All MIBs › AWCVX-MIB › enableSNMP
enableSNMP
Module: AWCVX-MIB
OID (symbolic): AWCVX-MIB::enableSNMP
OID (numeric): 1.3.6.1.4.1.522.3.1.10
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: If true, the Access Point's SNMP agent can accept connections from other network devices. If false, all SNMP connections will be refused. Note that this can only be set to false by an SNMP management station. If false, it can only be set to true by non-SNMP means.
What is enableSNMP?
Controls whether the Access Point's SNMP agent accepts management connections from the network. This can only be disabled via SNMP itself, so care should be taken to avoid locking out remote management.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.522.3.1.10 snmpwalk -v2c -c public <target> AWCVX-MIB::enableSNMP
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.522.3.1.10.1 snmpget -v2c -c public <target> AWCVX-MIB::enableSNMP.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.522.3.1.10.1 s <value>
Start monitoring Cisco Aironet 802.11 wireless access points/bridges (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AWCVX-MIB::enableSNMP OID value, configure state conditions and alerts, and monitor any Cisco Aironet 802.11 wireless access points/bridges (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.522 | aironet | AWCVX-MIB |
| 1.3.6.1.4.1.522.3 | awcVx | AWCVX-MIB |
| 1.3.6.1.4.1.522.3.1 | awcSystem | AWCVX-MIB |
| 1.3.6.1.4.1.522.3.1.10 | enableSNMP | AWCVX-MIB |