All MIBs › CISCO-WAN-TOPOLOGY-MIB › cwtGatewayNodeOperStatus
cwtGatewayNodeOperStatus
Module: CISCO-WAN-TOPOLOGY-MIB
OID (symbolic): CISCO-WAN-TOPOLOGY-MIB::cwtGatewayNodeOperStatus
OID (numeric): 1.3.6.1.4.1.9.9.234.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This is the operational status of the Gateway Node.
'disabled' indicates that this node is not a Gateway Node and no topology database is available on this node.
'enabled' indicates that this node has been configured as the Gateway Node and the topology database has been built.
'disabling' indicates that this node is no longer the Gateway Node and is in the process of deleting the topology database.
'enabling' indicates that this node has been configured as the Gateway Node and is in the process of building the topology database.
'enabledAndFull' indicates that this node has been configured as the Gateway Node but its topology database is full.
The management station should always poll this object first before taking action to:
a) 'enable' or 'disable' the Gateway Node b) remove an entry or entries from 'cwtNodeInfoTable' and its corresponding entries from 'cwtFeederInfoTable'.
If the object returns 'disabled', the management station can 'enable' the Gateway Node if it desires.
If the object returns 'enabled', the management station can 'disable' the Gateway Node if it desires.
If the object returns 'enabling' or 'disabling', the management station should not take any actions.
If the object returns 'enabledAndFull', the management station can take one of the following actions:
a) remove enties from the cwtNodeInfoTable b) 'disable' and then 'enable' the Gateway Node, which would cause the node to delete and then rebuild the topology database.
What is cwtGatewayNodeOperStatus?
This read-only enumeration (disabled, enabled, disabling, enabling, enabledAndFull) reports the actual operational state of the Gateway Node function on this switch, distinct from the administrative setting in cwtGatewayAdminStatus. An admin watches this to confirm a gateway role change has actually taken effect, since 'enabling' and 'disabling' represent in-progress transitions rather than completed ones. For example, seeing cwtGatewayNodeOperStatus stuck at 'enabling' well after setting cwtGatewayAdminStatus to enable would tell an admin the topology database build has not completed as expected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.234.1.1.2 snmpwalk -v2c -c public <target> CISCO-WAN-TOPOLOGY-MIB::cwtGatewayNodeOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.234.1.1.2.1 snmpget -v2c -c public <target> CISCO-WAN-TOPOLOGY-MIB::cwtGatewayNodeOperStatus.1
Start monitoring Cisco MGX/BPX WAN switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-TOPOLOGY-MIB::cwtGatewayNodeOperStatus OID value, configure state conditions and alerts, and monitor any Cisco MGX/BPX WAN switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.234 | ciscoWanTopologyMIB | CISCO-WAN-TOPOLOGY-MIB |
| 1.3.6.1.4.1.9.9.234.1 | ciscoWanTopologyMIBObjects | CISCO-WAN-TOPOLOGY-MIB |
| 1.3.6.1.4.1.9.9.234.1.1 | cwtSystemGroup | CISCO-WAN-TOPOLOGY-MIB |
| 1.3.6.1.4.1.9.9.234.1.1.2 | cwtGatewayNodeOperStatus | CISCO-WAN-TOPOLOGY-MIB |