All MIBs › CISCO-LWAPP-DOT11-CLIENT-MIB › cldcClientAuthMode
cldcClientAuthMode
Module: CISCO-LWAPP-DOT11-CLIENT-MIB
OID (symbolic): CISCO-LWAPP-DOT11-CLIENT-MIB::cldcClientAuthMode
OID (numeric): 1.3.6.1.4.1.9.9.599.1.3.1.1.36
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object represents the authentication mode of client. A value of 'none' represents that client used open authentication to join to network. A value of 'psk' represents that client used PSK based authentication to join to network. A value of 'radius' represents that client gets authenticated with the help of radius. A value of 'cckm' represents that client used CCKM based authentication to join to network. A value of 'wapipsk' represents that client used WAPI PSK authentication to join to network. A value of 'wapicert' represents that client used WPA/WPA2 DOT1X authentication to join to network. A value of 'ftDot1x' represents that client used 802.11r DOT1X authentication to join to network. A value of 'ftpsk' represents that client used 802.11r PSK authentication to join to network. A value of 'pmfDot1x' represents that client used PMF DOT1X authentication to join to network. A value of 'pmfpsk' represents that client used PMF PSK authentication to join to network.
What is cldcClientAuthMode?
This read-only value shows which authentication method a connected wireless client used: none (open), PSK (pre-shared key), RADIUS (central server), or CCKM (fast roaming). It reflects the actual authentication type currently in use. An operator would observe this to audit which clients are using weak authentication (open/PSK) versus strong centralized auth (RADIUS).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.599.1.3.1.1.36 snmpwalk -v2c -c public <target> CISCO-LWAPP-DOT11-CLIENT-MIB::cldcClientAuthMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.599.1.3.1.1.36.1 snmpget -v2c -c public <target> CISCO-LWAPP-DOT11-CLIENT-MIB::cldcClientAuthMode.1
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-DOT11-CLIENT-MIB::cldcClientAuthMode OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.599 | ciscoLwappDot11ClientMIB | CISCO-LWAPP-DOT11-CLIENT-MIB |
| 1.3.6.1.4.1.9.9.599.1 | ciscoLwappDot11ClientMIBObjects | CISCO-LWAPP-DOT11-CLIENT-MIB |
| 1.3.6.1.4.1.9.9.599.1.3 | cldcStatusObjects | CISCO-LWAPP-DOT11-CLIENT-MIB |
| 1.3.6.1.4.1.9.9.599.1.3.1 | cldcClientTable | CISCO-LWAPP-DOT11-CLIENT-MIB |
| 1.3.6.1.4.1.9.9.599.1.3.1.1 | cldcClientEntry | CISCO-LWAPP-DOT11-CLIENT-MIB |
| 1.3.6.1.4.1.9.9.599.1.3.1.1.36 | cldcClientAuthMode | CISCO-LWAPP-DOT11-CLIENT-MIB |