All MIBs › CISCO-LWAPP-DOT11-CLIENT-MIB › ciscoLwappDot11ClientMovedToRunState
ciscoLwappDot11ClientMovedToRunState
Module: CISCO-LWAPP-DOT11-CLIENT-MIB
OID (symbolic): CISCO-LWAPP-DOT11-CLIENT-MIB::ciscoLwappDot11ClientMovedToRunState
OID (numeric): 1.3.6.1.4.1.9.9.599.0.4
Node type: NOTIFICATION-TYPE
Description: This notification is generated when the client completes the PEM state and moves to the RUN state. cldcClientUsername represents the username used by the client. cldcClientIPAddress represents the unique ipaddress of the client. cldcClientSSID represents the SSID of the WLAN to which the client is associated. cldcApMacAddress represents the MacAddress of the AP to which the client is associated. cLApDot11IfSlotId represents the slotId of the AP to which the client is associated. cLApName represents the name of the AP to which the client is associated.
What is ciscoLwappDot11ClientMovedToRunState?
This notification fires when a wireless client finishes authentication and begins active data transfer. It signals that a client has successfully completed the PEM (provisioning/encryption/mapping) state. An operator monitoring these events would spot unusual connection patterns or troubleshoot why a client keeps dropping back to PEM state.
Examples
Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):
snmptrap -v2c -c public <manager> '' CISCO-LWAPP-DOT11-CLIENT-MIB::ciscoLwappDot11ClientMovedToRunState snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.9.9.599.0.4
Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):
snmptrapd -f -Lo -c /dev/null authCommunity log public
Example snmptrapd log entry:
zoo11-linux.zoo [UDP: [192.168.30.111]:54984->[192.168.30.10]:162]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (414877896) 48 days, 0:26:18.96 SNMPv2-MIB::snmpTrapOID.0 = OID: CISCO-LWAPP-DOT11-CLIENT-MIB::ciscoLwappDot11ClientMovedToRunState
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-DOT11-CLIENT-MIB::ciscoLwappDot11ClientMovedToRunState OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.599 | ciscoLwappDot11ClientMIB | CISCO-LWAPP-DOT11-CLIENT-MIB |
| 1.3.6.1.4.1.9.9.599.0 | ciscoLwappDot11ClientMIBNotifs | CISCO-LWAPP-DOT11-CLIENT-MIB |
| 1.3.6.1.4.1.9.9.599.0.4 | ciscoLwappDot11ClientMovedToRunState | CISCO-LWAPP-DOT11-CLIENT-MIB |