CISCO-WAN-TOPOLOGY-MIB :: cwtSecIP

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-WAN-TOPOLOGY-MIB › cwtSecIP

cwtSecIP

Module: CISCO-WAN-TOPOLOGY-MIB

OID (symbolic): CISCO-WAN-TOPOLOGY-MIB::cwtSecIP

OID (numeric): 1.3.6.1.4.1.9.9.234.1.2.1.1.12

Node type: OBJECT-TYPE

Type: InetAddress

Access: read-write

Description: Secondary IP address of the corresponding node. This value is taken from the PNNI Nodal PTSE. This value is used by the NMS to manage the switch. Please refer to the Description section of cwtPrimIP for more information.

What is cwtSecIP?

This read-write InetAddress holds the node's secondary IP address, also taken from the PNNI Nodal PTSE, which the NMS uses to manage the switch if it cannot reach the node via the primary address in cwtPrimIP. An admin relies on this as the fallback management path, per the same behavior described for cwtPrimIP. For example, if the interface backing cwtPrimIP fails, the admin expects the NMS to reach the switch instead through the address in cwtSecIP.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.234.1.2.1.1.12
snmpwalk -v2c -c public <target> CISCO-WAN-TOPOLOGY-MIB::cwtSecIP

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.234.1.2.1.1.12.1
snmpget -v2c -c public <target> CISCO-WAN-TOPOLOGY-MIB::cwtSecIP.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.234.1.2.1.1.12.1 s <value>

Start monitoring Cisco MGX/BPX WAN switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-TOPOLOGY-MIB::cwtSecIP OID value, configure state conditions and alerts, and monitor any Cisco MGX/BPX WAN switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.234ciscoWanTopologyMIBCISCO-WAN-TOPOLOGY-MIB
1.3.6.1.4.1.9.9.234.1ciscoWanTopologyMIBObjectsCISCO-WAN-TOPOLOGY-MIB
1.3.6.1.4.1.9.9.234.1.2cwtNodalInfoGroupCISCO-WAN-TOPOLOGY-MIB
1.3.6.1.4.1.9.9.234.1.2.1cwtNodeInfoTableCISCO-WAN-TOPOLOGY-MIB
1.3.6.1.4.1.9.9.234.1.2.1.1cwtNodeInfoEntryCISCO-WAN-TOPOLOGY-MIB
1.3.6.1.4.1.9.9.234.1.2.1.1.12cwtSecIPCISCO-WAN-TOPOLOGY-MIB