All MIBs › AWCVX-MIB › enableWDB
enableWDB
Module: AWCVX-MIB
OID (symbolic): AWCVX-MIB::enableWDB
OID (numeric): 1.3.6.1.4.1.522.3.1.14
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: If true, the Access Point will enable use of the VxWorks WDB debugger upon its next reboot. If false, no WDB debugging services will be available after the next reboot. The value of enableWDB is applicable only to special diagnostic versions of the Access Point system code.
What is enableWDB?
Determines whether the VxWorks WDB (Wind DeBug) agent is activated on the next reboot of the Access Point. Enabling this provides low-level debugging services, which is typically used only during troubleshooting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.522.3.1.14 snmpwalk -v2c -c public <target> AWCVX-MIB::enableWDB
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.522.3.1.14.1 snmpget -v2c -c public <target> AWCVX-MIB::enableWDB.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.522.3.1.14.1 s <value>
Start monitoring Cisco Aironet 802.11 wireless access points/bridges (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AWCVX-MIB::enableWDB OID value, configure state conditions and alerts, and monitor any Cisco Aironet 802.11 wireless access points/bridges (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.522 | aironet | AWCVX-MIB |
| 1.3.6.1.4.1.522.3 | awcVx | AWCVX-MIB |
| 1.3.6.1.4.1.522.3.1 | awcSystem | AWCVX-MIB |
| 1.3.6.1.4.1.522.3.1.14 | enableWDB | AWCVX-MIB |