All MIBs › CISCO-LWAPP-DOT11-CLIENT-MIB › cldcClientReasonCode
cldcClientReasonCode
Module: CISCO-LWAPP-DOT11-CLIENT-MIB
OID (symbolic): CISCO-LWAPP-DOT11-CLIENT-MIB::cldcClientReasonCode
OID (numeric): 1.3.6.1.4.1.9.9.599.1.3.1.1.37
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object represents the reason for disassociation of client. A value of 'unspecified' represents that client disassociated with reaon unspecified. A value of 'previousAuthNotValid' represents that client disassociated with reason previous authentication was not valid. A value of 'deauthenticationLeaving' represents that client disassociated with reason client leaving due to deauthentication. A value of 'disassociationDueToInactivity' represents that client disassociated with reason client disassociation due to inactivity. A value of 'disassociationAPBusy' represents that client disassociated with reason client disassociation since AP was busy. A value of 'class2FrameFromNonAuthStation' represents that client disassociated with reason class 2 frame from non authenticated station. A value of 'class2FrameFromNonAssStation' represents that client disassociated with reason class 2 frame from non associated station. A value of 'disassociationStaHasLeft' represents that client disassociated with reason station has left BSS due to disassociation. A value of 'staReqAssociationWithoutAuth' represents that client disassociated with reason station send association request without authentication. A value of 'invalidInformationElement' represents that client disassociated with reason stations send invalid information element in the management frame. A value of 'groupCipherInvalid' represents that client disassociated with reason invalid group cipher. A value of 'unicastCipherInvalid' represents that client disassociated with reason invalid unicast cipher. A value of 'akmpInvalid' represents that client disassociated with reason invalid key management protocol. A value of 'unsupportedRsnVersion' represents that client disassociated with reason unsupported RSN version. A value of 'invalidRsnIeCapabilities' represents that client disassociated with reason invalid RSN IE capabilities in the (re-)association request. A value of 'cipherSuiteRejected' represents that client disassociated with reason cipher suite rejected. A value of 'missingReasonCode' represents that client disassociated with reason reason code is missing. A value of 'maxAssociatedClientsReached' represents that client disassociated with reason maximum allowed associated client number has reached. A value of 'maxAssociatedClientsReachedOnRadio' represents that client disassociated with reason maximum allowed associated client number has reached on radio. A value of 'maxAssociatedClientsReachedOnWlan' represents that client disassociated with reason maximum allowed associated client number has reached on wlan. A value of 'unSpecifiedQosFailure' represents that client disassociated with reason unsupported QOS failure. A value of 'qosPolicyMismatch' represents that client disassociated with reason mismatch on QOS policy. A value of 'inSufficientBandwidth' represents that client disassociated with reason insufficient bandwidth to accommodate this station. A value of 'inValidQosParams' represents that client disassociated with reason invalid QOS parameters.
What is cldcClientReasonCode?
Reports the reason code explaining why a wireless client was disassociated, such as unspecified cause or invalid previous authentication.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.599.1.3.1.1.37 snmpwalk -v2c -c public <target> CISCO-LWAPP-DOT11-CLIENT-MIB::cldcClientReasonCode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.599.1.3.1.1.37.1 snmpget -v2c -c public <target> CISCO-LWAPP-DOT11-CLIENT-MIB::cldcClientReasonCode.1
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-DOT11-CLIENT-MIB::cldcClientReasonCode OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.599 | ciscoLwappDot11ClientMIB | CISCO-LWAPP-DOT11-CLIENT-MIB |
| 1.3.6.1.4.1.9.9.599.1 | ciscoLwappDot11ClientMIBObjects | CISCO-LWAPP-DOT11-CLIENT-MIB |
| 1.3.6.1.4.1.9.9.599.1.3 | cldcStatusObjects | CISCO-LWAPP-DOT11-CLIENT-MIB |
| 1.3.6.1.4.1.9.9.599.1.3.1 | cldcClientTable | CISCO-LWAPP-DOT11-CLIENT-MIB |
| 1.3.6.1.4.1.9.9.599.1.3.1.1 | cldcClientEntry | CISCO-LWAPP-DOT11-CLIENT-MIB |
| 1.3.6.1.4.1.9.9.599.1.3.1.1.37 | cldcClientReasonCode | CISCO-LWAPP-DOT11-CLIENT-MIB |