCallNormalCompletions | 1.3.6.1.4.1.562.14.2.7.7.1.1.5 | Counter | read-only | Total number of outgoing call legs completed normally. |
| CTR nasOutCallAbnormalCompletions | 1.3.6.1.4.1.562.14.2.7.7.1.1.6 | Counter | read-only | Total number of outgoing call legs completed abnormally. |
| CTR nasUserBusyOutCallRejects | 1.3.6.1.4.1.562.14.2.7.7.1.1.7 | Counter | read-only | Total Number of outgoing call legs rejected due to user busy signal. |
| CTR nasTempFailOutCallRejects | 1.3.6.1.4.1.562.14.2.7.7.1.1.8 | Counter | read-only | Total Number of outgoing call legs rejected due to temporary failure. |
| CTR nasUserUnavailableOutCallRejects | 1.3.6.1.4.1.562.14.2.7.7.1.1.9 | Counter | read-only | Total number of outgoing call legs failed due to user not available. |
| CTR nasAbnormalReleaseOutCallRejects | 1.3.6.1.4.1.562.14.2.7.7.1.1.10 | Counter | read-only | Total Number of outgoing call legs rejected due to abnormal release. |
| CTR nasOtherOutCallRejects | 1.3.6.1.4.1.562.14.2.7.7.1.1.11 | Counter | read-only | Total Number of outgoing call legs rejected due to other reasons. |
| CTR nasCumulativeActiveOutCalls | 1.3.6.1.4.1.562.14.2.7.7.1.1.12 | Counter | read-only | Cumulatvie Number of outgoing call legs active so far. |
| CTR nasCurrentlyActiveOutCalls | 1.3.6.1.4.1.562.14.2.7.7.1.1.13 | Counter | read-only | Total Number of outgoing call legs currently active. |
| CTR nasCurrentlyActiveDigitalOutCalls | 1.3.6.1.4.1.562.14.2.7.7.1.1.14 | Counter | read-only | Total Number of outgoing digital call legs currently active. |
| CTR nasCurrentlyActiveAnalogOutCalls | 1.3.6.1.4.1.562.14.2.7.7.1.1.15 | Counter | read-only | Total Number of outgoing analog call legs currently active. |
| CTR nasInCallAttempts | 1.3.6.1.4.1.562.14.2.7.7.1.1.16 | Counter | read-only | Total number of incoming call legs attempted. |
| CTR nasInCallNormalCompletions | 1.3.6.1.4.1.562.14.2.7.7.1.1.17 | Counter | read-only | Total number of incoming call legs completed normally. |
| CTR nasInCallAbnormalCompletions | 1.3.6.1.4.1.562.14.2.7.7.1.1.18 | Counter | read-only | Total number of incoming call legs completed abnormally. |
| CTR nasUserBusyInCallRejects | 1.3.6.1.4.1.562.14.2.7.7.1.1.19 | Counter | read-only | Total Number of incoming call legs rejected due to user busy signal. |
| CTR nasTempFailInCallRejects | 1.3.6.1.4.1.562.14.2.7.7.1.1.20 | Counter | read-only | Total Number of incoming call legs rejected due to temporary failure. |
| CTR nasUserUnavailableInCallRejects | 1.3.6.1.4.1.562.14.2.7.7.1.1.21 | Counter | read-only | Total number of incoming call legs failed due to user not available. |
| CTR nasAbnormalReleaseInCallRejects | 1.3.6.1.4.1.562.14.2.7.7.1.1.22 | Counter | read-only | Total Number of incoming call legs rejected due to abnormal release. |
| CTR nasOtherInCallRejects | 1.3.6.1.4.1.562.14.2.7.7.1.1.23 | Counter | read-only | Total Number of incoming call legs rejected due to other reasons. |
| CTR nasCumulativeActiveInCalls | 1.3.6.1.4.1.562.14.2.7.7.1.1.24 | Counter | read-only | Cumulatvie Number of incoming call legs active so far. |
| CTR nasCurrentlyActiveInCalls | 1.3.6.1.4.1.562.14.2.7.7.1.1.25 | Counter | read-only | Total Number of incoming call legs currently active. |
| CTR nasCurrentlyActiveDigitalInCalls | 1.3.6.1.4.1.562.14.2.7.7.1.1.26 | Counter | read-only | Total Number of incoming digital call legs currently active. |
| CTR nasCurrentlyActiveAnalogInCalls | 1.3.6.1.4.1.562.14.2.7.7.1.1.27 | Counter | read-only | Total Number of incoming analog call legs currently active. |
| INT nasAllActiveCalls | 1.3.6.1.4.1.562.14.2.7.7.1.1.28 | INTEGER | read-only | Total number of currently active call legs (all type). |
| INT nasMaxPortsUsed | 1.3.6.1.4.1.562.14.2.7.7.1.1.29 | INTEGER | read-only | Maximum number of ports used in this nas since the last system restart. |
| INT nasMinPortsUsed | 1.3.6.1.4.1.562.14.2.7.7.1.1.30 | INTEGER | read-only | Minimum number of ports used in this nas since the last system restart. |
| INT nasCurrentlyInUsePorts | 1.3.6.1.4.1.562.14.2.7.7.1.1.31 | INTEGER | read-only | Number of ports currently in use. |
RFC description
Nortel Internet Thruway controller (CSG) management MIB for dial access and network system monitoring.
Start monitoring Nortel Networks Internet Thruway (CSG) platform with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.