All MIBs › CISCO-WAN-TOPOLOGY-MIB › cwtFeederType
cwtFeederType
Module: CISCO-WAN-TOPOLOGY-MIB
OID (symbolic): CISCO-WAN-TOPOLOGY-MIB::cwtFeederType
OID (numeric): 1.3.6.1.4.1.9.9.234.1.3.1.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This identifies the feeder type. fdrNON(12) is applicable when cwfLMIType is xLMI(2). Other values are applicable when cwtFeederLMIType is feeder(1). The possible values are : fdrIPX -- Feeder is an IPX node in a routing network fdrBPX -- Feeder is an BPX node in a routing network fdrIpxAF -- Feeder is a stand-alone IPX node fdrBASIS -- Feeder is a stand-alone BASIS node fdrUNKNOWN -- Feeder is unknown fdrUNI -- Feeder is a UNI AIT (phase 0) fdrAPS -- Feeder is an APS (Adjunct Processor Shelf) fdrIGX -- Feeder is an IGX node in a routing network fdrIgxAF -- Feeder is a stand-alone IGX node fdrVSI -- Feeder is an VSI Controller fdrPAR -- Feeder is a PAR fdrNON -- This is non-feeder type
What is cwtFeederType?
This read-only enumeration lists the specific feeder platform connected, with values such as fdrIPX, fdrBPX, fdrBASIS, fdrUNI, fdrIGX, and others, though the source description for this object is empty in this MIB. An admin uses the value to identify what kind of Cisco WAN switch platform (e.g., an IGX or BPX class device) is acting as a feeder to this node. For example, an admin planning a platform migration checks cwtFeederType across all feeder entries to inventory how many are still on the older fdrIPX platform versus newer types.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.234.1.3.1.1.9 snmpwalk -v2c -c public <target> CISCO-WAN-TOPOLOGY-MIB::cwtFeederType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.234.1.3.1.1.9.1 snmpget -v2c -c public <target> CISCO-WAN-TOPOLOGY-MIB::cwtFeederType.1
Start monitoring Cisco MGX/BPX WAN switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-TOPOLOGY-MIB::cwtFeederType OID value, configure state conditions and alerts, and monitor any Cisco MGX/BPX WAN switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.234 | ciscoWanTopologyMIB | CISCO-WAN-TOPOLOGY-MIB |
| 1.3.6.1.4.1.9.9.234.1 | ciscoWanTopologyMIBObjects | CISCO-WAN-TOPOLOGY-MIB |
| 1.3.6.1.4.1.9.9.234.1.3 | cwtFeederInfoGroup | CISCO-WAN-TOPOLOGY-MIB |
| 1.3.6.1.4.1.9.9.234.1.3.1 | cwtFeederInfoTable | CISCO-WAN-TOPOLOGY-MIB |
| 1.3.6.1.4.1.9.9.234.1.3.1.1 | cwtFeederInfoEntry | CISCO-WAN-TOPOLOGY-MIB |
| 1.3.6.1.4.1.9.9.234.1.3.1.1.9 | cwtFeederType | CISCO-WAN-TOPOLOGY-MIB |