All MIBs › CISCO-LWAPP-DOT11-CLIENT-MIB
Organization: Cisco Systems Inc.
Last Updated: 2020-05-13
Description: MIB for monitoring 802.11 wireless client associations, statistics, and status on Cisco LWAPP wireless LAN controllers
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CISCO-LWAPP-DOT11-CLIENT-MIB?
CISCO-LWAPP-DOT11-CLIENT-MIB is a Cisco-specific MIB for monitoring 802.11 wireless client devices associated to access points managed by a Cisco LWAPP-based wireless LAN controller (the Central Controller, or CC). It exposes per-client data including the client's MAC and IP address, association/connection status, the WLAN profile the client is using, the wireless protocol negotiated, and the specific access point and interface (radio) the client is attached to. Its monitoring value is centered on wireless client and software-level session status rather than physical hardware sensors: cldcClientStatus reveals whether a client is associated, authenticated, or disassociated, and cldcClientWgbStatus/cldcClientWgbMacAddress track workgroup bridge client state, letting an administrator detect roaming issues, authentication failures, or dropped wireless sessions in near real time. It depends on the broader Cisco LWAPP wireless architecture MIB family (e.g. the AP and radio MIBs identified by cldcApMacAddress and cldcIfType) since client entries are correlated back to a specific AP and radio interface. It is deployed on Cisco wireless LAN controllers (WLC) running LWAPP/CAPWAP to manage lightweight access points in enterprise Wi-Fi deployments. Each CISCO-LWAPP-DOT11-CLIENT-MIB OID under cldcClientTable corresponds to a specific wireless client's association record, making the module the primary SNMP source for client-level Wi-Fi session status on Cisco WLC deployments.
IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-LWAPP-DOT11-CLIENT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cisco wireless LAN controllers (WLC)
- Cisco lightweight (LWAPP/CAPWAP) access points
- 802.11 wireless client devices
Monitoring Examples
An administrator polls cldcClientTable/cldcClientEntry, keyed by cldcClientMacAddress, to check cldcClientStatus for a specific device and confirm it is associated versus authenticating or disassociated, alongside cldcClientWlanProfileName to see which SSID/WLAN policy it joined. cldcApMacAddress and cldcIfType identify which access point and radio interface the client is attached to, useful for spotting a client stuck roaming between APs or associated to a congested radio. cldcClientProtocol and cldcAssociationMode reveal whether the client negotiated a faster versus slower 802.11 rate, which can explain reported throughput complaints.
What Can Be Monitored
- wireless client association/connection status
- client MAC and IP address
- WLAN profile/SSID in use
- 802.11 protocol and association mode
- associated access point and radio interface
- workgroup bridge client status
This MIB depends on
Related MIBs
Imported Objects
From CISCO-LWAPP-AP-MIB
| cLAPGroupVlanName | |
| cLApDot11IfSlotId | OBJECT-TYPE |
| cLApDot11RadioChannelNumber | OBJECT-TYPE |
| cLApIfLoadChannelUtilization | |
| cLApLocation | |
| cLApName | OBJECT-TYPE |
| cLApSubMode |
From CISCO-LWAPP-MOBILITY-EXT-MIB
| cLMobilityExtMCClientAnchorMCGroupId | OBJECT-TYPE |
| cLMobilityExtMCClientAnchorMCPrivateAddress | OBJECT-TYPE |
| cLMobilityExtMCClientAnchorMCPrivateAddressType | OBJECT-TYPE |
| cLMobilityExtMCClientAssociatedMAAddress | OBJECT-TYPE |
| cLMobilityExtMCClientAssociatedMAAddressType | OBJECT-TYPE |
| cLMobilityExtMCClientAssociatedMCAddress | OBJECT-TYPE |
| cLMobilityExtMCClientAssociatedMCAddressType | OBJECT-TYPE |
| cLMobilityExtMCClientAssociatedMCGroupId | OBJECT-TYPE |
From CISCO-LWAPP-TC-MIB
| CLApIfType | |
| CLClientPowerSaveMode | |
| CLDot11ClientStatus | |
| CcxServiceVersion |
From CISCO-SMI
| ciscoMgmt | OBJECT-IDENTITY |
From CISCO-TC
| CiscoURLStringOrEmpty |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From Q-BRIDGE-MIB
| VlanId |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| MacAddress | |
| RowStatus | |
| TimeInterval | |
| TimeStamp | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| ciscoLwappDot11CCXClientMIBConform | 1.3.6.1.4.1.9.9.599.2.3 | |||
| NTF ciscoLwappDot11ClientAssocDataStatsTrap | 1.3.6.1.4.1.9.9.599.0.7 | The associate notification shall be sent when the Station sends a association frame. | ||
| NTF ciscoLwappDot11ClientAssocNacAlert | 1.3.6.1.4.1.9.9.599.0.2 | This notification is generated when the client on NAC enabled SSIDs complete layer2 authentication . This is to inform about client's presence to the NAC appliance. cldcClientWlanProfileName represents the profile name of the WLAN, this 802.11 wireless client is connected to. cldcClientIPAddress represents the unique ipaddress of the client. cldcApMacAddress represents the MacAddress of the AP to which the client is associated. cldcClientQuarantineVLAN represents the quarantine VLAN for the client. cldcClientAccessVLAN represents the access VLAN for the client. | ||
| NTF ciscoLwappDot11ClientAssocTrap | 1.3.6.1.4.1.9.9.599.0.9 | The notification shall be sent when the Station associats to controller. | ||
| ciscoLwappDot11ClientCcxMIBObjects | 1.3.6.1.4.1.9.9.599.3 | |||
| ciscoLwappDot11ClientCCXV5ReportingMIBConform | 1.3.6.1.4.1.9.9.599.2.4 | |||
| NTF ciscoLwappDot11ClientDeAuthenticatedTrap | 1.3.6.1.4.1.9.9.599.0.10 | The notification shall be sent when the Station gets de-authenticated. | ||
| NTF ciscoLwappDot11ClientDisassocDataStatsTrap | 1.3.6.1.4.1.9.9.599.0.6 | The disassociate notification shall be sent when the Station sends a Disassociation frame. The value of the notification shall include the MAC address of the MAC to which the Disassociation frame was sent and the reason for the disassociation | ||
| NTF ciscoLwappDot11ClientDisassocNacAlert | 1.3.6.1.4.1.9.9.599.0.3 | This notification is generated when the controller removes the client entry on NAC enabled SSIDs. cldcClientWlanProfileName represents the profile name of the WLAN, this 802.11 wireless client is connected to. cldcClientIPAddress represents the unique ipaddress of the client. cldcApMacAddress represents the MacAddress of the AP to which the client is associated. cldcClientQuarantineVLAN represents the quarantine VLAN for the client. cldcClientAccessVLAN represents the access VLAN for the client. This is issued on NAC enabled ssids, whenever WLC removes client's entry. | ||
| NTF ciscoLwappDot11ClientKeyDecryptError | 1.3.6.1.4.1.9.9.599.0.1 | This notification is generated when a decrypt error occurs. The WEP WPA or WPA2 Key configured at the station may be wrong. cldcAssociationMode represents the association mode for which the key decrypt error occurred. cldcApMacAddress represents the MacAddress of the AP to which the client is associated. cldcIfType represents the wireless interface type of the client. cLApName represents the name of the AP to which the client is associated. | ||
| ciscoLwappDot11ClientMIB | 1.3.6.1.4.1.9.9.599 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-weight LWAPP Access Points. Information provided by this MIB is about the configuration and monitoring of 802.11 wireless clients in the network. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends them to the controller to which it is logically connected. Basic Service Set ( BSS ) Coverage area of one access point is called a BSS. An access point (AP) acts as a master to control the clients within that BSS. Clear To Send (CTS) Refer to the description of RTS. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. MAC Service Data Units ( MSDU ) The MSDU is that unit of data received from the logical link control ( LLC ) sub-layer which lies above the medium access control ( MAC ) sub-layer in a protocol stack. Message Integrity Code ( MIC ) A value generated by a symmetric key cryptographic function. If the input data are changed, a new value cannot be correctly computed without knowledge of the symmetric key. Thus, the secret key protects the input data from undetectable alteration. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Node, Mobile Station(Ms) and client are used interchangeably. Request To Send ( RTS ) A client wishing to send data initiates the process by sending a Request To Send (RTS) frame. The destination client replies with a Clear To Send (CTS) frame. Wireless local-area network ( WLAN ) A local-area network that uses high-frequency radio waves rather than wires to communicate between nodes. Service Set Identifier (SSID) A service set identifier is a name that identifies a particular 802.11 wireless LAN. A client device receives broadcast messages from all access points within range advertising their SSIDs. The client device can then either manually or automatically based on configuration select the network with which to associate. The SSID can be up to 32 characters long. Hybrid Remote Edge Access Point (HREAP) HREAP is a wireless solution for branch office and remote office deployments. It enables customers to configure and control access points in a branch or remote office from the corporate office through a wide area network (WAN) link without deploying a controller in each office. HREAP is also known as flexconnect. Workgroup Bridge ( WGB ) A WGB can provide a wireless infrastructure connection for a Ethernet-enabled devices. Devices that do not have a wireless client adapter in order to connect to the wireless network can be connected to a WGB through Ethernet port. KTS (Key Telephone System) Key Telephone System is an alternative to a private branch exchange (PBX) phone system. A KTS is equipped with several buttons that allow a caller to directly select outgoing lines or incoming calls, and use intercom and conference facilities. REFERENCE [1] Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol | ||
| ciscoLwappDot11ClientMIBCcxGroup | 1.3.6.1.4.1.9.9.599.2.2.8 | This collection of objects provides the 802.11 wireless CCX clients information. | ||
| ciscoLwappDot11ClientMIBCompliance | 1.3.6.1.4.1.9.9.599.2.1.1 | The compliance statement for the SNMP entities that implement this MIB. | ||
| ciscoLwappDot11ClientMIBComplianceRev2 | 1.3.6.1.4.1.9.9.599.2.1.2 | The compliance statement for the SNMP entities that implement this MIB. | ||
| ciscoLwappDot11ClientMIBComplianceRev3 | 1.3.6.1.4.1.9.9.599.2.1.3 | The compliance statement for the SNMP entities that implement this MIB. | ||
| ciscoLwappDot11ClientMIBComplianceRev4 | 1.3.6.1.4.1.9.9.599.2.1.4 | The compliance statement for the SNMP entities that implement this MIB. | ||
| ciscoLwappDot11ClientMIBCompliances | 1.3.6.1.4.1.9.9.599.2.1 | |||
| ciscoLwappDot11ClientMIBConfigGroup | 1.3.6.1.4.1.9.9.599.2.2.1 | This collection of objects specifies the required configuration parameters for the 802.11 wireless clients. | ||
| ciscoLwappDot11ClientMIBConform | 1.3.6.1.4.1.9.9.599.2 | |||
| ciscoLwappDot11ClientMIBGroups | 1.3.6.1.4.1.9.9.599.2.2 | |||
| ciscoLwappDot11ClientMIBNotifControlGroup | 1.3.6.1.4.1.9.9.599.2.2.6 | This collection of objects represents the objects that control the notifications for the 802.11 wireless clients. | ||
| ciscoLwappDot11ClientMIBNotifs | 1.3.6.1.4.1.9.9.599.0 | |||
| ciscoLwappDot11ClientMIBNotifsGroup | 1.3.6.1.4.1.9.9.599.2.2.2 | This collection of objects specifies the notifications for the 802.11 wireless clients. | ||
| ciscoLwappDot11ClientMIBNotifsGroupRev2 | 1.3.6.1.4.1.9.9.599.2.2.5 | This collection of objects represents the notifications for the 802.11 wireless clients. | ||
| ciscoLwappDot11ClientMIBObjects | 1.3.6.1.4.1.9.9.599.1 | |||
| ciscoLwappDot11ClientMIBStatusGroup | 1.3.6.1.4.1.9.9.599.2.2.3 | This collection of objects specifies the required status parameters for the 802.11 wireless clients. | ||
| ciscoLwappDot11ClientMIBStatusGroupRev2 | 1.3.6.1.4.1.9.9.599.2.2.4 | This collection of objects specifies the required status parameters for the 802.11 wireless clients. | ||
| ciscoLwappDot11ClientMIBStatusGroupRev2Sup | 1.3.6.1.4.1.9.9.599.2.2.7 | This collection of objects specifies the required status parameters for the 802.11 wireless clients and it supplements ciscoLwappDot11ClientMIBStatusGroupRev2. | ||
| ciscoLwappDot11ClientMIBSup1Group | 1.3.6.1.4.1.9.9.599.2.2.9 | This collection of objects provides the 802.11 wireless clients notifications information. | ||
| NTF ciscoLwappDot11ClientMobilityTrap | 1.3.6.1.4.1.9.9.599.0.12 | The notification shall be sent when the Station gets roamed. | ||
| NTF ciscoLwappDot11ClientMovedToRunState | 1.3.6.1.4.1.9.9.599.0.4 | This notification is generated when the client completes the PEM state and moves to the RUN state. cldcClientUsername represents the username used by the client. cldcClientIPAddress represents the unique ipaddress of the client. cldcClientSSID represents the SSID of the WLAN to which the client is associated. cldcApMacAddress represents the MacAddress of the AP to which the client is associated. cLApDot11IfSlotId represents the slotId of the AP to which the client is associated. cLApName represents the name of the AP to which the client is associated. | ||
| NTF ciscoLwappDot11ClientMovedToRunStateNewTrap | 1.3.6.1.4.1.9.9.599.0.11 | The notification shall be sent when the Station moves to run or authenticated state. | ||
| NTF ciscoLwappDot11ClientSessionTrap | 1.3.6.1.4.1.9.9.599.0.8 | Issued when the client completes the PEM state and moves to the RUN state. | ||
| NTF ciscoLwappDot11ClientStaticIpFailTrap | 1.3.6.1.4.1.9.9.599.0.5 | This is issued whenever the subnet defined for the static IP of a client is not found. | ||
| T/F ciscoLwappDot11ClientStaticIpFailTrapEnabled | 1.3.6.1.4.1.9.9.599.1.1.5 | TruthValue | read-write | The object specifies the control of generation of ciscoLwappDot11ClientStaticIpFailTrap notification. A value of 'true' specifies that the agent generates ciscoLwappDot11ClientStaticIpFailTrap notification. A value of 'false' specifies that the agent doesn't generate ciscoLwappDot11ClientStaticIpFailTrap notification. |
| MAC cldcApMacAddress | 1.3.6.1.4.1.9.9.599.1.3.1.1.8 | MacAddress | read-only | This object represents the radio MAC address of a LWAPP AP. |
| INT cldcAssociationMode | 1.3.6.1.4.1.9.9.599.1.3.1.1.7 | INTEGER | read-only | This object represents the association mode used by client for protected wireless traffic. A value of 'unknown' represents that association mode used by client for wilress traffic encryption is not known. A value of 'wep' represents that association mode used by client for wilress traffic encryption is WEP. A value of 'wpa' represents that association mode used by client for wilress traffic encryption is WPA. A value of 'wpa2' represents that association mode used by client for wilress traffic encryption is WPA2. |
| T/F cldcAssocNacAlertEnabled | 1.3.6.1.4.1.9.9.599.1.1.2 | TruthValue | read-write | This object specifies the status of generation of ciscoLwappDot11ClientAssocNacAlert notification. A value of 'true' specifies that the agent generates ciscoLwappDot11ClientAssocNacAlert notification. A value of 'false' specifies that the agent doesn't generate ciscoLwappDot11ClientAssocNacAlert notification. |
| CCX cldccCcxFoundationServiceVersion | 1.3.6.1.4.1.9.9.599.3.1.1.1.1 | CcxServiceVersion | read-only | This object indicates the CCX version supported by the client for the foundation service. |
| CCX cldccCcxLocationServiceVersion | 1.3.6.1.4.1.9.9.599.3.1.1.1.2 | CcxServiceVersion | read-only | This object indicates the CCX version supported by the client for the location service. |
| CCX cldccCcxManagementServiceVersion | 1.3.6.1.4.1.9.9.599.3.1.1.1.4 | CcxServiceVersion | read-only | This object indicates the CCX version supported by the client for the management service. |
| cldccCcxVersionInfoEntry | 1.3.6.1.4.1.9.9.599.3.1.1.1 | not-accessible | There is an entry in the table for each entry identified by the client mac address. An entry is added when a CCX v6 client associates to the controller and existing entry gets deleted when the client disassociates from the controller. | |
| cldccCcxVersionInfoTable | 1.3.6.1.4.1.9.9.599.3.1.1 | not-accessible | This table represents the detail of the CCX version supported by the clients. This is used to identify the services supported by a CCX v6 client. | |
| CCX cldccCcxVoiceServiceVersion | 1.3.6.1.4.1.9.9.599.3.1.1.1.3 | CcxServiceVersion | read-only | This object indicates the CCX version supported by the client for the voice service. |
| cldcCcxObjects | 1.3.6.1.4.1.9.9.599.3.1 | |||
| T/F cldcClient80211uCapable | 1.3.6.1.4.1.9.9.599.1.3.1.1.20 | TruthValue | read-only | This object indicates whether the client supports 802.11u feature. The 802.11u standard allows devices such as laptop computers or cellular phones to join a wireless LAN widely used in the home, office and some commercial establishments. A value of 'true' indicates that the client supports the 802.11u feature. A value of 'false' indicates that the client does not support the 802.11u feature. |
| INT cldcClientAaaOverrideAclApplied | 1.3.6.1.4.1.9.9.599.1.3.1.1.26 | INTEGER | read-only | This object indicates the AAA Override ACL applied status for the client if cldcClientPostureState is enabled on the wlan. A value of 'true' indicates that the ACL is applied. A value of 'false' indicates that the ACL is not applied. A value of 'notAvailable' indicates that applied status is not available |
| STR cldcClientAaaOverrideAclName | 1.3.6.1.4.1.9.9.599.1.3.1.1.25 | SnmpAdminString | read-only | This object indicates the AAA Override ACL Name for the client if cldcClientPostureState is enabled on the wlan. |
| STR cldcClientAAARole | 1.3.6.1.4.1.9.9.599.1.3.1.1.43 | SnmpAdminString | read-only | This object indicates the role string of the client that is used as match criterion for local policy profiling. This value is provided by radius during authentication. |
| VLA cldcClientAccessVLAN | 1.3.6.1.4.1.9.9.599.1.3.1.1.13 | VlanId | read-only | This object indicates the access VLAN for client. The access VLAN allows unlimited access to the network. |
| INT cldcClientAclApplied | 1.3.6.1.4.1.9.9.599.1.3.1.1.23 | INTEGER | read-only | This object indicates the ACL applied status for the client. A value of 'true' indicates that the ACL is applied. A value of 'false' indicates that the ACL is not applied. A value of 'notAvailable' indicates that applied status is not available |
| STR cldcClientAclName | 1.3.6.1.4.1.9.9.599.1.3.1.1.22 | SnmpAdminString | read-only | This object indicates the ACL Name for the client. This ACL will be used to allow or block client traffic based on the list of rules attached to the ACL. |
| U32 cldcClientAID | 1.3.6.1.4.1.9.9.599.1.2.11 | Unsigned32 | accessible-for-notify | This object represents the AID allocated for the mobile station |
| IP cldcClientAnchorAddress | 1.3.6.1.4.1.9.9.599.1.2.17 | InetAddress | accessible-for-notify | This object represent anchor IP address. If the mobility status of the mobile station is anchor then it will have peer Ip address and will have anchor IP if the role is foreign |
| IPt cldcClientAnchorAddressType | 1.3.6.1.4.1.9.9.599.1.2.16 | InetAddressType | accessible-for-notify | This object represents mobility anchor address type. |
| MAC cldcClientApRoamMacAddress | 1.3.6.1.4.1.9.9.599.1.3.1.1.39 | MacAddress | read-only | This object indicates the MAC address of the AP to which the client has roamed. |
| TIM cldcClientAssocTime | 1.3.6.1.4.1.9.9.599.1.2.28 | TimeStamp | accessible-for-notify | This object represents the time at which client associated |
| INT cldcClientAuthentication | 1.3.6.1.4.1.9.9.599.1.3.1.1.34 | INTEGER | read-only | This object indicates whether client is authentiated locally or centrally. This object is valid for flexconnect APs. A value of 'unknown' indicates that client authentication is not known. A value of 'central' indicates that client authenticatation is at WLC and AP tunnels client management traffic to WLC via CAPWAP. A value of 'local' indicates that client is authenticated locally by AP. |
| INT cldcClientAuthenticationAlgorithm | 1.3.6.1.4.1.9.9.599.1.2.12 | INTEGER | accessible-for-notify | This object represents the authentication algorithm of mobile station used for authentication. A value of 'openSystem' represents that the client used open system algorithm to get authenticated. A value of 'sharedKey' represents that the client used shared key algorithm to get authenticated. A value of 'unknown' represents that the algorithm used for authentication is not known. A value of 'openAndEap' represents that the client used open system and EAP algorithm to get authenticated. |
| INT cldcClientAuthMode | 1.3.6.1.4.1.9.9.599.1.3.1.1.36 | INTEGER | read-only | This object represents the authentication mode of client. A value of 'none' represents that client used open authentication to join to network. A value of 'psk' represents that client used PSK based authentication to join to network. A value of 'radius' represents that client gets authenticated with the help of radius. A value of 'cckm' represents that client used CCKM based authentication to join to network. A value of 'wapipsk' represents that client used WAPI PSK authentication to join to network. A value of 'wapicert' represents that client used WPA/WPA2 DOT1X authentication to join to network. A value of 'ftDot1x' represents that client used 802.11r DOT1X authentication to join to network. A value of 'ftpsk' represents that client used 802.11r PSK authentication to join to network. A value of 'pmfDot1x' represents that client used PMF DOT1X authentication to join to network. A value of 'pmfpsk' represents that client used PMF PSK authentication to join to network. |
| IP cldcClientByIpAddress | 1.3.6.1.4.1.9.9.599.1.3.2.1.3 | InetAddress | not-accessible | This object indicates the client IP address. |
| INT cldcClientByIpAddressDiscoverType | 1.3.6.1.4.1.9.9.599.1.3.2.1.4 | INTEGER | read-only | This object represents the discovery type of the client's address A value of 'invalid' indicates that the IP address discover type is unknown. A value of 'ndp' indicates that the client learnt IP address by neighbor discovery protocol A value of 'dhcp' indicates that the client learnt IP address via DHCP. A value of 'packet' indicates that the client learnt IP address via data packet addressing learning. A value of 'local' indicates that the client learnt IP address via address applied to local interface. A value of 'static' indicates that the client learnt IP address via address assigned statically. |
| TIM cldcClientByIpAddressLastSeen | 1.3.6.1.4.1.9.9.599.1.3.2.1.5 | TimeStamp | read-only | This object indicates the time when an address was last seen in reachable state. |
| IPt cldcClientByIpAddressType | 1.3.6.1.4.1.9.9.599.1.3.2.1.2 | InetAddressType | not-accessible | This object represents the type of the Client's address made available through cldcClientByIpAddress. |
| cldcClientByIpEntry | 1.3.6.1.4.1.9.9.599.1.3.2.1 | not-accessible | Each entry represents a conceptual row in this table and provides the information about the clients associated to the APs that have joined the controller. An entry is identified by the client's IP address. | |
| cldcClientByIpTable | 1.3.6.1.4.1.9.9.599.1.3.2 | not-accessible | This table represents the 802.11 wireless clients that are associated with the APs that have joined this controller and are indexed by cldcClientByIpAddressType and cldcClientByIpAddress. An entry is created automatically by the controller when the client gets associated to the AP. An existing entry gets deleted when the association gets dropped. | |
| INT cldcClientCcxVersion | 1.3.6.1.4.1.9.9.599.1.2.19 | INTEGER | accessible-for-notify | This object represents the Cisco Compatible Extensions (CCX) version the client is using for communication with the AP. A value of 'notSupported' represents CCX version is not supported. A value of 'ccxv1' represents that client used CCX version 1 for communication. A value of 'ccxv2' represents that client used CCX version 2 for communication. A value of 'ccxv3' represents that client used CCX version 3 for communication. A value of 'ccxv4' represents that client used CCX version 4 for communication. A value of 'ccxv5' represents that client used CCX version 5 for communication. A value of 'ccxv6' represents that client used CCX version 6 for communication. |
| U32 cldcClientChannel | 1.3.6.1.4.1.9.9.599.1.3.1.1.35 | Unsigned32 | read-only | This object indicates the access point's channel to which the client is associated. |
| U32 cldcClientCurrentTxRate | 1.3.6.1.4.1.9.9.599.1.3.1.1.50 | Unsigned32 | read-only | This object represents the current data rate at which the client transmits and receives data. This provides the data rate value equivalent to the MCS value displayed in cldcClientCurrentTxRateSet. |
| OCT cldcClientCurrentTxRateSet | 1.3.6.1.4.1.9.9.599.1.3.1.1.17 | OCTET STRING | read-only | This object indicates the current data rate at which the client transmits and receives data. The data rate field is a 16-bit unsigned value expressing the data rate of the packets received by the client. |
| C64 cldcClientDataBytesReceived | 1.3.6.1.4.1.9.9.599.1.4.1.1.9 | Counter64 | read-only | This object indicates the number of data bytes received for this client |
| C64 cldcClientDataBytesSent | 1.3.6.1.4.1.9.9.599.1.4.1.1.13 | Counter64 | read-only | This object indicates the number of data bytes sent for this mobile station |
| C64 cldcClientDataPacketsReceived | 1.3.6.1.4.1.9.9.599.1.4.1.1.17 | Counter64 | read-only | This object indicates the number of data packets received for this mobile station |
| C64 cldcClientDataPacketsSent | 1.3.6.1.4.1.9.9.599.1.4.1.1.21 | Counter64 | read-only | This object indicates the number of data packets sent for this mobile station |
| OCT cldcClientDataRateSet | 1.3.6.1.4.1.9.9.599.1.3.1.1.18 | OCTET STRING | read-only | This object indicates the set of data rates at which the client may transmit data. Each client can support up to 126 rates. Each octet contains an integer value representing one of these 126 rates ranging from 1 Mb/s to 63.5 Mb/s. One of the supported rates will be chosen by the access point for transmission with the client. |
| C64 cldcClientDataRetries | 1.3.6.1.4.1.9.9.599.1.4.1.1.1 | Counter64 | read-only | This object indicates the number of attempts made by the client before transmitting the MSDU successfully. |
| INT cldcClientDataSwitching | 1.3.6.1.4.1.9.9.599.1.3.1.1.33 | INTEGER | read-only | This object indicates whether client is switching data locally or centrally. This object is valid for flexconnect APs. A value of 'unknown' indicates that client data switching is not known. A value of 'central' indicates that client data is tunneled to WLC using CAPWAP. A value of 'local' indicates that client data is bridged locally by AP. |
| C64 cldcClientDecryptFailures | 1.3.6.1.4.1.9.9.599.1.4.1.1.4 | Counter64 | read-only | This object indicates the number of packets received from the client that failed to decrypt properly. |
| INT cldcClientDeleteAction | 1.3.6.1.4.1.9.9.599.1.2.24 | INTEGER | accessible-for-notify | This object represents the action to deauthenticate the mobile station. A value of 'default' represents the state as default. A value of 'delete' represents the state as delete. |
| STR cldcClientDeviceType | 1.3.6.1.4.1.9.9.599.1.3.1.1.44 | SnmpAdminString | read-only | This object indicates the device type of the client. This is identified once the profiling operation is completed. |
| C64 cldcClientDuplicatePackets | 1.3.6.1.4.1.9.9.599.1.4.1.1.3 | Counter64 | read-only | This object indicates the number of times a duplicate packet is received for the client. |
| INT cldcClientE2eVersion | 1.3.6.1.4.1.9.9.599.1.2.20 | INTEGER | accessible-for-notify | This object represents the End-2-End Version the client is using for communication with the AP. A value of 'notSupported' represents end-2-end version is not supported. A value of 'e2ev1' represents end-2-end version used by mobile station is 1. A value of 'e2ev2' represents end-2-end version used by mobile station is 2. |
| INT cldcClientEapType | 1.3.6.1.4.1.9.9.599.1.2.10 | INTEGER | accessible-for-notify | This object represents EAP policy type used by the mobile station during association. A value of 'eapTls' represents the EAP policy type as EAP-TLS. A value of 'ttls' represents the EAP policy type as TTLS. A value of 'peap' represents the EAP policy type as PEAP. A value of 'leap' represents the EAP policy type as LEAP. A value of 'speke' represents the EAP policy type as EAP-SPEKE. A value of 'eapFast' represents the EAP policy type as EAP-FAST. A value of 'notavailable' represents the EAP policy type is not available A value of 'unknown' represents the EAP policy type is not known. |
| INT cldcClientEncryptionCipher | 1.3.6.1.4.1.9.9.599.1.2.14 | INTEGER | accessible-for-notify | This object represents encryption cipher selected for encryption of mobile station traffic. A value of 'ccmpAes' represents the encryption used is CCMP AES. A value of 'tkipMic' represents the encryption used is TKIP-MIC. A value of 'wep40' represents the encryption used is WEP40. A value of 'wep104' represents the encryption used is WEP104. A value of 'wep128' represents the encryption used is WEP128. A value of 'none' represents the no encryption used. A value of 'notavailable' represents the encryption used is not available. A value of 'unknown' represents the encryption is used is not known. A value of 'wapiSMS4' represents the encryption is used is WAPI-SMS4. |
| cldcClientEntry | 1.3.6.1.4.1.9.9.599.1.3.1.1 | not-accessible | Each entry represents a conceptual row in this table and provides the information about the clients associated to the APs that have joined the controller. An entry is identified the client's MAC address. | |
| U32 cldcClientEssIndex | 1.3.6.1.4.1.9.9.599.1.2.18 | Unsigned32 | accessible-for-notify | This object represents the ESS index of the WLAN(SSID) that is being used by mobile station to connect to AP |
| INT cldcClientHreapApAuth | 1.3.6.1.4.1.9.9.599.1.3.1.1.19 | INTEGER | read-only | This object indicates whether the client is locally authenticated or authenticated by the controller. Local authentication is done only if the Access Point connected to the client is of flexconnect mode. A value of 'true' indicates that the client is authenticated by the AP.. A value of 'false' indicates that the client is authenticated by the controller. A value of 'notApplicable' indicates that client is not connected to a flexconect AP. |
| T/F cldcClientHtCapable | 1.3.6.1.4.1.9.9.599.1.3.1.1.48 | TruthValue | read-only | This object indicates whether the client is HT (high throughput) capable or not. A value of 'true' indicates that client is HT capable. A value of 'false' indicates that client is not HT capable. |
| STR cldcClientInterface | 1.3.6.1.4.1.9.9.599.1.2.21 | SnmpAdminString | accessible-for-notify | This object represents the name of the interface of the mobile client on which traffic sent to the switch. |
| C64 cldcClientInterimUpdatesCount | 1.3.6.1.4.1.9.9.599.1.4.1.1.8 | Counter64 | read-only | This object indicates the number of interim updates sent for this client. |
| IP cldcClientIPAddress | 1.3.6.1.4.1.9.9.599.1.3.1.1.10 | IpAddress | read-only | This object represents client's IP address. This is learnt from the client details when the client associates with the access point. |
| OCT cldcClientiPSKTag | 1.3.6.1.4.1.9.9.599.1.3.1.1.51 | OCTET STRING | read-only | This object indicates the iPSK peer group that this client is part of. The clients with same ipsk tag can be allowed to have peer to peer traffic by configuring the wlan p2p blocking. |
| INT cldcClientIpv6AclApplied | 1.3.6.1.4.1.9.9.599.1.3.1.1.32 | INTEGER | read-only | This object indicates the ACL applied status for the IPv6 client. A value of 'true' indicates that the ACL is applied. A value of 'false' indicates that the ACL is not applied. A value of 'notAvailable' indicates that applied status is not avaliable |
| STR cldcClientIpv6AclName | 1.3.6.1.4.1.9.9.599.1.3.1.1.31 | SnmpAdminString | read-only | This object indicates the ACL name for the IPv6 client. An empty string denotes no ACL has been applied. |
| TIM cldcClientLoginTime | 1.3.6.1.4.1.9.9.599.1.3.1.1.14 | TimeStamp | read-only | This object indicates the value of sysUpTime when the client logged in. |
| MAC cldcClientMacAddress | 1.3.6.1.4.1.9.9.599.1.3.1.1.1 | MacAddress | not-accessible | This object represents the MAC address of the client for this entry and uniquely identifies this entry. |
| U32 cldcClientMaxDataRate | 1.3.6.1.4.1.9.9.599.1.3.1.1.47 | Unsigned32 | read-only | This object indicates the max data rate (Mbps) with which the client can operate. |
| U32 cldcClientMdnsAdvCount | 1.3.6.1.4.1.9.9.599.1.3.1.1.41 | Unsigned32 | read-only | This object indicates the number of mDNS advertisements received on the client. |
| STR cldcClientMdnsProfile | 1.3.6.1.4.1.9.9.599.1.3.1.1.40 | SnmpAdminString | read-only | This object indicates the mDNS profile name mapped to 802.11 wireless client. It could be mapped to the WLAN to which the client is connected to, or the interface/interface groups mapped to the WLAN. |
| C64 cldcClientMicErrors | 1.3.6.1.4.1.9.9.599.1.4.1.1.5 | Counter64 | read-only | This object indicates the number of MIC errors experienced by the client. |
| C64 cldcClientMicMissingFrames | 1.3.6.1.4.1.9.9.599.1.4.1.1.6 | Counter64 | read-only | This object indicates the number of missing MIC packets for the client. |
| INT cldcClientMobileStPolicyType | 1.3.6.1.4.1.9.9.599.1.3.1.1.52 | INTEGER | read-only | Security policy of the AP to which the Mobile Station is associated. |
| T/F cldcClientMobilityExtDataValid | 1.3.6.1.4.1.9.9.599.1.2.30 | TruthValue | accessible-for-notify | This object represents new mobility status. |
| INT cldcClientMobilityStatus | 1.3.6.1.4.1.9.9.599.1.2.22 | INTEGER | accessible-for-notify | This object represents the mobility role of the mobile station. A value of 'unassociated' represents mobility role is not associated. A value of 'local' represents mobility role is local. A value of 'anchor' represents mobility role is anchor. A value of 'foreign' represents mobility role is foreign. A value of 'handoff' represents mobility role is handoff. A value of 'unknown' represents mobility role is not known. A value of 'exportanchor' represents mobility role is exportanchor. A value of 'exportforeign' represents mobility role is exportforeign. |
| INT cldcClientNacState | 1.3.6.1.4.1.9.9.599.1.3.1.1.11 | INTEGER | read-write | This object specifies that client's network admission control state. A value of 'quarantine' specifies that client goes through posture analysis and the client traffic is sent by controller in quarantine vlan. A value of 'access' specifies that client traffic is sent by controller in access vlan. The client should have completed posture analysis. Posture Analysis is a state change where the client applies the configured policies to validate access to the network. |
| INT cldcClientPmipAtt | 1.3.6.1.4.1.9.9.599.1.2.38 | INTEGER | accessible-for-notify | This object indicates the access technology type by which the client is currently attached. A value of 'reserved' indicates this value is reserved for future use. A value of 'logicalNetworkInterface' indicates that the client used logical network interface to connect to network. A value of 'pointToPointInterface' indicates that the client used point to point interface to connect to network. A value of 'ethernet' indicates that the client used ethernet to connect to network. A value of 'wirelessLan' indicates that the client used wireless LAN to connect to network. A value of 'wimax' indicates that the client used WiMAX technology to connect to network. A value of 'threeGPPGERAN' indicates that the client used threeGPPGERAN technology to connect to network. A value of 'threeGPPUTRAN' indicates that the client used threeGPPUTRAN technology to connect to network. A value of 'threeGPPETRAN' indicates that the client used threeGPPETRAN technology to connect to network. A value of 'threeGPP2eHRPD' indicates that the client used threeGPP2eHRPD technology to connect to network. A value of 'threeGPP2HRPD' indicates that the client used threeGPP2HRPD technology to connect to network. A value of 'threeGPP21xRTT' indicates that the client used threeGPP21xRTT technology to connect to network. A value of 'threeGPP2UMB' indicates that the client used threeGPP2UMB technology to connect to network. |
| T/F cldcClientPmipDataValid | 1.3.6.1.4.1.9.9.599.1.2.29 | TruthValue | accessible-for-notify | This object represents whether client has valid PMIP data. |
| STR cldcClientPmipDomainName | 1.3.6.1.4.1.9.9.599.1.2.42 | SnmpAdminString | accessible-for-notify | This object indicates the domain to which the PMIP client is associated. |
| U32 cldcClientPmipDownKey | 1.3.6.1.4.1.9.9.599.1.2.44 | Unsigned32 | accessible-for-notify | This object indicates the downstream key of the PMIP client. |
| IP cldcClientPmipHomeAddr | 1.3.6.1.4.1.9.9.599.1.2.37 | InetAddress | accessible-for-notify | This object indicates the Home Address of the client. |
| IPt cldcClientPmipHomeAddrType | 1.3.6.1.4.1.9.9.599.1.2.36 | InetAddressType | accessible-for-notify | This object indicates the type of the Client's Home address made available through cldcClientPmipHomeAddress. |
| STR cldcClientPmipInterface | 1.3.6.1.4.1.9.9.599.1.2.35 | SnmpAdminString | accessible-for-notify | This object indicates the interface to which the client is associated. |
| TIK cldcClientPmipLifeTime | 1.3.6.1.4.1.9.9.599.1.2.41 | TimeTicks | accessible-for-notify | This object indicates the duration of the PMIP client association. |
| STR cldcClientPmipLmaName | 1.3.6.1.4.1.9.9.599.1.2.40 | SnmpAdminString | accessible-for-notify | This object indicates the LMA to which the client is connected. |
| MAC cldcClientPmipLocalLinkId | 1.3.6.1.4.1.9.9.599.1.2.39 | MacAddress | accessible-for-notify | This object indicates the local link identifier of the client. |
| STR cldcClientPmipNai | 1.3.6.1.4.1.9.9.599.1.2.33 | SnmpAdminString | accessible-for-notify | This object represents the name of the profile, the client is associated to. |
| STR cldcClientPmipState | 1.3.6.1.4.1.9.9.599.1.2.34 | SnmpAdminString | accessible-for-notify | This object indicates the state of the PMIP client: null: binding doesn't exist init: binding created, Retx timer running for PBU, binding not yet accepted from LMA, Tunnel/route is not yet setup active: binding accepted by LMA, refresh timer running, Tunnel/route setup complete. refreshPending: Refresh timer expired and Retx timer running. PBU refresh sent, PBA not yet received from LMA, (Tunnel/route is already setup). disconnectingSt: Dereg reply is expected. Retx timer is running, tunnel/route is still setup. |
| U32 cldcClientPmipUpKey | 1.3.6.1.4.1.9.9.599.1.2.43 | Unsigned32 | accessible-for-notify | This object indicates the upstream key of the PMIP client. |
| C64 cldcClientPolicyErrors | 1.3.6.1.4.1.9.9.599.1.2.31 | Counter64 | accessible-for-notify | This object represents the number of policy errors for mobile station |
| STR cldcClientPolicyManagerState | 1.3.6.1.4.1.9.9.599.1.2.27 | SnmpAdminString | accessible-for-notify | This object represents the current policy enforcement manager state of the client in controller. |
| STR cldcClientPolicyName | 1.3.6.1.4.1.9.9.599.1.3.1.1.42 | SnmpAdminString | read-only | This object indicates the local classification policy applied on the client. |
| INT cldcClientPolicyType | 1.3.6.1.4.1.9.9.599.1.2.9 | INTEGER | accessible-for-notify | This object represents security policy type on which the mobile station is associated. A value of 'dot1x' represents the policy type as dot1x. A value of 'wpa1' represents the policy type as WPA version 1. A value of 'wpa2' represents the policy type as WPA version 2. A value of 'wpa2vff' represents the policy type as WPA2VFF. A value of 'notavailable' represents the policy type is not available. A value of 'unknown' represents the policy type is not known. A value of 'wapi' represents the policy type as WAPI. |
| U32 cldcClientPortNumber | 1.3.6.1.4.1.9.9.599.1.2.15 | Unsigned32 | accessible-for-notify | This object represents the port number of this airespace switch on which the traffic of the mobile station is coming through. |
| T/F cldcClientPostureState | 1.3.6.1.4.1.9.9.599.1.3.1.1.21 | TruthValue | read-only | This object indicates the posture state of the client. Posture Analysis is a state change where the client applies the configured policies to validate access to the network. A value of 'true' indicates that the client supports the posture feature. A value of 'false' indicates that the client does not support the posture feature. |
| CLC cldcClientPowerSaveMode | 1.3.6.1.4.1.9.9.599.1.3.1.1.16 | CLClientPowerSaveMode | read-only | This object indicates the power management mode of the client. |
| INT cldcClientProtocol | 1.3.6.1.4.1.9.9.599.1.3.1.1.6 | INTEGER | read-only | This object represents 802.11 protocol type of the client it used to join to wireless network. A value of 'dot11a' represents that the client is using 802.11a standard to connect to the access point (AP) A value of 'dot11b' represents that the client is using 802.11b standard to connect to the access point (AP) A value of 'dot11g' represents that the client is using 802.11g standard to connect to the access point (AP) A value of 'unknown' represents that the client protocol is unknown A value of 'mobile' represents that the client using mobile wireless to connect to the access point (AP). A value of 'dot11n24' represents that the client is using 802.11n standard with 2.4 GHz frequency to connect to the access point (AP) A value of 'dot11n5' represents that the client is using 802.11n standard with 5 GHz frequency to connect to the access point (AP). A value of 'ethernet' represents that the client is using ethernet standard to connect to the access point (AP). A value of 'dot3' represents that the client is using dot3 standard to connect to the access point (AP). A value of 'dot11ac5' represents that the client is using 802.11ac standard with 5 GHz frequency to connect to the access point (AP). |
| VLA cldcClientQuarantineVLAN | 1.3.6.1.4.1.9.9.599.1.3.1.1.12 | VlanId | read-only | This object indicates the quarantine VLAN for client. The quarantine VLAN only allows limited access to the network. |
| C64 cldcClientRaPacketsDropped | 1.3.6.1.4.1.9.9.599.1.4.1.1.7 | Counter64 | read-only | This object indicates the number of RA (router advertisements) packets dropped for this client. It's applicable for IPv6 clients only. |
| C64 cldcClientRealtimeBytesReceived | 1.3.6.1.4.1.9.9.599.1.4.1.1.10 | Counter64 | read-only | This object indicates the number of realtime bytes received for this mobile station |
| C64 cldcClientRealtimeBytesSent | 1.3.6.1.4.1.9.9.599.1.4.1.1.14 | Counter64 | read-only | This object indicates the number of realtime bytes sent for this mobile station |
| C64 cldcClientRealtimePacketsReceived | 1.3.6.1.4.1.9.9.599.1.4.1.1.18 | Counter64 | read-only | This object indicates the number realtime packets received for this mobile station |
| C64 cldcClientRealtimePacketsSent | 1.3.6.1.4.1.9.9.599.1.4.1.1.22 | Counter64 | read-only | This object indicates the number of realtime packets sent for this mobile station |
| INT cldcClientReasonCode | 1.3.6.1.4.1.9.9.599.1.3.1.1.37 | INTEGER | read-only | This object represents the reason for disassociation of client. A value of 'unspecified' represents that client disassociated with reaon unspecified. A value of 'previousAuthNotValid' represents that client disassociated with reason previous authentication was not valid. A value of 'deauthenticationLeaving' represents that client disassociated with reason client leaving due to deauthentication. A value of 'disassociationDueToInactivity' represents that client disassociated with reason client disassociation due to inactivity. A value of 'disassociationAPBusy' represents that client disassociated with reason client disassociation since AP was busy. A value of 'class2FrameFromNonAuthStation' represents that client disassociated with reason class 2 frame from non authenticated station. A value of 'class2FrameFromNonAssStation' represents that client disassociated with reason class 2 frame from non associated station. A value of 'disassociationStaHasLeft' represents that client disassociated with reason station has left BSS due to disassociation. A value of 'staReqAssociationWithoutAuth' represents that client disassociated with reason station send association request without authentication. A value of 'invalidInformationElement' represents that client disassociated with reason stations send invalid information element in the management frame. A value of 'groupCipherInvalid' represents that client disassociated with reason invalid group cipher. A value of 'unicastCipherInvalid' represents that client disassociated with reason invalid unicast cipher. A value of 'akmpInvalid' represents that client disassociated with reason invalid key management protocol. A value of 'unsupportedRsnVersion' represents that client disassociated with reason unsupported RSN version. A value of 'invalidRsnIeCapabilities' represents that client disassociated with reason invalid RSN IE capabilities in the (re-)association request. A value of 'cipherSuiteRejected' represents that client disassociated with reason cipher suite rejected. A value of 'missingReasonCode' represents that client disassociated with reason reason code is missing. A value of 'maxAssociatedClientsReached' represents that client disassociated with reason maximum allowed associated client number has reached. A value of 'maxAssociatedClientsReachedOnRadio' represents that client disassociated with reason maximum allowed associated client number has reached on radio. A value of 'maxAssociatedClientsReachedOnWlan' represents that client disassociated with reason maximum allowed associated client number has reached on wlan. A value of 'unSpecifiedQosFailure' represents that client disassociated with reason unsupported QOS failure. A value of 'qosPolicyMismatch' represents that client disassociated with reason mismatch on QOS policy. A value of 'inSufficientBandwidth' represents that client disassociated with reason insufficient bandwidth to accommodate this station. A value of 'inValidQosParams' represents that client disassociated with reason invalid QOS parameters. |
| STR cldcClientRedirectUrl | 1.3.6.1.4.1.9.9.599.1.3.1.1.24 | CiscoURLStringOrEmpty | read-only | This object indicates the AAA override redirect URL for a client with cldcClientPostureState enabled. The object has a valid value when the WLAN, with which the client has associated requires conditional or splash-page or webauth web redirection. This object is otherwise not applicable, and contains a zero-length string. |
| I32 cldcClientRSSI | 1.3.6.1.4.1.9.9.599.1.2.1 | Integer32 | accessible-for-notify | This object represents the average RSSI for the mobile station. |
| C64 cldcClientRtsRetries | 1.3.6.1.4.1.9.9.599.1.4.1.1.2 | Counter64 | read-only | This object indicates the number of times the client has attempted to send RTS packets before receiving CTS packets. |
| C64 cldcClientRxDataBytes | 1.3.6.1.4.1.9.9.599.1.4.1.1.28 | Counter64 | read-only | This object indicates the number of data bytes sent for this mobile station |
| C64 cldcClientRxDataBytesDropped | 1.3.6.1.4.1.9.9.599.1.4.1.1.11 | Counter64 | read-only | This object indicates the number of received data bytes dropped for this mobile station |
| C64 cldcClientRxDataPackets | 1.3.6.1.4.1.9.9.599.1.4.1.1.27 | Counter64 | read-only | This object indicates the number of data packets sent for this mobile station |
| C64 cldcClientRxDataPacketsDropped | 1.3.6.1.4.1.9.9.599.1.4.1.1.19 | Counter64 | read-only | This object indicates the number of received data packets dropped for this mobile station |
| C64 cldcClientRxRealtimeBytesDropped | 1.3.6.1.4.1.9.9.599.1.4.1.1.12 | Counter64 | read-only | This object indicates the number of received realtime bytes dropped for this mobile station |
| C64 cldcClientRxRealtimePacketsDropped | 1.3.6.1.4.1.9.9.599.1.4.1.1.20 | Counter64 | read-only | This object indicates the number of received realtime packets dropped for this mobile station |
| INT cldcClientSecurityPolicyStatus | 1.3.6.1.4.1.9.9.599.1.2.25 | INTEGER | accessible-for-notify | This object represents the security policy state of the mobile station. A value of 'completed' represents the mobile station has completed the security policy checks. A value of 'notcompleted' represents policy checks are yet to be completed for the mobile station. |
| U32 cldcClientSecurityTagId | 1.3.6.1.4.1.9.9.599.1.3.1.1.29 | Unsigned32 | read-only | This object represents the security group tag of the client. |
| STR cldcClientSessionID | 1.3.6.1.4.1.9.9.599.1.2.32 | SnmpAdminString | accessible-for-notify | This object represents the session to which the client is associated. |
| I32 cldcClientSNR | 1.3.6.1.4.1.9.9.599.1.2.2 | Integer32 | accessible-for-notify | This object represents the average SNR for the mobile station. |
| STR cldcClientSSID | 1.3.6.1.4.1.9.9.599.1.3.1.1.28 | SnmpAdminString | read-only | This object represents the SSID of the WLAN to which the client is associated. |
| cldcClientStatisticEntry | 1.3.6.1.4.1.9.9.599.1.4.1.1 | not-accessible | An entry in this table represents traffic statistics of the associated client. | |
| cldcClientStatisticTable | 1.3.6.1.4.1.9.9.599.1.4.1 | not-accessible | This table represents statistics and status of the 802.11 wireless clients associated to the controller. | |
| CLD cldcClientStatus | 1.3.6.1.4.1.9.9.599.1.3.1.1.2 | CLDot11ClientStatus | read-only | This object represents the current status of the client. |
| INT cldcClientStatusCode | 1.3.6.1.4.1.9.9.599.1.2.23 | INTEGER | accessible-for-notify | This object represents status code of the mobile station |
| cldcClientTable | 1.3.6.1.4.1.9.9.599.1.3.1 | not-accessible | This table represents the 802.11 wireless clients that are associated with the APs that have joined this controller. An entry is created automatically by the controller when the client gets associated to the AP. An existing entry gets deleted when the association gets dropped. Each client added to this table is uniquely identified by the client's MAC address. | |
| TIK cldcClientTrapEventTime | 1.3.6.1.4.1.9.9.599.1.2.26 | TimeTicks | accessible-for-notify | This object represents the trap event time of the client. |
| INT cldcClientTunnelType | 1.3.6.1.4.1.9.9.599.1.3.1.1.46 | INTEGER | read-only | This object indicates the tunnel type used to send client traffic. A value of 'simple' indicates no tunnel is used to send client traffic towards DS. A value of 'pmipv6' indicates that PMIPv6 tunnel is used to send client traffic towards DS. A value of 'gtpv2' indicates that GTPv2 tunnel is used to send client traffic towards DS. A value of 'eogre' indicates that EOGRE tunnel is used to send client traffic towards DS. |
| C64 cldcClientTxDataBytes | 1.3.6.1.4.1.9.9.599.1.4.1.1.26 | Counter64 | read-only | This object indicates the number of data bytes sent by this mobile station |
| C64 cldcClientTxDataBytesDropped | 1.3.6.1.4.1.9.9.599.1.4.1.1.15 | Counter64 | read-only | This object indicates the number of transmitted data bytes dropped for this mobile station |
| C64 cldcClientTxDataPackets | 1.3.6.1.4.1.9.9.599.1.4.1.1.25 | Counter64 | read-only | This object indicates the number of data packets sent by this mobile station |
| C64 cldcClientTxDataPacketsDropped | 1.3.6.1.4.1.9.9.599.1.4.1.1.23 | Counter64 | read-only | This object indicates the number of transmitted data packets dropped for this mobile station |
| C64 cldcClientTxRealtimeBytesDropped | 1.3.6.1.4.1.9.9.599.1.4.1.1.16 | Counter64 | read-only | This object indicates the number of transmitted realtime bytes dropped for this mobile station |
| C64 cldcClientTxRealtimePacketsDropped | 1.3.6.1.4.1.9.9.599.1.4.1.1.24 | Counter64 | read-only | This object indicates the number of transmitted realtime packets dropped for this mobile station |
| T/F cldcClientTypeKTS | 1.3.6.1.4.1.9.9.599.1.3.1.1.30 | TruthValue | read-only | This object indicates whether the client is NEC KTS (National Electrical Code Key Telephone servie) client or not. A value of 'true' indicates that the client follows NEC KTS SIP protocol. A value of 'false' indicates that the client does not follow NEC KTS SIP protocol. |
| NUM cldcClientUpTime | 1.3.6.1.4.1.9.9.599.1.3.1.1.15 | TimeInterval | read-only | This object indicates the duration for which the client has been associated with this device. |
| STR cldcClientUsername | 1.3.6.1.4.1.9.9.599.1.3.1.1.27 | SnmpAdminString | read-only | This object represents the username used by the client. |
| T/F cldcClientVhtCapable | 1.3.6.1.4.1.9.9.599.1.3.1.1.49 | TruthValue | read-only | This object indicates whether the client is VHT (very high throughput) capable or not. A value of 'true' indicates that client is VHT capable. A value of 'false' indicates that client is not VHT capable. |
| I32 cldcClientVlanId | 1.3.6.1.4.1.9.9.599.1.2.8 | Integer32 | accessible-for-notify | This object represents VLAN ID of the interface to which the client is associated. |
| INT cldcClientWepState | 1.3.6.1.4.1.9.9.599.1.2.13 | INTEGER | accessible-for-notify | This object represents the WEP state of the mobile station. A value of 'enable' represents WEP state is enabled. A value of 'disable' represents WEP state is disbaled. |
| MAC cldcClientWgbMacAddress | 1.3.6.1.4.1.9.9.599.1.3.1.1.5 | MacAddress | read-only | This object represents the MAC address of the WGB this 802.11 wireless client to which it is connected. This returns a non-zero value when the cldcClientWgbStatus is wgbClient. |
| INT cldcClientWgbStatus | 1.3.6.1.4.1.9.9.599.1.3.1.1.4 | INTEGER | read-only | This object represents the work group bridging status of a DOT11 client. A value of 'regClient' represents that the client is a wireless client A value of 'wgbClient' represents that the client is connected via a WGB A value of 'wgb' represents that the client is the WGB itself. |
| STR cldcClientWlanProfileName | 1.3.6.1.4.1.9.9.599.1.3.1.1.3 | SnmpAdminString | read-only | This object represents the WLAN profile name this 802.11 wireless client is connected to. |
| cldcConfigObjects | 1.3.6.1.4.1.9.9.599.1.1 | |||
| T/F cldcDisassocNacAlertEnabled | 1.3.6.1.4.1.9.9.599.1.1.3 | TruthValue | read-write | This object specifies the control of generation of ciscoLwappDot11ClientDisassocNacAlert notification. A value of 'true' specifies that the agent generates ciscoLwappDot11ClientDisassocNacAlert notification. A value of 'false' specifies that the agent doesn't generate ciscoLwappDot11ClientDisassocNacAlert notification. |
| INT cldcDOT11ClientReasonCode | 1.3.6.1.4.1.9.9.599.1.2.3 | INTEGER | accessible-for-notify | This object represents the reason code for failure of client association. A value of 'unspecified' represents that the reason for failure is not specified. A value 'previousAuthNotValid' represents that the reason for failure is previous authentication was not valid. A value of 'deauthenticationLeaving' represents that the reason for failure is leaving due to deauthentication. A value of 'disassociationDueToInactivity' represents that the reason for failure is disassociation due to inactivity. A value of 'disassociationAPBusy' represents that the reason for failure is disassociation since AP was busy. A value of 'class2FrameFromNonAuthStation' represents that the reason for failure is class 2 frame from non authenticated station. A value of 'class2FrameFromNonAssStation' represents that the reason for failure is class 2 frame from non associated station. A value of 'disassociationStaHasLeft' represents that the reason for failure is station has left due to disassociation. A value of 'staReqAssociationWithoutAuth' represents that the reason for failure is station send association request without authentication. A value of 'invalidInformationElement' represents that the reason for failure is invalid information element. A value of 'groupCipherInvalid' represents that the reason for failure is invalid group Cipher. A value of 'unicastCipherInvalid' represents that the reason for failure is invalid unicast cipher. A value of 'akmpInvalid' represents that the reason for failure is invalid key management protocol. A value of 'unsupportedRsnVersion' represents that the reason for failure is unsupported RSN version. A value of invalidRsnIeCapabilities' represents that the reason for failure is invalid RSN IE capabilities. A value of 'cipherSuiteRejected' represents that the reason for failure is cipher suite not valid. A value of 'missingReasonCode' represents that the reason for failure is reason code is missing. A value of 'maxAssociatedClientsReached' represents that the reason for failure is maximum allowed associated client number has reached. A value of 'maxAssociatedClientsReachedOnRadio' represents that the reason for failure is maximum allowed associated client number has reached on radio. A value of 'maxAssociatedClientsReachedOnWlan' represents that the reason for failure is maximum allowed associated client number has reached on wlan. A value of 'unSpecifiedQosFailure' represents that the reason for failure is QoS not supported. A value of 'qosPolicyMismatch' represents that the reason for failure is mismatch on QOS policy. A value of 'inSufficientBandwidth' represents that the reason for failure is insufficient bandwidth. A value of 'inValidQosParams' represents that the reason for failure is invalid QOS parameters. |
| C32 cldcDOT11ClientRxDataBytes | 1.3.6.1.4.1.9.9.599.1.2.7 | Counter32 | accessible-for-notify | This object represents the number of data bytes sent for this mobile station |
| C32 cldcDOT11ClientRxDataPackets | 1.3.6.1.4.1.9.9.599.1.2.6 | Counter32 | accessible-for-notify | This object represents the number of data packets sent for this mobile station |
| C32 cldcDOT11ClientTxDataBytes | 1.3.6.1.4.1.9.9.599.1.2.5 | Counter32 | accessible-for-notify | This object represents the number of data bytes sent by this mobile station |
| C32 cldcDOT11ClientTxDataPackets | 1.3.6.1.4.1.9.9.599.1.2.4 | Counter32 | accessible-for-notify | This object represents the number of data packets sent by this mobile station |
| CLA cldcIfType | 1.3.6.1.4.1.9.9.599.1.3.1.1.9 | CLApIfType | read-only | This object represents the wireless interface type. |
| T/F cldcKeyDecryptErrorEnabled | 1.3.6.1.4.1.9.9.599.1.1.1 | TruthValue | read-write | This object specifies the status of generation of ciscoLwappDot11ClientKeyDecryptError notification. A value of 'true' specifies that the agent generates ciscoLwappDot11ClientKeyDecryptError notification. A value of 'false' specifies that the agent doesn't generate ciscoLwappDot11ClientKeyDecryptError notification. |
| T/F cldcMovedToRunStateEnabled | 1.3.6.1.4.1.9.9.599.1.1.4 | TruthValue | read-write | This object specifies the control of generation of ciscoLwappDot11ClientMovedToRunState notification. A value of 'true' specifies that the agent generates ciscoLwappDot11ClientMovedToRunState notification. A value of 'false' specifies that the agent doesn't generate ciscoLwappDot11ClientMovedToRunState notification. |
| cldcNotifObjects | 1.3.6.1.4.1.9.9.599.1.2 | |||
| cldcSleepingClientEntry | 1.3.6.1.4.1.9.9.599.1.3.3.1 | not-accessible | An entry containing the information about sleeping clients. | |
| MAC cldcSleepingClientMacAddress | 1.3.6.1.4.1.9.9.599.1.3.3.1.1 | MacAddress | not-accessible | This object represents the MAC address of the sleeping client and uniquely identifies the entry. |
| NUM cldcSleepingClientRemainingTime | 1.3.6.1.4.1.9.9.599.1.3.3.1.4 | TimeInterval | read-only | This object indicates the remaining session time for the sleeping client to be in associated state. |
| ROW cldcSleepingClientRowStatus | 1.3.6.1.4.1.9.9.599.1.3.3.1.5 | RowStatus | read-create | This object specifies the status column for this row and used to delete specific instances of row in the table. |
| OCT cldcSleepingClientSsid | 1.3.6.1.4.1.9.9.599.1.3.3.1.2 | OCTET STRING | read-only | This object represents the SSID of the WLAN to which the sleeping client is associated. |
| cldcSleepingClientTable | 1.3.6.1.4.1.9.9.599.1.3.3 | not-accessible | This table represents the information about sleeping clients | |
| STR cldcSleepingClientUserName | 1.3.6.1.4.1.9.9.599.1.3.3.1.3 | SnmpAdminString | read-only | This object represents the username used by the sleeping client. |
| cldcStatisticObjects | 1.3.6.1.4.1.9.9.599.1.4 | |||
| cldcStatusObjects | 1.3.6.1.4.1.9.9.599.1.3 | |||
| INT cldcUserAuthType | 1.3.6.1.4.1.9.9.599.1.3.1.1.45 | INTEGER | read-only | This object indicates the authentication aype of user. A value of 'open' indicates that the user authenticated using open security. A value of 'wepPsk' indicates that the user authenticated using WEP PSK security. A value of 'portal' indicates that the user authenticated using WEB layer3 portal security. A value of 'simPeap' indicates that the user authenticated using EAP SIM and PEAP security. A value of 'other' indicates that the user authenticated using security method not listed above. |
RFC description
Cisco vendor-specific MIB for managing lightweight AP (LWAPP) wireless clients; defines client association and status monitoring objects (vendor-private).
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.