AWCVX-MIB :: enableSTP

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAWCVX-MIBenableSTP

enableSTP

Module: AWCVX-MIB

OID (symbolic): AWCVX-MIB::enableSTP

OID (numeric): 1.3.6.1.4.1.522.3.1.27

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: If true and the system is licensed with Bridge capabilities, the IEEE 802.1D Spanning Tree Protocol will be be used to control packet forwarding on all network interfaces. If false or the system is not licensed with Bridge capabilities, the system will use Access Point heuristics to control packet forwarding on all network interfaces.

What is enableSTP?

Controls whether IEEE 802.1D Spanning Tree Protocol is active on all network interfaces when the system has bridge capabilities licensed. When enabled, STP prevents network loops by managing packet forwarding paths across the device.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.522.3.1.27
snmpwalk -v2c -c public <target> AWCVX-MIB::enableSTP

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.522.3.1.27.1
snmpget -v2c -c public <target> AWCVX-MIB::enableSTP.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.522.3.1.27.1 s <value>

Start monitoring Cisco Aironet 802.11 wireless access points/bridges (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AWCVX-MIB::enableSTP OID value, configure state conditions and alerts, and monitor any Cisco Aironet 802.11 wireless access points/bridges (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.522aironetAWCVX-MIB
1.3.6.1.4.1.522.3awcVxAWCVX-MIB
1.3.6.1.4.1.522.3.1awcSystemAWCVX-MIB
1.3.6.1.4.1.522.3.1.27enableSTPAWCVX-MIB