AWCVX-MIB :: awcDot11AuxSSIDAuthAlgDefaultUcastAllowedToGoTo

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAWCVX-MIBawcDot11AuxSSIDAuthAlgDefaultUcastAllowedToGoTo

awcDot11AuxSSIDAuthAlgDefaultUcastAllowedToGoTo

Module: AWCVX-MIB

OID (symbolic): AWCVX-MIB::awcDot11AuxSSIDAuthAlgDefaultUcastAllowedToGoTo

OID (numeric): 1.3.6.1.4.1.522.3.6.1.8.1.4

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: The set of ports to which frames received from a specific port and destined for a MAC address which is not already listed in dot1dStaticTable and authenticates to the SSID specified by awcDot11AuxSSIDIndex with the corresponding dot11AuthenticationAlgorithm, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length.

What is awcDot11AuxSSIDAuthAlgDefaultUcastAllowedToGoTo?

Specifies which bridge ports unicast frames may be forwarded to for stations that authenticated via an auxiliary SSID but whose MAC address is not yet in the static forwarding table. It acts as a default egress port set for such stations.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.522.3.6.1.8.1.4
snmpwalk -v2c -c public <target> AWCVX-MIB::awcDot11AuxSSIDAuthAlgDefaultUcastAllowedToGoTo

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.522.3.6.1.8.1.4.1
snmpget -v2c -c public <target> AWCVX-MIB::awcDot11AuxSSIDAuthAlgDefaultUcastAllowedToGoTo.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.522.3.6.1.8.1.4.1 s <value>

Start monitoring Cisco Aironet 802.11 wireless access points/bridges (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AWCVX-MIB::awcDot11AuxSSIDAuthAlgDefaultUcastAllowedToGoTo OID value, configure state conditions and alerts, and monitor any Cisco Aironet 802.11 wireless access points/bridges (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.522aironetAWCVX-MIB
1.3.6.1.4.1.522.3awcVxAWCVX-MIB
1.3.6.1.4.1.522.3.6awc802dot11AWCVX-MIB
1.3.6.1.4.1.522.3.6.1awcDot11smtAWCVX-MIB
1.3.6.1.4.1.522.3.6.1.8awcDot11AuxSSIDAuthAlgTableAWCVX-MIB
1.3.6.1.4.1.522.3.6.1.8.1awcDot11AuxSSIDAuthAlgEntryAWCVX-MIB
1.3.6.1.4.1.522.3.6.1.8.1.4awcDot11AuxSSIDAuthAlgDefaultUcastAllowedToGoToAWCVX-MIB