All MIBs › APTIS-MONITOR-MIB
Organization: Nortel Networks
Last Updated: 2000-04-14
Category: DSL and Broadband
Description: Nortel Networks Aptis DSL concentrator performance monitoring and statistics collection.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is APTIS-MONITOR-MIB?
This is a Nortel Networks private MIB for monitoring performance and status on Aptis DSL concentrators, a line of DSL access multiplexer equipment used by service providers to aggregate subscriber DSL lines. It exposes performance and status variables for the DSL concentrator's subscriber-facing lines. Its monitoring emphasis is on performance counters and line status: per-line error and synchronization statistics reveal the health of individual DSL subscriber loops, which is the primary hardware/signal-quality indicator for this class of device. It predates and stands largely independent of the later standardized xDSL-Line MIBs, functioning as Nortel's own proprietary performance-monitoring extension for the Aptis platform. It was deployed at ISP central offices where Aptis concentrators aggregated many residential/business DSL subscriber lines onto a shared backbone. Engineers can download the APTIS-MONITOR-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in APTIS-MONITOR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nortel Aptis DSL concentrator/access multiplexer
Monitoring Examples
No sample object names were provided for this MIB, so specific identifiers can't be cited here. Conceptually, an operator would poll per-DSL-line performance counters, such as errored-seconds counts and line synchronization/rate status, and a line showing a rising error count or repeated loss of sync would reveal a degrading subscriber DSL loop needing a truck roll or line-card investigation.
What Can Be Monitored
- DSL line performance counters
- line error/errored-seconds statistics
- line synchronization/status
This MIB depends on
Related MIBs
Imported Objects
From APTIS-MIB
| Boolean | |
| aptis-monitoring |
From APTIS-REG-MIB
| aptis-modules |
From SNMPv2-SMI
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE |
From SNMPv2-TC
| DisplayString | |
| RowStatus |
How to Use in IPNetwork Monitor
Example using clockStatusCurrentSource OID:
Select a Nortel Networks Aptis DSL concentrator/access multiplexer (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type clockStatusCurrentSource into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the current Clock Source. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value changes unexpectedly, since which clock source is correct depends on your redundancy topology and an unplanned change often indicates a failover. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| aptisMonitorModule | 1.3.6.1.4.1.2637.1.1.4 | The following tables describe the variables that allow monitoring of an Aptis box. | ||
| INT cHdlcStatsCiscoFramesIn | 1.3.6.1.4.1.2637.2.2.1211.1.10 | INTEGER | read-only | Count of Cisco control frames received. |
| INT cHdlcStatsCiscoFramesOut | 1.3.6.1.4.1.2637.2.2.1211.1.3 | INTEGER | read-only | Count of frames output. |
| cHdlcStatsEntry | 1.3.6.1.4.1.2637.2.2.1211.1 | not-accessible | This is the structure of entries in the cHdlcStatsTable. | |
| INT cHdlcStatsKeepalivesIn | 1.3.6.1.4.1.2637.2.2.1211.1.4 | INTEGER | read-only | Count of keep-alives received. |
| INT cHdlcStatsNohdrspaceOut | 1.3.6.1.4.1.2637.2.2.1211.1.1 | INTEGER | read-only | Packet dropped due to lack of header space. |
| INT cHdlcStatsNomemoryOut | 1.3.6.1.4.1.2637.2.2.1211.1.2 | INTEGER | read-only | Packet dropped due to lack of memory. |
| INT cHdlcStatsPppFramesIn | 1.3.6.1.4.1.2637.2.2.1211.1.7 | INTEGER | read-only | Count of PPP frames received. |
| INT cHdlcStatsShortFramesIn | 1.3.6.1.4.1.2637.2.2.1211.1.6 | INTEGER | read-only | Count of too-short frames received. |
| cHdlcStatsTable | 1.3.6.1.4.1.2637.2.2.1211 | not-accessible | Cisco High Level Data Link Control Status Information. | |
| INT cHdlcStatsUnknownCiscoTypeIn | 1.3.6.1.4.1.2637.2.2.1211.1.9 | INTEGER | read-only | Count of unknown Cisco control frames received. |
| INT cHdlcStatsUnknownFramesIn | 1.3.6.1.4.1.2637.2.2.1211.1.8 | INTEGER | read-only | Count of unknown frames received. |
| INT cHdlcStatsUnknownProtocolIn | 1.3.6.1.4.1.2637.2.2.1211.1.5 | INTEGER | read-only | Count of unknown protocols received. |
| INT clockStatusCurrentSourceEx | 1.3.6.1.4.1.2637.2.2.2901.1.1 | INTEGER | read-only | Current Clock Source. |
| clockStatusEntry | 1.3.6.1.4.1.2637.2.2.2901.1 | not-accessible | This is the structure of entries in the clockStatusTable. | |
| clockStatusTable | 1.3.6.1.4.1.2637.2.2.2901 | not-accessible | Clock Status. | |
| INT dacClockingClockSourcePrimary | 1.3.6.1.4.1.2637.2.2.2050.1.2 | INTEGER | read-only | DAC Primary Clocking Source. |
| INT dacClockingClockSourceSecondary | 1.3.6.1.4.1.2637.2.2.2050.1.3 | INTEGER | read-only | DAC Secondary Clocking Source. |
| dacClockingEntry | 1.3.6.1.4.1.2637.2.2.2050.1 | not-accessible | This is the structure of entries in the dacClockingTable. | |
| BOO dacClockingForce | 1.3.6.1.4.1.2637.2.2.2050.1.4 | Boolean | read-only | DAC Clocking FORCE Flag. |
| INT dacClockingIndex | 1.3.6.1.4.1.2637.2.2.2050.1.1 | INTEGER | read-only | DAC Clocking Information Index. |
| dacClockingTable | 1.3.6.1.4.1.2637.2.2.2050 | not-accessible | DAC Clocking Information. | |
| INT dacStatusClockSourcePrimary | 1.3.6.1.4.1.2637.2.2.2002.1.1 | INTEGER | read-only | DAC Primary Clocking Source. |
| INT dacStatusClockSourceSecondary | 1.3.6.1.4.1.2637.2.2.2002.1.2 | INTEGER | read-only | DAC Secondary Clocking Source. |
| dacStatusEntry | 1.3.6.1.4.1.2637.2.2.2002.1 | not-accessible | This is the structure of entries in the dacStatusTable. | |
| INT dacStatusLTMType | 1.3.6.1.4.1.2637.2.2.2002.1.3 | INTEGER | read-only | DAC LTM (Line Termination Module) Type. |
| dacStatusTable | 1.3.6.1.4.1.2637.2.2.2002 | not-accessible | DAC Status Information. | |
| OCT dacTraceData | 1.3.6.1.4.1.2637.2.2.2003.1.7 | OCTET STRING | read-only | DAC Trace Message Text. |
| INT dacTraceDirection | 1.3.6.1.4.1.2637.2.2.2003.1.3 | INTEGER | read-only | DAC Trace Message Source Layer. |
| dacTraceEntry | 1.3.6.1.4.1.2637.2.2.2003.1 | not-accessible | This is the structure of entries in the dacTraceTable. | |
| INT dacTraceIndex | 1.3.6.1.4.1.2637.2.2.2003.1.1 | INTEGER | read-only | DAC index value. |
| INT dacTraceLen | 1.3.6.1.4.1.2637.2.2.2003.1.6 | INTEGER | read-only | DAC Trace Message Character Length. |
| INT dacTraceLocation | 1.3.6.1.4.1.2637.2.2.2003.1.2 | INTEGER | read-only | DAC Trace Message Source. |
| dacTraceTable | 1.3.6.1.4.1.2637.2.2.2003 | not-accessible | DAC Trace Configuration. | |
| INT dacTraceTimestamp | 1.3.6.1.4.1.2637.2.2.2003.1.5 | INTEGER | read-only | DAC Trace Message Timestamp. |
| INT dacTraceType | 1.3.6.1.4.1.2637.2.2.2003.1.4 | INTEGER | read-only | DAC Trace Message Typecode. |
| INT ds0StatsDs0Index | 1.3.6.1.4.1.2637.2.2.2112.1.9 | INTEGER | read-only | The DS0 time slot for which the stats apply. |
| ds0StatsEntry | 1.3.6.1.4.1.2637.2.2.2112.1 | not-accessible | This is the structure of entries in the ds0StatsTable. | |
| INT ds0StatsInCalls | 1.3.6.1.4.1.2637.2.2.2112.1.1 | INTEGER | read-only | Number of attempted incoming calls. |
| INT ds0StatsInCleared | 1.3.6.1.4.1.2637.2.2.2112.1.5 | INTEGER | read-only | Number of calls disconnected from CVX Access Switch. It is possible that the number of calls cleared may total higher than the number of calls attempted. This can occur if the user and the switch disconnect simultaneously. |
| INT ds0StatsInConnected | 1.3.6.1.4.1.2637.2.2.2112.1.2 | INTEGER | read-only | Number of connected incoming calls. |
| INT ds0StatsLineNumber | 1.3.6.1.4.1.2637.2.2.2112.1.8 | INTEGER | read-only | The line number of the line to which the stats apply. |
| INT ds0StatsOutCalls | 1.3.6.1.4.1.2637.2.2.2112.1.3 | INTEGER | read-only | Number of attempted outgoing calls. |
| INT ds0StatsOutCleared | 1.3.6.1.4.1.2637.2.2.2112.1.6 | INTEGER | read-only | Number of calls disconnected remotely. |
| INT ds0StatsOutConnected | 1.3.6.1.4.1.2637.2.2.2112.1.4 | INTEGER | read-only | Number of connected outgoing calls. |
| INT ds0StatsSlotIndex | 1.3.6.1.4.1.2637.2.2.2112.1.7 | INTEGER | read-only | The physical slot number associated with this line. |
| ds0StatsTable | 1.3.6.1.4.1.2637.2.2.2112 | not-accessible | DS0 Stats. | |
| dvsDeadLogEntryEntry | 1.3.6.1.4.1.2637.2.2.1520.1 | not-accessible | This is the structure of entries in the dvsDeadLogEntryTable. | |
| OCT dvsDeadLogEntryEntryText | 1.3.6.1.4.1.2637.2.2.1520.1.4 | OCTET STRING | read-only | Log entry text. |
| INT dvsDeadLogEntryIndex | 1.3.6.1.4.1.2637.2.2.1520.1.1 | INTEGER | read-only | Log entry index |
| INT dvsDeadLogEntryMaxIndex | 1.3.6.1.4.1.2637.2.2.1520.1.3 | INTEGER | read-only | Index of newest event available |
| INT dvsDeadLogEntryMinIndex | 1.3.6.1.4.1.2637.2.2.1520.1.2 | INTEGER | read-only | Index of oldest event available |
| dvsDeadLogEntryTable | 1.3.6.1.4.1.2637.2.2.1520 | not-accessible | DVS Tunnel dead log entry. | |
| INT dvsDeadLogEntryTunnelCLID | 1.3.6.1.4.1.2637.2.2.1520.1.5 | INTEGER | read-only | The Local Identifier for this tunnel |
| INT dvsDeadLogEntryUpTime | 1.3.6.1.4.1.2637.2.2.1520.1.6 | INTEGER | read-only | Time this tunnel has been active |
| dvsLogEntryEntry | 1.3.6.1.4.1.2637.2.2.1506.1 | not-accessible | This is the structure of entries in the dvsLogEntryTable. | |
| OCT dvsLogEntryEntryText | 1.3.6.1.4.1.2637.2.2.1506.1.4 | OCTET STRING | read-only | Log entry text. |
| INT dvsLogEntryIndex | 1.3.6.1.4.1.2637.2.2.1506.1.1 | INTEGER | read-only | Log entry index |
| INT dvsLogEntryMaxIndex | 1.3.6.1.4.1.2637.2.2.1506.1.3 | INTEGER | read-only | Index of newest event available |
| INT dvsLogEntryMinIndex | 1.3.6.1.4.1.2637.2.2.1506.1.2 | INTEGER | read-only | Index of oldest event available |
| dvsLogEntryTable | 1.3.6.1.4.1.2637.2.2.1506 | not-accessible | DVS Tunnel log entry. | |
| INT dvsLogEntryTunnelCLID | 1.3.6.1.4.1.2637.2.2.1506.1.5 | INTEGER | read-only | The Local Identifier for this tunnel |
| INT dvsLogEntryUpTime | 1.3.6.1.4.1.2637.2.2.1506.1.6 | INTEGER | read-only | Time this tunnel has been active |
| BOO dvsStatusDeadDeadSession | 1.3.6.1.4.1.2637.2.2.1521.1.13 | Boolean | read-only | True if session is dead/disconnected |
| dvsStatusDeadEntry | 1.3.6.1.4.1.2637.2.2.1521.1 | not-accessible | This is the structure of entries in the dvsStatusDeadTable. | |
| INT dvsStatusDeadGreChecksumError | 1.3.6.1.4.1.2637.2.2.1521.1.10 | INTEGER | read-only | The total number of GRE packets received with bad checksums for this tunnel. |
| INT dvsStatusDeadGreInDropped | 1.3.6.1.4.1.2637.2.2.1521.1.11 | INTEGER | read-only | The total number of GRE packets dropped on receive for this tunnel. |
| INT dvsStatusDeadGreInPackets | 1.3.6.1.4.1.2637.2.2.1521.1.8 | INTEGER | read-only | The total number of GRE packets received on the tunnel. |
| INT dvsStatusDeadGreOutDropped | 1.3.6.1.4.1.2637.2.2.1521.1.12 | INTEGER | read-only | The total number of GRE packets dropped on send for this tunnel. |
| INT dvsStatusDeadGreOutPackets | 1.3.6.1.4.1.2637.2.2.1521.1.9 | INTEGER | read-only | The total number of GRE packets sent on the tunnel. |
| INT dvsStatusDeadMacSlotNumber | 1.3.6.1.4.1.2637.2.2.1521.1.6 | INTEGER | read-only | The slot number of the MAC card that is the local endpoint for this tunnel. |
| IP dvsStatusDeadRemoteAddress | 1.3.6.1.4.1.2637.2.2.1521.1.3 | IpAddress | read-only | The IP address of the remote gateway for the tunnel. |
| INT dvsStatusDeadRemoteCLID | 1.3.6.1.4.1.2637.2.2.1521.1.2 | INTEGER | read-only | The identifier of the remote endpoint for this tunnel. |
| BOO dvsStatusDeadSession | 1.3.6.1.4.1.2637.2.2.1505.1.14 | Boolean | read-only | True if session is dead/disconnected |
| dvsStatusDeadTable | 1.3.6.1.4.1.2637.2.2.1521 | not-accessible | DVS Tunnel dead status. | |
| INT dvsStatusDeadTunnelCLID | 1.3.6.1.4.1.2637.2.2.1521.1.1 | INTEGER | read-only | The local identifier for this tunnel |
| INT dvsStatusDeadTunnelState | 1.3.6.1.4.1.2637.2.2.1521.1.4 | INTEGER | read-only | The current state of the tunnel. |
| INT dvsStatusDeadUpTime | 1.3.6.1.4.1.2637.2.2.1521.1.5 | INTEGER | read-only | The time this tunnel has been active. |
| INT dvsStatusDeadVPOP | 1.3.6.1.4.1.2637.2.2.1521.1.7 | INTEGER | read-only | The VPOP id to which this tunnel belongs. |
| dvsStatusEntry | 1.3.6.1.4.1.2637.2.2.1505.1 | not-accessible | This is the structure of entries in the dvsStatusTable. | |
| INT dvsStatusGreChecksumError | 1.3.6.1.4.1.2637.2.2.1505.1.11 | INTEGER | read-only | The total number of GRE packets received with bad checksums for this tunnel. |
| INT dvsStatusGreInDropped | 1.3.6.1.4.1.2637.2.2.1505.1.12 | INTEGER | read-only | The total number of GRE packets dropped on receive for this tunnel. |
| INT dvsStatusGreInPackets | 1.3.6.1.4.1.2637.2.2.1505.1.9 | INTEGER | read-only | The total number of GRE packets received on the tunnel. |
| INT dvsStatusGreOutDropped | 1.3.6.1.4.1.2637.2.2.1505.1.13 | INTEGER | read-only | The total number of GRE packets dropped on send for this tunnel. |
| INT dvsStatusGreOutPackets | 1.3.6.1.4.1.2637.2.2.1505.1.10 | INTEGER | read-only | The total number of GRE packets sent on the tunnel. |
| INT dvsStatusIPInPackets | 1.3.6.1.4.1.2637.2.2.1505.1.17 | INTEGER | read-only | Total number of IP packets received |
| INT dvsStatusIPOutPackets | 1.3.6.1.4.1.2637.2.2.1505.1.18 | INTEGER | read-only | Total number of IP packets tunneled |
| INT dvsStatusIPXInPackets | 1.3.6.1.4.1.2637.2.2.1505.1.19 | INTEGER | read-only | Total number of IPX packets received |
| INT dvsStatusIPXOutPackets | 1.3.6.1.4.1.2637.2.2.1505.1.20 | INTEGER | read-only | Total number of IPX packets tunneled |
| IP dvsStatusLocalAddress | 1.3.6.1.4.1.2637.2.2.1505.1.3 | IpAddress | read-only | The local IP address used to send tunnel packets to the gateway. |
| INT dvsStatusLocalCLID | 1.3.6.1.4.1.2637.2.2.1505.1.1 | INTEGER | read-only | The local identifier for this tunnel |
| INT dvsStatusMacSlotNumber | 1.3.6.1.4.1.2637.2.2.1505.1.7 | INTEGER | read-only | The slot number of the MAC card that is the local endpoint for this tunnel. |
| IP dvsStatusRemoteAddress | 1.3.6.1.4.1.2637.2.2.1505.1.4 | IpAddress | read-only | The IP address of the remote gateway for the tunnel. |
| INT dvsStatusRemoteCLID | 1.3.6.1.4.1.2637.2.2.1505.1.2 | INTEGER | read-only | The identifier of the remote endpoint for this tunnel. |
| INT dvsStatusRemoteIPXNetwork | 1.3.6.1.4.1.2637.2.2.1505.1.15 | INTEGER | read-only | Remote IPX Network Number |
| STR dvsStatusRemoteIPXNode | 1.3.6.1.4.1.2637.2.2.1505.1.16 | DisplayString | read-only | IPX node number to assign to remote user. |
| dvsStatusTable | 1.3.6.1.4.1.2637.2.2.1505 | not-accessible | DVS Tunnel status. | |
| INT dvsStatusTunnelState | 1.3.6.1.4.1.2637.2.2.1505.1.5 | INTEGER | read-only | The current state of the tunnel. |
| INT dvsStatusUpTime | 1.3.6.1.4.1.2637.2.2.1505.1.6 | INTEGER | read-only | The time this tunnel has been active. |
| INT dvsStatusVPOP | 1.3.6.1.4.1.2637.2.2.1505.1.8 | INTEGER | read-only | The VPOP id to which this tunnel belongs. |
| INT e1CountsChannelCount | 1.3.6.1.4.1.2637.2.2.2503.1.1 | INTEGER | read-only | DS0s (B-channels) on this interface. |
| INT e1CountsChannelsInUse | 1.3.6.1.4.1.2637.2.2.2503.1.2 | INTEGER | read-only | DS0s (B-channels) in use. |
| e1CountsEntry | 1.3.6.1.4.1.2637.2.2.2503.1 | not-accessible | This is the structure of entries in the e1CountsTable. | |
| INT e1CountsIncomingCallAttempts | 1.3.6.1.4.1.2637.2.2.2503.1.3 | INTEGER | read-only | Incoming call attempts on this E1. |
| INT e1CountsIncomingConnects | 1.3.6.1.4.1.2637.2.2.2503.1.4 | INTEGER | read-only | Incoming connect messages. |
| INT e1CountsIncomingDisconnects | 1.3.6.1.4.1.2637.2.2.2503.1.5 | INTEGER | read-only | Incoming disconnect messages. |
| INT e1CountsLineNumber | 1.3.6.1.4.1.2637.2.2.2503.1.11 | INTEGER | read-only | The line number of the line to which the status applies. |
| INT e1CountsOutgoingCallAttempts | 1.3.6.1.4.1.2637.2.2.2503.1.6 | INTEGER | read-only | Outgoing call attempts on this E1. |
| INT e1CountsOutgoingConnects | 1.3.6.1.4.1.2637.2.2.2503.1.7 | INTEGER | read-only | Outgoing connect messages. |
| INT e1CountsOutgoingDisconnects | 1.3.6.1.4.1.2637.2.2.2503.1.8 | INTEGER | read-only | Outgoing disconnect messages. |
| INT e1CountsSessionAbortMessages | 1.3.6.1.4.1.2637.2.2.2503.1.9 | INTEGER | read-only | Abort messages from the session manager. |
| INT e1CountsSlotIndex | 1.3.6.1.4.1.2637.2.2.2503.1.10 | INTEGER | read-only | The physical slot number associated with this line. |
| e1CountsTable | 1.3.6.1.4.1.2637.2.2.2503 | not-accessible | E1_counts. | |
| INT e1StatsAlarmStatus | 1.3.6.1.4.1.2637.2.2.2502.1.1 | INTEGER | read-only | E1 layer 1 state. |
| e1StatsEntry | 1.3.6.1.4.1.2637.2.2.2502.1 | not-accessible | This is the structure of entries in the e1StatsTable. | |
| INT e1StatsLineNumber | 1.3.6.1.4.1.2637.2.2.2502.1.3 | INTEGER | read-only | The line number of the line to which the status applies. |
| INT e1StatsSlotIndex | 1.3.6.1.4.1.2637.2.2.2502.1.2 | INTEGER | read-only | The physical slot number associated with this line. |
| e1StatsTable | 1.3.6.1.4.1.2637.2.2.2502 | not-accessible | E1 stats. | |
| INT e1SummaryStatsClearingChannels | 1.3.6.1.4.1.2637.2.2.2504.1.3 | INTEGER | read-only | Bit mask of b-channels that have calls going down, with b-channel 1 at 0x02, 2 at 0x04, etc. |
| INT e1SummaryStatsConnectedChannels | 1.3.6.1.4.1.2637.2.2.2504.1.2 | INTEGER | read-only | Bit mask of b-channels that have calls connected, with b-channel 1 at 0x02, 2 at 0x04, etc. |
| e1SummaryStatsEntry | 1.3.6.1.4.1.2637.2.2.2504.1 | not-accessible | This is the structure of entries in the e1SummaryStatsTable. | |
| INT e1SummaryStatsFunctionalChannels | 1.3.6.1.4.1.2637.2.2.2504.1.6 | INTEGER | read-only | Bit mask of b-channels that are in the functional state. |
| INT e1SummaryStatsIdleChannels | 1.3.6.1.4.1.2637.2.2.2504.1.7 | INTEGER | read-only | Bit mask of b-channels that are in the idle state. |
| INT e1SummaryStatsLineNumber | 1.3.6.1.4.1.2637.2.2.2504.1.5 | INTEGER | read-only | The line number of the line to which the status applies. |
| INT e1SummaryStatsRingingChannels | 1.3.6.1.4.1.2637.2.2.2504.1.1 | INTEGER | read-only | Bit mask of b-channels that have calls coming up, with b-channel 1 at 0x02, 2 at 0x04, etc. |
| INT e1SummaryStatsSlotIndex | 1.3.6.1.4.1.2637.2.2.2504.1.4 | INTEGER | read-only | The physical slot number associated with this line. |
| e1SummaryStatsTable | 1.3.6.1.4.1.2637.2.2.2504 | not-accessible | E1 Summary Stats. | |
| INT ipAlarmEntryAlarmType | 1.3.6.1.4.1.2637.2.2.1196.1.1 | INTEGER | read-only | Type of this alarm. |
| ipAlarmEntryEntry | 1.3.6.1.4.1.2637.2.2.1196.1 | not-accessible | This is the structure of entries in the ipAlarmEntryTable. | |
| ipAlarmEntryTable | 1.3.6.1.4.1.2637.2.2.1196 | not-accessible | IP alarm entry table. | |
| STR ipAlarmEntryTrapArg1 | 1.3.6.1.4.1.2637.2.2.1196.1.11 | DisplayString | read-only | first trap specific variable sent in onset trap PDU. |
| STR ipAlarmEntryTrapArg2 | 1.3.6.1.4.1.2637.2.2.1196.1.12 | DisplayString | read-only | second trap specific variable sent in onset trap PDU. |
| STR ipAlarmEntryTrapArg3 | 1.3.6.1.4.1.2637.2.2.1196.1.13 | DisplayString | read-only | third trap specific variable sent in onset trap PDU. |
| INT ipAlarmEntryTrapGenNum | 1.3.6.1.4.1.2637.2.2.1196.1.2 | INTEGER | read-only | trapGen sent in onset trap PDU. |
| INT ipAlarmEntryTrapGroup | 1.3.6.1.4.1.2637.2.2.1196.1.14 | INTEGER | read-only | Notes whether this trap is a standard defined trap, or CVX proprietary |
| OCT ipAlarmEntryTrapOID | 1.3.6.1.4.1.2637.2.2.1196.1.4 | OCTET STRING | read-only | trap object id sent in onset trap PDU. |
| INT ipAlarmEntryTrapOIDLen | 1.3.6.1.4.1.2637.2.2.1196.1.5 | INTEGER | read-only | trap object id length sent in onset trap PDU. |
| STR ipAlarmEntryTrapPath | 1.3.6.1.4.1.2637.2.2.1196.1.8 | DisplayString | read-only | trapPath sent in onset trap PDU. |
| INT ipAlarmEntryTrapSeverity | 1.3.6.1.4.1.2637.2.2.1196.1.6 | INTEGER | read-only | trapSeverity sent in onset trap PDU. |
| INT ipAlarmEntryTrapTimeticks | 1.3.6.1.4.1.2637.2.2.1196.1.7 | INTEGER | read-only | sysuptime when onset trap PDU was sent. |
| INT ipAlarmEntryTrapType | 1.3.6.1.4.1.2637.2.2.1196.1.3 | INTEGER | read-only | trapType sent in onset trap PDU. |
| ipCleartcpStatsEntry | 1.3.6.1.4.1.2637.2.2.1231.1 | not-accessible | This is the structure of entries in the ipCleartcpStatsTable. | |
| INT ipCleartcpStatsInputBytes | 1.3.6.1.4.1.2637.2.2.1231.1.4 | INTEGER | read-only | Total number of input bytes. |
| INT ipCleartcpStatsInputDroppedBytes | 1.3.6.1.4.1.2637.2.2.1231.1.3 | INTEGER | read-only | Total number of input bytes dropped (all causes). |
| INT ipCleartcpStatsInputQfull | 1.3.6.1.4.1.2637.2.2.1231.1.1 | INTEGER | read-only | Number of pbufs dropped because input queue was full. |
| INT ipCleartcpStatsInputTcpfull | 1.3.6.1.4.1.2637.2.2.1231.1.2 | INTEGER | read-only | Number of pbufs dropped because TCP input queue was full. |
| INT ipCleartcpStatsOutputBytes | 1.3.6.1.4.1.2637.2.2.1231.1.7 | INTEGER | read-only | Total number of output bytes. |
| INT ipCleartcpStatsOutputDroppedBytes | 1.3.6.1.4.1.2637.2.2.1231.1.6 | INTEGER | read-only | Total number of output bytes dropped (all causes). |
| INT ipCleartcpStatsOutputQfull | 1.3.6.1.4.1.2637.2.2.1231.1.5 | INTEGER | read-only | Number of pbufs dropped because output queue was full. |
| ipCleartcpStatsTable | 1.3.6.1.4.1.2637.2.2.1231 | not-accessible | ClearTCP Statistics. | |
| INT ipdcTraceDirection | 1.3.6.1.4.1.2637.2.2.504.1.3 | INTEGER | read-only | The direction of this message. |
| ipdcTraceEntry | 1.3.6.1.4.1.2637.2.2.504.1 | not-accessible | This is the structure of entries in the ipdcTraceTable. | |
| INT ipdcTraceIndex | 1.3.6.1.4.1.2637.2.2.504.1.1 | INTEGER | read-only | The internal reference number for this trace entry. |
| OCT ipdcTraceIpdcMsg | 1.3.6.1.4.1.2637.2.2.504.1.5 | OCTET STRING | read-only | An array of octets representing an ipdc message. |
| INT ipdcTraceMsgSize | 1.3.6.1.4.1.2637.2.2.504.1.4 | INTEGER | read-only | The number of octets in this ipsc message. |
| ipdcTraceTable | 1.3.6.1.4.1.2637.2.2.504 | not-accessible | IPDC trace table. | |
| INT ipdcTraceTimeStamp | 1.3.6.1.4.1.2637.2.2.504.1.2 | INTEGER | read-only | The time that this event occurred, in milliseconds relative to SysUpTime. |
| ipsecCountersEntry | 1.3.6.1.4.1.2637.2.2.1612.1 | not-accessible | This is the structure of entries in the ipsecCountersTable. | |
| INT ipsecCountersInboundCounter | 1.3.6.1.4.1.2637.2.2.1612.1.2 | INTEGER | read-only | Specifies number of the inbound packets processed by the IPSec module. |
| INT ipsecCountersInboundDropCounter | 1.3.6.1.4.1.2637.2.2.1612.1.4 | INTEGER | read-only | Specifies number of the inbound packets dropped by the IPSec module. |
| INT ipsecCountersOutboundCounter | 1.3.6.1.4.1.2637.2.2.1612.1.1 | INTEGER | read-only | Specifies number of the outbound packets processed by the IPSec module. |
| INT ipsecCountersOutboundDropCounter | 1.3.6.1.4.1.2637.2.2.1612.1.3 | INTEGER | read-only | Specifies number of the outbound packets dropped by the IPSec module. |
| ipsecCountersTable | 1.3.6.1.4.1.2637.2.2.1612 | not-accessible | IPSec Statistics Counters | |
| INT ipstatIgmpEntryCliId | 1.3.6.1.4.1.2637.2.2.3801.1.3 | INTEGER | read-only | IGMP Client ID. |
| INT ipstatIgmpEntryCount | 1.3.6.1.4.1.2637.2.2.3801.1.5 | INTEGER | read-only | IGMP use count. |
| ipstatIgmpEntryEntry | 1.3.6.1.4.1.2637.2.2.3801.1 | not-accessible | This is the structure of entries in the ipstatIgmpEntryTable. | |
| IP ipstatIgmpEntryIPAddress | 1.3.6.1.4.1.2637.2.2.3801.1.1 | IpAddress | read-only | IGMP Multicast Group IP Address. |
| IP ipstatIgmpEntryIPAddrfrom | 1.3.6.1.4.1.2637.2.2.3801.1.2 | IpAddress | read-only | IGMP Host IP Address. |
| INT ipstatIgmpEntryState | 1.3.6.1.4.1.2637.2.2.3801.1.6 | INTEGER | read-only | IGMP State. |
| ipstatIgmpEntryTable | 1.3.6.1.4.1.2637.2.2.3801 | not-accessible | IP Group Management Protocol Information. | |
| INT ipstatIgmpEntryTimeout | 1.3.6.1.4.1.2637.2.2.3801.1.4 | INTEGER | read-only | IGMP Timeout. |
| INT ipstatRouteEntryCircuitId | 1.3.6.1.4.1.2637.2.2.3701.1.8 | INTEGER | read-only | Route Circuit ID. |
| INT ipstatRouteEntryCost | 1.3.6.1.4.1.2637.2.2.3701.1.16 | INTEGER | read-only | Cost. |
| ipstatRouteEntryEntry | 1.3.6.1.4.1.2637.2.2.3701.1 | not-accessible | This is the structure of entries in the ipstatRouteEntryTable. | |
| INT ipstatRouteEntryGenNumber | 1.3.6.1.4.1.2637.2.2.3701.1.4 | INTEGER | read-only | Gen Number. |
| IP ipstatRouteEntryIpAddress | 1.3.6.1.4.1.2637.2.2.3701.1.6 | IpAddress | read-only | Route IP Address. |
| INT ipstatRouteEntryIpMask | 1.3.6.1.4.1.2637.2.2.3701.1.7 | INTEGER | read-only | Route IP Mask. |
| INT ipstatRouteEntryNextIprt | 1.3.6.1.4.1.2637.2.2.3701.1.2 | INTEGER | read-only | Next IP Route. |
| INT ipstatRouteEntryNextIprtIndex | 1.3.6.1.4.1.2637.2.2.3701.1.5 | INTEGER | read-only | Next IP Route Index. |
| INT ipstatRouteEntryOwner | 1.3.6.1.4.1.2637.2.2.3701.1.10 | INTEGER | read-only | Route Owner. |
| OCT ipstatRouteEntryPathAndCost | 1.3.6.1.4.1.2637.2.2.3701.1.11 | OCTET STRING | read-only | Route Path and Cost. |
| INT ipstatRouteEntryPathType | 1.3.6.1.4.1.2637.2.2.3701.1.15 | INTEGER | read-only | Path Type. |
| INT ipstatRouteEntryPrevIndex | 1.3.6.1.4.1.2637.2.2.3701.1.3 | INTEGER | read-only | Prev Index. |
| INT ipstatRouteEntryPrevXxrt | 1.3.6.1.4.1.2637.2.2.3701.1.1 | INTEGER | read-only | Prev IP Route. |
| INT ipstatRouteEntryPrivate | 1.3.6.1.4.1.2637.2.2.3701.1.14 | INTEGER | read-only | Private. |
| ipstatRouteEntryTable | 1.3.6.1.4.1.2637.2.2.3701 | not-accessible | IP Route Entry. | |
| INT ipstatRouteEntryTag | 1.3.6.1.4.1.2637.2.2.3701.1.13 | INTEGER | read-only | Tag. |
| INT ipstatRouteEntryTrig | 1.3.6.1.4.1.2637.2.2.3701.1.12 | INTEGER | read-only | Trigger. |
| INT ipstatRouteEntryTYPE | 1.3.6.1.4.1.2637.2.2.3701.1.9 | INTEGER | read-only | Route Circuit Type. |
| ipStubStatsEntry | 1.3.6.1.4.1.2637.2.2.1221.1 | not-accessible | This is the structure of entries in the ipStubStatsTable. | |
| INT ipStubStatsIgmpInErrors | 1.3.6.1.4.1.2637.2.2.1221.1.2 | INTEGER | read-only | number of times IGMP packets received in error |
| INT ipStubStatsIgmpInMsgs | 1.3.6.1.4.1.2637.2.2.1221.1.1 | INTEGER | read-only | number of IGMP packets received |
| INT ipStubStatsIgmpInQueries | 1.3.6.1.4.1.2637.2.2.1221.1.4 | INTEGER | read-only | number of IGMP query packets received |
| INT ipStubStatsIgmpInReports | 1.3.6.1.4.1.2637.2.2.1221.1.3 | INTEGER | read-only | number of IGMP report packets received |
| INT ipStubStatsIgmpOutMsgs | 1.3.6.1.4.1.2637.2.2.1221.1.6 | INTEGER | read-only | number of IGMP packets sent |
| INT ipStubStatsIgmpUnknownType | 1.3.6.1.4.1.2637.2.2.1221.1.5 | INTEGER | read-only | number of IGMP packets of unknown type received |
| INT ipStubStatsNomemoryOut | 1.3.6.1.4.1.2637.2.2.1221.1.7 | INTEGER | read-only | number of times IGMP not sent due to no memory |
| ipStubStatsTable | 1.3.6.1.4.1.2637.2.2.1221 | not-accessible | IP Stub Stats Information. | |
| ipSvcMonitoringEntry | 1.3.6.1.4.1.2637.2.2.1102.1 | not-accessible | This is the structure of entries in the ipSvcMonitoringTable. | |
| INT ipSvcMonitoringRequestsIn | 1.3.6.1.4.1.2637.2.2.1102.1.10 | INTEGER | read-only | Number of service requests received. |
| INT ipSvcMonitoringRequestsInError | 1.3.6.1.4.1.2637.2.2.1102.1.15 | INTEGER | read-only | Number of service requests in error. |
| INT ipSvcMonitoringRequestsInProgress | 1.3.6.1.4.1.2637.2.2.1102.1.14 | INTEGER | read-only | Number of service requests in progress. |
| INT ipSvcMonitoringRequestsOut | 1.3.6.1.4.1.2637.2.2.1102.1.12 | INTEGER | read-only | Number of service requests issued. |
| INT ipSvcMonitoringResponsesIn | 1.3.6.1.4.1.2637.2.2.1102.1.13 | INTEGER | read-only | Number of service responses received. |
| INT ipSvcMonitoringResponsesInError | 1.3.6.1.4.1.2637.2.2.1102.1.16 | INTEGER | read-only | Number of service responses in error. |
| INT ipSvcMonitoringResponsesOut | 1.3.6.1.4.1.2637.2.2.1102.1.11 | INTEGER | read-only | Number of service responses issued. |
| STR ipSvcMonitoringServiceName | 1.3.6.1.4.1.2637.2.2.1102.1.1 | DisplayString | read-only | Name of IP service. |
| INT ipSvcMonitoringState | 1.3.6.1.4.1.2637.2.2.1102.1.2 | INTEGER | read-only | Current state of the IP service. |
| ipSvcMonitoringTable | 1.3.6.1.4.1.2637.2.2.1102 | not-accessible | IP services monitoring table. | |
| INT ipSvcMonitoringUptime | 1.3.6.1.4.1.2637.2.2.1102.1.3 | INTEGER | read-only | Uptime of the IP service. |
| INT iSDNHDLCFrameDirection | 1.3.6.1.4.1.2637.2.2.2210.1.5 | INTEGER | read-only | transmit or receive |
| iSDNHDLCFrameEntry | 1.3.6.1.4.1.2637.2.2.2210.1 | not-accessible | This is the structure of entries in the iSDNHDLCFrameTable. | |
| INT iSDNHDLCFrameIndex | 1.3.6.1.4.1.2637.2.2.2210.1.1 | INTEGER | read-only | Index of this message |
| INT iSDNHDLCFrameLength | 1.3.6.1.4.1.2637.2.2.2210.1.6 | INTEGER | read-only | length of HDLC frame |
| INT iSDNHDLCFrameMaxIndex | 1.3.6.1.4.1.2637.2.2.2210.1.3 | INTEGER | read-only | last saved log |
| OCT iSDNHDLCFrameMessage | 1.3.6.1.4.1.2637.2.2.2210.1.7 | OCTET STRING | read-only | contents of HDLC frame |
| INT iSDNHDLCFrameNextIndex | 1.3.6.1.4.1.2637.2.2.2210.1.2 | INTEGER | read-only | next available log |
| iSDNHDLCFrameTable | 1.3.6.1.4.1.2637.2.2.2210 | not-accessible | ISDN HDLC Frame Information. | |
| INT iSDNHDLCFrameTimestamp | 1.3.6.1.4.1.2637.2.2.2210.1.4 | INTEGER | read-only | timestamp |
| iSDNLayer2StatsEntry | 1.3.6.1.4.1.2637.2.2.2209.1 | not-accessible | This is the structure of entries in the iSDNLayer2StatsTable. | |
| INT iSDNLayer2StatsLapdPeerSabme | 1.3.6.1.4.1.2637.2.2.2209.1.1 | INTEGER | read-only | Number of SABME frames received on this interface |
| INT iSDNLayer2StatsLapdRcvdFrmr | 1.3.6.1.4.1.2637.2.2.2209.1.2 | INTEGER | read-only | Number of FRMR response frames received. (Indicates number of framing errors on this interface) |
| INT iSDNLayer2StatsLapdState | 1.3.6.1.4.1.2637.2.2.2209.1.3 | INTEGER | read-only | Current state of the ISDN LAPD link |
| iSDNLayer2StatsTable | 1.3.6.1.4.1.2637.2.2.2209 | not-accessible | ISDN Layer-2 Stats Information. | |
| INT iSDNStatsChargedUnits | 1.3.6.1.4.1.2637.2.2.2208.1.5 | INTEGER | read-only | Number of calls charged to this line (outgoing calls, plus reverse-billed incoming calls) |
| iSDNStatsEntry | 1.3.6.1.4.1.2637.2.2.2208.1 | not-accessible | This is the structure of entries in the iSDNStatsTable. | |
| INT iSDNStatsInCalls | 1.3.6.1.4.1.2637.2.2.2208.1.1 | INTEGER | read-only | Number of attempted incoming calls |
| INT iSDNStatsInConnected | 1.3.6.1.4.1.2637.2.2.2208.1.2 | INTEGER | read-only | Number of completed incoming calls |
| INT iSDNStatsOutCalls | 1.3.6.1.4.1.2637.2.2.2208.1.3 | INTEGER | read-only | Number of attempted outgoing calls |
| INT iSDNStatsOutConnected | 1.3.6.1.4.1.2637.2.2.2208.1.4 | INTEGER | read-only | Number of completed outgoing calls |
| iSDNStatsTable | 1.3.6.1.4.1.2637.2.2.2208 | not-accessible | ISDN Stats Information. | |
| l2FLinkStatusEntry | 1.3.6.1.4.1.2637.2.2.1353.1 | not-accessible | This is the structure of entries in the l2FLinkStatusTable. | |
| INT l2FLinkStatusIndex | 1.3.6.1.4.1.2637.2.2.1353.1.2 | INTEGER | read-only | Index of this link in the tunnel |
| INT l2FLinkStatusL2FTermationCause | 1.3.6.1.4.1.2637.2.2.1353.1.31 | INTEGER | read-only | L2F termination cause |
| INT l2FLinkStatusLocalCLID | 1.3.6.1.4.1.2637.2.2.1353.1.1 | INTEGER | read-only | Local CLID for this tunnel |
| INT l2FLinkStatusMIDValue | 1.3.6.1.4.1.2637.2.2.1353.1.11 | INTEGER | read-only | MID value for this link |
| INT l2FLinkStatusRxBytes | 1.3.6.1.4.1.2637.2.2.1353.1.24 | INTEGER | read-only | Number of bytes received from remote user |
| INT l2FLinkStatusRxPackets | 1.3.6.1.4.1.2637.2.2.1353.1.23 | INTEGER | read-only | Number of packets received from remote user |
| INT l2FLinkStatusSessionID | 1.3.6.1.4.1.2637.2.2.1353.1.3 | INTEGER | read-only | System session ID for this link |
| INT l2FLinkStatusState | 1.3.6.1.4.1.2637.2.2.1353.1.12 | INTEGER | read-only | Current state of this link |
| l2FLinkStatusTable | 1.3.6.1.4.1.2637.2.2.1353 | not-accessible | Layer-2 Forwarding Link Status. | |
| INT l2FLinkStatusTxBytes | 1.3.6.1.4.1.2637.2.2.1353.1.22 | INTEGER | read-only | Number of bytes transmitted to remote user |
| INT l2FLinkStatusTxPackets | 1.3.6.1.4.1.2637.2.2.1353.1.21 | INTEGER | read-only | Number of packets transmitted to remote user |
| INT l2FLinkStatusUpTime | 1.3.6.1.4.1.2637.2.2.1353.1.13 | INTEGER | read-only | Time this link has been active |
| STR l2FLinkStatusUserName | 1.3.6.1.4.1.2637.2.2.1353.1.14 | DisplayString | read-only | Remote user name |
| INT l2FLinkStatusVPOP | 1.3.6.1.4.1.2637.2.2.1353.1.4 | INTEGER | read-only | VPOP of first link added to this tunnel |
| l2FLogEntryEntry | 1.3.6.1.4.1.2637.2.2.1354.1 | not-accessible | This is the structure of entries in the l2FLogEntryTable. | |
| OCT l2FLogEntryEntryText | 1.3.6.1.4.1.2637.2.2.1354.1.21 | OCTET STRING | read-only | Log entry text. |
| INT l2FLogEntryIndex | 1.3.6.1.4.1.2637.2.2.1354.1.2 | INTEGER | read-only | Log entry index |
| INT l2FLogEntryLocalCLID | 1.3.6.1.4.1.2637.2.2.1354.1.1 | INTEGER | read-only | Local CLID for this tunnel |
| INT l2FLogEntryMaxIndex | 1.3.6.1.4.1.2637.2.2.1354.1.12 | INTEGER | read-only | Index of newest event available |
| INT l2FLogEntryMinIndex | 1.3.6.1.4.1.2637.2.2.1354.1.11 | INTEGER | read-only | Index of oldest event available |
| l2FLogEntryTable | 1.3.6.1.4.1.2637.2.2.1354 | not-accessible | Layer-2 Forwarding Log Entry Information. | |
| INT l2FLogEntryUpTime | 1.3.6.1.4.1.2637.2.2.1354.1.13 | INTEGER | read-only | Time this tunnel has been active |
| INT l2FTunnelStatusActiveActiveLinks | 1.3.6.1.4.1.2637.2.2.1351.1.7 | INTEGER | read-only | Current number of active links |
| l2FTunnelStatusActiveEntry | 1.3.6.1.4.1.2637.2.2.1351.1 | not-accessible | This is the structure of entries in the l2FTunnelStatusActiveTable. | |
| BOO l2FTunnelStatusActiveGotOpened | 1.3.6.1.4.1.2637.2.2.1351.1.14 | Boolean | read-only | Specifies whether tunnel was opened successfully |
| INT l2FTunnelStatusActiveL2FTermationCause | 1.3.6.1.4.1.2637.2.2.1351.1.16 | INTEGER | read-only | L2F termination cause |
| INT l2FTunnelStatusActiveLinksAdded | 1.3.6.1.4.1.2637.2.2.1351.1.10 | INTEGER | read-only | Total number of links added to this tunnel |
| INT l2FTunnelStatusActiveLinksAddedSuccessfully | 1.3.6.1.4.1.2637.2.2.1351.1.11 | INTEGER | read-only | Total number of links added successfully |
| INT l2FTunnelStatusActiveLinksAddedUnsuccessfully | 1.3.6.1.4.1.2637.2.2.1351.1.12 | INTEGER | read-only | Total number of links added unsuccessfully |
| INT l2FTunnelStatusActiveLinksRemoved | 1.3.6.1.4.1.2637.2.2.1351.1.13 | INTEGER | read-only | Total number of links removed |
| IP l2FTunnelStatusActiveLocalAddress | 1.3.6.1.4.1.2637.2.2.1351.1.3 | IpAddress | read-only | IP address used by CVX |
| INT l2FTunnelStatusActiveLocalCLID | 1.3.6.1.4.1.2637.2.2.1351.1.1 | INTEGER | read-only | Local CLID for this tunnel |
| INT l2FTunnelStatusActiveMaxActiveLinks | 1.3.6.1.4.1.2637.2.2.1351.1.8 | INTEGER | read-only | Highest number of links |
| INT l2FTunnelStatusActivePendingLinks | 1.3.6.1.4.1.2637.2.2.1351.1.9 | INTEGER | read-only | Current number of pending links |
| IP l2FTunnelStatusActiveRemoteAddress | 1.3.6.1.4.1.2637.2.2.1351.1.4 | IpAddress | read-only | IP address of home gateway |
| INT l2FTunnelStatusActiveRemoteCLID | 1.3.6.1.4.1.2637.2.2.1351.1.2 | INTEGER | read-only | Remote CLID for this tunnel (0 = not known yet) |
| INT l2FTunnelStatusActiveState | 1.3.6.1.4.1.2637.2.2.1351.1.5 | INTEGER | read-only | Current state of this tunnel |
| l2FTunnelStatusActiveTable | 1.3.6.1.4.1.2637.2.2.1351 | not-accessible | Layer-2 Forwarding Active Tunnel Status. | |
| INT l2FTunnelStatusActiveUpTime | 1.3.6.1.4.1.2637.2.2.1351.1.6 | INTEGER | read-only | Time this tunnel has been active |
| INT l2FTunnelStatusActiveVPOP | 1.3.6.1.4.1.2637.2.2.1351.1.15 | INTEGER | read-only | VPOP of first link added to this tunnel |
| INT l2FTunnelStatusInactiveActiveLinks | 1.3.6.1.4.1.2637.2.2.1352.1.7 | INTEGER | read-only | Current number of active links |
| l2FTunnelStatusInactiveEntry | 1.3.6.1.4.1.2637.2.2.1352.1 | not-accessible | This is the structure of entries in the l2FTunnelStatusInactiveTable. | |
| BOO l2FTunnelStatusInactiveGotOpened | 1.3.6.1.4.1.2637.2.2.1352.1.14 | Boolean | read-only | Specifies whether tunnel was opened successfully |
| INT l2FTunnelStatusInactiveL2FTermationCause | 1.3.6.1.4.1.2637.2.2.1352.1.16 | INTEGER | read-only | L2F termination cause |
| INT l2FTunnelStatusInactiveLinksAdded | 1.3.6.1.4.1.2637.2.2.1352.1.10 | INTEGER | read-only | Total number of links added to this tunnel |
| INT l2FTunnelStatusInactiveLinksAddedSuccessfully | 1.3.6.1.4.1.2637.2.2.1352.1.11 | INTEGER | read-only | Total number of links added successfully |
| INT l2FTunnelStatusInactiveLinksAddedUnsuccessfully | 1.3.6.1.4.1.2637.2.2.1352.1.12 | INTEGER | read-only | Total number of links added unsuccessfully |
| INT l2FTunnelStatusInactiveLinksRemoved | 1.3.6.1.4.1.2637.2.2.1352.1.13 | INTEGER | read-only | Total number of links removed |
| IP l2FTunnelStatusInactiveLocalAddress | 1.3.6.1.4.1.2637.2.2.1352.1.3 | IpAddress | read-only | IP address used by CVX |
| INT l2FTunnelStatusInactiveLocalCLID | 1.3.6.1.4.1.2637.2.2.1352.1.1 | INTEGER | read-only | Local CLID for this tunnel |
| INT l2FTunnelStatusInactiveMaxActiveLinks | 1.3.6.1.4.1.2637.2.2.1352.1.8 | INTEGER | read-only | Highest number of links |
| INT l2FTunnelStatusInactivePendingLinks | 1.3.6.1.4.1.2637.2.2.1352.1.9 | INTEGER | read-only | Current number of pending links |
| IP l2FTunnelStatusInactiveRemoteAddress | 1.3.6.1.4.1.2637.2.2.1352.1.4 | IpAddress | read-only | IP address of home gateway |
| INT l2FTunnelStatusInactiveRemoteCLID | 1.3.6.1.4.1.2637.2.2.1352.1.2 | INTEGER | read-only | Remote CLID for this tunnel (0 = not known yet) |
| INT l2FTunnelStatusInactiveState | 1.3.6.1.4.1.2637.2.2.1352.1.5 | INTEGER | read-only | Current state of this tunnel |
| l2FTunnelStatusInactiveTable | 1.3.6.1.4.1.2637.2.2.1352 | not-accessible | Layer-2 Forwarding Inactive Tunnel Status. | |
| INT l2FTunnelStatusInactiveUpTime | 1.3.6.1.4.1.2637.2.2.1352.1.6 | INTEGER | read-only | Time this tunnel has been active |
| INT l2FTunnelStatusInactiveVPOP | 1.3.6.1.4.1.2637.2.2.1352.1.15 | INTEGER | read-only | VPOP of first link added to this tunnel |
| l2TPLinkStatusEntry | 1.3.6.1.4.1.2637.2.2.1509.1 | not-accessible | This is the structure of entries in the l2TPLinkStatusTable. | |
| INT l2TPLinkStatusIndex | 1.3.6.1.4.1.2637.2.2.1509.1.3 | INTEGER | read-only | Index of this link in the tunnel |
| INT l2TPLinkStatusL2TPTermationCause | 1.3.6.1.4.1.2637.2.2.1509.1.31 | INTEGER | read-only | L2TP termination cause |
| INT l2TPLinkStatusLocalID | 1.3.6.1.4.1.2637.2.2.1509.1.1 | INTEGER | read-only | Local ID for this link |
| INT l2TPLinkStatusRemoteID | 1.3.6.1.4.1.2637.2.2.1509.1.2 | INTEGER | read-only | Local ID for this link |
| INT l2TPLinkStatusRxBytes | 1.3.6.1.4.1.2637.2.2.1509.1.24 | INTEGER | read-only | Number of bytes received from remote user |
| INT l2TPLinkStatusRxPackets | 1.3.6.1.4.1.2637.2.2.1509.1.23 | INTEGER | read-only | Number of packets received from remote user |
| INT l2TPLinkStatusSessionID | 1.3.6.1.4.1.2637.2.2.1509.1.4 | INTEGER | read-only | System session ID for this link |
| INT l2TPLinkStatusState | 1.3.6.1.4.1.2637.2.2.1509.1.11 | INTEGER | read-only | Current state of this link |
| l2TPLinkStatusTable | 1.3.6.1.4.1.2637.2.2.1509 | not-accessible | Layer-2 Tunneling Protocol Link Status. | |
| INT l2TPLinkStatusTxBytes | 1.3.6.1.4.1.2637.2.2.1509.1.22 | INTEGER | read-only | Number of bytes transmitted to remote user |
| INT l2TPLinkStatusTxPackets | 1.3.6.1.4.1.2637.2.2.1509.1.21 | INTEGER | read-only | Number of packets transmitted to remote user |
| INT l2TPLinkStatusUpTime | 1.3.6.1.4.1.2637.2.2.1509.1.12 | INTEGER | read-only | Time this link has been active |
| STR l2TPLinkStatusUserName | 1.3.6.1.4.1.2637.2.2.1509.1.13 | DisplayString | read-only | Remote user name |
| INT l2TPLinkStatusVPOP | 1.3.6.1.4.1.2637.2.2.1509.1.5 | INTEGER | read-only | VPOP of first link added to this tunnel |
| l2TPLogEntryEntry | 1.3.6.1.4.1.2637.2.2.1510.1 | not-accessible | This is the structure of entries in the l2TPLogEntryTable. | |
| OCT l2TPLogEntryEntryText | 1.3.6.1.4.1.2637.2.2.1510.1.21 | OCTET STRING | read-only | Log entry text. |
| INT l2TPLogEntryIndex | 1.3.6.1.4.1.2637.2.2.1510.1.2 | INTEGER | read-only | Log entry index |
| INT l2TPLogEntryLocalID | 1.3.6.1.4.1.2637.2.2.1510.1.1 | INTEGER | read-only | Local ID for this tunnel |
| INT l2TPLogEntryMaxIndex | 1.3.6.1.4.1.2637.2.2.1510.1.12 | INTEGER | read-only | Index of newest event available |
| INT l2TPLogEntryMinIndex | 1.3.6.1.4.1.2637.2.2.1510.1.11 | INTEGER | read-only | Index of oldest event available |
| l2TPLogEntryTable | 1.3.6.1.4.1.2637.2.2.1510 | not-accessible | Layer-2 Tunneling Protocol Log Entry Information. | |
| INT l2TPLogEntryUpTime | 1.3.6.1.4.1.2637.2.2.1510.1.13 | INTEGER | read-only | Time this tunnel has been active |
| INT l2TPTunnelStatusActiveActiveLinks | 1.3.6.1.4.1.2637.2.2.1507.1.8 | INTEGER | read-only | Current number of active links |
| l2TPTunnelStatusActiveEntry | 1.3.6.1.4.1.2637.2.2.1507.1 | not-accessible | This is the structure of entries in the l2TPTunnelStatusActiveTable. | |
| BOO l2TPTunnelStatusActiveGotOpened | 1.3.6.1.4.1.2637.2.2.1507.1.15 | Boolean | read-only | Specifies whether tunnel was opened successfully |
| INT l2TPTunnelStatusActiveL2TPTermationCause | 1.3.6.1.4.1.2637.2.2.1507.1.17 | INTEGER | read-only | L2TP termination cause |
| INT l2TPTunnelStatusActiveLinksAdded | 1.3.6.1.4.1.2637.2.2.1507.1.11 | INTEGER | read-only | Total number of links added to this tunnel |
| INT l2TPTunnelStatusActiveLinksAddedSuccessfully | 1.3.6.1.4.1.2637.2.2.1507.1.12 | INTEGER | read-only | Total number of links added successfully |
| INT l2TPTunnelStatusActiveLinksAddedUnsuccessfully | 1.3.6.1.4.1.2637.2.2.1507.1.13 | INTEGER | read-only | Total number of links added unsuccessfully |
| INT l2TPTunnelStatusActiveLinksRemoved | 1.3.6.1.4.1.2637.2.2.1507.1.14 | INTEGER | read-only | Total number of links removed |
| IP l2TPTunnelStatusActiveLocalAddress | 1.3.6.1.4.1.2637.2.2.1507.1.4 | IpAddress | read-only | IP address used by CVX |
| INT l2TPTunnelStatusActiveLocalID | 1.3.6.1.4.1.2637.2.2.1507.1.2 | INTEGER | read-only | Local ID for this tunnel |
| INT l2TPTunnelStatusActiveMaxActiveLinks | 1.3.6.1.4.1.2637.2.2.1507.1.9 | INTEGER | read-only | Highest number of links |
| INT l2TPTunnelStatusActivePendingLinks | 1.3.6.1.4.1.2637.2.2.1507.1.10 | INTEGER | read-only | Current number of pending links |
| IP l2TPTunnelStatusActiveRemoteAddress | 1.3.6.1.4.1.2637.2.2.1507.1.5 | IpAddress | read-only | IP address of LNS |
| INT l2TPTunnelStatusActiveRemoteID | 1.3.6.1.4.1.2637.2.2.1507.1.3 | INTEGER | read-only | Remote ID for this tunnel (0 = not known yet) |
| INT l2TPTunnelStatusActiveSlot | 1.3.6.1.4.1.2637.2.2.1507.1.1 | INTEGER | read-only | Slot on which tunnel is terminated |
| INT l2TPTunnelStatusActiveState | 1.3.6.1.4.1.2637.2.2.1507.1.6 | INTEGER | read-only | Current state of this tunnel |
| l2TPTunnelStatusActiveTable | 1.3.6.1.4.1.2637.2.2.1507 | not-accessible | Layer-2 Tunneling Protocol Active Tunnel Status. | |
| INT l2TPTunnelStatusActiveUpTime | 1.3.6.1.4.1.2637.2.2.1507.1.7 | INTEGER | read-only | Time this tunnel has been active |
| INT l2TPTunnelStatusActiveVPOP | 1.3.6.1.4.1.2637.2.2.1507.1.16 | INTEGER | read-only | VPOP of first link added to this tunnel |
| INT l2TPTunnelStatusInactiveActiveLinks | 1.3.6.1.4.1.2637.2.2.1508.1.8 | INTEGER | read-only | Current number of active links |
| l2TPTunnelStatusInactiveEntry | 1.3.6.1.4.1.2637.2.2.1508.1 | not-accessible | This is the structure of entries in the l2TPTunnelStatusInactiveTable. | |
| BOO l2TPTunnelStatusInactiveGotOpened | 1.3.6.1.4.1.2637.2.2.1508.1.15 | Boolean | read-only | Specifies whether tunnel was opened successfully |
| INT l2TPTunnelStatusInactiveL2TPTermationCause | 1.3.6.1.4.1.2637.2.2.1508.1.17 | INTEGER | read-only | L2TP termination cause |
| INT l2TPTunnelStatusInactiveLinksAdded | 1.3.6.1.4.1.2637.2.2.1508.1.11 | INTEGER | read-only | Total number of links added to this tunnel |
| INT l2TPTunnelStatusInactiveLinksAddedSuccessfully | 1.3.6.1.4.1.2637.2.2.1508.1.12 | INTEGER | read-only | Total number of links added successfully |
| INT l2TPTunnelStatusInactiveLinksAddedUnsuccessfully | 1.3.6.1.4.1.2637.2.2.1508.1.13 | INTEGER | read-only | Total number of links added unsuccessfully |
| INT l2TPTunnelStatusInactiveLinksRemoved | 1.3.6.1.4.1.2637.2.2.1508.1.14 | INTEGER | read-only | Total number of links removed |
| IP l2TPTunnelStatusInactiveLocalAddress | 1.3.6.1.4.1.2637.2.2.1508.1.4 | IpAddress | read-only | IP address used by CVX |
| INT l2TPTunnelStatusInactiveLocalID | 1.3.6.1.4.1.2637.2.2.1508.1.2 | INTEGER | read-only | Local ID for this tunnel |
| INT l2TPTunnelStatusInactiveMaxActiveLinks | 1.3.6.1.4.1.2637.2.2.1508.1.9 | INTEGER | read-only | Highest number of links |
| INT l2TPTunnelStatusInactivePendingLinks | 1.3.6.1.4.1.2637.2.2.1508.1.10 | INTEGER | read-only | Current number of pending links |
| IP l2TPTunnelStatusInactiveRemoteAddress | 1.3.6.1.4.1.2637.2.2.1508.1.5 | IpAddress | read-only | IP address of LNS |
| INT l2TPTunnelStatusInactiveRemoteID | 1.3.6.1.4.1.2637.2.2.1508.1.3 | INTEGER | read-only | Remote ID for this tunnel (0 = not known yet) |
| INT l2TPTunnelStatusInactiveSlot | 1.3.6.1.4.1.2637.2.2.1508.1.1 | INTEGER | read-only | Slot on which tunnel is terminated |
| INT l2TPTunnelStatusInactiveState | 1.3.6.1.4.1.2637.2.2.1508.1.6 | INTEGER | read-only | Current state of this tunnel |
| l2TPTunnelStatusInactiveTable | 1.3.6.1.4.1.2637.2.2.1508 | not-accessible | Layer-2 Tunneling Protocol Inactive Tunnel Status. | |
| INT l2TPTunnelStatusInactiveUpTime | 1.3.6.1.4.1.2637.2.2.1508.1.7 | INTEGER | read-only | Time this tunnel has been active |
| INT l2TPTunnelStatusInactiveVPOP | 1.3.6.1.4.1.2637.2.2.1508.1.16 | INTEGER | read-only | VPOP of first link added to this tunnel |
| mamLogEntryEntry | 1.3.6.1.4.1.2637.2.2.1402.1 | not-accessible | This is the structure of entries in the mamLogEntryTable. | |
| OCT mamLogEntryEntryText | 1.3.6.1.4.1.2637.2.2.1402.1.4 | OCTET STRING | read-only | Log entry text. |
| INT mamLogEntryIndex | 1.3.6.1.4.1.2637.2.2.1402.1.1 | INTEGER | read-only | Log entry index |
| INT mamLogEntryMaxIndex | 1.3.6.1.4.1.2637.2.2.1402.1.3 | INTEGER | read-only | Index of newest event available |
| INT mamLogEntryMinIndex | 1.3.6.1.4.1.2637.2.2.1402.1.2 | INTEGER | read-only | Index of oldest event available |
| mamLogEntryTable | 1.3.6.1.4.1.2637.2.2.1402 | not-accessible | MAM Log Table. | |
| INT memoryStatsTableAllocFails | 1.3.6.1.4.1.2637.2.2.3605.1.402 | INTEGER | read-only | Number of failed allocations |
| INT memoryStatsTableAllocSuccesses | 1.3.6.1.4.1.2637.2.2.3605.1.401 | INTEGER | read-only | Number of successful allocations |
| INT memoryStatsTableCardType | 1.3.6.1.4.1.2637.2.2.3605.1.2 | INTEGER | read-only | Type of card reporting timer information |
| INT memoryStatsTableCPUNumber | 1.3.6.1.4.1.2637.2.2.3605.1.3 | INTEGER | read-only | CPU number (0 = main CPU, 1..n = IOP) |
| memoryStatsTableEntry | 1.3.6.1.4.1.2637.2.2.3605.1 | not-accessible | This is the structure of entries in the memoryStatsTableTable. | |
| INT memoryStatsTableFreeBlockCount | 1.3.6.1.4.1.2637.2.2.3605.1.202 | INTEGER | read-only | Size of largest free block |
| INT memoryStatsTableFreeFails | 1.3.6.1.4.1.2637.2.2.3605.1.404 | INTEGER | read-only | Number of failed frees |
| INT memoryStatsTableFreeLargestBlock | 1.3.6.1.4.1.2637.2.2.3605.1.203 | INTEGER | read-only | Size of largest free block |
| INT memoryStatsTableFreeSize | 1.3.6.1.4.1.2637.2.2.3605.1.201 | INTEGER | read-only | Amount of free memory |
| INT memoryStatsTableFreeSmallestBlock | 1.3.6.1.4.1.2637.2.2.3605.1.204 | INTEGER | read-only | Size of smallest free block |
| INT memoryStatsTableFreeSuccesses | 1.3.6.1.4.1.2637.2.2.3605.1.403 | INTEGER | read-only | Number of successful frees |
| INT memoryStatsTableManagedSize | 1.3.6.1.4.1.2637.2.2.3605.1.102 | INTEGER | read-only | Amount of memory given to memory allocation system |
| INT memoryStatsTableSlotNumber | 1.3.6.1.4.1.2637.2.2.3605.1.1 | INTEGER | read-only | Slot number |
| memoryStatsTableTable | 1.3.6.1.4.1.2637.2.2.3605 | not-accessible | memory stats table | |
| INT memoryStatsTableTotalSize | 1.3.6.1.4.1.2637.2.2.3605.1.101 | INTEGER | read-only | Total amount of memory available to CPU |
| INT memoryStatsTableUsedBlockCount | 1.3.6.1.4.1.2637.2.2.3605.1.302 | INTEGER | read-only | Size of largest used block |
| INT memoryStatsTableUsedLargestBlock | 1.3.6.1.4.1.2637.2.2.3605.1.303 | INTEGER | read-only | Size of largest used block |
| INT memoryStatsTableUsedSize | 1.3.6.1.4.1.2637.2.2.3605.1.301 | INTEGER | read-only | Amount of used memory |
| INT memoryStatsTableUsedSmallestBlock | 1.3.6.1.4.1.2637.2.2.3605.1.304 | INTEGER | read-only | Size of smallest used block |
| STR modemCallStatsAbortCode | 1.3.6.1.4.1.2637.2.2.1423.1.93 | DisplayString | read-only | Abort code. |
| STR modemCallStatsAutoGainAmplitude | 1.3.6.1.4.1.2637.2.2.1423.1.70 | DisplayString | read-only | Auto gain amplitude. |
| STR modemCallStatsAutoGainAttenuation | 1.3.6.1.4.1.2637.2.2.1423.1.71 | DisplayString | read-only | Auto gain attenuation. |
| INT modemCallStatsConnectTimeHours | 1.3.6.1.4.1.2637.2.2.1423.1.67 | INTEGER | read-only | Connection time, hours. |
| INT modemCallStatsConnectTimeMinutes | 1.3.6.1.4.1.2637.2.2.1423.1.68 | INTEGER | read-only | Connection time, minutes. |
| INT modemCallStatsConnectTimeSeconds | 1.3.6.1.4.1.2637.2.2.1423.1.69 | INTEGER | read-only | Connection time, seconds. |
| INT modemCallStatsDataIsValid | 1.3.6.1.4.1.2637.2.2.1423.1.201 | INTEGER | read-only | Non-zero if data is valid; zero if data is not valid. |
| STR modemCallStatsDCProtocol | 1.3.6.1.4.1.2637.2.2.1423.1.10 | DisplayString | read-only | Data Compression protocol negotiated. |
| STR modemCallStatsDigitalPadDetected | 1.3.6.1.4.1.2637.2.2.1423.1.72 | DisplayString | read-only | Digital pad detected. |
| STR modemCallStatsDisconnectReason | 1.3.6.1.4.1.2637.2.2.1423.1.91 | DisplayString | read-only | Disconnect reason. |
| STR modemCallStatsECProtocol | 1.3.6.1.4.1.2637.2.2.1423.1.9 | DisplayString | read-only | Error-correction protocol negotiated. |
| INT modemCallStatsECState1 | 1.3.6.1.4.1.2637.2.2.1423.1.107 | INTEGER | read-only | EC state 1. |
| INT modemCallStatsECState2 | 1.3.6.1.4.1.2637.2.2.1423.1.108 | INTEGER | read-only | EC state 2. |
| modemCallStatsEntry | 1.3.6.1.4.1.2637.2.2.1423.1 | not-accessible | This is the structure of entries in the modemCallStatsTable. | |
| INT modemCallStatsEQM10Seconds | 1.3.6.1.4.1.2637.2.2.1423.1.37 | INTEGER | read-only | EQM 10 seconds before &v2 issued or hangup. |
| INT modemCallStatsEQM1Second | 1.3.6.1.4.1.2637.2.2.1423.1.28 | INTEGER | read-only | EQM 1 second before &v2 issued or hangup. |
| INT modemCallStatsEQM2Seconds | 1.3.6.1.4.1.2637.2.2.1423.1.29 | INTEGER | read-only | EQM 2 seconds before &v2 issued or hangup. |
| INT modemCallStatsEQM3Seconds | 1.3.6.1.4.1.2637.2.2.1423.1.30 | INTEGER | read-only | EQM 3 seconds before &v2 issued or hangup. |
| INT modemCallStatsEQM4Seconds | 1.3.6.1.4.1.2637.2.2.1423.1.31 | INTEGER | read-only | EQM 4 seconds before &v2 issued or hangup. |
| INT modemCallStatsEQM5Seconds | 1.3.6.1.4.1.2637.2.2.1423.1.32 | INTEGER | read-only | EQM 5 seconds before &v2 issued or hangup. |
| INT modemCallStatsEQM6Seconds | 1.3.6.1.4.1.2637.2.2.1423.1.33 | INTEGER | read-only | EQM 6 seconds before &v2 issued or hangup. |
| INT modemCallStatsEQM7Seconds | 1.3.6.1.4.1.2637.2.2.1423.1.34 | INTEGER | read-only | EQM 7 seconds before &v2 issued or hangup. |
| INT modemCallStatsEQM8Seconds | 1.3.6.1.4.1.2637.2.2.1423.1.35 | INTEGER | read-only | EQM 8 seconds before &v2 issued or hangup. |
| INT modemCallStatsEQM9Seconds | 1.3.6.1.4.1.2637.2.2.1423.1.36 | INTEGER | read-only | EQM 9 seconds before &v2 issued or hangup. |
| INT modemCallStatsEQMHits | 1.3.6.1.4.1.2637.2.2.1423.1.24 | INTEGER | read-only | Number of times EQM values became larger than 127. |
| INT modemCallStatsEQMSumHigh | 1.3.6.1.4.1.2637.2.2.1423.1.27 | INTEGER | read-only | High order byte of the EQM sum. |
| INT modemCallStatsEQMSumLow | 1.3.6.1.4.1.2637.2.2.1423.1.25 | INTEGER | read-only | Low order byte of the EQM sum. |
| INT modemCallStatsEQMSumMiddle | 1.3.6.1.4.1.2637.2.2.1423.1.26 | INTEGER | read-only | Middle order bytes of the EQM sum. |
| INT modemCallStatsFirmwareState | 1.3.6.1.4.1.2637.2.2.1423.1.109 | INTEGER | read-only | Firmware state. |
| INT modemCallStatsHandshakeTime | 1.3.6.1.4.1.2637.2.2.1423.1.105 | INTEGER | read-only | Handshake time. |
| INT modemCallStatsHighAddrOfMEMACCFailure | 1.3.6.1.4.1.2637.2.2.1423.1.110 | INTEGER | read-only | Memory address, high byte. |
| INT modemCallStatsHighestRxState | 1.3.6.1.4.1.2637.2.2.1423.1.64 | INTEGER | read-only | Highest receive state. |
| INT modemCallStatsHighestTxState | 1.3.6.1.4.1.2637.2.2.1423.1.63 | INTEGER | read-only | Highest transmit state. |
| INT modemCallStatsInfo0SequenceHigh | 1.3.6.1.4.1.2637.2.2.1423.1.57 | INTEGER | read-only | Info 0 sequence, high byte. |
| INT modemCallStatsInfo0SequenceLow | 1.3.6.1.4.1.2637.2.2.1423.1.58 | INTEGER | read-only | Info 0 sequence, low byte. |
| STR modemCallStatsInitialModulationType | 1.3.6.1.4.1.2637.2.2.1423.1.12 | DisplayString | read-only | Initial Modulation protocol. |
| STR modemCallStatsK56Status | 1.3.6.1.4.1.2637.2.2.1423.1.94 | DisplayString | read-only | K56flex status. |
| STR modemCallStatsLastAGCGainValue | 1.3.6.1.4.1.2637.2.2.1423.1.16 | DisplayString | read-only | Last AGC gain value. |
| INT modemCallStatsLastEQMValue | 1.3.6.1.4.1.2637.2.2.1423.1.21 | INTEGER | read-only | Last EQM value. |
| INT modemCallStatsLastReceiveState | 1.3.6.1.4.1.2637.2.2.1423.1.66 | INTEGER | read-only | Last receive state. |
| INT modemCallStatsLastTransmitState | 1.3.6.1.4.1.2637.2.2.1423.1.65 | INTEGER | read-only | Last transmit state. |
| INT modemCallStatsLocalRateRenegs | 1.3.6.1.4.1.2637.2.2.1423.1.43 | INTEGER | read-only | Number of local rate renegotiations. |
| INT modemCallStatsLocalRetrains | 1.3.6.1.4.1.2637.2.2.1423.1.41 | INTEGER | read-only | Number of local retrains. |
| INT modemCallStatsLowAddrOfMEMACCFailure | 1.3.6.1.4.1.2637.2.2.1423.1.111 | INTEGER | read-only | Low address of MEMACC failure. |
| STR modemCallStatsLowerBandEdge | 1.3.6.1.4.1.2637.2.2.1423.1.54 | DisplayString | read-only | Lower band edge. |
| STR modemCallStatsMaxAGCGainValue | 1.3.6.1.4.1.2637.2.2.1423.1.18 | DisplayString | read-only | Maximum AGC gain value. |
| INT modemCallStatsMaxEQMValue | 1.3.6.1.4.1.2637.2.2.1423.1.23 | INTEGER | read-only | Maximum EQM value. |
| INT modemCallStatsMaxSNRValue | 1.3.6.1.4.1.2637.2.2.1423.1.40 | INTEGER | read-only | Maximum SNR value. |
| INT modemCallStatsMaxTxRetransmissions | 1.3.6.1.4.1.2637.2.2.1423.1.75 | INTEGER | read-only | Max number of retransmissions for one frame. |
| STR modemCallStatsMinAGCGainValue | 1.3.6.1.4.1.2637.2.2.1423.1.17 | DisplayString | read-only | Minimum AGC gain value. |
| INT modemCallStatsMinEQMValue | 1.3.6.1.4.1.2637.2.2.1423.1.22 | INTEGER | read-only | Minimum EQM value. |
| INT modemCallStatsMinSNRValue | 1.3.6.1.4.1.2637.2.2.1423.1.39 | INTEGER | read-only | Minimum SNR value. |
| INT modemCallStatsMinutesSinceRetrain | 1.3.6.1.4.1.2637.2.2.1423.1.112 | INTEGER | read-only | Number of minutes since last retrain or rate renogiation. |
| INT modemCallStatsModemIndex | 1.3.6.1.4.1.2637.2.2.1423.1.204 | INTEGER | read-only | The modem number associated with these call statistics. |
| STR modemCallStatsModulationType | 1.3.6.1.4.1.2637.2.2.1423.1.11 | DisplayString | read-only | Modulation protocol negotiated. |
| INT modemCallStatsNumberOfHandshakeRetries | 1.3.6.1.4.1.2637.2.2.1423.1.106 | INTEGER | read-only | Number of handshake retries. |
| INT modemCallStatsNumberOfLAPMREJSReceived | 1.3.6.1.4.1.2637.2.2.1423.1.77 | INTEGER | read-only | Number of LAPM REJ frames received. |
| INT modemCallStatsNumberOfLAPMREJSTransmitted | 1.3.6.1.4.1.2637.2.2.1423.1.78 | INTEGER | read-only | Number of LAPM REJ frames transmitted. |
| INT modemCallStatsNumberOfRXBlocksHigh | 1.3.6.1.4.1.2637.2.2.1423.1.81 | INTEGER | read-only | Number of RX blocks, high byte. |
| INT modemCallStatsNumberOfRXBlocksLow | 1.3.6.1.4.1.2637.2.2.1423.1.82 | INTEGER | read-only | Number of RX blocks, low byte. |
| INT modemCallStatsNumberOfRXChars2ndByte | 1.3.6.1.4.1.2637.2.2.1423.1.88 | INTEGER | read-only | Number of RX characters, 2nd byte. |
| INT modemCallStatsNumberOfRXChars3rdByte | 1.3.6.1.4.1.2637.2.2.1423.1.89 | INTEGER | read-only | Number of RX characters, 3rd byte. |
| INT modemCallStatsNumberOfRXCharsLSB | 1.3.6.1.4.1.2637.2.2.1423.1.90 | INTEGER | read-only | Number of RX characters, low byte. |
| INT modemCallStatsNumberOfRXCharsMSB | 1.3.6.1.4.1.2637.2.2.1423.1.87 | INTEGER | read-only | Number of RX characters, high byte. |
| INT modemCallStatsNumberOfTXBlocksHigh | 1.3.6.1.4.1.2637.2.2.1423.1.79 | INTEGER | read-only | Number of TX blocks, high byte. |
| INT modemCallStatsNumberOfTXBlocksLow | 1.3.6.1.4.1.2637.2.2.1423.1.80 | INTEGER | read-only | Number of TX blocks, low byte. |
| INT modemCallStatsNumberOfTXChars2ndByte | 1.3.6.1.4.1.2637.2.2.1423.1.84 | INTEGER | read-only | Number of TX characters, 2nd byte. |
| INT modemCallStatsNumberOfTXChars3rdByte | 1.3.6.1.4.1.2637.2.2.1423.1.85 | INTEGER | read-only | Number of TX characters, 3rd byte. |
| INT modemCallStatsNumberOfTXCharsLSB | 1.3.6.1.4.1.2637.2.2.1423.1.86 | INTEGER | read-only | Number of TX characters, low byte. |
| INT modemCallStatsNumberOfTXCharsMSB | 1.3.6.1.4.1.2637.2.2.1423.1.83 | INTEGER | read-only | Number of TX characters, high byte. |
| INT modemCallStatsPreEmphasis | 1.3.6.1.4.1.2637.2.2.1423.1.52 | INTEGER | read-only | Pre-emphasis filter chosen. |
| INT modemCallStatsRBSPattern | 1.3.6.1.4.1.2637.2.2.1423.1.73 | INTEGER | read-only | RBS Pattern. |
| INT modemCallStatsRBSRateDrop | 1.3.6.1.4.1.2637.2.2.1423.1.74 | INTEGER | read-only | Rate drop due to RBS. |
| INT modemCallStatsRemoteRateRenegs | 1.3.6.1.4.1.2637.2.2.1423.1.44 | INTEGER | read-only | Number of remote rate renegotiations. |
| INT modemCallStatsRemoteRetrains | 1.3.6.1.4.1.2637.2.2.1423.1.42 | INTEGER | read-only | Number of remote retrains. |
| STR modemCallStatsRetrainReason | 1.3.6.1.4.1.2637.2.2.1423.1.92 | DisplayString | read-only | Reason for retrain or rate renegotiation. |
| STR modemCallStatsRoundTripTime | 1.3.6.1.4.1.2637.2.2.1423.1.114 | DisplayString | read-only | Round trip time. |
| INT modemCallStatsRTTHigh | 1.3.6.1.4.1.2637.2.2.1423.1.55 | INTEGER | read-only | Round trip delay, high byte. |
| INT modemCallStatsRTTLow | 1.3.6.1.4.1.2637.2.2.1423.1.56 | INTEGER | read-only | Round trip delay, low byte. |
| INT modemCallStatsRxCarrierFrequency | 1.3.6.1.4.1.2637.2.2.1423.1.15 | INTEGER | read-only | Receive carrier frequency. |
| INT modemCallStatsRxFinalSpeed | 1.3.6.1.4.1.2637.2.2.1423.1.6 | INTEGER | read-only | Final receive speed in bits/second. |
| INT modemCallStatsRxInitialSpeed | 1.3.6.1.4.1.2637.2.2.1423.1.5 | INTEGER | read-only | Initial receive speed in bits/second. |
| INT modemCallStatsRxMaxSpeed | 1.3.6.1.4.1.2637.2.2.1423.1.8 | INTEGER | read-only | Maximum receive speed in bits/second. |
| INT modemCallStatsRxMinSpeed | 1.3.6.1.4.1.2637.2.2.1423.1.7 | INTEGER | read-only | Minimum receive speed in bits/second. |
| INT modemCallStatsRxMPSequenceByte1High | 1.3.6.1.4.1.2637.2.2.1423.1.60 | INTEGER | read-only | RX MP sequence byte 1, high byte. |
| INT modemCallStatsRxMPSequenceByte1Low | 1.3.6.1.4.1.2637.2.2.1423.1.59 | INTEGER | read-only | RX MP sequence byte 1, low byte. |
| INT modemCallStatsRxMPSequenceByte2High | 1.3.6.1.4.1.2637.2.2.1423.1.62 | INTEGER | read-only | RX MP sequence byte 2, high byte. |
| INT modemCallStatsRxMPSequenceByte2Low | 1.3.6.1.4.1.2637.2.2.1423.1.61 | INTEGER | read-only | RX MP sequence byte 2, low byte. |
| INT modemCallStatsRxNonlinearEncoding | 1.3.6.1.4.1.2637.2.2.1423.1.46 | INTEGER | read-only | Whether non-linear receive encoding was on. |
| INT modemCallStatsRxPrecoding | 1.3.6.1.4.1.2637.2.2.1423.1.48 | INTEGER | read-only | Whether receive precoding was on. |
| INT modemCallStatsRxShaping | 1.3.6.1.4.1.2637.2.2.1423.1.50 | INTEGER | read-only | Whether receive shaping was on. |
| INT modemCallStatsSessionID | 1.3.6.1.4.1.2637.2.2.1423.1.202 | INTEGER | read-only | Session ID associated with this data. |
| INT modemCallStatsSlotIndex | 1.3.6.1.4.1.2637.2.2.1423.1.203 | INTEGER | read-only | The physical slot number in which this modem resides. |
| STR modemCallStatsSNRRatio | 1.3.6.1.4.1.2637.2.2.1423.1.38 | DisplayString | read-only | SNR ratio. |
| INT modemCallStatsSymbolRate | 1.3.6.1.4.1.2637.2.2.1423.1.13 | INTEGER | read-only | Symbol rate. |
| modemCallStatsTable | 1.3.6.1.4.1.2637.2.2.1423 | not-accessible | Modem call stats table. | |
| INT modemCallStatsTotalTxRetransmissions | 1.3.6.1.4.1.2637.2.2.1423.1.76 | INTEGER | read-only | Total number of retransmissions during connection. |
| STR modemCallStatsTrellisMapping | 1.3.6.1.4.1.2637.2.2.1423.1.51 | DisplayString | read-only | Rrellis mapping type. |
| INT modemCallStatsTxCarrierFrequency | 1.3.6.1.4.1.2637.2.2.1423.1.14 | INTEGER | read-only | Transmit carrier frequency. |
| INT modemCallStatsTxFinalSpeed | 1.3.6.1.4.1.2637.2.2.1423.1.2 | INTEGER | read-only | Final transmit speed in bits/second. |
| INT modemCallStatsTxInitialSpeed | 1.3.6.1.4.1.2637.2.2.1423.1.1 | INTEGER | read-only | Initial transmit speed in bits/second. |
| INT modemCallStatsTxLevel | 1.3.6.1.4.1.2637.2.2.1423.1.19 | INTEGER | read-only | Transmit level in negative dB's. |
| INT modemCallStatsTxLevelReduction | 1.3.6.1.4.1.2637.2.2.1423.1.20 | INTEGER | read-only | Transmit level reduction. |
| INT modemCallStatsTxMaxSpeed | 1.3.6.1.4.1.2637.2.2.1423.1.4 | INTEGER | read-only | Maximum transmit speed in bits/second. |
| INT modemCallStatsTxMinSpeed | 1.3.6.1.4.1.2637.2.2.1423.1.3 | INTEGER | read-only | Minimum transmit speed in bits/second. |
| INT modemCallStatsTxNonlinearEncoding | 1.3.6.1.4.1.2637.2.2.1423.1.45 | INTEGER | read-only | Whether non-linear transmit encoding was on. |
| INT modemCallStatsTxPrecoding | 1.3.6.1.4.1.2637.2.2.1423.1.47 | INTEGER | read-only | Whether transmit precoding was on. |
| INT modemCallStatsTxShaping | 1.3.6.1.4.1.2637.2.2.1423.1.49 | INTEGER | read-only | Whether transmit shaping was on. |
| STR modemCallStatsUpperBandEdge | 1.3.6.1.4.1.2637.2.2.1423.1.53 | DisplayString | read-only | Upper band edge. |
| STR modemCallStatsV8Capabilities | 1.3.6.1.4.1.2637.2.2.1423.1.97 | DisplayString | read-only | Manufacturer's product capabilities (V.8bis octet 15). |
| STR modemCallStatsV8ControllerRev | 1.3.6.1.4.1.2637.2.2.1423.1.100 | DisplayString | read-only | CONEXANT's controller revision (V.8bis octet 18). |
| STR modemCallStatsV8DataPumpRev | 1.3.6.1.4.1.2637.2.2.1423.1.99 | DisplayString | read-only | CONEXANT's data pump revision number (V.8bis octet 17). |
| STR modemCallStatsV8FlexVersion | 1.3.6.1.4.1.2637.2.2.1423.1.98 | DisplayString | read-only | Flex version number (V.8bis octet 16). |
| STR modemCallStatsV8LicenseeCode | 1.3.6.1.4.1.2637.2.2.1423.1.96 | DisplayString | read-only | Licensee code (V.8bis octet 14). |
| STR modemCallStatsV8ManufacturerID | 1.3.6.1.4.1.2637.2.2.1423.1.95 | DisplayString | read-only | Manufacturer id (V.8bis octet 13). |
| STR modemCallStatsV8Progress | 1.3.6.1.4.1.2637.2.2.1423.1.101 | DisplayString | read-only | Progress. |
| INT modemCallStatsV90DigitalPadHigh | 1.3.6.1.4.1.2637.2.2.1423.1.102 | INTEGER | read-only | V.90 Digital pad value, high byte. |
| INT modemCallStatsV90DigitalPadLow | 1.3.6.1.4.1.2637.2.2.1423.1.103 | INTEGER | read-only | V.90 Digital pad value, low byte. |
| INT modemCallStatsV90IMDRatio | 1.3.6.1.4.1.2637.2.2.1423.1.104 | INTEGER | read-only | V.90 IMD ratio. |
| INT modemCallStatsWAStatus | 1.3.6.1.4.1.2637.2.2.1423.1.113 | INTEGER | read-only | WA status. |
| INT modemIntervalStatsActiveCount | 1.3.6.1.4.1.2637.2.2.1425.1.10 | INTEGER | read-only | Total number of modems in the system that are functional and in use |
| INT modemIntervalStatsAuthCalls | 1.3.6.1.4.1.2637.2.2.1425.1.103 | INTEGER | read-only | Total number of calls that have reached the authentication stage in the system. |
| INT modemIntervalStatsConnectedCalls | 1.3.6.1.4.1.2637.2.2.1425.1.102 | INTEGER | read-only | Total number of calls that have connected in the system |
| INT modemIntervalStatsDCCalls | 1.3.6.1.4.1.2637.2.2.1425.1.105 | INTEGER | read-only | Total number of calls that negotiated data compression in the system |
| INT modemIntervalStatsDeadCount | 1.3.6.1.4.1.2637.2.2.1425.1.7 | INTEGER | read-only | Total number of modems in the system that are not responding to commands |
| INT modemIntervalStatsDisabledCount | 1.3.6.1.4.1.2637.2.2.1425.1.5 | INTEGER | read-only | Total number of modems in the system that are disabled by config |
| INT modemIntervalStatsDownloadingCount | 1.3.6.1.4.1.2637.2.2.1425.1.11 | INTEGER | read-only | Total number of modems in the system that are currently being downloaded |
| INT modemIntervalStatsECCalls | 1.3.6.1.4.1.2637.2.2.1425.1.104 | INTEGER | read-only | Total number of calls that negotiated error correction in the system. |
| modemIntervalStatsEntry | 1.3.6.1.4.1.2637.2.2.1425.1 | not-accessible | This is the structure of entries in the modemIntervalStatsTable. | |
| INT modemIntervalStatsIdleCount | 1.3.6.1.4.1.2637.2.2.1425.1.9 | INTEGER | read-only | Total number of modems in the system that are functional, but not in use |
| INT modemIntervalStatsIndex | 1.3.6.1.4.1.2637.2.2.1425.1.1 | INTEGER | read-only | Index of this entry |
| INT modemIntervalStatsK56Calls | 1.3.6.1.4.1.2637.2.2.1425.1.106 | INTEGER | read-only | Total number of calls that have connected with K56 Flex modulation in the system. |
| INT modemIntervalStatsModemCount | 1.3.6.1.4.1.2637.2.2.1425.1.4 | INTEGER | read-only | Total number of modems found in the system |
| INT modemIntervalStatsNoDownloadCount | 1.3.6.1.4.1.2637.2.2.1425.1.6 | INTEGER | read-only | Total number of modems in the system that failed download |
| INT modemIntervalStatsOverallAuthCalls | 1.3.6.1.4.1.2637.2.2.1425.1.203 | INTEGER | read-only | Total number of calls that have reached the authentication stage in the system. |
| INT modemIntervalStatsOverallConnectedCalls | 1.3.6.1.4.1.2637.2.2.1425.1.202 | INTEGER | read-only | Total number of calls that have connected in the system |
| INT modemIntervalStatsOverallTotalCalls | 1.3.6.1.4.1.2637.2.2.1425.1.201 | INTEGER | read-only | The total number of calls assigned to modems in the system |
| INT modemIntervalStatsRemovedCount | 1.3.6.1.4.1.2637.2.2.1425.1.8 | INTEGER | read-only | Total number of modems in the system were taken out of service due to excessive failures |
| INT modemIntervalStatsStartTime | 1.3.6.1.4.1.2637.2.2.1425.1.2 | INTEGER | read-only | Time (in seconds) of start of reporting interval |
| INT modemIntervalStatsStopTime | 1.3.6.1.4.1.2637.2.2.1425.1.3 | INTEGER | read-only | Time (in seconds) of start of reporting interval |
| modemIntervalStatsTable | 1.3.6.1.4.1.2637.2.2.1425 | not-accessible | Modem interval stats table. | |
| INT modemIntervalStatsTotalCalls | 1.3.6.1.4.1.2637.2.2.1425.1.101 | INTEGER | read-only | The total number of calls assigned to modems in the system |
| INT modemIntervalStatsV32Calls | 1.3.6.1.4.1.2637.2.2.1425.1.109 | INTEGER | read-only | Total number of calls that have connected with V.32 or V.32bis modulation in the system. |
| INT modemIntervalStatsV34Calls | 1.3.6.1.4.1.2637.2.2.1425.1.108 | INTEGER | read-only | Total number of calls that have connected with V.34 modulation in the system. |
| INT modemIntervalStatsV90Calls | 1.3.6.1.4.1.2637.2.2.1425.1.107 | INTEGER | read-only | Total number of calls that have connected with V.90 modulation in the system. |
| OCT modemSessionStats2AmpV2String | 1.3.6.1.4.1.2637.2.2.1427.1.401 | OCTET STRING | read-only | &V2 string from this session |
| STR modemSessionStats2ConnectString | 1.3.6.1.4.1.2637.2.2.1427.1.301 | DisplayString | read-only | CONNECT string from this session |
| INT modemSessionStats2DataValidity | 1.3.6.1.4.1.2637.2.2.1427.1.1 | INTEGER | read-only | Specifies whether data is valid |
| INT modemSessionStats2DMMNumber | 1.3.6.1.4.1.2637.2.2.1427.1.5 | INTEGER | read-only | Modem's DMM number |
| modemSessionStats2Entry | 1.3.6.1.4.1.2637.2.2.1427.1 | not-accessible | This is the structure of entries in the modemSessionStats2Table. | |
| INT modemSessionStats2InitialRxSpeed | 1.3.6.1.4.1.2637.2.2.1427.1.202 | INTEGER | read-only | Initial transmit speed |
| INT modemSessionStats2InitialTxSpeed | 1.3.6.1.4.1.2637.2.2.1427.1.201 | INTEGER | read-only | Initial transmit speed |
| INT modemSessionStats2IOPNumber | 1.3.6.1.4.1.2637.2.2.1427.1.4 | INTEGER | read-only | Modem's IOP number |
| INT modemSessionStats2ModemIndex | 1.3.6.1.4.1.2637.2.2.1427.1.8 | INTEGER | read-only | Modem's system-wide number |
| INT modemSessionStats2ModemNumber | 1.3.6.1.4.1.2637.2.2.1427.1.7 | INTEGER | read-only | Modem's index number |
| INT modemSessionStats2PackNumber | 1.3.6.1.4.1.2637.2.2.1427.1.6 | INTEGER | read-only | Modem's Pack number |
| INT modemSessionStats2SessionID | 1.3.6.1.4.1.2637.2.2.1427.1.2 | INTEGER | read-only | Session ID associated with this data |
| INT modemSessionStats2SlotNumber | 1.3.6.1.4.1.2637.2.2.1427.1.3 | INTEGER | read-only | Modem slot number |
| modemSessionStats2Table | 1.3.6.1.4.1.2637.2.2.1427 | not-accessible | Extended modem session stats table. | |
| INT modemSessionStats2TDMSlot | 1.3.6.1.4.1.2637.2.2.1427.1.102 | INTEGER | read-only | TDM slot used for this session |
| INT modemSessionStats2TDMStream | 1.3.6.1.4.1.2637.2.2.1427.1.101 | INTEGER | read-only | TDM stream used for this session |
| OCT modemSessionStatsAmpV2String | 1.3.6.1.4.1.2637.2.2.1426.1.401 | OCTET STRING | read-only | &V2 string from this session |
| STR modemSessionStatsConnectString | 1.3.6.1.4.1.2637.2.2.1426.1.301 | DisplayString | read-only | CONNECT string from this session |
| INT modemSessionStatsDataValidity | 1.3.6.1.4.1.2637.2.2.1426.1.1 | INTEGER | read-only | Specifies whether data is valid |
| INT modemSessionStatsDMMNumber | 1.3.6.1.4.1.2637.2.2.1426.1.5 | INTEGER | read-only | Modem's DMM number |
| modemSessionStatsEntry | 1.3.6.1.4.1.2637.2.2.1426.1 | not-accessible | This is the structure of entries in the modemSessionStatsTable. | |
| INT modemSessionStatsInitialRxSpeed | 1.3.6.1.4.1.2637.2.2.1426.1.202 | INTEGER | read-only | Initial transmit speed |
| INT modemSessionStatsInitialTxSpeed | 1.3.6.1.4.1.2637.2.2.1426.1.201 | INTEGER | read-only | Initial transmit speed |
| INT modemSessionStatsIOPNumber | 1.3.6.1.4.1.2637.2.2.1426.1.4 | INTEGER | read-only | Modem's IOP number |
| INT modemSessionStatsModemIndex | 1.3.6.1.4.1.2637.2.2.1426.1.8 | INTEGER | read-only | Modem's system-wide number |
| INT modemSessionStatsModemNumber | 1.3.6.1.4.1.2637.2.2.1426.1.7 | INTEGER | read-only | Modem's index number |
| INT modemSessionStatsPackNumber | 1.3.6.1.4.1.2637.2.2.1426.1.6 | INTEGER | read-only | Modem's Pack number |
| INT modemSessionStatsSessionID | 1.3.6.1.4.1.2637.2.2.1426.1.2 | INTEGER | read-only | Session ID associated with this data |
| INT modemSessionStatsSlotNumber | 1.3.6.1.4.1.2637.2.2.1426.1.3 | INTEGER | read-only | Modem slot number |
| modemSessionStatsTable | 1.3.6.1.4.1.2637.2.2.1426 | not-accessible | Modem session stats table. | |
| INT modemSessionStatsTDMSlot | 1.3.6.1.4.1.2637.2.2.1426.1.102 | INTEGER | read-only | TDM slot used for this session |
| INT modemSessionStatsTDMStream | 1.3.6.1.4.1.2637.2.2.1426.1.101 | INTEGER | read-only | TDM stream used for this session |
| INT modemStatsAuthCalls | 1.3.6.1.4.1.2637.2.2.1422.1.301 | INTEGER | read-only | The total numer of calls on which this modem has connected, and which have proceeded to the authentication stage. This does not mean that authentication was successful, just that it was attempted. |
| INT modemStatsAuthLose | 1.3.6.1.4.1.2637.2.2.1422.1.304 | INTEGER | read-only | The number of consecutive calls assigned to this modem that did not reach the authentication stage. A value of 0 indicates that the last call did reach the authentication stage. |
| INT modemStatsAuthWin | 1.3.6.1.4.1.2637.2.2.1422.1.303 | INTEGER | read-only | The number of consecutive calls assigned to this modem that connected and reached the authentication stage. A value of 0 indicates that the last call did not reach the authentication stage. |
| INT modemStatsConnectedCalls | 1.3.6.1.4.1.2637.2.2.1422.1.201 | INTEGER | read-only | The total numer of calls on which this modem has successfully negotiated a connection with the remote modem. |
| INT modemStatsConnectedLose | 1.3.6.1.4.1.2637.2.2.1422.1.204 | INTEGER | read-only | The number of consecutive calls assigned to this modem that did not connect successfully. A value of 0 indicates that the last call did connect successfully. |
| INT modemStatsConnectedWin | 1.3.6.1.4.1.2637.2.2.1422.1.203 | INTEGER | read-only | The number of consecutive calls assigned to this modem that connected successfully. A value of 0 indicates that the last call did not connect successfully. |
| INT modemStatsCurrentSessionID | 1.3.6.1.4.1.2637.2.2.1422.1.7 | INTEGER | read-only | If active, the ID of the modem's session |
| INT modemStatsDCCalls | 1.3.6.1.4.1.2637.2.2.1422.1.402 | INTEGER | read-only | The total numer of calls on which this modem has connected and negotiated a data compression protocol. |
| INT modemStatsDMM | 1.3.6.1.4.1.2637.2.2.1422.1.4 | INTEGER | read-only | The DMM on the card that contains this modem |
| INT modemStatsDownloadAttempts | 1.3.6.1.4.1.2637.2.2.1422.1.1001 | INTEGER | read-only | Number of times code was downloaded to the modem's pack |
| INT modemStatsDownloadSuccesses | 1.3.6.1.4.1.2637.2.2.1422.1.1002 | INTEGER | read-only | Number of times code downloaded succeeded |
| INT modemStatsECCalls | 1.3.6.1.4.1.2637.2.2.1422.1.401 | INTEGER | read-only | The total numer of calls on which this modem has connected and negotiated an error correction protocol. |
| modemStatsEntry | 1.3.6.1.4.1.2637.2.2.1422.1 | not-accessible | This is the structure of entries in the modemStatsTable. | |
| INT modemStatsFinalRxSum | 1.3.6.1.4.1.2637.2.2.1422.1.511 | INTEGER | read-only | The sum of the final receive speeds on all calls for which call statistics were obtained. This number can be divided by the StatsSamples value to obtain an average final receive speed. |
| INT modemStatsFinalTxSum | 1.3.6.1.4.1.2637.2.2.1422.1.505 | INTEGER | read-only | The sum of the final transmit speeds on all calls for which call statistics were obtained. This number can be divided by the StatsSamples value to obtain an average final transmit speed. |
| INT modemStatsInitialRxSum | 1.3.6.1.4.1.2637.2.2.1422.1.508 | INTEGER | read-only | The sum of the initial receive speeds on all calls for which call statistics were obtained. This number can be divided by the ConnectedCalls value to obtain an average initial receive speed. |
| INT modemStatsInitialTxSum | 1.3.6.1.4.1.2637.2.2.1422.1.502 | INTEGER | read-only | The sum of the initial transmit speeds on all calls for which call statistics were obtained. This number can be divided by the ConnectedCalls value to obtain an average initial transmit speed. |
| INT modemStatsIOP | 1.3.6.1.4.1.2637.2.2.1422.1.3 | INTEGER | read-only | The IOP on the card that controls this modem |
| INT modemStatsK56Calls | 1.3.6.1.4.1.2637.2.2.1422.1.403 | INTEGER | read-only | The total numer of calls on which this modem has connected and negotiated the K56 Flex modulation protocol. |
| INT modemStatsLast32Auth | 1.3.6.1.4.1.2637.2.2.1422.1.302 | INTEGER | read-only | A bitmask indicating connection success (bit is set) or failure (bit is not set) on the last 32 calls reaching the authentication stage. The lowest-order bit represents the most recent call, and the highest-order bit represents the oldest call. |
| INT modemStatsLast32Calls | 1.3.6.1.4.1.2637.2.2.1422.1.202 | INTEGER | read-only | A bitmask indicating connection success (bit is set) or failure (bit is not set) on the last 32 calls. The lowest-order bit represents the most recent call, and the highest-order bit represents the oldest call. |
| INT modemStatsMaxRxSpeed | 1.3.6.1.4.1.2637.2.2.1422.1.513 | INTEGER | read-only | The maximum receive speed negotiated by this modem. |
| INT modemStatsMaxRxSum | 1.3.6.1.4.1.2637.2.2.1422.1.510 | INTEGER | read-only | The sum of the maximum receive speeds on all calls for which call statistics were obtained. This number can be divided by the StatsSamples value to obtain an average maximum receive speed. |
| INT modemStatsMaxTxSpeed | 1.3.6.1.4.1.2637.2.2.1422.1.507 | INTEGER | read-only | The maximum transmit speed negotiated by this modem. |
| INT modemStatsMaxTxSum | 1.3.6.1.4.1.2637.2.2.1422.1.504 | INTEGER | read-only | The sum of the maximum transmit speeds on all calls for which call statistics were obtained. This number can be divided by the StatsSamples value to obtain an average maximum transmit speed. |
| INT modemStatsMinRxSpeed | 1.3.6.1.4.1.2637.2.2.1422.1.512 | INTEGER | read-only | The minimum receive speed negotiated by this modem. |
| INT modemStatsMinRxSum | 1.3.6.1.4.1.2637.2.2.1422.1.509 | INTEGER | read-only | The sum of the minimum receive speeds on all calls for which call statistics were obtained. This number can be divided by the StatsSamples value to obtain an average minimum receive speed. |
| INT modemStatsMinTxSpeed | 1.3.6.1.4.1.2637.2.2.1422.1.506 | INTEGER | read-only | The minimum transmit speed negotiated by this modem. |
| INT modemStatsMinTxSum | 1.3.6.1.4.1.2637.2.2.1422.1.503 | INTEGER | read-only | The sum of the minimum transmit speeds on all calls for which call statistics were obtained. This number can be divided by the StatsSamples value to obtain an average minimum transmit speed. |
| INT modemStatsModem | 1.3.6.1.4.1.2637.2.2.1422.1.6 | INTEGER | read-only | The modem's number on the pack |
| INT modemStatsModemIndex | 1.3.6.1.4.1.2637.2.2.1422.1.8 | INTEGER | read-only | The modem number associated with this entry |
| INT modemStatsPack | 1.3.6.1.4.1.2637.2.2.1422.1.5 | INTEGER | read-only | The pack on the DMM that contains this modem |
| INT modemStatsPackCrashes | 1.3.6.1.4.1.2637.2.2.1422.1.1005 | INTEGER | read-only | Number of times the modem's pack seems to have crashed |
| INT modemStatsPackRevivals | 1.3.6.1.4.1.2637.2.2.1422.1.1006 | INTEGER | read-only | Number of times the modem's apparently-crashed pack was revived with a download |
| INT modemStatsResetFailures | 1.3.6.1.4.1.2637.2.2.1422.1.1003 | INTEGER | read-only | Number of times the modem failed to respond to commands |
| INT modemStatsResetRevivals | 1.3.6.1.4.1.2637.2.2.1422.1.1004 | INTEGER | read-only | Number of times the modem was revived from the non-responsive state |
| INT modemStatsRPI | 1.3.6.1.4.1.2637.2.2.1422.1.101 | INTEGER | read-only | This modem's current rating (0..100). A modem's RPI reveals a modem's quality relative to other modems. |
| INT modemStatsSlot | 1.3.6.1.4.1.2637.2.2.1422.1.2 | INTEGER | read-only | The slot that contains this modem |
| INT modemStatsState | 1.3.6.1.4.1.2637.2.2.1422.1.1 | INTEGER | read-only | Modem's current state. |
| INT modemStatsStatsSamples | 1.3.6.1.4.1.2637.2.2.1422.1.501 | INTEGER | read-only | The total numer of calls on which call statistics were obtained. These statistics include minimum and maximum speeds, retrains and renegotiations, etc. |
| modemStatsTable | 1.3.6.1.4.1.2637.2.2.1422 | not-accessible | Modem stats table. | |
| INT modemStatsTotalCalls | 1.3.6.1.4.1.2637.2.2.1422.1.102 | INTEGER | read-only | The total number of calls assigned to this modem |
| INT modemStatsV32Calls | 1.3.6.1.4.1.2637.2.2.1422.1.406 | INTEGER | read-only | The total numer of calls on which this modem has connected and negotiated the V.32 or V.32bis modulation protocols. |
| INT modemStatsV34Calls | 1.3.6.1.4.1.2637.2.2.1422.1.405 | INTEGER | read-only | The total numer of calls on which this modem has connected and negotiated the V.34 modulation protocol. |
| INT modemStatsV90Calls | 1.3.6.1.4.1.2637.2.2.1422.1.404 | INTEGER | read-only | The total numer of calls on which this modem has connected and negotiated the V.90 modulation protocol. |
| INT modemSummaryStatsActiveCount | 1.3.6.1.4.1.2637.2.2.1424.1.8 | INTEGER | read-only | Total number of modems on this card that are functional and in use |
| INT modemSummaryStatsAuthCalls | 1.3.6.1.4.1.2637.2.2.1424.1.103 | INTEGER | read-only | Total number of calls that have reached the authentication stage in this slot. |
| INT modemSummaryStatsConnectedCalls | 1.3.6.1.4.1.2637.2.2.1424.1.102 | INTEGER | read-only | Total number of calls that have connected in this slot. |
| INT modemSummaryStatsDCCalls | 1.3.6.1.4.1.2637.2.2.1424.1.105 | INTEGER | read-only | Total number of calls that negotiated data compression in this slot. |
| INT modemSummaryStatsDeadCount | 1.3.6.1.4.1.2637.2.2.1424.1.5 | INTEGER | read-only | Total number of modems on this card that are not responding to commands |
| INT modemSummaryStatsDisabledCount | 1.3.6.1.4.1.2637.2.2.1424.1.3 | INTEGER | read-only | Total number of modems on this card that are disabled by config |
| INT modemSummaryStatsDownloadingCount | 1.3.6.1.4.1.2637.2.2.1424.1.9 | INTEGER | read-only | Total number of modems on this card that are currently being downloaded |
| INT modemSummaryStatsECCalls | 1.3.6.1.4.1.2637.2.2.1424.1.104 | INTEGER | read-only | Total number of calls that negotiated error correction in this slot. |
| modemSummaryStatsEntry | 1.3.6.1.4.1.2637.2.2.1424.1 | not-accessible | This is the structure of entries in the modemSummaryStatsTable. | |
| INT modemSummaryStatsIdleCount | 1.3.6.1.4.1.2637.2.2.1424.1.7 | INTEGER | read-only | Total number of modems on this card that are functional, but not in use |
| INT modemSummaryStatsK56Calls | 1.3.6.1.4.1.2637.2.2.1424.1.106 | INTEGER | read-only | Total number of calls that have connected with K56 Flex modulation in this slot. |
| INT modemSummaryStatsMaximumCalls | 1.3.6.1.4.1.2637.2.2.1424.1.401 | INTEGER | read-only | The maximum number of simultaneous calls on the modems in this slot. |
| INT modemSummaryStatsModemCount | 1.3.6.1.4.1.2637.2.2.1424.1.2 | INTEGER | read-only | Total number of modems found on this card |
| INT modemSummaryStatsNoDownloadCount | 1.3.6.1.4.1.2637.2.2.1424.1.4 | INTEGER | read-only | Total number of modems on this card that failed download |
| INT modemSummaryStatsRemovedCount | 1.3.6.1.4.1.2637.2.2.1424.1.6 | INTEGER | read-only | Total number of modems on this card that were taken out of service due to excessive failures |
| BOO modemSummaryStatsReuseSuspectModems | 1.3.6.1.4.1.2637.2.2.1424.1.201 | Boolean | read-only | Specifies whether suspect modems will be used |
| INT modemSummaryStatsSlotNumber | 1.3.6.1.4.1.2637.2.2.1424.1.1 | INTEGER | read-only | Number of slot reporting summary stats |
| modemSummaryStatsTable | 1.3.6.1.4.1.2637.2.2.1424 | not-accessible | Modem stats summary table. | |
| INT modemSummaryStatsTotalCalls | 1.3.6.1.4.1.2637.2.2.1424.1.101 | INTEGER | read-only | The total number of calls assigned to modems in this slot |
| INT modemSummaryStatsUpTime | 1.3.6.1.4.1.2637.2.2.1424.1.301 | INTEGER | read-only | The time (in seconds) this card has been active |
| INT modemSummaryStatsV32Calls | 1.3.6.1.4.1.2637.2.2.1424.1.109 | INTEGER | read-only | Total number of calls that have connected with V.32 or V.32bis modulation in this slot. |
| INT modemSummaryStatsV34Calls | 1.3.6.1.4.1.2637.2.2.1424.1.108 | INTEGER | read-only | Total number of calls that have connected with V.34 modulation in this slot. |
| INT modemSummaryStatsV90Calls | 1.3.6.1.4.1.2637.2.2.1424.1.107 | INTEGER | read-only | Total number of calls that have connected with V.90 modulation in this slot. |
| INT pbufStatsAllocatedCount0 | 1.3.6.1.4.1.2637.2.2.3603.1.103 | INTEGER | read-only | Number of size-0 buffers currently allocated |
| INT pbufStatsAllocatedCount1 | 1.3.6.1.4.1.2637.2.2.3603.1.203 | INTEGER | read-only | Number of size-1 buffers currently allocated |
| INT pbufStatsAllocatedCount2 | 1.3.6.1.4.1.2637.2.2.3603.1.303 | INTEGER | read-only | Number of size-2 buffers currently allocated |
| INT pbufStatsAllocatedCount3 | 1.3.6.1.4.1.2637.2.2.3603.1.403 | INTEGER | read-only | Number of size-3 buffers currently allocated |
| INT pbufStatsAllocatedCount4 | 1.3.6.1.4.1.2637.2.2.3603.1.503 | INTEGER | read-only | Number of size-4 buffers currently allocated |
| INT pbufStatsAllocatedCount5 | 1.3.6.1.4.1.2637.2.2.3603.1.603 | INTEGER | read-only | Number of size-5 buffers currently allocated |
| INT pbufStatsAllocatedMax0 | 1.3.6.1.4.1.2637.2.2.3603.1.105 | INTEGER | read-only | Maximum number of size-0 buffers allocated |
| INT pbufStatsAllocatedMax1 | 1.3.6.1.4.1.2637.2.2.3603.1.205 | INTEGER | read-only | Maximum number of size-1 buffers allocated |
| INT pbufStatsAllocatedMax2 | 1.3.6.1.4.1.2637.2.2.3603.1.305 | INTEGER | read-only | Maximum number of size-2 buffers allocated |
| INT pbufStatsAllocatedMax3 | 1.3.6.1.4.1.2637.2.2.3603.1.405 | INTEGER | read-only | Maximum number of size-3 buffers allocated |
| INT pbufStatsAllocatedMax4 | 1.3.6.1.4.1.2637.2.2.3603.1.505 | INTEGER | read-only | Maximum number of size-4 buffers allocated |
| INT pbufStatsAllocatedMax5 | 1.3.6.1.4.1.2637.2.2.3603.1.605 | INTEGER | read-only | Maximum number of size-5 buffers allocated |
| INT pbufStatsAllocFails0 | 1.3.6.1.4.1.2637.2.2.3603.1.109 | INTEGER | read-only | Number of failed size-0 buffer allocations |
| INT pbufStatsAllocFails1 | 1.3.6.1.4.1.2637.2.2.3603.1.209 | INTEGER | read-only | Number of failed size-1 buffer allocations |
| INT pbufStatsAllocFails2 | 1.3.6.1.4.1.2637.2.2.3603.1.309 | INTEGER | read-only | Number of failed size-2 buffer allocations |
| INT pbufStatsAllocFails3 | 1.3.6.1.4.1.2637.2.2.3603.1.409 | INTEGER | read-only | Number of failed size-3 buffer allocations |
| INT pbufStatsAllocFails4 | 1.3.6.1.4.1.2637.2.2.3603.1.509 | INTEGER | read-only | Number of failed size-4 buffer allocations |
| INT pbufStatsAllocFails5 | 1.3.6.1.4.1.2637.2.2.3603.1.609 | INTEGER | read-only | Number of failed size-5 buffer allocations |
| INT pbufStatsAllocSuccesses0 | 1.3.6.1.4.1.2637.2.2.3603.1.108 | INTEGER | read-only | Number of successful size-0 buffer allocations |
| INT pbufStatsAllocSuccesses1 | 1.3.6.1.4.1.2637.2.2.3603.1.208 | INTEGER | read-only | Number of successful size-1 buffer allocations |
| INT pbufStatsAllocSuccesses2 | 1.3.6.1.4.1.2637.2.2.3603.1.308 | INTEGER | read-only | Number of successful size-2 buffer allocations |
| INT pbufStatsAllocSuccesses3 | 1.3.6.1.4.1.2637.2.2.3603.1.408 | INTEGER | read-only | Number of successful size-3 buffer allocations |
| INT pbufStatsAllocSuccesses4 | 1.3.6.1.4.1.2637.2.2.3603.1.508 | INTEGER | read-only | Number of successful size-4 buffer allocations |
| INT pbufStatsAllocSuccesses5 | 1.3.6.1.4.1.2637.2.2.3603.1.608 | INTEGER | read-only | Number of successful size-5 buffer allocations |
| INT pbufStatsCardType | 1.3.6.1.4.1.2637.2.2.3603.1.2 | INTEGER | read-only | Type of card reporting timer information |
| INT pbufStatsCPUNumber | 1.3.6.1.4.1.2637.2.2.3603.1.3 | INTEGER | read-only | CPU number (0 = main CPU, 1..n = IOP) |
| INT pbufStatsDataSize0 | 1.3.6.1.4.1.2637.2.2.3603.1.101 | INTEGER | read-only | User data size of size-0 buffers |
| INT pbufStatsDataSize1 | 1.3.6.1.4.1.2637.2.2.3603.1.201 | INTEGER | read-only | User data size of size-1 buffers |
| INT pbufStatsDataSize2 | 1.3.6.1.4.1.2637.2.2.3603.1.301 | INTEGER | read-only | User data size of size-2 buffers |
| INT pbufStatsDataSize3 | 1.3.6.1.4.1.2637.2.2.3603.1.401 | INTEGER | read-only | User data size of size-3 buffers |
| INT pbufStatsDataSize4 | 1.3.6.1.4.1.2637.2.2.3603.1.501 | INTEGER | read-only | User data size of size-4 buffers |
| INT pbufStatsDataSize5 | 1.3.6.1.4.1.2637.2.2.3603.1.601 | INTEGER | read-only | User data size of size-5 buffers |
| pbufStatsEntry | 1.3.6.1.4.1.2637.2.2.3603.1 | not-accessible | This is the structure of entries in the pbufStatsTable. | |
| INT pbufStatsFreeCount0 | 1.3.6.1.4.1.2637.2.2.3603.1.106 | INTEGER | read-only | Number of size-0 buffers currently free |
| INT pbufStatsFreeCount1 | 1.3.6.1.4.1.2637.2.2.3603.1.206 | INTEGER | read-only | Number of size-1 buffers currently free |
| INT pbufStatsFreeCount2 | 1.3.6.1.4.1.2637.2.2.3603.1.306 | INTEGER | read-only | Number of size-2 buffers currently free |
| INT pbufStatsFreeCount3 | 1.3.6.1.4.1.2637.2.2.3603.1.406 | INTEGER | read-only | Number of size-3 buffers currently free |
| INT pbufStatsFreeCount4 | 1.3.6.1.4.1.2637.2.2.3603.1.506 | INTEGER | read-only | Number of size-4 buffers currently free |
| INT pbufStatsFreeCount5 | 1.3.6.1.4.1.2637.2.2.3603.1.606 | INTEGER | read-only | Number of size-5 buffers currently free |
| INT pbufStatsFreeFails0 | 1.3.6.1.4.1.2637.2.2.3603.1.111 | INTEGER | read-only | Number of failed size-0 buffer frees |
| INT pbufStatsFreeFails1 | 1.3.6.1.4.1.2637.2.2.3603.1.211 | INTEGER | read-only | Number of failed size-1 buffer frees |
| INT pbufStatsFreeFails2 | 1.3.6.1.4.1.2637.2.2.3603.1.311 | INTEGER | read-only | Number of failed size-2 buffer frees |
| INT pbufStatsFreeFails3 | 1.3.6.1.4.1.2637.2.2.3603.1.411 | INTEGER | read-only | Number of failed size-3 buffer frees |
| INT pbufStatsFreeFails4 | 1.3.6.1.4.1.2637.2.2.3603.1.511 | INTEGER | read-only | Number of failed size-4 buffer frees |
| INT pbufStatsFreeFails5 | 1.3.6.1.4.1.2637.2.2.3603.1.611 | INTEGER | read-only | Number of failed size-5 buffer frees |
| INT pbufStatsFreeMin0 | 1.3.6.1.4.1.2637.2.2.3603.1.107 | INTEGER | read-only | Minimum number of size-0 buffers free |
| INT pbufStatsFreeMin1 | 1.3.6.1.4.1.2637.2.2.3603.1.207 | INTEGER | read-only | Minimum number of size-1 buffers free |
| INT pbufStatsFreeMin2 | 1.3.6.1.4.1.2637.2.2.3603.1.307 | INTEGER | read-only | Minimum number of size-2 buffers free |
| INT pbufStatsFreeMin3 | 1.3.6.1.4.1.2637.2.2.3603.1.407 | INTEGER | read-only | Minimum number of size-3 buffers free |
| INT pbufStatsFreeMin4 | 1.3.6.1.4.1.2637.2.2.3603.1.507 | INTEGER | read-only | Minimum number of size-4 buffers free |
| INT pbufStatsFreeMin5 | 1.3.6.1.4.1.2637.2.2.3603.1.607 | INTEGER | read-only | Minimum number of size-5 buffers free |
| INT pbufStatsFreeSuccesses0 | 1.3.6.1.4.1.2637.2.2.3603.1.110 | INTEGER | read-only | Number of successful size-0 buffer frees |
| INT pbufStatsFreeSuccesses1 | 1.3.6.1.4.1.2637.2.2.3603.1.210 | INTEGER | read-only | Number of successful size-1 buffer frees |
| INT pbufStatsFreeSuccesses2 | 1.3.6.1.4.1.2637.2.2.3603.1.310 | INTEGER | read-only | Number of successful size-2 buffer frees |
| INT pbufStatsFreeSuccesses3 | 1.3.6.1.4.1.2637.2.2.3603.1.410 | INTEGER | read-only | Number of successful size-3 buffer frees |
| INT pbufStatsFreeSuccesses4 | 1.3.6.1.4.1.2637.2.2.3603.1.510 | INTEGER | read-only | Number of successful size-4 buffer frees |
| INT pbufStatsFreeSuccesses5 | 1.3.6.1.4.1.2637.2.2.3603.1.610 | INTEGER | read-only | Number of successful size-5 buffer frees |
| INT pbufStatsPermAllocatedCount0 | 1.3.6.1.4.1.2637.2.2.3603.1.104 | INTEGER | read-only | Number of size-0 buffers permanently allocated |
| INT pbufStatsPermAllocatedCount1 | 1.3.6.1.4.1.2637.2.2.3603.1.204 | INTEGER | read-only | Number of size-1 buffers permanently allocated |
| INT pbufStatsPermAllocatedCount2 | 1.3.6.1.4.1.2637.2.2.3603.1.304 | INTEGER | read-only | Number of size-2 buffers permanently allocated |
| INT pbufStatsPermAllocatedCount3 | 1.3.6.1.4.1.2637.2.2.3603.1.404 | INTEGER | read-only | Number of size-3 buffers permanently allocated |
| INT pbufStatsPermAllocatedCount4 | 1.3.6.1.4.1.2637.2.2.3603.1.504 | INTEGER | read-only | Number of size-4 buffers permanently allocated |
| INT pbufStatsPermAllocatedCount5 | 1.3.6.1.4.1.2637.2.2.3603.1.604 | INTEGER | read-only | Number of size-5 buffers permanently allocated |
| INT pbufStatsSlotNumber | 1.3.6.1.4.1.2637.2.2.3603.1.1 | INTEGER | read-only | Slot number |
| pbufStatsTable | 1.3.6.1.4.1.2637.2.2.3603 | not-accessible | pbuf stats | |
| INT pbufStatsTotalCount0 | 1.3.6.1.4.1.2637.2.2.3603.1.102 | INTEGER | read-only | Number of size-0 buffers created |
| INT pbufStatsTotalCount1 | 1.3.6.1.4.1.2637.2.2.3603.1.202 | INTEGER | read-only | Number of size-1 buffers created |
| INT pbufStatsTotalCount2 | 1.3.6.1.4.1.2637.2.2.3603.1.302 | INTEGER | read-only | Number of size-2 buffers created |
| INT pbufStatsTotalCount3 | 1.3.6.1.4.1.2637.2.2.3603.1.402 | INTEGER | read-only | Number of size-3 buffers created |
| INT pbufStatsTotalCount4 | 1.3.6.1.4.1.2637.2.2.3603.1.502 | INTEGER | read-only | Number of size-4 buffers created |
| INT pbufStatsTotalCount5 | 1.3.6.1.4.1.2637.2.2.3603.1.602 | INTEGER | read-only | Number of size-5 buffers created |
| INT powerStatusCsr1Register | 1.3.6.1.4.1.2637.2.2.11.1.10 | INTEGER | read-only | Inverted contents of CSR1 |
| powerStatusEntry | 1.3.6.1.4.1.2637.2.2.11.1 | not-accessible | This is the structure of entries in the powerStatusTable. | |
| BOO powerStatusExternalDC1 | 1.3.6.1.4.1.2637.2.2.11.1.3 | Boolean | read-only | True if the external DC power supply #1 is operational. |
| BOO powerStatusExternalDC2 | 1.3.6.1.4.1.2637.2.2.11.1.4 | Boolean | read-only | True if the external DC power supply #2 is operational. |
| BOO powerStatusFanStatus | 1.3.6.1.4.1.2637.2.2.11.1.2 | Boolean | read-only | True if the fan tray is operational. |
| BOO powerStatusInternalAC1 | 1.3.6.1.4.1.2637.2.2.11.1.5 | Boolean | read-only | True if the internal AC power supply #1 is operational. |
| BOO powerStatusInternalAC2 | 1.3.6.1.4.1.2637.2.2.11.1.6 | Boolean | read-only | True if the internal AC power supply #2 is operational. |
| BOO powerStatusInternalACDC1 | 1.3.6.1.4.1.2637.2.2.11.1.7 | Boolean | read-only | True if the internal AC/DC power supply #1 is operational. |
| BOO powerStatusInternalACDC2 | 1.3.6.1.4.1.2637.2.2.11.1.8 | Boolean | read-only | True if the internal AC/DC power supply #2 is operational. |
| BOO powerStatusInternalACDC3 | 1.3.6.1.4.1.2637.2.2.11.1.9 | Boolean | read-only | True if the internal AC/DC power supply #3 is operational. |
| INT powerStatusShelf | 1.3.6.1.4.1.2637.2.2.11.1.1 | INTEGER | read-only | The shelf number for which the power status is reported. |
| powerStatusTable | 1.3.6.1.4.1.2637.2.2.11 | not-accessible | The current state of the power supplies in the system, as reported mechanically by the hardware. | |
| pppDeadLogEntryEntry | 1.3.6.1.4.1.2637.2.2.1317.1 | not-accessible | This is the structure of entries in the pppDeadLogEntryTable. | |
| OCT pppDeadLogEntryEntryText | 1.3.6.1.4.1.2637.2.2.1317.1.5 | OCTET STRING | read-only | Log entry text. |
| INT pppDeadLogEntryIndex | 1.3.6.1.4.1.2637.2.2.1317.1.2 | INTEGER | read-only | Log entry index |
| INT pppDeadLogEntryMaxIndex | 1.3.6.1.4.1.2637.2.2.1317.1.4 | INTEGER | read-only | Index of newest event available |
| INT pppDeadLogEntryMinIndex | 1.3.6.1.4.1.2637.2.2.1317.1.3 | INTEGER | read-only | Index of oldest event available |
| OCT pppDeadLogEntryRawEntryText | 1.3.6.1.4.1.2637.2.2.1317.1.6 | OCTET STRING | read-only | Raw entry text, if appropriate for this log type. |
| INT pppDeadLogEntrySessionId | 1.3.6.1.4.1.2637.2.2.1317.1.1 | INTEGER | read-only | System session ID |
| pppDeadLogEntryTable | 1.3.6.1.4.1.2637.2.2.1317 | not-accessible | PPP dead log entry table. | |
| INT pppDeadSessionStatsCCPResetsReceived | 1.3.6.1.4.1.2637.2.2.1320.1.1110 | INTEGER | read-only | Total number of CCP Reset-Request frames received. Each Reset-Request received indicates that the remote system encountered an error while decompressing data transmitted by the CVX. |
| INT pppDeadSessionStatsCCPResetsSent | 1.3.6.1.4.1.2637.2.2.1320.1.1109 | INTEGER | read-only | Total number of CCP Reset-Request frames transmitted. Each Reset-Request sent indicates that the CVX encountered an error while decompressing data transmitted by the remote system. |
| INT pppDeadSessionStatsCCPState | 1.3.6.1.4.1.2637.2.2.1320.1.501 | INTEGER | read-only | State of Compression Control Protocol negotiation |
| INT pppDeadSessionStatsConnectLimit | 1.3.6.1.4.1.2637.2.2.1320.1.5 | INTEGER | read-only | Maximum connect time (in seconds) allowed |
| BOO pppDeadSessionStatsDeadSession | 1.3.6.1.4.1.2637.2.2.1320.1.9 | Boolean | read-only | True if session is dead/disconnected |
| INT pppDeadSessionStatsDNSAddress1 | 1.3.6.1.4.1.2637.2.2.1320.1.404 | INTEGER | read-only | First DNS address passed to remote user |
| INT pppDeadSessionStatsDNSAddress2 | 1.3.6.1.4.1.2637.2.2.1320.1.405 | INTEGER | read-only | Second DNS address passed to remote user |
| pppDeadSessionStatsEntry | 1.3.6.1.4.1.2637.2.2.1320.1 | not-accessible | This is the structure of entries in the pppDeadSessionStatsTable. | |
| INT pppDeadSessionStatsInactivityLimit | 1.3.6.1.4.1.2637.2.2.1320.1.7 | INTEGER | read-only | Inactivity time (in seconds) allowed before disconnecting |
| INT pppDeadSessionStatsInactivityRemaining | 1.3.6.1.4.1.2637.2.2.1320.1.8 | INTEGER | read-only | Time (in seconds) before disconnection due to inactivity |
| INT pppDeadSessionStatsInterfaceType | 1.3.6.1.4.1.2637.2.2.1320.1.101 | INTEGER | read-only | Interface type (modem, ISDN, etc.) |
| INT pppDeadSessionStatsIPCPState | 1.3.6.1.4.1.2637.2.2.1320.1.401 | INTEGER | read-only | State of IP Control Protocol negotiation |
| INT pppDeadSessionStatsIPXCPState | 1.3.6.1.4.1.2637.2.2.1320.1.451 | INTEGER | read-only | State of IPX Control Protocol negotiation |
| INT pppDeadSessionStatsLCPState | 1.3.6.1.4.1.2637.2.2.1320.1.201 | INTEGER | read-only | State of Link Control Protocol negotiation |
| INT pppDeadSessionStatsLocalACCM | 1.3.6.1.4.1.2637.2.2.1320.1.210 | INTEGER | read-only | ACCM negotiated by local LCP |
| BOO pppDeadSessionStatsLocalACFC | 1.3.6.1.4.1.2637.2.2.1320.1.208 | Boolean | read-only | Address and Control Field Compression negotiated by local LCP |
| INT pppDeadSessionStatsLocalAuthProtocol | 1.3.6.1.4.1.2637.2.2.1320.1.204 | INTEGER | read-only | Authentication protocol negotiated by local LCP |
| INT pppDeadSessionStatsLocalCompressAlgorithm | 1.3.6.1.4.1.2637.2.2.1320.1.502 | INTEGER | read-only | Compression algorithm negotiated by local CCP, and thus the algorithm used when the CVX decompresses data. |
| INT pppDeadSessionStatsLocalCompressHistories | 1.3.6.1.4.1.2637.2.2.1320.1.503 | INTEGER | read-only | Number of compression histories negotiated by local CCP |
| INT pppDeadSessionStatsLocalIPAddress | 1.3.6.1.4.1.2637.2.2.1320.1.402 | INTEGER | read-only | Local IP address |
| INT pppDeadSessionStatsLocalMRRU | 1.3.6.1.4.1.2637.2.2.1320.1.212 | INTEGER | read-only | MRRU negotiated by local LCP |
| INT pppDeadSessionStatsLocalMRU | 1.3.6.1.4.1.2637.2.2.1320.1.202 | INTEGER | read-only | MRU negotiated by local LCP |
| BOO pppDeadSessionStatsLocalPFC | 1.3.6.1.4.1.2637.2.2.1320.1.206 | Boolean | read-only | Protocol Field Compression negotiated by local LCP |
| BOO pppDeadSessionStatsLocalShortSeq | 1.3.6.1.4.1.2637.2.2.1320.1.214 | Boolean | read-only | MLP short sequence numbers negotiated by local LCP |
| BOO pppDeadSessionStatsLocalVJ | 1.3.6.1.4.1.2637.2.2.1320.1.408 | Boolean | read-only | VJ header compression negotiated by local IPCP |
| INT pppDeadSessionStatsLocalVJSlots | 1.3.6.1.4.1.2637.2.2.1320.1.409 | INTEGER | read-only | Number of VJ slots negotiated by local IPCP |
| INT pppDeadSessionStatsMLPFragmentsDropped | 1.3.6.1.4.1.2637.2.2.1320.1.607 | INTEGER | read-only | Total number of multilink fragments received, but dropped |
| INT pppDeadSessionStatsMLPFragmentsMissing | 1.3.6.1.4.1.2637.2.2.1320.1.606 | INTEGER | read-only | Number of times a missing multilink fragment was detected. |
| INT pppDeadSessionStatsMLPFragmentsReceived | 1.3.6.1.4.1.2637.2.2.1320.1.605 | INTEGER | read-only | Total number of multilink fragments received |
| INT pppDeadSessionStatsMLPPacketsNull | 1.3.6.1.4.1.2637.2.2.1320.1.609 | INTEGER | read-only | Total number of 0-length packets reassembled |
| INT pppDeadSessionStatsMLPPacketsReassembled | 1.3.6.1.4.1.2637.2.2.1320.1.608 | INTEGER | read-only | Total number of packets reassembled from multilink fragments |
| BOO pppDeadSessionStatsMultilinkActive | 1.3.6.1.4.1.2637.2.2.1320.1.601 | Boolean | read-only | Multilink active |
| INT pppDeadSessionStatsMultilinkLinks | 1.3.6.1.4.1.2637.2.2.1320.1.602 | INTEGER | read-only | Number of links in multilink bundle. 0 if multilink is not active. |
| INT pppDeadSessionStatsMultilinkLinksAdded | 1.3.6.1.4.1.2637.2.2.1320.1.610 | INTEGER | read-only | Number of links added to multilink bundle over the bundle's life |
| INT pppDeadSessionStatsMultilinkLinksMax | 1.3.6.1.4.1.2637.2.2.1320.1.612 | INTEGER | read-only | Maximum number of links ever in multilink bundle |
| INT pppDeadSessionStatsMultilinkLinksMaxConfig | 1.3.6.1.4.1.2637.2.2.1320.1.613 | INTEGER | read-only | Maximum number of links allowed in multilink bundle |
| INT pppDeadSessionStatsMultilinkLinksRemoved | 1.3.6.1.4.1.2637.2.2.1320.1.611 | INTEGER | read-only | Number of links removed from multilink bundle over the bundle's life |
| INT pppDeadSessionStatsNBNSAddress1 | 1.3.6.1.4.1.2637.2.2.1320.1.406 | INTEGER | read-only | First NBNS address passed to remote user |
| INT pppDeadSessionStatsNBNSAddress2 | 1.3.6.1.4.1.2637.2.2.1320.1.407 | INTEGER | read-only | Second NBNS address passed to remote user |
| INT pppDeadSessionStatsPhase | 1.3.6.1.4.1.2637.2.2.1320.1.2 | INTEGER | read-only | Current PPP phase |
| INT pppDeadSessionStatsRemainingTime | 1.3.6.1.4.1.2637.2.2.1320.1.6 | INTEGER | read-only | Time (in seconds) remaining. -1 indicates umlimited time. |
| INT pppDeadSessionStatsRemoteACCM | 1.3.6.1.4.1.2637.2.2.1320.1.211 | INTEGER | read-only | ACCM negotiated by remote LCP |
| BOO pppDeadSessionStatsRemoteACFC | 1.3.6.1.4.1.2637.2.2.1320.1.209 | Boolean | read-only | Address and Control Field Compression negotiated by remote LCP |
| BOO pppDeadSessionStatsRemoteAuthenticated | 1.3.6.1.4.1.2637.2.2.1320.1.301 | Boolean | read-only | Remote user has been authenticated |
| INT pppDeadSessionStatsRemoteAuthProtocol | 1.3.6.1.4.1.2637.2.2.1320.1.205 | INTEGER | read-only | Authentication protocol negotiated by remote LCP |
| INT pppDeadSessionStatsRemoteCompressAlgorithm | 1.3.6.1.4.1.2637.2.2.1320.1.504 | INTEGER | read-only | Compression algorithm negotiated by remote CCP, and thus the algorithm used when the CVX compresses data. |
| INT pppDeadSessionStatsRemoteCompressHistories | 1.3.6.1.4.1.2637.2.2.1320.1.505 | INTEGER | read-only | Number of compression histories negotiated by remote CCP |
| INT pppDeadSessionStatsRemoteIPAddress | 1.3.6.1.4.1.2637.2.2.1320.1.403 | INTEGER | read-only | IP address assigned to remote user |
| INT pppDeadSessionStatsRemoteIPXNetwork | 1.3.6.1.4.1.2637.2.2.1320.1.452 | INTEGER | read-only | Remote IPX Network number |
| STR pppDeadSessionStatsRemoteIPXNode | 1.3.6.1.4.1.2637.2.2.1320.1.453 | DisplayString | read-only | Remote IPX Node number |
| INT pppDeadSessionStatsRemoteMRRU | 1.3.6.1.4.1.2637.2.2.1320.1.213 | INTEGER | read-only | MRRU negotiated by remote LCP |
| INT pppDeadSessionStatsRemoteMRU | 1.3.6.1.4.1.2637.2.2.1320.1.203 | INTEGER | read-only | MRU negotiated by remote LCP |
| BOO pppDeadSessionStatsRemotePFC | 1.3.6.1.4.1.2637.2.2.1320.1.207 | Boolean | read-only | Protocol Field Compression negotiated by remote LCP |
| BOO pppDeadSessionStatsRemoteShortSeq | 1.3.6.1.4.1.2637.2.2.1320.1.215 | Boolean | read-only | MLP short sequence numbers negotiated by remote LCP |
| BOO pppDeadSessionStatsRemoteVJ | 1.3.6.1.4.1.2637.2.2.1320.1.410 | Boolean | read-only | VJ header compression negotiated by remote IPCP |
| INT pppDeadSessionStatsRemoteVJSlots | 1.3.6.1.4.1.2637.2.2.1320.1.411 | INTEGER | read-only | Number of VJ slots negotiated by remote IPCP |
| INT pppDeadSessionStatsRxAbortErrors | 1.3.6.1.4.1.2637.2.2.1320.1.1204 | INTEGER | read-only | Total number of receives aborted |
| INT pppDeadSessionStatsRxAlignErrors | 1.3.6.1.4.1.2637.2.2.1320.1.1208 | INTEGER | read-only | Total number of receives dropped due to mis-alignment |
| INT pppDeadSessionStatsRxBigErrors | 1.3.6.1.4.1.2637.2.2.1320.1.1206 | INTEGER | read-only | Total number of receives that were too large |
| INT pppDeadSessionStatsRxBytes | 1.3.6.1.4.1.2637.2.2.1320.1.1006 | INTEGER | read-only | Total number of protocol bytes received |
| INT pppDeadSessionStatsRxBytesAfterCompress | 1.3.6.1.4.1.2637.2.2.1320.1.1106 | INTEGER | read-only | Total number of protocol bytes received after compression. 0 if compression was not negotiated |
| INT pppDeadSessionStatsRxBytesBeforeCompress | 1.3.6.1.4.1.2637.2.2.1320.1.1105 | INTEGER | read-only | Total number of protocol bytes received before compression. 0 if compression was not negotiated |
| INT pppDeadSessionStatsRxBytesUncompressed | 1.3.6.1.4.1.2637.2.2.1320.1.1107 | INTEGER | read-only | Total number of protocol bytes received without compression. This occurs when compression causes the data to grow instead of shrink. 0 if compression was not negotiated |
| INT pppDeadSessionStatsRxCompPacketsDropped | 1.3.6.1.4.1.2637.2.2.1320.1.1108 | INTEGER | read-only | Number of compressed packets received but dropped (due to invalid sequence number, data corruption, etc.) |
| INT pppDeadSessionStatsRxCRCErrors | 1.3.6.1.4.1.2637.2.2.1320.1.1203 | INTEGER | read-only | Total number of receives dropped due to invalid CRC |
| INT pppDeadSessionStatsRxOverrunErrors | 1.3.6.1.4.1.2637.2.2.1320.1.1205 | INTEGER | read-only | Total number of receives dropped due to overruns |
| INT pppDeadSessionStatsRxPackets | 1.3.6.1.4.1.2637.2.2.1320.1.1004 | INTEGER | read-only | Number of protocol packets received |
| INT pppDeadSessionStatsRxPacketsDropped | 1.3.6.1.4.1.2637.2.2.1320.1.1005 | INTEGER | read-only | Number of protocol packets not received (out of resources, queue limit reached, etc.) |
| INT pppDeadSessionStatsRxQueueErrors | 1.3.6.1.4.1.2637.2.2.1320.1.1202 | INTEGER | read-only | Total number of receives dropped due to queue depth |
| INT pppDeadSessionStatsRxResourceErrors | 1.3.6.1.4.1.2637.2.2.1320.1.1201 | INTEGER | read-only | Total number of receives dropped due to lack of a buffer |
| INT pppDeadSessionStatsRxSmallErrors | 1.3.6.1.4.1.2637.2.2.1320.1.1207 | INTEGER | read-only | Total number of receives that were too small |
| INT pppDeadSessionStatsRxSpeed | 1.3.6.1.4.1.2637.2.2.1320.1.103 | INTEGER | read-only | Transmit speed in bits per second |
| INT pppDeadSessionStatsSessionID | 1.3.6.1.4.1.2637.2.2.1320.1.1 | INTEGER | read-only | System session ID |
| pppDeadSessionStatsTable | 1.3.6.1.4.1.2637.2.2.1320 | not-accessible | PPP dead session stats table. | |
| INT pppDeadSessionStatsTotalRxSpeed | 1.3.6.1.4.1.2637.2.2.1320.1.604 | INTEGER | read-only | Sum of receive speeds on all links in multilink bundle. 0 if multilink is not active |
| INT pppDeadSessionStatsTotalTxSpeed | 1.3.6.1.4.1.2637.2.2.1320.1.603 | INTEGER | read-only | Sum of transmit speeds on all links in multilink bundle. 0 if multilink is not active |
| INT pppDeadSessionStatsTxBigErrors | 1.3.6.1.4.1.2637.2.2.1320.1.1211 | INTEGER | read-only | Total number of transmits that were too large |
| INT pppDeadSessionStatsTxBytes | 1.3.6.1.4.1.2637.2.2.1320.1.1003 | INTEGER | read-only | Total number of protocol bytes transmitted |
| INT pppDeadSessionStatsTxBytesAfterCompress | 1.3.6.1.4.1.2637.2.2.1320.1.1103 | INTEGER | read-only | Total number of protocol bytes transmitted after compression. 0 if compression was not negotiated |
| INT pppDeadSessionStatsTxBytesBeforeCompress | 1.3.6.1.4.1.2637.2.2.1320.1.1102 | INTEGER | read-only | Total number of protocol bytes transmitted before compression. 0 if compression was not negotiated |
| INT pppDeadSessionStatsTxBytesUncompressed | 1.3.6.1.4.1.2637.2.2.1320.1.1104 | INTEGER | read-only | Total number of protocol bytes transmitted without compression. This occurs when compression causes the data to grow instead of shrink. 0 if compression was not negotiated |
| BOO pppDeadSessionStatsTxCompressing | 1.3.6.1.4.1.2637.2.2.1320.1.1101 | Boolean | read-only | Compression of transmitted frames is enabled in configuration |
| INT pppDeadSessionStatsTxPackets | 1.3.6.1.4.1.2637.2.2.1320.1.1001 | INTEGER | read-only | Number of protocol packets transmitted |
| INT pppDeadSessionStatsTxPacketsDropped | 1.3.6.1.4.1.2637.2.2.1320.1.1002 | INTEGER | read-only | Number of protocol packets not transmitted (out of resources, queue limit reached, etc.) |
| INT pppDeadSessionStatsTxQueueErrors | 1.3.6.1.4.1.2637.2.2.1320.1.1210 | INTEGER | read-only | Total number of transmits dropped due to queue depth |
| INT pppDeadSessionStatsTxResourceErrors | 1.3.6.1.4.1.2637.2.2.1320.1.1209 | INTEGER | read-only | Total number of transmits dropped due to lack of a buffer |
| INT pppDeadSessionStatsTxSpeed | 1.3.6.1.4.1.2637.2.2.1320.1.102 | INTEGER | read-only | Transmit speed in bits per second |
| INT pppDeadSessionStatsTxUnderrunErrors | 1.3.6.1.4.1.2637.2.2.1320.1.1212 | INTEGER | read-only | Total number of transmits dropped due to underruns |
| INT pppDeadSessionStatsUpTime | 1.3.6.1.4.1.2637.2.2.1320.1.4 | INTEGER | read-only | Time (in seconds) session has been connected |
| STR pppDeadSessionStatsUserName | 1.3.6.1.4.1.2637.2.2.1320.1.3 | DisplayString | read-only | User name |
| pppLogEntryEntry | 1.3.6.1.4.1.2637.2.2.1316.1 | not-accessible | This is the structure of entries in the pppLogEntryTable. | |
| OCT pppLogEntryEntryText | 1.3.6.1.4.1.2637.2.2.1316.1.5 | OCTET STRING | read-only | Log entry text. |
| INT pppLogEntryIndex | 1.3.6.1.4.1.2637.2.2.1316.1.2 | INTEGER | read-only | Log entry index |
| INT pppLogEntryMaxIndex | 1.3.6.1.4.1.2637.2.2.1316.1.4 | INTEGER | read-only | Index of newest event available |
| INT pppLogEntryMinIndex | 1.3.6.1.4.1.2637.2.2.1316.1.3 | INTEGER | read-only | Index of oldest event available |
| OCT pppLogEntryRawEntryText | 1.3.6.1.4.1.2637.2.2.1316.1.6 | OCTET STRING | read-only | Raw entry text, if appropriate for this log type. |
| INT pppLogEntrySessionId | 1.3.6.1.4.1.2637.2.2.1316.1.1 | INTEGER | read-only | System session ID |
| pppLogEntryTable | 1.3.6.1.4.1.2637.2.2.1316 | not-accessible | PPP log entry table. | |
| INT pppSessionStatsCCPResetsReceived | 1.3.6.1.4.1.2637.2.2.1318.1.1110 | INTEGER | read-only | Total number of CCP Reset-Request frames received. Each Reset-Request received indicates that the remote system encountered an error while decompressing data transmitted by the CVX. |
| INT pppSessionStatsCCPResetsSent | 1.3.6.1.4.1.2637.2.2.1318.1.1109 | INTEGER | read-only | Total number of CCP Reset-Request frames transmitted. Each Reset-Request sent indicates that the CVX encountered an error while decompressing data transmitted by the remote system. |
| INT pppSessionStatsCCPState | 1.3.6.1.4.1.2637.2.2.1318.1.501 | INTEGER | read-only | State of Compression Control Protocol negotiation |
| INT pppSessionStatsConnectLimit | 1.3.6.1.4.1.2637.2.2.1318.1.5 | INTEGER | read-only | Maximum connect time (in seconds) allowed |
| BOO pppSessionStatsDeadSession | 1.3.6.1.4.1.2637.2.2.1318.1.9 | Boolean | read-only | True if session is dead/disconnected |
| INT pppSessionStatsDNSAddress1 | 1.3.6.1.4.1.2637.2.2.1318.1.404 | INTEGER | read-only | First DNS address passed to remote user |
| INT pppSessionStatsDNSAddress2 | 1.3.6.1.4.1.2637.2.2.1318.1.405 | INTEGER | read-only | Second DNS address passed to remote user |
| pppSessionStatsEntry | 1.3.6.1.4.1.2637.2.2.1318.1 | not-accessible | This is the structure of entries in the pppSessionStatsTable. | |
| INT pppSessionStatsInactivityLimit | 1.3.6.1.4.1.2637.2.2.1318.1.7 | INTEGER | read-only | Inactivity time (in seconds) allowed before disconnecting |
| INT pppSessionStatsInactivityRemaining | 1.3.6.1.4.1.2637.2.2.1318.1.8 | INTEGER | read-only | Time (in seconds) before disconnection due to inactivity |
| INT pppSessionStatsInterfaceType | 1.3.6.1.4.1.2637.2.2.1318.1.101 | INTEGER | read-only | Interface type (modem, ISDN, etc.) |
| INT pppSessionStatsIPCPState | 1.3.6.1.4.1.2637.2.2.1318.1.401 | INTEGER | read-only | State of IP Control Protocol negotiation |
| INT pppSessionStatsIPXCPState | 1.3.6.1.4.1.2637.2.2.1318.1.451 | INTEGER | read-only | State of IPX Control Protocol negotiation |
| INT pppSessionStatsLCPState | 1.3.6.1.4.1.2637.2.2.1318.1.201 | INTEGER | read-only | State of Link Control Protocol negotiation |
| INT pppSessionStatsLocalACCM | 1.3.6.1.4.1.2637.2.2.1318.1.210 | INTEGER | read-only | ACCM negotiated by local LCP |
| BOO pppSessionStatsLocalACFC | 1.3.6.1.4.1.2637.2.2.1318.1.208 | Boolean | read-only | Address and Control Field Compression negotiated by local LCP |
| INT pppSessionStatsLocalAuthProtocol | 1.3.6.1.4.1.2637.2.2.1318.1.204 | INTEGER | read-only | Authentication protocol negotiated by local LCP |
| INT pppSessionStatsLocalCompressAlgorithm | 1.3.6.1.4.1.2637.2.2.1318.1.502 | INTEGER | read-only | Compression algorithm negotiated by local CCP, and thus the algorithm used when the CVX decompresses data. |
| INT pppSessionStatsLocalCompressHistories | 1.3.6.1.4.1.2637.2.2.1318.1.503 | INTEGER | read-only | Number of compression histories negotiated by local CCP |
| INT pppSessionStatsLocalIPAddress | 1.3.6.1.4.1.2637.2.2.1318.1.402 | INTEGER | read-only | Local IP address |
| INT pppSessionStatsLocalMRRU | 1.3.6.1.4.1.2637.2.2.1318.1.212 | INTEGER | read-only | MRRU negotiated by local LCP |
| INT pppSessionStatsLocalMRU | 1.3.6.1.4.1.2637.2.2.1318.1.202 | INTEGER | read-only | MRU negotiated by local LCP |
| BOO pppSessionStatsLocalPFC | 1.3.6.1.4.1.2637.2.2.1318.1.206 | Boolean | read-only | Protocol Field Compression negotiated by local LCP |
| BOO pppSessionStatsLocalShortSeq | 1.3.6.1.4.1.2637.2.2.1318.1.214 | Boolean | read-only | MLP short sequence numbers negotiated by local LCP |
| BOO pppSessionStatsLocalVJ | 1.3.6.1.4.1.2637.2.2.1318.1.408 | Boolean | read-only | VJ header compression negotiated by local IPCP |
| INT pppSessionStatsLocalVJSlots | 1.3.6.1.4.1.2637.2.2.1318.1.409 | INTEGER | read-only | Number of VJ slots negotiated by local IPCP |
| INT pppSessionStatsMLPFragmentsDropped | 1.3.6.1.4.1.2637.2.2.1318.1.607 | INTEGER | read-only | Total number of multilink fragments received, but dropped |
| INT pppSessionStatsMLPFragmentsMissing | 1.3.6.1.4.1.2637.2.2.1318.1.606 | INTEGER | read-only | Number of times a missing multilink fragment was detected. |
| INT pppSessionStatsMLPFragmentsReceived | 1.3.6.1.4.1.2637.2.2.1318.1.605 | INTEGER | read-only | Total number of multilink fragments received |
| INT pppSessionStatsMLPPacketsNull | 1.3.6.1.4.1.2637.2.2.1318.1.609 | INTEGER | read-only | Total number of 0-length packets reassembled |
| INT pppSessionStatsMLPPacketsReassembled | 1.3.6.1.4.1.2637.2.2.1318.1.608 | INTEGER | read-only | Total number of packets reassembled from multilink fragments |
| BOO pppSessionStatsMultilinkActive | 1.3.6.1.4.1.2637.2.2.1318.1.601 | Boolean | read-only | Multilink active |
| INT pppSessionStatsMultilinkLinks | 1.3.6.1.4.1.2637.2.2.1318.1.602 | INTEGER | read-only | Number of links in multilink bundle. 0 if multilink is not active. |
| INT pppSessionStatsMultilinkLinksAdded | 1.3.6.1.4.1.2637.2.2.1318.1.610 | INTEGER | read-only | Number of links added to multilink bundle over the bundle's life |
| INT pppSessionStatsMultilinkLinksMax | 1.3.6.1.4.1.2637.2.2.1318.1.612 | INTEGER | read-only | Maximum number of links ever in multilink bundle |
| INT pppSessionStatsMultilinkLinksMaxConfig | 1.3.6.1.4.1.2637.2.2.1318.1.613 | INTEGER | read-only | Maximum number of links allowed in multilink bundle |
| INT pppSessionStatsMultilinkLinksRemoved | 1.3.6.1.4.1.2637.2.2.1318.1.611 | INTEGER | read-only | Number of links removed from multilink bundle over the bundle's life |
| INT pppSessionStatsNBNSAddress1 | 1.3.6.1.4.1.2637.2.2.1318.1.406 | INTEGER | read-only | First NBNS address passed to remote user |
| INT pppSessionStatsNBNSAddress2 | 1.3.6.1.4.1.2637.2.2.1318.1.407 | INTEGER | read-only | Second NBNS address passed to remote user |
| INT pppSessionStatsPhase | 1.3.6.1.4.1.2637.2.2.1318.1.2 | INTEGER | read-only | Current PPP phase |
| INT pppSessionStatsRemainingTime | 1.3.6.1.4.1.2637.2.2.1318.1.6 | INTEGER | read-only | Time (in seconds) remaining. -1 indicates umlimited time. |
| INT pppSessionStatsRemoteACCM | 1.3.6.1.4.1.2637.2.2.1318.1.211 | INTEGER | read-only | ACCM negotiated by remote LCP |
| BOO pppSessionStatsRemoteACFC | 1.3.6.1.4.1.2637.2.2.1318.1.209 | Boolean | read-only | Address and Control Field Compression negotiated by remote LCP |
| BOO pppSessionStatsRemoteAuthenticated | 1.3.6.1.4.1.2637.2.2.1318.1.301 | Boolean | read-only | Remote user has been authenticated |
| INT pppSessionStatsRemoteAuthProtocol | 1.3.6.1.4.1.2637.2.2.1318.1.205 | INTEGER | read-only | Authentication protocol negotiated by remote LCP |
| INT pppSessionStatsRemoteCompressAlgorithm | 1.3.6.1.4.1.2637.2.2.1318.1.504 | INTEGER | read-only | Compression algorithm negotiated by remote CCP, and thus the algorithm used when the CVX compresses data. |
| INT pppSessionStatsRemoteCompressHistories | 1.3.6.1.4.1.2637.2.2.1318.1.505 | INTEGER | read-only | Number of compression histories negotiated by remote CCP |
| INT pppSessionStatsRemoteIPAddress | 1.3.6.1.4.1.2637.2.2.1318.1.403 | INTEGER | read-only | IP address assigned to remote user |
| INT pppSessionStatsRemoteIPXNetwork | 1.3.6.1.4.1.2637.2.2.1318.1.452 | INTEGER | read-only | Remote IPX Network number |
| STR pppSessionStatsRemoteIPXNode | 1.3.6.1.4.1.2637.2.2.1318.1.453 | DisplayString | read-only | Remote IPX Node number |
| INT pppSessionStatsRemoteMRRU | 1.3.6.1.4.1.2637.2.2.1318.1.213 | INTEGER | read-only | MRRU negotiated by remote LCP |
| INT pppSessionStatsRemoteMRU | 1.3.6.1.4.1.2637.2.2.1318.1.203 | INTEGER | read-only | MRU negotiated by remote LCP |
| BOO pppSessionStatsRemotePFC | 1.3.6.1.4.1.2637.2.2.1318.1.207 | Boolean | read-only | Protocol Field Compression negotiated by remote LCP |
| BOO pppSessionStatsRemoteShortSeq | 1.3.6.1.4.1.2637.2.2.1318.1.215 | Boolean | read-only | MLP short sequence numbers negotiated by remote LCP |
| BOO pppSessionStatsRemoteVJ | 1.3.6.1.4.1.2637.2.2.1318.1.410 | Boolean | read-only | VJ header compression negotiated by remote IPCP |
| INT pppSessionStatsRemoteVJSlots | 1.3.6.1.4.1.2637.2.2.1318.1.411 | INTEGER | read-only | Number of VJ slots negotiated by remote IPCP |
| INT pppSessionStatsRxAbortErrors | 1.3.6.1.4.1.2637.2.2.1318.1.1204 | INTEGER | read-only | Total number of receives aborted |
| INT pppSessionStatsRxAlignErrors | 1.3.6.1.4.1.2637.2.2.1318.1.1208 | INTEGER | read-only | Total number of receives dropped due to mis-alignment |
| INT pppSessionStatsRxBigErrors | 1.3.6.1.4.1.2637.2.2.1318.1.1206 | INTEGER | read-only | Total number of receives that were too large |
| INT pppSessionStatsRxBytes | 1.3.6.1.4.1.2637.2.2.1318.1.1006 | INTEGER | read-only | Total number of protocol bytes received |
| INT pppSessionStatsRxBytesAfterCompress | 1.3.6.1.4.1.2637.2.2.1318.1.1106 | INTEGER | read-only | Total number of protocol bytes received after compression. 0 if compression was not negotiated |
| INT pppSessionStatsRxBytesBeforeCompress | 1.3.6.1.4.1.2637.2.2.1318.1.1105 | INTEGER | read-only | Total number of protocol bytes received before compression. 0 if compression was not negotiated |
| INT pppSessionStatsRxBytesUncompressed | 1.3.6.1.4.1.2637.2.2.1318.1.1107 | INTEGER | read-only | Total number of protocol bytes received without compression. This occurs when compression causes the data to grow instead of shrink. 0 if compression was not negotiated |
| INT pppSessionStatsRxCompPacketsDropped | 1.3.6.1.4.1.2637.2.2.1318.1.1108 | INTEGER | read-only | Number of compressed packets received but dropped (due to invalid sequence number, data corruption, etc.) |
| INT pppSessionStatsRxCRCErrors | 1.3.6.1.4.1.2637.2.2.1318.1.1203 | INTEGER | read-only | Total number of receives dropped due to invalid CRC |
| INT pppSessionStatsRxOverrunErrors | 1.3.6.1.4.1.2637.2.2.1318.1.1205 | INTEGER | read-only | Total number of receives dropped due to overruns |
| INT pppSessionStatsRxPackets | 1.3.6.1.4.1.2637.2.2.1318.1.1004 | INTEGER | read-only | Number of protocol packets received |
| INT pppSessionStatsRxPacketsDropped | 1.3.6.1.4.1.2637.2.2.1318.1.1005 | INTEGER | read-only | Number of protocol packets not received (out of resources, queue limit reached, etc.) |
| INT pppSessionStatsRxQueueErrors | 1.3.6.1.4.1.2637.2.2.1318.1.1202 | INTEGER | read-only | Total number of receives dropped due to queue depth |
| INT pppSessionStatsRxResourceErrors | 1.3.6.1.4.1.2637.2.2.1318.1.1201 | INTEGER | read-only | Total number of receives dropped due to lack of a buffer |
| INT pppSessionStatsRxSmallErrors | 1.3.6.1.4.1.2637.2.2.1318.1.1207 | INTEGER | read-only | Total number of receives that were too small |
| INT pppSessionStatsRxSpeed | 1.3.6.1.4.1.2637.2.2.1318.1.103 | INTEGER | read-only | Transmit speed in bits per second |
| INT pppSessionStatsSessionID | 1.3.6.1.4.1.2637.2.2.1318.1.1 | INTEGER | read-only | System session ID |
| pppSessionStatsTable | 1.3.6.1.4.1.2637.2.2.1318 | not-accessible | PPP session stats table. | |
| INT pppSessionStatsTotalRxSpeed | 1.3.6.1.4.1.2637.2.2.1318.1.604 | INTEGER | read-only | Sum of receive speeds on all links in multilink bundle. 0 if multilink is not active |
| INT pppSessionStatsTotalTxSpeed | 1.3.6.1.4.1.2637.2.2.1318.1.603 | INTEGER | read-only | Sum of transmit speeds on all links in multilink bundle. 0 if multilink is not active |
| INT pppSessionStatsTxBigErrors | 1.3.6.1.4.1.2637.2.2.1318.1.1211 | INTEGER | read-only | Total number of transmits that were too large |
| INT pppSessionStatsTxBytes | 1.3.6.1.4.1.2637.2.2.1318.1.1003 | INTEGER | read-only | Total number of protocol bytes transmitted |
| INT pppSessionStatsTxBytesAfterCompress | 1.3.6.1.4.1.2637.2.2.1318.1.1103 | INTEGER | read-only | Total number of protocol bytes transmitted after compression. 0 if compression was not negotiated |
| INT pppSessionStatsTxBytesBeforeCompress | 1.3.6.1.4.1.2637.2.2.1318.1.1102 | INTEGER | read-only | Total number of protocol bytes transmitted before compression. 0 if compression was not negotiated |
| INT pppSessionStatsTxBytesUncompressed | 1.3.6.1.4.1.2637.2.2.1318.1.1104 | INTEGER | read-only | Total number of protocol bytes transmitted without compression. This occurs when compression causes the data to grow instead of shrink. 0 if compression was not negotiated |
| BOO pppSessionStatsTxCompressing | 1.3.6.1.4.1.2637.2.2.1318.1.1101 | Boolean | read-only | Compression of transmitted frames is enabled in configuration |
| INT pppSessionStatsTxPackets | 1.3.6.1.4.1.2637.2.2.1318.1.1001 | INTEGER | read-only | Number of protocol packets transmitted |
| INT pppSessionStatsTxPacketsDropped | 1.3.6.1.4.1.2637.2.2.1318.1.1002 | INTEGER | read-only | Number of protocol packets not transmitted (out of resources, queue limit reached, etc.) |
| INT pppSessionStatsTxQueueErrors | 1.3.6.1.4.1.2637.2.2.1318.1.1210 | INTEGER | read-only | Total number of transmits dropped due to queue depth |
| INT pppSessionStatsTxResourceErrors | 1.3.6.1.4.1.2637.2.2.1318.1.1209 | INTEGER | read-only | Total number of transmits dropped due to lack of a buffer |
| INT pppSessionStatsTxSpeed | 1.3.6.1.4.1.2637.2.2.1318.1.102 | INTEGER | read-only | Transmit speed in bits per second |
| INT pppSessionStatsTxUnderrunErrors | 1.3.6.1.4.1.2637.2.2.1318.1.1212 | INTEGER | read-only | Total number of transmits dropped due to underruns |
| INT pppSessionStatsUpTime | 1.3.6.1.4.1.2637.2.2.1318.1.4 | INTEGER | read-only | Time (in seconds) session has been connected |
| STR pppSessionStatsUserName | 1.3.6.1.4.1.2637.2.2.1318.1.3 | DisplayString | read-only | User name |
| INT pppSummaryStatsActiveLinks | 1.3.6.1.4.1.2637.2.2.1319.1.3 | INTEGER | read-only | Number of PPP links currently active |
| pppSummaryStatsEntry | 1.3.6.1.4.1.2637.2.2.1319.1 | not-accessible | This is the structure of entries in the pppSummaryStatsTable. | |
| INT pppSummaryStatsFreeLinks | 1.3.6.1.4.1.2637.2.2.1319.1.5 | INTEGER | read-only | Number of PPP links currently available |
| INT pppSummaryStatsLinksAuthenticated | 1.3.6.1.4.1.2637.2.2.1319.1.202 | INTEGER | read-only | Number of PPP links that have successfully authenticated |
| INT pppSummaryStatsLinksHDLC | 1.3.6.1.4.1.2637.2.2.1319.1.102 | INTEGER | read-only | Number of PPP links that have been on an ISDN B-channel (HDLC) |
| INT pppSummaryStatsLinksLeased | 1.3.6.1.4.1.2637.2.2.1319.1.103 | INTEGER | read-only | Number of PPP links that have been on a leased line |
| INT pppSummaryStatsLinksModem | 1.3.6.1.4.1.2637.2.2.1319.1.101 | INTEGER | read-only | Number of PPP links that have been on a modem |
| INT pppSummaryStatsLinksNegotiatedCCP | 1.3.6.1.4.1.2637.2.2.1319.1.205 | INTEGER | read-only | Number of PPP links that have successfully negotiated compression |
| INT pppSummaryStatsLinksNegotiatedIPCP | 1.3.6.1.4.1.2637.2.2.1319.1.203 | INTEGER | read-only | Number of PPP links that have successfully negotiated IPCP |
| INT pppSummaryStatsLinksNegotiatedIPXCP | 1.3.6.1.4.1.2637.2.2.1319.1.206 | INTEGER | read-only | Number of PPP links that have successfully negotiated IPXCP |
| INT pppSummaryStatsLinksNegotiatedLCP | 1.3.6.1.4.1.2637.2.2.1319.1.201 | INTEGER | read-only | Number of PPP links that have successfully negotiated LCP |
| INT pppSummaryStatsLinksNegotiatedMLP | 1.3.6.1.4.1.2637.2.2.1319.1.204 | INTEGER | read-only | Number of PPP links that have successfully negotiated multilink |
| INT pppSummaryStatsLinksStarted | 1.3.6.1.4.1.2637.2.2.1319.1.6 | INTEGER | read-only | Number of PPP links that have been started |
| INT pppSummaryStatsLinksStopped | 1.3.6.1.4.1.2637.2.2.1319.1.7 | INTEGER | read-only | Number of PPP links that have been stopped |
| INT pppSummaryStatsMaxActiveLinks | 1.3.6.1.4.1.2637.2.2.1319.1.4 | INTEGER | read-only | Maximum number of PPP links active simultaneously |
| INT pppSummaryStatsMaxLinks | 1.3.6.1.4.1.2637.2.2.1319.1.2 | INTEGER | read-only | Number of simultaneous PPP links supported |
| INT pppSummaryStatsSlotNumber | 1.3.6.1.4.1.2637.2.2.1319.1.1 | INTEGER | read-only | Number of slot reporting these stats |
| pppSummaryStatsTable | 1.3.6.1.4.1.2637.2.2.1319 | not-accessible | PPP summary stats table. | |
| INT sessionComponentsComponentState | 1.3.6.1.4.1.2637.2.2.213.1.4 | INTEGER | read-only | A number indicating the current state of the component participating in the session. Note that this is really an enum with different values, depending upon which component is being reported. |
| INT sessionComponentsComponentType | 1.3.6.1.4.1.2637.2.2.213.1.3 | INTEGER | read-only | A component participating in the session. |
| sessionComponentsEntry | 1.3.6.1.4.1.2637.2.2.213.1 | not-accessible | This is the structure of entries in the sessionComponentsTable. | |
| INT sessionComponentsIndex | 1.3.6.1.4.1.2637.2.2.213.1.2 | INTEGER | read-only | The ordinal number representing the relative location of this component in relation to other components within a session. |
| INT sessionComponentsSessionIndex | 1.3.6.1.4.1.2637.2.2.213.1.1 | INTEGER | read-only | The serial number of the session to which this component belongs. |
| INT sessionComponentsStatHandle | 1.3.6.1.4.1.2637.2.2.213.1.5 | INTEGER | read-only | A number which may be used to retrieve the statistics for this component. |
| sessionComponentsTable | 1.3.6.1.4.1.2637.2.2.213 | not-accessible | Session Components Information. | |
| INT sessionCountersActiveCount | 1.3.6.1.4.1.2637.2.2.100.1.3 | INTEGER | read-only | The current count of entries in the active session table. |
| INT sessionCountersActiveHighest | 1.3.6.1.4.1.2637.2.2.100.1.2 | INTEGER | read-only | The current highest ID in the active session table. |
| INT sessionCountersActiveLowest | 1.3.6.1.4.1.2637.2.2.100.1.1 | INTEGER | read-only | The current lowest ID in the active session table. |
| INT sessionCountersBootEra | 1.3.6.1.4.1.2637.2.2.100.1.10 | INTEGER | read-only | A number identifying the boot era for this system. This number will be set to a unique value each time the system is rebooted. This variable will not change until the System Controller Card (SCC) is rebooted. When prepended to a session serial number, yields a session identifier which will be unique for this system for all time. |
| sessionCountersEntry | 1.3.6.1.4.1.2637.2.2.100.1 | not-accessible | This is the structure of entries in the sessionCountersTable. | |
| INT sessionCountersHistoryHighest | 1.3.6.1.4.1.2637.2.2.100.1.9 | INTEGER | read-only | The current highest index in the SessionHistory table. |
| INT sessionCountersHistoryLowest | 1.3.6.1.4.1.2637.2.2.100.1.8 | INTEGER | read-only | The current lowest index in the SessionHistory table. |
| INT sessionCountersHistoryTableSize | 1.3.6.1.4.1.2637.2.2.100.1.11 | INTEGER | read-only | The maximum number of entries that the history table may hold. |
| INT sessionCountersInactiveCount | 1.3.6.1.4.1.2637.2.2.100.1.6 | INTEGER | read-only | The current count of entries in the Inactive session table. |
| INT sessionCountersInactiveHighest | 1.3.6.1.4.1.2637.2.2.100.1.5 | INTEGER | read-only | The current highest ID in the Inactive session table. |
| INT sessionCountersInactiveLowest | 1.3.6.1.4.1.2637.2.2.100.1.4 | INTEGER | read-only | The current lowest ID in the Inactive session table. |
| INT sessionCountersSessionTableSize | 1.3.6.1.4.1.2637.2.2.100.1.7 | INTEGER | read-only | The maximum number of entries in the session table. |
| sessionCountersTable | 1.3.6.1.4.1.2637.2.2.100 | not-accessible | The current count of sessions in the active and inactive tables. | |
| INT sessionDiscCauseCause | 1.3.6.1.4.1.2637.2.2.104.1.3 | INTEGER | read-only | The cause which initiated termination of this session. In cases where there are multiple causes of session termination, only the first cause detected is reported. |
| INT sessionDiscCauseComponent | 1.3.6.1.4.1.2637.2.2.104.1.2 | INTEGER | read-only | The component which initiated termination of this session. In cases where there are multiple causes of session termination, only the first cause detected is reported. |
| INT sessionDiscCauseCount | 1.3.6.1.4.1.2637.2.2.104.1.5 | INTEGER | read-only | The number of times this component/cause has resulted in session termination. |
| sessionDiscCauseEntry | 1.3.6.1.4.1.2637.2.2.104.1 | not-accessible | This is the structure of entries in the sessionDiscCauseTable. | |
| INT sessionDiscCauseIndex | 1.3.6.1.4.1.2637.2.2.104.1.1 | INTEGER | read-only | An index into the table of disconnect causes. |
| STR sessionDiscCauseReason | 1.3.6.1.4.1.2637.2.2.104.1.4 | DisplayString | read-only | A textual description of the cause which initiated termination of this session. In cases where there are multiple causes of session termination, only the first cause detected is reported. |
| sessionDiscCauseTable | 1.3.6.1.4.1.2637.2.2.104 | not-accessible | Session Disconnect Cause Information. | |
| sessionMultilinkEntry | 1.3.6.1.4.1.2637.2.2.217.1 | not-accessible | This is the structure of entries in the sessionMultilinkTable. | |
| STR sessionMultilinkMyEIDData | 1.3.6.1.4.1.2637.2.2.217.1.13 | DisplayString | read-only | EID data I negotiated (if any). |
| INT sessionMultilinkMyEIDLength | 1.3.6.1.4.1.2637.2.2.217.1.11 | INTEGER | read-only | Length of my EID data (0 means not negotiated). |
| INT sessionMultilinkMyEIDType | 1.3.6.1.4.1.2637.2.2.217.1.9 | INTEGER | read-only | EID type I negotiated (0 means not negotiated). |
| INT sessionMultilinkMyMRRU | 1.3.6.1.4.1.2637.2.2.217.1.5 | INTEGER | read-only | MRRU value I negotiated (0 means not negotiated). |
| INT sessionMultilinkMyShortSequence | 1.3.6.1.4.1.2637.2.2.217.1.7 | INTEGER | read-only | 1 if I negotiated short sequence #, 0 if not. |
| INT sessionMultilinkNameLength | 1.3.6.1.4.1.2637.2.2.217.1.3 | INTEGER | read-only | Length of authenticated user's name (0 means no authentication). |
| INT sessionMultilinkNegotiated | 1.3.6.1.4.1.2637.2.2.217.1.1 | INTEGER | read-only | The serial number of this session, a unique number for this boot era. When combined with the value of BootEra, provides a session number that is unique for the life of the system. |
| STR sessionMultilinkPeerEIDData | 1.3.6.1.4.1.2637.2.2.217.1.14 | DisplayString | read-only | EID data peer negotiated (if any). |
| INT sessionMultilinkPeerEIDLength | 1.3.6.1.4.1.2637.2.2.217.1.12 | INTEGER | read-only | Length of peer's EID data (0 means not negotiated). |
| INT sessionMultilinkPeerEIDType | 1.3.6.1.4.1.2637.2.2.217.1.10 | INTEGER | read-only | EID type peer negotiated (0 means not negotiated). |
| INT sessionMultilinkPeerMRRU | 1.3.6.1.4.1.2637.2.2.217.1.6 | INTEGER | read-only | MRRU value the peer negotiated (0 means not negotiated). |
| INT sessionMultilinkPeerShortSequence | 1.3.6.1.4.1.2637.2.2.217.1.8 | INTEGER | read-only | 1 if peer negotiated short sequence #, 0 if not. |
| INT sessionMultilinkSessionId | 1.3.6.1.4.1.2637.2.2.217.1.2 | INTEGER | read-only | The serial number of this session, a unique number for this boot era. When combined with the value of BootEra, provides a session number that is unique for the life of the system. |
| sessionMultilinkTable | 1.3.6.1.4.1.2637.2.2.217 | not-accessible | Session Multilink Configuration Information. | |
| STR sessionMultilinkUserName | 1.3.6.1.4.1.2637.2.2.217.1.4 | DisplayString | read-only | User's name (null-terminated, null not included in length). |
| sessionSlotsEntry | 1.3.6.1.4.1.2637.2.2.215.1 | not-accessible | This is the structure of entries in the sessionSlotsTable. | |
| INT sessionSlotsSlot10Count | 1.3.6.1.4.1.2637.2.2.215.1.11 | INTEGER | read-only | The number of sessions active on slot 10. |
| INT sessionSlotsSlot11Count | 1.3.6.1.4.1.2637.2.2.215.1.12 | INTEGER | read-only | The number of sessions active on slot 11. |
| INT sessionSlotsSlot12Count | 1.3.6.1.4.1.2637.2.2.215.1.13 | INTEGER | read-only | The number of sessions active on slot 12. |
| INT sessionSlotsSlot13Count | 1.3.6.1.4.1.2637.2.2.215.1.14 | INTEGER | read-only | The number of sessions active on slot 13. |
| INT sessionSlotsSlot14Count | 1.3.6.1.4.1.2637.2.2.215.1.15 | INTEGER | read-only | The number of sessions active on slot 14. |
| INT sessionSlotsSlot15Count | 1.3.6.1.4.1.2637.2.2.215.1.16 | INTEGER | read-only | The number of sessions active on slot 15. |
| INT sessionSlotsSlot16Count | 1.3.6.1.4.1.2637.2.2.215.1.17 | INTEGER | read-only | The number of sessions active on slot 16. |
| INT sessionSlotsSlot17Count | 1.3.6.1.4.1.2637.2.2.215.1.18 | INTEGER | read-only | The number of sessions active on slot 17. |
| INT sessionSlotsSlot18Count | 1.3.6.1.4.1.2637.2.2.215.1.19 | INTEGER | read-only | The number of sessions active on slot 18. |
| INT sessionSlotsSlot1Count | 1.3.6.1.4.1.2637.2.2.215.1.2 | INTEGER | read-only | The number of sessions active on slot 1. |
| INT sessionSlotsSlot2Count | 1.3.6.1.4.1.2637.2.2.215.1.3 | INTEGER | read-only | The number of sessions active on slot 2. |
| INT sessionSlotsSlot3Count | 1.3.6.1.4.1.2637.2.2.215.1.4 | INTEGER | read-only | The number of sessions active on slot 3. |
| INT sessionSlotsSlot4Count | 1.3.6.1.4.1.2637.2.2.215.1.5 | INTEGER | read-only | The number of sessions active on slot 4. |
| INT sessionSlotsSlot5Count | 1.3.6.1.4.1.2637.2.2.215.1.6 | INTEGER | read-only | The number of sessions active on slot 5. |
| INT sessionSlotsSlot6Count | 1.3.6.1.4.1.2637.2.2.215.1.7 | INTEGER | read-only | The number of sessions active on slot 6. |
| INT sessionSlotsSlot7Count | 1.3.6.1.4.1.2637.2.2.215.1.8 | INTEGER | read-only | The number of sessions active on slot 7. |
| INT sessionSlotsSlot8Count | 1.3.6.1.4.1.2637.2.2.215.1.9 | INTEGER | read-only | The number of sessions active on slot 8. |
| INT sessionSlotsSlot9Count | 1.3.6.1.4.1.2637.2.2.215.1.10 | INTEGER | read-only | The number of sessions active on slot 9. |
| sessionSlotsTable | 1.3.6.1.4.1.2637.2.2.215 | not-accessible | The current usage of cvx slots in all active sessions. | |
| INT sessionSlotsTrunkCount | 1.3.6.1.4.1.2637.2.2.215.1.1 | INTEGER | read-only | The number of sessions active on slot 1. |
| INT sessionStatusActiveActualAuthMethod | 1.3.6.1.4.1.2637.2.2.102.1.66 | INTEGER | read-only | The actual authentication method which was used to gain access to services. Radius, Local, Remote. |
| INT sessionStatusActiveCallClass | 1.3.6.1.4.1.2637.2.2.102.1.61 | INTEGER | read-only | The class of this call. |
| OCT sessionStatusActiveCallClassArray | 1.3.6.1.4.1.2637.2.2.102.1.64 | OCTET STRING | read-only | An array of octets representing the class of this call. |
| INT sessionStatusActiveCallClassLen | 1.3.6.1.4.1.2637.2.2.102.1.65 | INTEGER | read-only | The number of octets in callClassArray. |
| STR sessionStatusActiveCalledNumber | 1.3.6.1.4.1.2637.2.2.102.1.28 | DisplayString | read-only | 16 digit number of called station (if available) |
| STR sessionStatusActiveCallingNumber | 1.3.6.1.4.1.2637.2.2.102.1.29 | DisplayString | read-only | 16 digit number of calling station (if available) |
| IP sessionStatusActiveCleartcpRemoteIP | 1.3.6.1.4.1.2637.2.2.102.1.80 | IpAddress | read-only | Cleartcp Remote IP Address |
| INT sessionStatusActiveCleartcpRemotePort | 1.3.6.1.4.1.2637.2.2.102.1.81 | INTEGER | read-only | Cleartcp Remote Port Address |
| INT sessionStatusActiveDevice | 1.3.6.1.4.1.2637.2.2.102.1.50 | INTEGER | read-only | The modem/hdlc where this session is terminated. |
| INT sessionStatusActiveDmm | 1.3.6.1.4.1.2637.2.2.102.1.48 | INTEGER | read-only | The Digital Modem Module where this session is terminated. |
| INT sessionStatusActiveDuration | 1.3.6.1.4.1.2637.2.2.102.1.54 | INTEGER | read-only | The number of seconds this session has been active. |
| STR sessionStatusActiveDurationHMS | 1.3.6.1.4.1.2637.2.2.102.1.55 | DisplayString | read-only | The length of time this session has been active, expressed in DDD HH:MM:SSS.000. |
| sessionStatusActiveEntry | 1.3.6.1.4.1.2637.2.2.102.1 | not-accessible | This is the structure of entries in the sessionStatusActiveTable. | |
| INT sessionStatusActiveIop | 1.3.6.1.4.1.2637.2.2.102.1.47 | INTEGER | read-only | The I/O processor where this session is terminated. |
| INT sessionStatusActiveLastComponent | 1.3.6.1.4.1.2637.2.2.102.1.25 | INTEGER | read-only | The last component which was connected in this session. |
| INT sessionStatusActiveLayer1Slot | 1.3.6.1.4.1.2637.2.2.102.1.26 | INTEGER | read-only | The slot where the physical layer of this session is terminated. |
| INT sessionStatusActiveLayer2Slot | 1.3.6.1.4.1.2637.2.2.102.1.27 | INTEGER | read-only | The slot where the data link portion of this session is terminated |
| INT sessionStatusActiveLinkCount | 1.3.6.1.4.1.2637.2.2.102.1.38 | INTEGER | read-only | The number of sessions sharing the same remote IP address as this session. After a session is terminated, this value will represent the number of sessions at the time of termination. |
| INT sessionStatusActiveLinkId | 1.3.6.1.4.1.2637.2.2.102.1.83 | INTEGER | read-only | Link Id |
| INT sessionStatusActiveLinkService | 1.3.6.1.4.1.2637.2.2.102.1.17 | INTEGER | read-only | A description of which link technology is being used by the session. |
| IP sessionStatusActiveLocalIP | 1.3.6.1.4.1.2637.2.2.102.1.15 | IpAddress | read-only | The local IP address for this session. If the link is numbered, then this is the address assigned to the local end of the link. If the link is not numbered, this may be the primary IP address of the system. For PPP connections, this is the result of IPNCP negotiation. |
| IP sessionStatusActiveLocalIPMask | 1.3.6.1.4.1.2637.2.2.102.1.16 | IpAddress | read-only | The local IP address mask for this session, used in conjunction with localIP. |
| INT sessionStatusActiveModemDataCompression | 1.3.6.1.4.1.2637.2.2.102.1.69 | INTEGER | read-only | For modem sessions, the data compression protocol used, if any. |
| INT sessionStatusActiveModemErrorCorrection | 1.3.6.1.4.1.2637.2.2.102.1.68 | INTEGER | read-only | For modem sessions, the error correction protocol used, if any. |
| INT sessionStatusActiveModemLocalRenegotiations | 1.3.6.1.4.1.2637.2.2.102.1.75 | INTEGER | read-only | For modem sessions, the number of rate renegotiation requests sent by the local modem. |
| INT sessionStatusActiveModemLocalRetrains | 1.3.6.1.4.1.2637.2.2.102.1.73 | INTEGER | read-only | For modem sessions, the number of retrain requests sent by the local modem. |
| INT sessionStatusActiveModemModulation | 1.3.6.1.4.1.2637.2.2.102.1.67 | INTEGER | read-only | For modem sessions, the modulation protocol used, if any. |
| INT sessionStatusActiveModemNumber | 1.3.6.1.4.1.2637.2.2.102.1.57 | INTEGER | read-only | The individual modem where this session is terminated, numbered from one to the maximum number of modems on the slot card. |
| INT sessionStatusActiveModemReceiveLineLevel | 1.3.6.1.4.1.2637.2.2.102.1.77 | INTEGER | read-only | For modem sessions, the receive line signal level. This value is given in dB. |
| INT sessionStatusActiveModemRemoteRenegotiations | 1.3.6.1.4.1.2637.2.2.102.1.76 | INTEGER | read-only | For modem sessions, the number of rate renegotiation requests sent by the remote modem. |
| INT sessionStatusActiveModemRemoteRetrains | 1.3.6.1.4.1.2637.2.2.102.1.74 | INTEGER | read-only | For modem sessions, the number of retrain requests sent by the remote modem. |
| INT sessionStatusActiveModemRetransmits | 1.3.6.1.4.1.2637.2.2.102.1.71 | INTEGER | read-only | For modem sessions, the number of packets retransmitted by the modem. |
| INT sessionStatusActiveModemSNR | 1.3.6.1.4.1.2637.2.2.102.1.72 | INTEGER | read-only | For modem sessions, the Signal-to-Noise Ratio measured at the start of the connection. This value is given in dB. |
| INT sessionStatusActiveModemTxBlocks | 1.3.6.1.4.1.2637.2.2.102.1.70 | INTEGER | read-only | For modem sessions, the number of blocks transmitted by the modem. |
| INT sessionStatusActiveMultiLinkId | 1.3.6.1.4.1.2637.2.2.102.1.35 | INTEGER | read-only | The multi-link identifier value for PPP calls where the multi-link protocol was negotiated. |
| STR sessionStatusActiveName | 1.3.6.1.4.1.2637.2.2.102.1.12 | DisplayString | read-only | The name of the connection peer for this session. During authentication of the session, this field may contain the name submitted by the peer. During this time, the value of timeOfService will be zero. When the value of timeOfService is nonzero, this field will contain a fully authenticated name. |
| INT sessionStatusActiveOctetsIn | 1.3.6.1.4.1.2637.2.2.102.1.31 | INTEGER | read-only | The number of octets received from the remote user. This value will be zero until a session is terminated. |
| INT sessionStatusActiveOctetsOut | 1.3.6.1.4.1.2637.2.2.102.1.32 | INTEGER | read-only | The number of octets sent to the remote user. This value will be zero until a session is terminated. |
| INT sessionStatusActiveOriginateMode | 1.3.6.1.4.1.2637.2.2.102.1.30 | INTEGER | read-only | The direction of the physical layer call associated with this session |
| INT sessionStatusActivePack | 1.3.6.1.4.1.2637.2.2.102.1.49 | INTEGER | read-only | The integrated circuit pack where this session is terminated. |
| INT sessionStatusActivePacketsIn | 1.3.6.1.4.1.2637.2.2.102.1.33 | INTEGER | read-only | The number of packets received from the remote user. This value will be zero until a session is terminated. |
| INT sessionStatusActivePacketsOut | 1.3.6.1.4.1.2637.2.2.102.1.34 | INTEGER | read-only | The number of packets sent to the remote user. This value will be zero until a session is terminated. |
| INT sessionStatusActivePermanentFlag | 1.3.6.1.4.1.2637.2.2.102.1.10 | INTEGER | read-only | This variable indicates whether this session is permanent(2), meaning a long-lasting locally administered session such as a Frame Relay PVC, or switched(1), meaning a short-lived session resulting from a switched call. |
| INT sessionStatusActivePort | 1.3.6.1.4.1.2637.2.2.102.1.36 | INTEGER | read-only | The number of the DS1 for this session, relative to layer1Slot. |
| IP sessionStatusActiveRemoteIP | 1.3.6.1.4.1.2637.2.2.102.1.13 | IpAddress | read-only | The connection peer's IP address. If the link is numbered, then this is the address assigned to the other end of the link. If the link is not numbered, this may be the single IP address of the peer. For PPP connections, this is the result of IPNCP negotiation. |
| IP sessionStatusActiveRemoteIPMask | 1.3.6.1.4.1.2637.2.2.102.1.14 | IpAddress | read-only | The connection peer's IP address mask, used in conjunction with remoteIP. |
| INT sessionStatusActiveRemoteIPXNetwork | 1.3.6.1.4.1.2637.2.2.102.1.78 | INTEGER | read-only | The IPX network assigned to the dial-up user. |
| STR sessionStatusActiveRemoteIPXNode | 1.3.6.1.4.1.2637.2.2.102.1.79 | DisplayString | read-only | The IPX Node number assisgned to the dial-up user |
| INT sessionStatusActiveRxEndDataRate | 1.3.6.1.4.1.2637.2.2.102.1.42 | INTEGER | read-only | The receive data rate at the end of a modem session. |
| INT sessionStatusActiveRxMaxDataRate | 1.3.6.1.4.1.2637.2.2.102.1.46 | INTEGER | read-only | The maximum receive data rate during a modem session. |
| INT sessionStatusActiveRxMinDataRate | 1.3.6.1.4.1.2637.2.2.102.1.44 | INTEGER | read-only | The minimum receive data rate during a modem session. |
| INT sessionStatusActiveRxStartDataRate | 1.3.6.1.4.1.2637.2.2.102.1.40 | INTEGER | read-only | The receive data rate for this session. In the case of modem sessions, this will be the DCE rate reported as a result of initial modem negotiation, and may not track rate chanes during the call. For ISDN sessions, this will be the actual data service rate of the call. For Frame Relay sessions, this will be the nominal speed of the Frame Relay Physical Interface, even though multiple sessions may be sharing that Physical Interface. For other sessions, this will be the nominal speed of the physical interface. In no case should this be interepreted as a Quality-of-Service guarantee, or as the current line utilization or effective bandwidth on the interface. Note also that in the case of PPP multilink, this specifies the rate of only this link in the bundle, and not the aggregate rate of all links in the bundle. |
| INT sessionStatusActiveServiceMode | 1.3.6.1.4.1.2637.2.2.102.1.18 | INTEGER | read-only | A description of which session service is being used by the session. |
| INT sessionStatusActiveSessionID | 1.3.6.1.4.1.2637.2.2.102.1.2 | INTEGER | read-only | The serial number of this session, a unique number for this boot era. When combined with the value of BootEra, provides a session number that is unique for the life of the system. Note that these are very sparsely numbered. |
| STR sessionStatusActiveSs7SessionId | 1.3.6.1.4.1.2637.2.2.102.1.56 | DisplayString | read-only | A uniquie identifier for this session within the ss7 Network. If this call was not originated using ss7 signalling, this string will be null. |
| INT sessionStatusActiveStartTime | 1.3.6.1.4.1.2637.2.2.102.1.19 | INTEGER | read-only | The time that this session began, in seconds since the system booted. |
| INT sessionStatusActiveState | 1.3.6.1.4.1.2637.2.2.102.1.3 | INTEGER | read-only | This variable indicates the state of this session. |
| INT sessionStatusActiveStopTime | 1.3.6.1.4.1.2637.2.2.102.1.20 | INTEGER | read-only | The time that this session stopped, in seconds since the system booted. This variable is only meaningful for sessions having the state inactive(0). |
| sessionStatusActiveTable | 1.3.6.1.4.1.2637.2.2.102 | not-accessible | This table describes all active sessions. This table is ordered by session serial number. The current bounds of this table at any given time are described by the variables ActiveLowest and ActiveHighest. | |
| INT sessionStatusActiveTandemPort | 1.3.6.1.4.1.2637.2.2.102.1.62 | INTEGER | read-only | The port used for the outbound portion of a tandem call, if applicable. |
| INT sessionStatusActiveTandemTimeslot | 1.3.6.1.4.1.2637.2.2.102.1.63 | INTEGER | read-only | The timeslot used for the outbound portion of a tandem call, if applicable. |
| INT sessionStatusActiveTdmStream | 1.3.6.1.4.1.2637.2.2.102.1.51 | INTEGER | read-only | The TDM highway stream associated with this session. |
| INT sessionStatusActiveTdmTimeSlot | 1.3.6.1.4.1.2637.2.2.102.1.52 | INTEGER | read-only | The TDM highway time-slot associated with this session. |
| INT sessionStatusActiveTerminatingComponent | 1.3.6.1.4.1.2637.2.2.102.1.23 | INTEGER | read-only | The component which initiated termination of this session. In cases where there are multiple causes of session termination, only the first cause detected is reported. This variable is only meaningful for sessions having the state inactive(0). |
| INT sessionStatusActiveTerminationCause | 1.3.6.1.4.1.2637.2.2.102.1.24 | INTEGER | read-only | The cause which initiated termination of this session. In cases where there are multiple causes of session termination, only the first cause detected is reported. This variable is only meaningful for sessions having the state inactive(0). |
| STR sessionStatusActiveTerminationReason | 1.3.6.1.4.1.2637.2.2.102.1.53 | DisplayString | read-only | A textual description of the cause which initiated termination of this session. In cases where there are multiple causes of session termination, only the first cause detected is reported. |
| INT sessionStatusActiveTimeOfModemSync | 1.3.6.1.4.1.2637.2.2.102.1.21 | INTEGER | read-only | The time at which the modem synchronization completed, in seconds since the system booted. |
| INT sessionStatusActiveTimeOfService | 1.3.6.1.4.1.2637.2.2.102.1.22 | INTEGER | read-only | The time that this session entered its first negotiated or configured service, in seconds since the system booted. For example, for a session with serviceMode PPP, the time at which LCP and IPCP negotiations completed and the session was ready to forward user data. |
| INT sessionStatusActiveTimeslot | 1.3.6.1.4.1.2637.2.2.102.1.37 | INTEGER | read-only | The number of the DS0 for this session, relative to port. |
| INT sessionStatusActiveTunnelId | 1.3.6.1.4.1.2637.2.2.102.1.82 | INTEGER | read-only | Tunnel Id |
| INT sessionStatusActiveTunnelMediumType | 1.3.6.1.4.1.2637.2.2.102.1.59 | INTEGER | read-only | The tunneling medium protocol being used for this session. |
| IP sessionStatusActiveTunnelServerAddress | 1.3.6.1.4.1.2637.2.2.102.1.60 | IpAddress | read-only | The IP address of the remote machine terminating the tunnel for this session. |
| INT sessionStatusActiveTunnelType | 1.3.6.1.4.1.2637.2.2.102.1.58 | INTEGER | read-only | The tunneling protocol being used for this session. |
| INT sessionStatusActiveTxEndDataRate | 1.3.6.1.4.1.2637.2.2.102.1.41 | INTEGER | read-only | The transmit data rate at the end of a modem session. |
| INT sessionStatusActiveTxMaxDataRate | 1.3.6.1.4.1.2637.2.2.102.1.45 | INTEGER | read-only | The maximum transmit data rate during a modem session. |
| INT sessionStatusActiveTxMinDataRate | 1.3.6.1.4.1.2637.2.2.102.1.43 | INTEGER | read-only | The minimum transmit data rate during a modem session. |
| INT sessionStatusActiveTxStartDataRate | 1.3.6.1.4.1.2637.2.2.102.1.39 | INTEGER | read-only | The transmit DCE data rate for this session. In the case of modem sessions, this will be the DCE rate reported as a result of initial modem negotiation, and may not track rate chanes during the call. For ISDN sessions, this will be the actual data service rate of the call. For Frame Relay sessions, this will be the nominal speed of the Frame Relay Physical Interface, even though multiple sessions may be sharing that Physical Interface. For other sessions, this will be the nominal speed of the physical interface. In no case should this be interepreted as a Quality-of-Service guarantee, or as the current line utilization or effective bandwidth on the interface. Note also that in the case of PPP multilink, this specifies the rate of only this link in the bundle, and not the aggregate rate of all links in the bundle. |
| INT sessionStatusActiveVpopId | 1.3.6.1.4.1.2637.2.2.102.1.11 | INTEGER | read-only | The identifier of the VPOP (administrative Group) to which the session belongs. A value of 0 indicates the default VPOP. |
| INT sessionStatusActualAuthMethod | 1.3.6.1.4.1.2637.2.2.101.1.66 | INTEGER | read-only | The actual authentication method which was used to gain access to services. Radius, Local, Remote. |
| INT sessionStatusCallClass | 1.3.6.1.4.1.2637.2.2.101.1.61 | INTEGER | read-only | The class of this call. |
| OCT sessionStatusCallClassArray | 1.3.6.1.4.1.2637.2.2.101.1.64 | OCTET STRING | read-only | An array of octets representing the class of this call. |
| INT sessionStatusCallClassLen | 1.3.6.1.4.1.2637.2.2.101.1.65 | INTEGER | read-only | The number of octets in callClassArray. |
| STR sessionStatusCalledNumber | 1.3.6.1.4.1.2637.2.2.101.1.28 | DisplayString | read-only | 16 digit number of called station (if available) |
| STR sessionStatusCallingNumber | 1.3.6.1.4.1.2637.2.2.101.1.29 | DisplayString | read-only | 16 digit number of calling station (if available) |
| IP sessionStatusCleartcpRemoteIP | 1.3.6.1.4.1.2637.2.2.101.1.80 | IpAddress | read-only | Cleartcp Remote IP Address |
| INT sessionStatusCleartcpRemotePort | 1.3.6.1.4.1.2637.2.2.101.1.81 | INTEGER | read-only | Cleartcp Remote Port Address |
| INT sessionStatusDevice | 1.3.6.1.4.1.2637.2.2.101.1.50 | INTEGER | read-only | The modem/hdlc where this session is terminated. |
| INT sessionStatusDmm | 1.3.6.1.4.1.2637.2.2.101.1.48 | INTEGER | read-only | The Digital Modem Module where this session is terminated. |
| INT sessionStatusDuration | 1.3.6.1.4.1.2637.2.2.101.1.54 | INTEGER | read-only | The number of seconds this session has been active. |
| STR sessionStatusDurationHMS | 1.3.6.1.4.1.2637.2.2.101.1.55 | DisplayString | read-only | The length of time this session has been active, expressed in DDD HH:MM:SSS.000. |
| sessionStatusEntry | 1.3.6.1.4.1.2637.2.2.101.1 | not-accessible | This is the structure of entries in the sessionStatusTable. | |
| INT sessionStatusHistoryActualAuthMethod | 1.3.6.1.4.1.2637.2.2.107.1.66 | INTEGER | read-only | The actual authentication method which was used to gain access to services. Radius, Local, Remote. |
| INT sessionStatusHistoryCallClass | 1.3.6.1.4.1.2637.2.2.107.1.61 | INTEGER | read-only | The class of this call. |
| OCT sessionStatusHistoryCallClassArray | 1.3.6.1.4.1.2637.2.2.107.1.64 | OCTET STRING | read-only | An array of octets representing the class of this call. |
| INT sessionStatusHistoryCallClassLen | 1.3.6.1.4.1.2637.2.2.107.1.65 | INTEGER | read-only | The number of octets in callClassArray. |
| STR sessionStatusHistoryCalledNumber | 1.3.6.1.4.1.2637.2.2.107.1.28 | DisplayString | read-only | 16 digit number of called station (if available) |
| STR sessionStatusHistoryCallingNumber | 1.3.6.1.4.1.2637.2.2.107.1.29 | DisplayString | read-only | 16 digit number of calling station (if available) |
| IP sessionStatusHistoryCleartcpRemoteIP | 1.3.6.1.4.1.2637.2.2.107.1.80 | IpAddress | read-only | Cleartcp Remote IP Address |
| INT sessionStatusHistoryCleartcpRemotePort | 1.3.6.1.4.1.2637.2.2.107.1.81 | INTEGER | read-only | Cleartcp Remote Port Address |
| INT sessionStatusHistoryDevice | 1.3.6.1.4.1.2637.2.2.107.1.50 | INTEGER | read-only | The modem/hdlc where this session is terminated. |
| INT sessionStatusHistoryDmm | 1.3.6.1.4.1.2637.2.2.107.1.48 | INTEGER | read-only | The Digital Modem Module where this session is terminated. |
| INT sessionStatusHistoryDuration | 1.3.6.1.4.1.2637.2.2.107.1.54 | INTEGER | read-only | The number of seconds this session has been active. |
| STR sessionStatusHistoryDurationHMS | 1.3.6.1.4.1.2637.2.2.107.1.55 | DisplayString | read-only | The length of time this session has been active, expressed in DDD HH:MM:SSS.000. |
| sessionStatusHistoryEntry | 1.3.6.1.4.1.2637.2.2.107.1 | not-accessible | This is the structure of entries in the sessionStatusHistoryTable. | |
| INT sessionStatusHistoryIndex | 1.3.6.1.4.1.2637.2.2.107.1.1 | INTEGER | read-only | An index into a ring buffer of the last 2000 sessions. |
| INT sessionStatusHistoryIop | 1.3.6.1.4.1.2637.2.2.107.1.47 | INTEGER | read-only | The I/O processor where this session is terminated. |
| INT sessionStatusHistoryLastComponent | 1.3.6.1.4.1.2637.2.2.107.1.25 | INTEGER | read-only | The last component which was connected in this session. |
| INT sessionStatusHistoryLayer1Slot | 1.3.6.1.4.1.2637.2.2.107.1.26 | INTEGER | read-only | The slot where the physical layer of this session is terminated. |
| INT sessionStatusHistoryLayer2Slot | 1.3.6.1.4.1.2637.2.2.107.1.27 | INTEGER | read-only | The slot where the data link portion of this session is terminated |
| INT sessionStatusHistoryLinkCount | 1.3.6.1.4.1.2637.2.2.107.1.38 | INTEGER | read-only | The number of sessions sharing the same remote IP address as this session. After a session is terminated, this value will represent the number of sessions at the time of termination. |
| INT sessionStatusHistoryLinkId | 1.3.6.1.4.1.2637.2.2.107.1.83 | INTEGER | read-only | Link Id |
| INT sessionStatusHistoryLinkService | 1.3.6.1.4.1.2637.2.2.107.1.17 | INTEGER | read-only | A description of which link technology is being used by the session. |
| IP sessionStatusHistoryLocalIP | 1.3.6.1.4.1.2637.2.2.107.1.15 | IpAddress | read-only | The local IP address for this session. If the link is numbered, then this is the address assigned to the local end of the link. If the link is not numbered, this may be the primary IP address of the system. For PPP connections, this is the result of IPNCP negotiation. |
| IP sessionStatusHistoryLocalIPMask | 1.3.6.1.4.1.2637.2.2.107.1.16 | IpAddress | read-only | The local IP address mask for this session, used in conjunction with localIP. |
| INT sessionStatusHistoryModemDataCompression | 1.3.6.1.4.1.2637.2.2.107.1.69 | INTEGER | read-only | For modem sessions, the data compression protocol used, if any. |
| INT sessionStatusHistoryModemErrorCorrection | 1.3.6.1.4.1.2637.2.2.107.1.68 | INTEGER | read-only | For modem sessions, the error correction protocol used, if any. |
| INT sessionStatusHistoryModemLocalRenegotiations | 1.3.6.1.4.1.2637.2.2.107.1.75 | INTEGER | read-only | For modem sessions, the number of rate renegotiation requests sent by the local modem. |
| INT sessionStatusHistoryModemLocalRetrains | 1.3.6.1.4.1.2637.2.2.107.1.73 | INTEGER | read-only | For modem sessions, the number of retrain requests sent by the local modem. |
| INT sessionStatusHistoryModemModulation | 1.3.6.1.4.1.2637.2.2.107.1.67 | INTEGER | read-only | For modem sessions, the modulation protocol used, if any. |
| INT sessionStatusHistoryModemNumber | 1.3.6.1.4.1.2637.2.2.107.1.57 | INTEGER | read-only | The individual modem where this session is terminated, numbered from one to the maximum number of modems on the slot card. |
| INT sessionStatusHistoryModemReceiveLineLevel | 1.3.6.1.4.1.2637.2.2.107.1.77 | INTEGER | read-only | For modem sessions, the receive line signal level. This value is given in dB. |
| INT sessionStatusHistoryModemRemoteRenegotiations | 1.3.6.1.4.1.2637.2.2.107.1.76 | INTEGER | read-only | For modem sessions, the number of rate renegotiation requests sent by the remote modem. |
| INT sessionStatusHistoryModemRemoteRetrains | 1.3.6.1.4.1.2637.2.2.107.1.74 | INTEGER | read-only | For modem sessions, the number of retrain requests sent by the remote modem. |
| INT sessionStatusHistoryModemRetransmits | 1.3.6.1.4.1.2637.2.2.107.1.71 | INTEGER | read-only | For modem sessions, the number of packets retransmitted by the modem. |
| INT sessionStatusHistoryModemSNR | 1.3.6.1.4.1.2637.2.2.107.1.72 | INTEGER | read-only | For modem sessions, the Signal-to-Noise Ratio measured at the start of the connection. This value is given in dB. |
| INT sessionStatusHistoryModemTxBlocks | 1.3.6.1.4.1.2637.2.2.107.1.70 | INTEGER | read-only | For modem sessions, the number of blocks transmitted by the modem. |
| INT sessionStatusHistoryMultiLinkId | 1.3.6.1.4.1.2637.2.2.107.1.35 | INTEGER | read-only | The multi-link identifier value for PPP calls where the multi-link protocol was negotiated. |
| STR sessionStatusHistoryName | 1.3.6.1.4.1.2637.2.2.107.1.12 | DisplayString | read-only | The name of the connection peer for this session. During authentication of the session, this field may contain the name submitted by the peer. During this time, the value of timeOfService will be zero. When the value of timeOfService is nonzero, this field will contain a fully authenticated name. |
| INT sessionStatusHistoryOctetsIn | 1.3.6.1.4.1.2637.2.2.107.1.31 | INTEGER | read-only | The number of octets received from the remote user. This value will be zero until a session is terminated. |
| INT sessionStatusHistoryOctetsOut | 1.3.6.1.4.1.2637.2.2.107.1.32 | INTEGER | read-only | The number of octets sent to the remote user. This value will be zero until a session is terminated. |
| INT sessionStatusHistoryOriginateMode | 1.3.6.1.4.1.2637.2.2.107.1.30 | INTEGER | read-only | The direction of the physical layer call associated with this session |
| INT sessionStatusHistoryPack | 1.3.6.1.4.1.2637.2.2.107.1.49 | INTEGER | read-only | The integrated circuit pack where this session is terminated. |
| INT sessionStatusHistoryPacketsIn | 1.3.6.1.4.1.2637.2.2.107.1.33 | INTEGER | read-only | The number of packets received from the remote user. This value will be zero until a session is terminated. |
| INT sessionStatusHistoryPacketsOut | 1.3.6.1.4.1.2637.2.2.107.1.34 | INTEGER | read-only | The number of packets sent to the remote user. This value will be zero until a session is terminated. |
| INT sessionStatusHistoryPermanentFlag | 1.3.6.1.4.1.2637.2.2.107.1.10 | INTEGER | read-only | This variable indicates whether this session is permanent(2), meaning a long-lasting locally administered session such as a Frame Relay PVC, or switched(1), meaning a short-lived session resulting from a switched call. |
| INT sessionStatusHistoryPort | 1.3.6.1.4.1.2637.2.2.107.1.36 | INTEGER | read-only | The number of the DS1 for this session, relative to layer1Slot. |
| IP sessionStatusHistoryRemoteIP | 1.3.6.1.4.1.2637.2.2.107.1.13 | IpAddress | read-only | The connection peer's IP address. If the link is numbered, then this is the address assigned to the other end of the link. If the link is not numbered, this may be the single IP address of the peer. For PPP connections, this is the result of IPNCP negotiation. |
| IP sessionStatusHistoryRemoteIPMask | 1.3.6.1.4.1.2637.2.2.107.1.14 | IpAddress | read-only | The connection peer's IP address mask, used in conjunction with remoteIP. |
| INT sessionStatusHistoryRemoteIPXNetwork | 1.3.6.1.4.1.2637.2.2.107.1.78 | INTEGER | read-only | The IPX network assigned to the dial-up user. |
| STR sessionStatusHistoryRemoteIPXNode | 1.3.6.1.4.1.2637.2.2.107.1.79 | DisplayString | read-only | The IPX Node number assisgned to the dial-up user |
| INT sessionStatusHistoryRxEndDataRate | 1.3.6.1.4.1.2637.2.2.107.1.42 | INTEGER | read-only | The receive data rate at the end of a modem session. |
| INT sessionStatusHistoryRxMaxDataRate | 1.3.6.1.4.1.2637.2.2.107.1.46 | INTEGER | read-only | The maximum receive data rate during a modem session. |
| INT sessionStatusHistoryRxMinDataRate | 1.3.6.1.4.1.2637.2.2.107.1.44 | INTEGER | read-only | The minimum receive data rate during a modem session. |
| INT sessionStatusHistoryRxStartDataRate | 1.3.6.1.4.1.2637.2.2.107.1.40 | INTEGER | read-only | The receive data rate for this session. In the case of modem sessions, this will be the DCE rate reported as a result of initial modem negotiation, and may not track rate chanes during the call. For ISDN sessions, this will be the actual data service rate of the call. For Frame Relay sessions, this will be the nominal speed of the Frame Relay Physical Interface, even though multiple sessions may be sharing that Physical Interface. For other sessions, this will be the nominal speed of the physical interface. In no case should this be interepreted as a Quality-of-Service guarantee, or as the current line utilization or effective bandwidth on the interface. Note also that in the case of PPP multilink, this specifies the rate of only this link in the bundle, and not the aggregate rate of all links in the bundle. |
| INT sessionStatusHistoryServiceMode | 1.3.6.1.4.1.2637.2.2.107.1.18 | INTEGER | read-only | A description of which session service is being used by the session. |
| INT sessionStatusHistorySessionID | 1.3.6.1.4.1.2637.2.2.107.1.2 | INTEGER | read-only | The serial number of this session, a unique number for this boot era. When combined with the value of BootEra, provides a session number that is unique for the life of the system. |
| STR sessionStatusHistorySs7SessionId | 1.3.6.1.4.1.2637.2.2.107.1.56 | DisplayString | read-only | A uniquie identifier for this session within the ss7 Network. If this call was not originated using ss7 signalling, this string will be null. |
| INT sessionStatusHistoryStartTime | 1.3.6.1.4.1.2637.2.2.107.1.19 | INTEGER | read-only | The time that this session began, in seconds since the system booted. |
| INT sessionStatusHistoryState | 1.3.6.1.4.1.2637.2.2.107.1.3 | INTEGER | read-only | This variable indicates the state of this session. |
| INT sessionStatusHistoryStopTime | 1.3.6.1.4.1.2637.2.2.107.1.20 | INTEGER | read-only | The time that this session stopped, in seconds since the system booted. This variable is only meaningful for sessions having the state inactive(0). |
| sessionStatusHistoryTable | 1.3.6.1.4.1.2637.2.2.107 | not-accessible | The table provides a historical view of the inactive sessions in the session table. It contains inactive sessions up to a maximum of SessionTableSize entries. This table is ordered by termination time of the sessions. The bounds of this table at any given time are described by the variables HistoryLowest and HistoryHighest. As new entries are inserted into the table, the inactive entries with the oldest termination time get aged out from the table. | |
| INT sessionStatusHistoryTandemPort | 1.3.6.1.4.1.2637.2.2.107.1.62 | INTEGER | read-only | The port used for the outbound portion of a tandem call, if applicable. |
| INT sessionStatusHistoryTandemTimeslot | 1.3.6.1.4.1.2637.2.2.107.1.63 | INTEGER | read-only | The timeslot used for the outbound portion of a tandem call, if applicable. |
| INT sessionStatusHistoryTdmStream | 1.3.6.1.4.1.2637.2.2.107.1.51 | INTEGER | read-only | The TDM highway stream associated with this session. |
| INT sessionStatusHistoryTdmTimeSlot | 1.3.6.1.4.1.2637.2.2.107.1.52 | INTEGER | read-only | The TDM highway time-slot associated with this session. |
| INT sessionStatusHistoryTerminatingComponent | 1.3.6.1.4.1.2637.2.2.107.1.23 | INTEGER | read-only | The component which initiated termination of this session. In cases where there are multiple causes of session termination, only the first cause detected is reported. This variable is only meaningful for sessions having the state inactive(0). |
| INT sessionStatusHistoryTerminationCause | 1.3.6.1.4.1.2637.2.2.107.1.24 | INTEGER | read-only | The cause which initiated termination of this session. In cases where there are multiple causes of session termination, only the first cause detected is reported. This variable is only meaningful for sessions having the state inactive(0). |
| STR sessionStatusHistoryTerminationReason | 1.3.6.1.4.1.2637.2.2.107.1.53 | DisplayString | read-only | A textual description of the cause which initiated termination of this session. In cases where there are multiple causes of session termination, only the first cause detected is reported. |
| INT sessionStatusHistoryTimeOfModemSync | 1.3.6.1.4.1.2637.2.2.107.1.21 | INTEGER | read-only | The time at which the modem synchronization completed, in seconds since the system booted. |
| INT sessionStatusHistoryTimeOfService | 1.3.6.1.4.1.2637.2.2.107.1.22 | INTEGER | read-only | The time that this session entered its first negotiated or configured service, in seconds since the system booted. For example, for a session with serviceMode PPP, the time at which LCP and IPCP negotiations completed and the session was ready to forward user data. |
| INT sessionStatusHistoryTimeslot | 1.3.6.1.4.1.2637.2.2.107.1.37 | INTEGER | read-only | The number of the DS0 for this session, relative to port. |
| INT sessionStatusHistoryTunnelId | 1.3.6.1.4.1.2637.2.2.107.1.82 | INTEGER | read-only | Tunnel Id |
| INT sessionStatusHistoryTunnelMediumType | 1.3.6.1.4.1.2637.2.2.107.1.59 | INTEGER | read-only | The tunneling medium protocol being used for this session. |
| IP sessionStatusHistoryTunnelServerAddress | 1.3.6.1.4.1.2637.2.2.107.1.60 | IpAddress | read-only | The IP address of the remote machine terminating the tunnel for this session. |
| INT sessionStatusHistoryTunnelType | 1.3.6.1.4.1.2637.2.2.107.1.58 | INTEGER | read-only | The tunneling protocol being used for this session. |
| INT sessionStatusHistoryTxEndDataRate | 1.3.6.1.4.1.2637.2.2.107.1.41 | INTEGER | read-only | The transmit data rate at the end of a modem session. |
| INT sessionStatusHistoryTxMaxDataRate | 1.3.6.1.4.1.2637.2.2.107.1.45 | INTEGER | read-only | The maximum transmit data rate during a modem session. |
| INT sessionStatusHistoryTxMinDataRate | 1.3.6.1.4.1.2637.2.2.107.1.43 | INTEGER | read-only | The minimum transmit data rate during a modem session. |
| INT sessionStatusHistoryTxStartDataRate | 1.3.6.1.4.1.2637.2.2.107.1.39 | INTEGER | read-only | The transmit DCE data rate for this session. In the case of modem sessions, this will be the DCE rate reported as a result of initial modem negotiation, and may not track rate chanes during the call. For ISDN sessions, this will be the actual data service rate of the call. For Frame Relay sessions, this will be the nominal speed of the Frame Relay Physical Interface, even though multiple sessions may be sharing that Physical Interface. For other sessions, this will be the nominal speed of the physical interface. In no case should this be interepreted as a Quality-of-Service guarantee, or as the current line utilization or effective bandwidth on the interface. Note also that in the case of PPP multilink, this specifies the rate of only this link in the bundle, and not the aggregate rate of all links in the bundle. |
| INT sessionStatusHistoryVpopId | 1.3.6.1.4.1.2637.2.2.107.1.11 | INTEGER | read-only | The identifier of the VPOP (administrative Group) to which the session belongs. A value of 0 indicates the default VPOP. |
| INT sessionStatusInactiveActualAuthMethod | 1.3.6.1.4.1.2637.2.2.103.1.66 | INTEGER | read-only | The actual authentication method which was used to gain access to services. Radius, Local, Remote. |
| INT sessionStatusInactiveCallClass | 1.3.6.1.4.1.2637.2.2.103.1.61 | INTEGER | read-only | The class of this call. |
| OCT sessionStatusInactiveCallClassArray | 1.3.6.1.4.1.2637.2.2.103.1.64 | OCTET STRING | read-only | An array of octets representing the class of this call. |
| INT sessionStatusInactiveCallClassLen | 1.3.6.1.4.1.2637.2.2.103.1.65 | INTEGER | read-only | The number of octets in callClassArray. |
| STR sessionStatusInactiveCalledNumber | 1.3.6.1.4.1.2637.2.2.103.1.28 | DisplayString | read-only | 16 digit number of called station (if available) |
| STR sessionStatusInactiveCallingNumber | 1.3.6.1.4.1.2637.2.2.103.1.29 | DisplayString | read-only | 16 digit number of calling station (if available) |
| IP sessionStatusInactiveCleartcpRemoteIP | 1.3.6.1.4.1.2637.2.2.103.1.80 | IpAddress | read-only | Cleartcp Remote IP Address |
| INT sessionStatusInactiveCleartcpRemotePort | 1.3.6.1.4.1.2637.2.2.103.1.81 | INTEGER | read-only | Cleartcp Remote Port Address |
| INT sessionStatusInactiveDevice | 1.3.6.1.4.1.2637.2.2.103.1.50 | INTEGER | read-only | The modem/hdlc where this session is terminated. |
| INT sessionStatusInactiveDmm | 1.3.6.1.4.1.2637.2.2.103.1.48 | INTEGER | read-only | The Digital Modem Module where this session is terminated. |
| INT sessionStatusInactiveDuration | 1.3.6.1.4.1.2637.2.2.103.1.54 | INTEGER | read-only | The number of seconds this session has been active. |
| STR sessionStatusInactiveDurationHMS | 1.3.6.1.4.1.2637.2.2.103.1.55 | DisplayString | read-only | The length of time this session has been active, expressed in DDD HH:MM:SSS.000. |
| sessionStatusInactiveEntry | 1.3.6.1.4.1.2637.2.2.103.1 | not-accessible | This is the structure of entries in the sessionStatusInactiveTable. | |
| INT sessionStatusInactiveIop | 1.3.6.1.4.1.2637.2.2.103.1.47 | INTEGER | read-only | The I/O processor where this session is terminated. |
| INT sessionStatusInactiveLastComponent | 1.3.6.1.4.1.2637.2.2.103.1.25 | INTEGER | read-only | The last component which was connected in this session. |
| INT sessionStatusInactiveLayer1Slot | 1.3.6.1.4.1.2637.2.2.103.1.26 | INTEGER | read-only | The slot where the physical layer of this session is terminated. |
| INT sessionStatusInactiveLayer2Slot | 1.3.6.1.4.1.2637.2.2.103.1.27 | INTEGER | read-only | The slot where the data link portion of this session is terminated |
| INT sessionStatusInactiveLinkCount | 1.3.6.1.4.1.2637.2.2.103.1.38 | INTEGER | read-only | The number of sessions sharing the same remote IP address as this session. After a session is terminated, this value will represent the number of sessions at the time of termination. |
| INT sessionStatusInactiveLinkId | 1.3.6.1.4.1.2637.2.2.103.1.83 | INTEGER | read-only | Link Id |
| INT sessionStatusInactiveLinkService | 1.3.6.1.4.1.2637.2.2.103.1.17 | INTEGER | read-only | A description of which link technology is being used by the session. |
| IP sessionStatusInactiveLocalIP | 1.3.6.1.4.1.2637.2.2.103.1.15 | IpAddress | read-only | The local IP address for this session. If the link is numbered, then this is the address assigned to the local end of the link. If the link is not numbered, this may be the primary IP address of the system. For PPP connections, this is the result of IPNCP negotiation. |
| IP sessionStatusInactiveLocalIPMask | 1.3.6.1.4.1.2637.2.2.103.1.16 | IpAddress | read-only | The local IP address mask for this session, used in conjunction with localIP. |
| INT sessionStatusInactiveModemDataCompression | 1.3.6.1.4.1.2637.2.2.103.1.69 | INTEGER | read-only | For modem sessions, the data compression protocol used, if any. |
| INT sessionStatusInactiveModemErrorCorrection | 1.3.6.1.4.1.2637.2.2.103.1.68 | INTEGER | read-only | For modem sessions, the error correction protocol used, if any. |
| INT sessionStatusInactiveModemLocalRenegotiations | 1.3.6.1.4.1.2637.2.2.103.1.75 | INTEGER | read-only | For modem sessions, the number of rate renegotiation requests sent by the local modem. |
| INT sessionStatusInactiveModemLocalRetrains | 1.3.6.1.4.1.2637.2.2.103.1.73 | INTEGER | read-only | For modem sessions, the number of retrain requests sent by the local modem. |
| INT sessionStatusInactiveModemModulation | 1.3.6.1.4.1.2637.2.2.103.1.67 | INTEGER | read-only | For modem sessions, the modulation protocol used, if any. |
| INT sessionStatusInactiveModemNumber | 1.3.6.1.4.1.2637.2.2.103.1.57 | INTEGER | read-only | The individual modem where this session is terminated, numbered from one to the maximum number of modems on the slot card. |
| INT sessionStatusInactiveModemReceiveLineLevel | 1.3.6.1.4.1.2637.2.2.103.1.77 | INTEGER | read-only | For modem sessions, the receive line signal level. This value is given in dB. |
| INT sessionStatusInactiveModemRemoteRenegotiations | 1.3.6.1.4.1.2637.2.2.103.1.76 | INTEGER | read-only | For modem sessions, the number of rate renegotiation requests sent by the remote modem. |
| INT sessionStatusInactiveModemRemoteRetrains | 1.3.6.1.4.1.2637.2.2.103.1.74 | INTEGER | read-only | For modem sessions, the number of retrain requests sent by the remote modem. |
| INT sessionStatusInactiveModemRetransmits | 1.3.6.1.4.1.2637.2.2.103.1.71 | INTEGER | read-only | For modem sessions, the number of packets retransmitted by the modem. |
| INT sessionStatusInactiveModemSNR | 1.3.6.1.4.1.2637.2.2.103.1.72 | INTEGER | read-only | For modem sessions, the Signal-to-Noise Ratio measured at the start of the connection. This value is given in dB. |
| INT sessionStatusInactiveModemTxBlocks | 1.3.6.1.4.1.2637.2.2.103.1.70 | INTEGER | read-only | For modem sessions, the number of blocks transmitted by the modem. |
| INT sessionStatusInactiveMultiLinkId | 1.3.6.1.4.1.2637.2.2.103.1.35 | INTEGER | read-only | The multi-link identifier value for PPP calls where the multi-link protocol was negotiated. |
| STR sessionStatusInactiveName | 1.3.6.1.4.1.2637.2.2.103.1.12 | DisplayString | read-only | The name of the connection peer for this session. During authentication of the session, this field may contain the name submitted by the peer. During this time, the value of timeOfService will be zero. When the value of timeOfService is nonzero, this field will contain a fully authenticated name. |
| INT sessionStatusInactiveOctetsIn | 1.3.6.1.4.1.2637.2.2.103.1.31 | INTEGER | read-only | The number of octets received from the remote user. This value will be zero until a session is terminated. |
| INT sessionStatusInactiveOctetsOut | 1.3.6.1.4.1.2637.2.2.103.1.32 | INTEGER | read-only | The number of octets sent to the remote user. This value will be zero until a session is terminated. |
| INT sessionStatusInactiveOriginateMode | 1.3.6.1.4.1.2637.2.2.103.1.30 | INTEGER | read-only | The direction of the physical layer call associated with this session |
| INT sessionStatusInactivePack | 1.3.6.1.4.1.2637.2.2.103.1.49 | INTEGER | read-only | The integrated circuit pack where this session is terminated. |
| INT sessionStatusInactivePacketsIn | 1.3.6.1.4.1.2637.2.2.103.1.33 | INTEGER | read-only | The number of packets received from the remote user. This value will be zero until a session is terminated. |
| INT sessionStatusInactivePacketsOut | 1.3.6.1.4.1.2637.2.2.103.1.34 | INTEGER | read-only | The number of packets sent to the remote user. This value will be zero until a session is terminated. |
| INT sessionStatusInactivePermanentFlag | 1.3.6.1.4.1.2637.2.2.103.1.10 | INTEGER | read-only | This variable indicates whether this session is permanent(2), meaning a long-lasting locally administered session such as a Frame Relay PVC, or switched(1), meaning a short-lived session resulting from a switched call. |
| INT sessionStatusInactivePort | 1.3.6.1.4.1.2637.2.2.103.1.36 | INTEGER | read-only | The number of the DS1 for this session, relative to layer1Slot. |
| IP sessionStatusInactiveRemoteIP | 1.3.6.1.4.1.2637.2.2.103.1.13 | IpAddress | read-only | The connection peer's IP address. If the link is numbered, then this is the address assigned to the other end of the link. If the link is not numbered, this may be the single IP address of the peer. For PPP connections, this is the result of IPNCP negotiation. |
| IP sessionStatusInactiveRemoteIPMask | 1.3.6.1.4.1.2637.2.2.103.1.14 | IpAddress | read-only | The connection peer's IP address mask, used in conjunction with remoteIP. |
| INT sessionStatusInactiveRemoteIPXNetwork | 1.3.6.1.4.1.2637.2.2.103.1.78 | INTEGER | read-only | The IPX network assigned to the dial-up user. |
| STR sessionStatusInactiveRemoteIPXNode | 1.3.6.1.4.1.2637.2.2.103.1.79 | DisplayString | read-only | The IPX Node number assisgned to the dial-up user |
| INT sessionStatusInactiveRxEndDataRate | 1.3.6.1.4.1.2637.2.2.103.1.42 | INTEGER | read-only | The receive data rate at the end of a modem session. |
| INT sessionStatusInactiveRxMaxDataRate | 1.3.6.1.4.1.2637.2.2.103.1.46 | INTEGER | read-only | The maximum receive data rate during a modem session. |
| INT sessionStatusInactiveRxMinDataRate | 1.3.6.1.4.1.2637.2.2.103.1.44 | INTEGER | read-only | The minimum receive data rate during a modem session. |
| INT sessionStatusInactiveRxStartDataRate | 1.3.6.1.4.1.2637.2.2.103.1.40 | INTEGER | read-only | The receive data rate for this session. In the case of modem sessions, this will be the DCE rate reported as a result of initial modem negotiation, and may not track rate chanes during the call. For ISDN sessions, this will be the actual data service rate of the call. For Frame Relay sessions, this will be the nominal speed of the Frame Relay Physical Interface, even though multiple sessions may be sharing that Physical Interface. For other sessions, this will be the nominal speed of the physical interface. In no case should this be interepreted as a Quality-of-Service guarantee, or as the current line utilization or effective bandwidth on the interface. Note also that in the case of PPP multilink, this specifies the rate of only this link in the bundle, and not the aggregate rate of all links in the bundle. |
| INT sessionStatusInactiveServiceMode | 1.3.6.1.4.1.2637.2.2.103.1.18 | INTEGER | read-only | A description of which session service is being used by the session. |
| INT sessionStatusInactiveSessionID | 1.3.6.1.4.1.2637.2.2.103.1.2 | INTEGER | read-only | The serial number of this session, a unique number for this boot era. When combined with the value of BootEra, provides a session number that is unique for the life of the system. Note that these are very sparsely numbered. |
| STR sessionStatusInactiveSs7SessionId | 1.3.6.1.4.1.2637.2.2.103.1.56 | DisplayString | read-only | A uniquie identifier for this session within the ss7 Network. If this call was not originated using ss7 signalling, this string will be null. |
| INT sessionStatusInactiveStartTime | 1.3.6.1.4.1.2637.2.2.103.1.19 | INTEGER | read-only | The time that this session began, in seconds since the system booted. |
| INT sessionStatusInactiveState | 1.3.6.1.4.1.2637.2.2.103.1.3 | INTEGER | read-only | This variable indicates the state of this session. |
| INT sessionStatusInactiveStopTime | 1.3.6.1.4.1.2637.2.2.103.1.20 | INTEGER | read-only | The time that this session stopped, in seconds since the system booted. This variable is only meaningful for sessions having the state inactive(0). |
| sessionStatusInactiveTable | 1.3.6.1.4.1.2637.2.2.103 | not-accessible | The table contains the most recent inactive sessions, up to a maximum of SessionTableSize entries. The bounds of this table at any given time are described by the variables InactiveLowest and InactiveHighest. This table is ordered by session serial number. As new entries are appended to the bottom of the table, the inactive entries with the oldest termination time get aged out from near the top of the table. | |
| INT sessionStatusInactiveTandemPort | 1.3.6.1.4.1.2637.2.2.103.1.62 | INTEGER | read-only | The port used for the outbound portion of a tandem call, if applicable. |
| INT sessionStatusInactiveTandemTimeslot | 1.3.6.1.4.1.2637.2.2.103.1.63 | INTEGER | read-only | The timeslot used for the outbound portion of a tandem call, if applicable. |
| INT sessionStatusInactiveTdmStream | 1.3.6.1.4.1.2637.2.2.103.1.51 | INTEGER | read-only | The TDM highway stream associated with this session. |
| INT sessionStatusInactiveTdmTimeSlot | 1.3.6.1.4.1.2637.2.2.103.1.52 | INTEGER | read-only | The TDM highway time-slot associated with this session. |
| INT sessionStatusInactiveTerminatingComponent | 1.3.6.1.4.1.2637.2.2.103.1.23 | INTEGER | read-only | The component which initiated termination of this session. In cases where there are multiple causes of session termination, only the first cause detected is reported. This variable is only meaningful for sessions having the state inactive(0). |
| INT sessionStatusInactiveTerminationCause | 1.3.6.1.4.1.2637.2.2.103.1.24 | INTEGER | read-only | The cause which initiated termination of this session. In cases where there are multiple causes of session termination, only the first cause detected is reported. This variable is only meaningful for sessions having the state inactive(0). |
| STR sessionStatusInactiveTerminationReason | 1.3.6.1.4.1.2637.2.2.103.1.53 | DisplayString | read-only | A textual description of the cause which initiated termination of this session. In cases where there are multiple causes of session termination, only the first cause detected is reported. |
| INT sessionStatusInactiveTimeOfModemSync | 1.3.6.1.4.1.2637.2.2.103.1.21 | INTEGER | read-only | The time at which the modem synchronization completed, in seconds since the system booted. |
| INT sessionStatusInactiveTimeOfService | 1.3.6.1.4.1.2637.2.2.103.1.22 | INTEGER | read-only | The time that this session entered its first negotiated or configured service, in seconds since the system booted. For example, for a session with serviceMode PPP, the time at which LCP and IPCP negotiations completed and the session was ready to forward user data. |
| INT sessionStatusInactiveTimeslot | 1.3.6.1.4.1.2637.2.2.103.1.37 | INTEGER | read-only | The number of the DS0 for this session, relative to port. |
| INT sessionStatusInactiveTunnelId | 1.3.6.1.4.1.2637.2.2.103.1.82 | INTEGER | read-only | Tunnel Id |
| INT sessionStatusInactiveTunnelMediumType | 1.3.6.1.4.1.2637.2.2.103.1.59 | INTEGER | read-only | The tunneling medium protocol being used for this session. |
| IP sessionStatusInactiveTunnelServerAddress | 1.3.6.1.4.1.2637.2.2.103.1.60 | IpAddress | read-only | The IP address of the remote machine terminating the tunnel for this session. |
| INT sessionStatusInactiveTunnelType | 1.3.6.1.4.1.2637.2.2.103.1.58 | INTEGER | read-only | The tunneling protocol being used for this session. |
| INT sessionStatusInactiveTxEndDataRate | 1.3.6.1.4.1.2637.2.2.103.1.41 | INTEGER | read-only | The transmit data rate at the end of a modem session. |
| INT sessionStatusInactiveTxMaxDataRate | 1.3.6.1.4.1.2637.2.2.103.1.45 | INTEGER | read-only | The maximum transmit data rate during a modem session. |
| INT sessionStatusInactiveTxMinDataRate | 1.3.6.1.4.1.2637.2.2.103.1.43 | INTEGER | read-only | The minimum transmit data rate during a modem session. |
| INT sessionStatusInactiveTxStartDataRate | 1.3.6.1.4.1.2637.2.2.103.1.39 | INTEGER | read-only | The transmit DCE data rate for this session. In the case of modem sessions, this will be the DCE rate reported as a result of initial modem negotiation, and may not track rate chanes during the call. For ISDN sessions, this will be the actual data service rate of the call. For Frame Relay sessions, this will be the nominal speed of the Frame Relay Physical Interface, even though multiple sessions may be sharing that Physical Interface. For other sessions, this will be the nominal speed of the physical interface. In no case should this be interepreted as a Quality-of-Service guarantee, or as the current line utilization or effective bandwidth on the interface. Note also that in the case of PPP multilink, this specifies the rate of only this link in the bundle, and not the aggregate rate of all links in the bundle. |
| INT sessionStatusInactiveVpopId | 1.3.6.1.4.1.2637.2.2.103.1.11 | INTEGER | read-only | The identifier of the VPOP (administrative Group) to which the session belongs. A value of 0 indicates the default VPOP. |
| INT sessionStatusIop | 1.3.6.1.4.1.2637.2.2.101.1.47 | INTEGER | read-only | The I/O processor where this session is terminated. |
| INT sessionStatusLastComponent | 1.3.6.1.4.1.2637.2.2.101.1.25 | INTEGER | read-only | The last component which was connected in this session. |
| INT sessionStatusLayer1Slot | 1.3.6.1.4.1.2637.2.2.101.1.26 | INTEGER | read-only | The slot where the physical layer of this session is terminated. |
| INT sessionStatusLayer2Slot | 1.3.6.1.4.1.2637.2.2.101.1.27 | INTEGER | read-only | The slot where the data link portion of this session is terminated |
| INT sessionStatusLinkCount | 1.3.6.1.4.1.2637.2.2.101.1.38 | INTEGER | read-only | The number of sessions sharing the same remote IP address as this session. After a session is terminated, this value will represent the number of sessions at the time of termination. |
| INT sessionStatusLinkId | 1.3.6.1.4.1.2637.2.2.101.1.83 | INTEGER | read-only | Link Id |
| INT sessionStatusLinkService | 1.3.6.1.4.1.2637.2.2.101.1.17 | INTEGER | read-only | A description of which link technology is being used by the session. |
| IP sessionStatusLocalIP | 1.3.6.1.4.1.2637.2.2.101.1.15 | IpAddress | read-only | The local IP address for this session. If the link is numbered, then this is the address assigned to the local end of the link. If the link is not numbered, this may be the primary IP address of the system. For PPP connections, this is the result of IPNCP negotiation. |
| IP sessionStatusLocalIPMask | 1.3.6.1.4.1.2637.2.2.101.1.16 | IpAddress | read-only | The local IP address mask for this session, used in conjunction with localIP. |
| INT sessionStatusModemDataCompression | 1.3.6.1.4.1.2637.2.2.101.1.69 | INTEGER | read-only | For modem sessions, the data compression protocol used, if any. |
| INT sessionStatusModemErrorCorrection | 1.3.6.1.4.1.2637.2.2.101.1.68 | INTEGER | read-only | For modem sessions, the error correction protocol used, if any. |
| INT sessionStatusModemLocalRenegotiations | 1.3.6.1.4.1.2637.2.2.101.1.75 | INTEGER | read-only | For modem sessions, the number of rate renegotiation requests sent by the local modem. |
| INT sessionStatusModemLocalRetrains | 1.3.6.1.4.1.2637.2.2.101.1.73 | INTEGER | read-only | For modem sessions, the number of retrain requests sent by the local modem. |
| INT sessionStatusModemModulation | 1.3.6.1.4.1.2637.2.2.101.1.67 | INTEGER | read-only | For modem sessions, the modulation protocol used, if any. |
| INT sessionStatusModemNumber | 1.3.6.1.4.1.2637.2.2.101.1.57 | INTEGER | read-only | The individual modem where this session is terminated, numbered from one to the maximum number of modems on the slot card. |
| INT sessionStatusModemReceiveLineLevel | 1.3.6.1.4.1.2637.2.2.101.1.77 | INTEGER | read-only | For modem sessions, the receive line signal level. This value is given in dB. |
| INT sessionStatusModemRemoteRenegotiations | 1.3.6.1.4.1.2637.2.2.101.1.76 | INTEGER | read-only | For modem sessions, the number of rate renegotiation requests sent by the remote modem. |
| INT sessionStatusModemRemoteRetrains | 1.3.6.1.4.1.2637.2.2.101.1.74 | INTEGER | read-only | For modem sessions, the number of retrain requests sent by the remote modem. |
| INT sessionStatusModemRetransmits | 1.3.6.1.4.1.2637.2.2.101.1.71 | INTEGER | read-only | For modem sessions, the number of packets retransmitted by the modem. |
| INT sessionStatusModemSNR | 1.3.6.1.4.1.2637.2.2.101.1.72 | INTEGER | read-only | For modem sessions, the Signal-to-Noise Ratio measured at the start of the connection. This value is given in dB. |
| INT sessionStatusModemTxBlocks | 1.3.6.1.4.1.2637.2.2.101.1.70 | INTEGER | read-only | For modem sessions, the number of blocks transmitted by the modem. |
| INT sessionStatusMultiLinkId | 1.3.6.1.4.1.2637.2.2.101.1.35 | INTEGER | read-only | The multi-link identifier value for PPP calls where the multi-link protocol was negotiated. |
| STR sessionStatusName | 1.3.6.1.4.1.2637.2.2.101.1.12 | DisplayString | read-only | The name of the connection peer for this session. During authentication of the session, this field may contain the name submitted by the peer. During this time, the value of timeOfService will be zero. When the value of timeOfService is nonzero, this field will contain a fully authenticated name. |
| INT sessionStatusOctetsIn | 1.3.6.1.4.1.2637.2.2.101.1.31 | INTEGER | read-only | The number of octets received from the remote user. This value will be zero until a session is terminated. |
| INT sessionStatusOctetsOut | 1.3.6.1.4.1.2637.2.2.101.1.32 | INTEGER | read-only | The number of octets sent to the remote user. This value will be zero until a session is terminated. |
| INT sessionStatusOriginateMode | 1.3.6.1.4.1.2637.2.2.101.1.30 | INTEGER | read-only | The direction of the physical layer call associated with this session |
| INT sessionStatusPack | 1.3.6.1.4.1.2637.2.2.101.1.49 | INTEGER | read-only | The integrated circuit pack where this session is terminated. |
| INT sessionStatusPacketsIn | 1.3.6.1.4.1.2637.2.2.101.1.33 | INTEGER | read-only | The number of packets received from the remote user. This value will be zero until a session is terminated. |
| INT sessionStatusPacketsOut | 1.3.6.1.4.1.2637.2.2.101.1.34 | INTEGER | read-only | The number of packets sent to the remote user. This value will be zero until a session is terminated. |
| INT sessionStatusPermanentFlag | 1.3.6.1.4.1.2637.2.2.101.1.10 | INTEGER | read-only | This variable indicates whether this session is permanent(2), meaning a long-lasting locally administered session such as a Frame Relay PVC, or switched(1), meaning a short-lived session resulting from a switched call. |
| INT sessionStatusPort | 1.3.6.1.4.1.2637.2.2.101.1.36 | INTEGER | read-only | The number of the DS1 for this session, relative to layer1Slot. |
| IP sessionStatusRemoteIP | 1.3.6.1.4.1.2637.2.2.101.1.13 | IpAddress | read-only | The connection peer's IP address. If the link is numbered, then this is the address assigned to the other end of the link. If the link is not numbered, this may be the single IP address of the peer. For PPP connections, this is the result of IPNCP negotiation. |
| IP sessionStatusRemoteIPMask | 1.3.6.1.4.1.2637.2.2.101.1.14 | IpAddress | read-only | The connection peer's IP address mask, used in conjunction with remoteIP. |
| INT sessionStatusRemoteIPXNetwork | 1.3.6.1.4.1.2637.2.2.101.1.78 | INTEGER | read-only | The IPX network assigned to the dial-up user. |
| STR sessionStatusRemoteIPXNode | 1.3.6.1.4.1.2637.2.2.101.1.79 | DisplayString | read-only | The IPX Node number assisgned to the dial-up user |
| INT sessionStatusReverseActualAuthMethod | 1.3.6.1.4.1.2637.2.2.106.1.66 | INTEGER | read-only | The actual authentication method which was used to gain access to services. Radius, Local, Remote. |
| INT sessionStatusReverseCallClass | 1.3.6.1.4.1.2637.2.2.106.1.61 | INTEGER | read-only | The class of this call. |
| OCT sessionStatusReverseCallClassArray | 1.3.6.1.4.1.2637.2.2.106.1.64 | OCTET STRING | read-only | An array of octets representing the class of this call. |
| INT sessionStatusReverseCallClassLen | 1.3.6.1.4.1.2637.2.2.106.1.65 | INTEGER | read-only | The number of octets in callClassArray. |
| STR sessionStatusReverseCalledNumber | 1.3.6.1.4.1.2637.2.2.106.1.28 | DisplayString | read-only | 16 digit number of called station (if available) |
| STR sessionStatusReverseCallingNumber | 1.3.6.1.4.1.2637.2.2.106.1.29 | DisplayString | read-only | 16 digit number of calling station (if available) |
| IP sessionStatusReverseCleartcpRemoteIP | 1.3.6.1.4.1.2637.2.2.106.1.80 | IpAddress | read-only | Cleartcp Remote IP Address |
| INT sessionStatusReverseCleartcpRemotePort | 1.3.6.1.4.1.2637.2.2.106.1.81 | INTEGER | read-only | Cleartcp Remote Port Address |
| INT sessionStatusReverseDevice | 1.3.6.1.4.1.2637.2.2.106.1.50 | INTEGER | read-only | The modem/hdlc where this session is terminated. |
| INT sessionStatusReverseDmm | 1.3.6.1.4.1.2637.2.2.106.1.48 | INTEGER | read-only | The Digital Modem Module where this session is terminated. |
| INT sessionStatusReverseDuration | 1.3.6.1.4.1.2637.2.2.106.1.54 | INTEGER | read-only | The number of seconds this session has been active. |
| STR sessionStatusReverseDurationHMS | 1.3.6.1.4.1.2637.2.2.106.1.55 | DisplayString | read-only | The length of time this session has been active, expressed in DDD HH:MM:SSS.000. |
| sessionStatusReverseEntry | 1.3.6.1.4.1.2637.2.2.106.1 | not-accessible | This is the structure of entries in the sessionStatusReverseTable. | |
| INT sessionStatusReverseIop | 1.3.6.1.4.1.2637.2.2.106.1.47 | INTEGER | read-only | The I/O processor where this session is terminated. |
| INT sessionStatusReverseLastComponent | 1.3.6.1.4.1.2637.2.2.106.1.25 | INTEGER | read-only | The last component which was connected in this session. |
| INT sessionStatusReverseLayer1Slot | 1.3.6.1.4.1.2637.2.2.106.1.26 | INTEGER | read-only | The slot where the physical layer of this session is terminated. |
| INT sessionStatusReverseLayer2Slot | 1.3.6.1.4.1.2637.2.2.106.1.27 | INTEGER | read-only | The slot where the data link portion of this session is terminated |
| INT sessionStatusReverseLinkCount | 1.3.6.1.4.1.2637.2.2.106.1.38 | INTEGER | read-only | The number of sessions sharing the same remote IP address as this session. After a session is terminated, this value will represent the number of sessions at the time of termination. |
| INT sessionStatusReverseLinkId | 1.3.6.1.4.1.2637.2.2.106.1.83 | INTEGER | read-only | Link Id |
| INT sessionStatusReverseLinkService | 1.3.6.1.4.1.2637.2.2.106.1.17 | INTEGER | read-only | A description of which link technology is being used by the session. |
| IP sessionStatusReverseLocalIP | 1.3.6.1.4.1.2637.2.2.106.1.15 | IpAddress | read-only | The local IP address for this session. If the link is numbered, then this is the address assigned to the local end of the link. If the link is not numbered, this may be the primary IP address of the system. For PPP connections, this is the result of IPNCP negotiation. |
| IP sessionStatusReverseLocalIPMask | 1.3.6.1.4.1.2637.2.2.106.1.16 | IpAddress | read-only | The local IP address mask for this session, used in conjunction with localIP. |
| INT sessionStatusReverseModemDataCompression | 1.3.6.1.4.1.2637.2.2.106.1.69 | INTEGER | read-only | For modem sessions, the data compression protocol used, if any. |
| INT sessionStatusReverseModemErrorCorrection | 1.3.6.1.4.1.2637.2.2.106.1.68 | INTEGER | read-only | For modem sessions, the error correction protocol used, if any. |
| INT sessionStatusReverseModemLocalRenegotiations | 1.3.6.1.4.1.2637.2.2.106.1.75 | INTEGER | read-only | For modem sessions, the number of rate renegotiation requests sent by the local modem. |
| INT sessionStatusReverseModemLocalRetrains | 1.3.6.1.4.1.2637.2.2.106.1.73 | INTEGER | read-only | For modem sessions, the number of retrain requests sent by the local modem. |
| INT sessionStatusReverseModemModulation | 1.3.6.1.4.1.2637.2.2.106.1.67 | INTEGER | read-only | For modem sessions, the modulation protocol used, if any. |
| INT sessionStatusReverseModemNumber | 1.3.6.1.4.1.2637.2.2.106.1.57 | INTEGER | read-only | The individual modem where this session is terminated, numbered from one to the maximum number of modems on the slot card. |
| INT sessionStatusReverseModemReceiveLineLevel | 1.3.6.1.4.1.2637.2.2.106.1.77 | INTEGER | read-only | For modem sessions, the receive line signal level. This value is given in dB. |
| INT sessionStatusReverseModemRemoteRenegotiations | 1.3.6.1.4.1.2637.2.2.106.1.76 | INTEGER | read-only | For modem sessions, the number of rate renegotiation requests sent by the remote modem. |
| INT sessionStatusReverseModemRemoteRetrains | 1.3.6.1.4.1.2637.2.2.106.1.74 | INTEGER | read-only | For modem sessions, the number of retrain requests sent by the remote modem. |
| INT sessionStatusReverseModemRetransmits | 1.3.6.1.4.1.2637.2.2.106.1.71 | INTEGER | read-only | For modem sessions, the number of packets retransmitted by the modem. |
| INT sessionStatusReverseModemSNR | 1.3.6.1.4.1.2637.2.2.106.1.72 | INTEGER | read-only | For modem sessions, the Signal-to-Noise Ratio measured at the start of the connection. This value is given in dB. |
| INT sessionStatusReverseModemTxBlocks | 1.3.6.1.4.1.2637.2.2.106.1.70 | INTEGER | read-only | For modem sessions, the number of blocks transmitted by the modem. |
| INT sessionStatusReverseMultiLinkId | 1.3.6.1.4.1.2637.2.2.106.1.35 | INTEGER | read-only | The multi-link identifier value for PPP calls where the multi-link protocol was negotiated. |
| STR sessionStatusReverseName | 1.3.6.1.4.1.2637.2.2.106.1.12 | DisplayString | read-only | The name of the connection peer for this session. During authentication of the session, this field may contain the name submitted by the peer. During this time, the value of timeOfService will be zero. When the value of timeOfService is nonzero, this field will contain a fully authenticated name. |
| INT sessionStatusReverseOctetsIn | 1.3.6.1.4.1.2637.2.2.106.1.31 | INTEGER | read-only | The number of octets received from the remote user. This value will be zero until a session is terminated. |
| INT sessionStatusReverseOctetsOut | 1.3.6.1.4.1.2637.2.2.106.1.32 | INTEGER | read-only | The number of octets sent to the remote user. This value will be zero until a session is terminated. |
| INT sessionStatusReverseOriginateMode | 1.3.6.1.4.1.2637.2.2.106.1.30 | INTEGER | read-only | The direction of the physical layer call associated with this session |
| INT sessionStatusReversePack | 1.3.6.1.4.1.2637.2.2.106.1.49 | INTEGER | read-only | The integrated circuit pack where this session is terminated. |
| INT sessionStatusReversePacketsIn | 1.3.6.1.4.1.2637.2.2.106.1.33 | INTEGER | read-only | The number of packets received from the remote user. This value will be zero until a session is terminated. |
| INT sessionStatusReversePacketsOut | 1.3.6.1.4.1.2637.2.2.106.1.34 | INTEGER | read-only | The number of packets sent to the remote user. This value will be zero until a session is terminated. |
| INT sessionStatusReversePermanentFlag | 1.3.6.1.4.1.2637.2.2.106.1.10 | INTEGER | read-only | This variable indicates whether this session is permanent(2), meaning a long-lasting locally administered session such as a Frame Relay PVC, or switched(1), meaning a short-lived session resulting from a switched call. |
| INT sessionStatusReversePort | 1.3.6.1.4.1.2637.2.2.106.1.36 | INTEGER | read-only | The number of the DS1 for this session, relative to layer1Slot. |
| IP sessionStatusReverseRemoteIP | 1.3.6.1.4.1.2637.2.2.106.1.13 | IpAddress | read-only | The connection peer's IP address. If the link is numbered, then this is the address assigned to the other end of the link. If the link is not numbered, this may be the single IP address of the peer. For PPP connections, this is the result of IPNCP negotiation. |
| IP sessionStatusReverseRemoteIPMask | 1.3.6.1.4.1.2637.2.2.106.1.14 | IpAddress | read-only | The connection peer's IP address mask, used in conjunction with remoteIP. |
| INT sessionStatusReverseRemoteIPXNetwork | 1.3.6.1.4.1.2637.2.2.106.1.78 | INTEGER | read-only | The IPX network assigned to the dial-up user. |
| STR sessionStatusReverseRemoteIPXNode | 1.3.6.1.4.1.2637.2.2.106.1.79 | DisplayString | read-only | The IPX Node number assisgned to the dial-up user |
| INT sessionStatusReverseRxEndDataRate | 1.3.6.1.4.1.2637.2.2.106.1.42 | INTEGER | read-only | The receive data rate at the end of a modem session. |
| INT sessionStatusReverseRxMaxDataRate | 1.3.6.1.4.1.2637.2.2.106.1.46 | INTEGER | read-only | The maximum receive data rate during a modem session. |
| INT sessionStatusReverseRxMinDataRate | 1.3.6.1.4.1.2637.2.2.106.1.44 | INTEGER | read-only | The minimum receive data rate during a modem session. |
| INT sessionStatusReverseRxStartDataRate | 1.3.6.1.4.1.2637.2.2.106.1.40 | INTEGER | read-only | The receive data rate for this session. In the case of modem sessions, this will be the DCE rate reported as a result of initial modem negotiation, and may not track rate chanes during the call. For ISDN sessions, this will be the actual data service rate of the call. For Frame Relay sessions, this will be the nominal speed of the Frame Relay Physical Interface, even though multiple sessions may be sharing that Physical Interface. For other sessions, this will be the nominal speed of the physical interface. In no case should this be interepreted as a Quality-of-Service guarantee, or as the current line utilization or effective bandwidth on the interface. Note also that in the case of PPP multilink, this specifies the rate of only this link in the bundle, and not the aggregate rate of all links in the bundle. |
| INT sessionStatusReverseServiceMode | 1.3.6.1.4.1.2637.2.2.106.1.18 | INTEGER | read-only | A description of which session service is being used by the session. |
| INT sessionStatusReverseSessionID | 1.3.6.1.4.1.2637.2.2.106.1.2 | INTEGER | read-only | The serial number of this session, a unique number for this boot era. When combined with the value of BootEra, provides a session number that is unique for the life of the system. Note that these are very sparsely numbered. |
| STR sessionStatusReverseSs7SessionId | 1.3.6.1.4.1.2637.2.2.106.1.56 | DisplayString | read-only | A uniquie identifier for this session within the ss7 Network. If this call was not originated using ss7 signalling, this string will be null. |
| INT sessionStatusReverseStartTime | 1.3.6.1.4.1.2637.2.2.106.1.19 | INTEGER | read-only | The time that this session began, in seconds since the system booted. |
| INT sessionStatusReverseState | 1.3.6.1.4.1.2637.2.2.106.1.3 | INTEGER | read-only | This variable indicates the state of this session. |
| INT sessionStatusReverseStopTime | 1.3.6.1.4.1.2637.2.2.106.1.20 | INTEGER | read-only | The time that this session stopped, in seconds since the system booted. This variable is only meaningful for sessions having the state inactive(0). |
| sessionStatusReverseTable | 1.3.6.1.4.1.2637.2.2.106 | not-accessible | Session Status Reverse Configuration Information. | |
| INT sessionStatusReverseTandemPort | 1.3.6.1.4.1.2637.2.2.106.1.62 | INTEGER | read-only | The port used for the outbound portion of a tandem call, if applicable. |
| INT sessionStatusReverseTandemTimeslot | 1.3.6.1.4.1.2637.2.2.106.1.63 | INTEGER | read-only | The timeslot used for the outbound portion of a tandem call, if applicable. |
| INT sessionStatusReverseTdmStream | 1.3.6.1.4.1.2637.2.2.106.1.51 | INTEGER | read-only | The TDM highway stream associated with this session. |
| INT sessionStatusReverseTdmTimeSlot | 1.3.6.1.4.1.2637.2.2.106.1.52 | INTEGER | read-only | The TDM highway time-slot associated with this session. |
| INT sessionStatusReverseTerminatingComponent | 1.3.6.1.4.1.2637.2.2.106.1.23 | INTEGER | read-only | The component which initiated termination of this session. In cases where there are multiple causes of session termination, only the first cause detected is reported. This variable is only meaningful for sessions having the state inactive(0). |
| INT sessionStatusReverseTerminationCause | 1.3.6.1.4.1.2637.2.2.106.1.24 | INTEGER | read-only | The cause which initiated termination of this session. In cases where there are multiple causes of session termination, only the first cause detected is reported. This variable is only meaningful for sessions having the state inactive(0). |
| STR sessionStatusReverseTerminationReason | 1.3.6.1.4.1.2637.2.2.106.1.53 | DisplayString | read-only | A textual description of the cause which initiated termination of this session. In cases where there are multiple causes of session termination, only the first cause detected is reported. |
| INT sessionStatusReverseTimeOfModemSync | 1.3.6.1.4.1.2637.2.2.106.1.21 | INTEGER | read-only | The time at which the modem synchronization completed, in seconds since the system booted. |
| INT sessionStatusReverseTimeOfService | 1.3.6.1.4.1.2637.2.2.106.1.22 | INTEGER | read-only | The time that this session entered its first negotiated or configured service, in seconds since the system booted. For example, for a session with serviceMode PPP, the time at which LCP and IPCP negotiations completed and the session was ready to forward user data. |
| INT sessionStatusReverseTimeslot | 1.3.6.1.4.1.2637.2.2.106.1.37 | INTEGER | read-only | The number of the DS0 for this session, relative to port. |
| INT sessionStatusReverseTunnelId | 1.3.6.1.4.1.2637.2.2.106.1.82 | INTEGER | read-only | Tunnel Id |
| INT sessionStatusReverseTunnelMediumType | 1.3.6.1.4.1.2637.2.2.106.1.59 | INTEGER | read-only | The tunneling medium protocol being used for this session. |
| IP sessionStatusReverseTunnelServerAddress | 1.3.6.1.4.1.2637.2.2.106.1.60 | IpAddress | read-only | The IP address of the remote machine terminating the tunnel for this session. |
| INT sessionStatusReverseTunnelType | 1.3.6.1.4.1.2637.2.2.106.1.58 | INTEGER | read-only | The tunneling protocol being used for this session. |
| INT sessionStatusReverseTxEndDataRate | 1.3.6.1.4.1.2637.2.2.106.1.41 | INTEGER | read-only | The transmit data rate at the end of a modem session. |
| INT sessionStatusReverseTxMaxDataRate | 1.3.6.1.4.1.2637.2.2.106.1.45 | INTEGER | read-only | The maximum transmit data rate during a modem session. |
| INT sessionStatusReverseTxMinDataRate | 1.3.6.1.4.1.2637.2.2.106.1.43 | INTEGER | read-only | The minimum transmit data rate during a modem session. |
| INT sessionStatusReverseTxStartDataRate | 1.3.6.1.4.1.2637.2.2.106.1.39 | INTEGER | read-only | The transmit DCE data rate for this session. In the case of modem sessions, this will be the DCE rate reported as a result of initial modem negotiation, and may not track rate chanes during the call. For ISDN sessions, this will be the actual data service rate of the call. For Frame Relay sessions, this will be the nominal speed of the Frame Relay Physical Interface, even though multiple sessions may be sharing that Physical Interface. For other sessions, this will be the nominal speed of the physical interface. In no case should this be interepreted as a Quality-of-Service guarantee, or as the current line utilization or effective bandwidth on the interface. Note also that in the case of PPP multilink, this specifies the rate of only this link in the bundle, and not the aggregate rate of all links in the bundle. |
| INT sessionStatusReverseVpopId | 1.3.6.1.4.1.2637.2.2.106.1.11 | INTEGER | read-only | The identifier of the VPOP (administrative Group) to which the session belongs. A value of 0 indicates the default VPOP. |
| INT sessionStatusRxEndDataRate | 1.3.6.1.4.1.2637.2.2.101.1.42 | INTEGER | read-only | The receive data rate at the end of a modem session. |
| INT sessionStatusRxMaxDataRate | 1.3.6.1.4.1.2637.2.2.101.1.46 | INTEGER | read-only | The maximum receive data rate during a modem session. |
| INT sessionStatusRxMinDataRate | 1.3.6.1.4.1.2637.2.2.101.1.44 | INTEGER | read-only | The minimum receive data rate during a modem session. |
| INT sessionStatusRxStartDataRate | 1.3.6.1.4.1.2637.2.2.101.1.40 | INTEGER | read-only | The receive data rate for this session. In the case of modem sessions, this will be the DCE rate reported as a result of initial modem negotiation, and may not track rate chanes during the call. For ISDN sessions, this will be the actual data service rate of the call. For Frame Relay sessions, this will be the nominal speed of the Frame Relay Physical Interface, even though multiple sessions may be sharing that Physical Interface. For other sessions, this will be the nominal speed of the physical interface. In no case should this be interepreted as a Quality-of-Service guarantee, or as the current line utilization or effective bandwidth on the interface. Note also that in the case of PPP multilink, this specifies the rate of only this link in the bundle, and not the aggregate rate of all links in the bundle. |
| INT sessionStatusServiceMode | 1.3.6.1.4.1.2637.2.2.101.1.18 | INTEGER | read-only | A description of which session service is being used by the session. |
| INT sessionStatusSessionID | 1.3.6.1.4.1.2637.2.2.101.1.2 | INTEGER | read-only | The serial number of this session, a unique number for this boot era. When combined with the value of BootEra, provides a session number that is unique for the life of the system. |
| STR sessionStatusSs7SessionId | 1.3.6.1.4.1.2637.2.2.101.1.56 | DisplayString | read-only | A uniquie identifier for this session within the ss7 Network. If this call was not originated using ss7 signalling, this string will be null. |
| INT sessionStatusStartTime | 1.3.6.1.4.1.2637.2.2.101.1.19 | INTEGER | read-only | The time that this session began, in seconds since the system booted. |
| INT sessionStatusState | 1.3.6.1.4.1.2637.2.2.101.1.3 | INTEGER | read-only | This variable indicates the state of this session. |
| INT sessionStatusStopTime | 1.3.6.1.4.1.2637.2.2.101.1.20 | INTEGER | read-only | The time that this session stopped, in seconds since the system booted. This variable is only meaningful for sessions having the state inactive(0). |
| sessionStatusTable | 1.3.6.1.4.1.2637.2.2.101 | not-accessible | This table describes both active and inactive sessions. The table contains all active sessions and the most recent inactive sessions, up to a combined total of SessionTableSize entries. This table is ordered by session serial number. As new entries are appended to the bottom of the table, the inactive entries with the oldest termination time get aged out from near the top of the table. | |
| INT sessionStatusTandemPort | 1.3.6.1.4.1.2637.2.2.101.1.62 | INTEGER | read-only | The port used for the outbound portion of a tandem call, if applicable. |
| INT sessionStatusTandemTimeslot | 1.3.6.1.4.1.2637.2.2.101.1.63 | INTEGER | read-only | The timeslot used for the outbound portion of a tandem call, if applicable. |
| INT sessionStatusTdmStream | 1.3.6.1.4.1.2637.2.2.101.1.51 | INTEGER | read-only | The TDM highway stream associated with this session. |
| INT sessionStatusTdmTimeSlot | 1.3.6.1.4.1.2637.2.2.101.1.52 | INTEGER | read-only | The TDM highway time-slot associated with this session. |
| INT sessionStatusTerminatingComponent | 1.3.6.1.4.1.2637.2.2.101.1.23 | INTEGER | read-only | The component which initiated termination of this session. In cases where there are multiple causes of session termination, only the first cause detected is reported. This variable is only meaningful for sessions having the state inactive(0). |
| INT sessionStatusTerminationCause | 1.3.6.1.4.1.2637.2.2.101.1.24 | INTEGER | read-only | The cause which initiated termination of this session. In cases where there are multiple causes of session termination, only the first cause detected is reported. This variable is only meaningful for sessions having the state inactive(0). |
| STR sessionStatusTerminationReason | 1.3.6.1.4.1.2637.2.2.101.1.53 | DisplayString | read-only | A textual description of the cause which initiated termination of this session. In cases where there are multiple causes of session termination, only the first cause detected is reported. |
| INT sessionStatusTimeOfModemSync | 1.3.6.1.4.1.2637.2.2.101.1.21 | INTEGER | read-only | The time at which the modem synchronization completed, in seconds since the system booted. |
| INT sessionStatusTimeOfService | 1.3.6.1.4.1.2637.2.2.101.1.22 | INTEGER | read-only | The time that this session entered its first negotiated or configured service, in seconds since the system booted. For example, for a session with serviceMode PPP, the time at which LCP and IPCP negotiations completed and the session was ready to forward user data. |
| INT sessionStatusTimeslot | 1.3.6.1.4.1.2637.2.2.101.1.37 | INTEGER | read-only | The number of the DS0 for this session, relative to port. |
| INT sessionStatusTunnelId | 1.3.6.1.4.1.2637.2.2.101.1.82 | INTEGER | read-only | Tunnel Id |
| INT sessionStatusTunnelMediumType | 1.3.6.1.4.1.2637.2.2.101.1.59 | INTEGER | read-only | The tunneling medium protocol being used for this session. |
| IP sessionStatusTunnelServerAddress | 1.3.6.1.4.1.2637.2.2.101.1.60 | IpAddress | read-only | The IP address of the remote machine terminating the tunnel for this session. |
| INT sessionStatusTunnelType | 1.3.6.1.4.1.2637.2.2.101.1.58 | INTEGER | read-only | The tunneling protocol being used for this session. |
| INT sessionStatusTxEndDataRate | 1.3.6.1.4.1.2637.2.2.101.1.41 | INTEGER | read-only | The transmit data rate at the end of a modem session. |
| INT sessionStatusTxMaxDataRate | 1.3.6.1.4.1.2637.2.2.101.1.45 | INTEGER | read-only | The maximum transmit data rate during a modem session. |
| INT sessionStatusTxMinDataRate | 1.3.6.1.4.1.2637.2.2.101.1.43 | INTEGER | read-only | The minimum transmit data rate during a modem session. |
| INT sessionStatusTxStartDataRate | 1.3.6.1.4.1.2637.2.2.101.1.39 | INTEGER | read-only | The transmit DCE data rate for this session. In the case of modem sessions, this will be the DCE rate reported as a result of initial modem negotiation, and may not track rate chanes during the call. For ISDN sessions, this will be the actual data service rate of the call. For Frame Relay sessions, this will be the nominal speed of the Frame Relay Physical Interface, even though multiple sessions may be sharing that Physical Interface. For other sessions, this will be the nominal speed of the physical interface. In no case should this be interepreted as a Quality-of-Service guarantee, or as the current line utilization or effective bandwidth on the interface. Note also that in the case of PPP multilink, this specifies the rate of only this link in the bundle, and not the aggregate rate of all links in the bundle. |
| INT sessionStatusVpopId | 1.3.6.1.4.1.2637.2.2.101.1.11 | INTEGER | read-only | The identifier of the VPOP (administrative Group) to which the session belongs. A value of 0 indicates the default VPOP. |
| INT sessionSummaryActiveAtmp | 1.3.6.1.4.1.2637.2.2.216.1.55 | INTEGER | read-only | The number of active atmp sessions. |
| INT sessionSummaryActiveCiscoHDLC | 1.3.6.1.4.1.2637.2.2.216.1.19 | INTEGER | read-only | The number of active ciscoHDLC sessions. |
| INT sessionSummaryActiveDvs | 1.3.6.1.4.1.2637.2.2.216.1.52 | INTEGER | read-only | The number of active dvs sessions. |
| INT sessionSummaryActiveFax | 1.3.6.1.4.1.2637.2.2.216.1.58 | INTEGER | read-only | The number of active fax sessions. |
| INT sessionSummaryActiveFrameRelay | 1.3.6.1.4.1.2637.2.2.216.1.16 | INTEGER | read-only | The number of active frameRelay sessions. |
| INT sessionSummaryActiveFtp | 1.3.6.1.4.1.2637.2.2.216.1.49 | INTEGER | read-only | The number of active ftp sessions. |
| INT sessionSummaryActiveHub | 1.3.6.1.4.1.2637.2.2.216.1.61 | INTEGER | read-only | The number of active hub sessions. |
| INT sessionSummaryActiveL2f | 1.3.6.1.4.1.2637.2.2.216.1.37 | INTEGER | read-only | The number of active l2f sessions. |
| INT sessionSummaryActiveL2tp | 1.3.6.1.4.1.2637.2.2.216.1.34 | INTEGER | read-only | The number of active l2tp sessions. |
| INT sessionSummaryActiveNone | 1.3.6.1.4.1.2637.2.2.216.1.4 | INTEGER | read-only | The number of active sessions where the service mode is not known. |
| INT sessionSummaryActiveOther | 1.3.6.1.4.1.2637.2.2.216.1.7 | INTEGER | read-only | The number of active sessions where the service mode is not known. |
| INT sessionSummaryActivePpp | 1.3.6.1.4.1.2637.2.2.216.1.10 | INTEGER | read-only | The number of active ppp sessions. |
| INT sessionSummaryActiveRawTCP | 1.3.6.1.4.1.2637.2.2.216.1.28 | INTEGER | read-only | The number of active rawTCP sessions. |
| INT sessionSummaryActiveRlogin | 1.3.6.1.4.1.2637.2.2.216.1.31 | INTEGER | read-only | The number of active rlogin sessions. |
| INT sessionSummaryActiveSlip | 1.3.6.1.4.1.2637.2.2.216.1.13 | INTEGER | read-only | The number of active slip sessions. |
| INT sessionSummaryActiveTandem | 1.3.6.1.4.1.2637.2.2.216.1.46 | INTEGER | read-only | The number of active tandem sessions. |
| INT sessionSummaryActiveTelnet | 1.3.6.1.4.1.2637.2.2.216.1.25 | INTEGER | read-only | The number of active telnet sessions. |
| INT sessionSummaryActiveTerminalServer | 1.3.6.1.4.1.2637.2.2.216.1.22 | INTEGER | read-only | The number of active terminalServer sessions. |
| INT sessionSummaryActiveTest | 1.3.6.1.4.1.2637.2.2.216.1.64 | INTEGER | read-only | The number of active test sessions. |
| INT sessionSummaryActiveTrunk | 1.3.6.1.4.1.2637.2.2.216.1.40 | INTEGER | read-only | The number of active trunk sessions. |
| INT sessionSummaryActiveUnknown | 1.3.6.1.4.1.2637.2.2.216.1.1 | INTEGER | read-only | The number of sessions active but not yet providing service. |
| INT sessionSummaryActiveVoice | 1.3.6.1.4.1.2637.2.2.216.1.43 | INTEGER | read-only | The number of active voice sessions. |
| sessionSummaryEntry | 1.3.6.1.4.1.2637.2.2.216.1 | not-accessible | This is the structure of entries in the sessionSummaryTable. | |
| INT sessionSummaryInactiveAtmp | 1.3.6.1.4.1.2637.2.2.216.1.57 | INTEGER | read-only | The number of atmp sessions which have been terminated. |
| INT sessionSummaryInactiveCiscoHDLC | 1.3.6.1.4.1.2637.2.2.216.1.21 | INTEGER | read-only | The number of ciscoHDLC sessions which have been terminated. |
| INT sessionSummaryInactiveDvs | 1.3.6.1.4.1.2637.2.2.216.1.54 | INTEGER | read-only | The number of dvs sessions which have been terminated. |
| INT sessionSummaryInactiveFax | 1.3.6.1.4.1.2637.2.2.216.1.60 | INTEGER | read-only | The number of fax sessions which have been terminated. |
| INT sessionSummaryInactiveFrameRelay | 1.3.6.1.4.1.2637.2.2.216.1.18 | INTEGER | read-only | The number of frameRelay sessions which have been terminated. |
| INT sessionSummaryInactiveFtp | 1.3.6.1.4.1.2637.2.2.216.1.51 | INTEGER | read-only | The number of ftp sessions which have been terminated. |
| INT sessionSummaryInactiveHub | 1.3.6.1.4.1.2637.2.2.216.1.63 | INTEGER | read-only | The number of hub sessions which have been terminated. |
| INT sessionSummaryInactiveL2f | 1.3.6.1.4.1.2637.2.2.216.1.39 | INTEGER | read-only | The number of l2f sessions which have been terminated. |
| INT sessionSummaryInactiveL2tp | 1.3.6.1.4.1.2637.2.2.216.1.36 | INTEGER | read-only | The number of l2tp sessions which have been terminated. |
| INT sessionSummaryInactiveNone | 1.3.6.1.4.1.2637.2.2.216.1.6 | INTEGER | read-only | The number of sessions which have been terminated where the service mode was not known. |
| INT sessionSummaryInactiveOther | 1.3.6.1.4.1.2637.2.2.216.1.9 | INTEGER | read-only | The number of sessions which have been terminated where the service mode was not known. |
| INT sessionSummaryInactivePpp | 1.3.6.1.4.1.2637.2.2.216.1.12 | INTEGER | read-only | The number of ppp sessions which have been terminated. |
| INT sessionSummaryInactiveRawTCP | 1.3.6.1.4.1.2637.2.2.216.1.30 | INTEGER | read-only | The number of rawTCP sessions which have been terminated. |
| INT sessionSummaryInactiveRlogin | 1.3.6.1.4.1.2637.2.2.216.1.33 | INTEGER | read-only | The number of rlogin sessions which have been terminated. |
| INT sessionSummaryInactiveSlip | 1.3.6.1.4.1.2637.2.2.216.1.15 | INTEGER | read-only | The number of slip sessions which have been terminated. |
| INT sessionSummaryInactiveTandem | 1.3.6.1.4.1.2637.2.2.216.1.48 | INTEGER | read-only | The number of tandem sessions which have been terminated. |
| INT sessionSummaryInactiveTelnet | 1.3.6.1.4.1.2637.2.2.216.1.27 | INTEGER | read-only | The number of telnet sessions which have been terminated. |
| INT sessionSummaryInactiveTerminalServer | 1.3.6.1.4.1.2637.2.2.216.1.24 | INTEGER | read-only | The number of terminalServer sessions which have been terminated. |
| INT sessionSummaryInactiveTest | 1.3.6.1.4.1.2637.2.2.216.1.66 | INTEGER | read-only | The number of test sessions which have been terminated. |
| INT sessionSummaryInactiveTrunk | 1.3.6.1.4.1.2637.2.2.216.1.42 | INTEGER | read-only | The number of trunk sessions which have been terminated. |
| INT sessionSummaryInactiveUnknown | 1.3.6.1.4.1.2637.2.2.216.1.3 | INTEGER | read-only | The number of sessions which terminated prior to providing service. |
| INT sessionSummaryInactiveVoice | 1.3.6.1.4.1.2637.2.2.216.1.45 | INTEGER | read-only | The number of voice sessions which have been terminated. |
| INT sessionSummaryMaximumAtmp | 1.3.6.1.4.1.2637.2.2.216.1.56 | INTEGER | read-only | The maximum number of active atmp sessions. |
| INT sessionSummaryMaximumCiscoHDLC | 1.3.6.1.4.1.2637.2.2.216.1.20 | INTEGER | read-only | The maximum number of active ciscoHDLC sessions. |
| INT sessionSummaryMaximumDvs | 1.3.6.1.4.1.2637.2.2.216.1.53 | INTEGER | read-only | The maximum number of active dvs sessions. |
| INT sessionSummaryMaximumFax | 1.3.6.1.4.1.2637.2.2.216.1.59 | INTEGER | read-only | The maximum number of active fax sessions. |
| INT sessionSummaryMaximumFrameRelay | 1.3.6.1.4.1.2637.2.2.216.1.17 | INTEGER | read-only | The maximum number of active frameRelay sessions. |
| INT sessionSummaryMaximumFtp | 1.3.6.1.4.1.2637.2.2.216.1.50 | INTEGER | read-only | The maximum number of active ftp sessions. |
| INT sessionSummaryMaximumHub | 1.3.6.1.4.1.2637.2.2.216.1.62 | INTEGER | read-only | The maximum number of active hub sessions. |
| INT sessionSummaryMaximumL2f | 1.3.6.1.4.1.2637.2.2.216.1.38 | INTEGER | read-only | The maximum number of active l2f sessions. |
| INT sessionSummaryMaximumL2tp | 1.3.6.1.4.1.2637.2.2.216.1.35 | INTEGER | read-only | The maximum number of active l2tp sessions. |
| INT sessionSummaryMaximumNone | 1.3.6.1.4.1.2637.2.2.216.1.5 | INTEGER | read-only | The maximum number of active sessions where the service mode is not known. |
| INT sessionSummaryMaximumOther | 1.3.6.1.4.1.2637.2.2.216.1.8 | INTEGER | read-only | The maximum number of active sessions where the service mode is not known. |
| INT sessionSummaryMaximumPpp | 1.3.6.1.4.1.2637.2.2.216.1.11 | INTEGER | read-only | The maximum number of active ppp sessions. |
| INT sessionSummaryMaximumRawTCP | 1.3.6.1.4.1.2637.2.2.216.1.29 | INTEGER | read-only | The maximum number of active rawTCP sessions. |
| INT sessionSummaryMaximumRlogin | 1.3.6.1.4.1.2637.2.2.216.1.32 | INTEGER | read-only | The maximum number of active rlogin sessions. |
| INT sessionSummaryMaximumSlip | 1.3.6.1.4.1.2637.2.2.216.1.14 | INTEGER | read-only | The maximum number of active slip sessions. |
| INT sessionSummaryMaximumTandem | 1.3.6.1.4.1.2637.2.2.216.1.47 | INTEGER | read-only | The maximum number of active tandem sessions. |
| INT sessionSummaryMaximumTelnet | 1.3.6.1.4.1.2637.2.2.216.1.26 | INTEGER | read-only | The maximum number of active telnet sessions. |
| INT sessionSummaryMaximumTerminalServer | 1.3.6.1.4.1.2637.2.2.216.1.23 | INTEGER | read-only | The maximum number of active terminalServer sessions. |
| INT sessionSummaryMaximumTest | 1.3.6.1.4.1.2637.2.2.216.1.65 | INTEGER | read-only | The maximum number of active test sessions. |
| INT sessionSummaryMaximumTotal | 1.3.6.1.4.1.2637.2.2.216.1.67 | INTEGER | read-only | The maximum number of active calls achieved on the system. |
| INT sessionSummaryMaximumTrunk | 1.3.6.1.4.1.2637.2.2.216.1.41 | INTEGER | read-only | The maximum number of active trunk sessions. |
| INT sessionSummaryMaximumUnknown | 1.3.6.1.4.1.2637.2.2.216.1.2 | INTEGER | read-only | The maximum number of sessions active but not yet providing service. |
| INT sessionSummaryMaximumVoice | 1.3.6.1.4.1.2637.2.2.216.1.44 | INTEGER | read-only | The maximum number of active voice sessions. |
| sessionSummaryTable | 1.3.6.1.4.1.2637.2.2.216 | not-accessible | A summary of all session activity. | |
| INT sessionTraceAbsoluteTimeStamp | 1.3.6.1.4.1.2637.2.2.214.1.3 | INTEGER | read-only | The time that this event occurred, in milliseconds relative to SysUpTime. |
| sessionTraceEntry | 1.3.6.1.4.1.2637.2.2.214.1 | not-accessible | This is the structure of entries in the sessionTraceTable. | |
| INT sessionTraceIndex | 1.3.6.1.4.1.2637.2.2.214.1.2 | INTEGER | read-only | The internal reference number for this log entry. |
| STR sessionTraceLogEntry | 1.3.6.1.4.1.2637.2.2.214.1.5 | DisplayString | read-only | An event occuring during the life of a session. |
| INT sessionTraceRelativeTimeStamp | 1.3.6.1.4.1.2637.2.2.214.1.4 | INTEGER | read-only | The time that this event occurred, in milliseconds relative to session beginning. |
| INT sessionTraceSessionIndex | 1.3.6.1.4.1.2637.2.2.214.1.1 | INTEGER | read-only | The serial number of the session to which this component belongs. |
| sessionTraceTable | 1.3.6.1.4.1.2637.2.2.214 | not-accessible | Session Trace Configuration Information. | |
| INT sessionVpopCallType | 1.3.6.1.4.1.2637.2.2.218.1.3 | INTEGER | read-only | Data link call type |
| INT sessionVpopCumulativeCount | 1.3.6.1.4.1.2637.2.2.218.1.7 | INTEGER | read-only | The cumulative number of sessions of this type, for this vpop, both active and inactive, since system boot |
| INT sessionVpopCumulativeDuration | 1.3.6.1.4.1.2637.2.2.218.1.8 | INTEGER | read-only | The combined duration of of all sessions of this type, for this vpop, both active and inactive, since system boot |
| INT sessionVpopCurrentCount | 1.3.6.1.4.1.2637.2.2.218.1.5 | INTEGER | read-only | The number of sessions currently active |
| INT sessionVpopCurrentDuration | 1.3.6.1.4.1.2637.2.2.218.1.6 | INTEGER | read-only | The combined duration of all currently active sessions of this type, for this vpop. |
| sessionVpopEntry | 1.3.6.1.4.1.2637.2.2.218.1 | not-accessible | This is the structure of entries in the sessionVpopTable. | |
| INT sessionVpopProtocol | 1.3.6.1.4.1.2637.2.2.218.1.4 | INTEGER | read-only | Transport protocol |
| sessionVpopTable | 1.3.6.1.4.1.2637.2.2.218 | not-accessible | Session VPOP Information. | |
| INT sessionVpopVpopId | 1.3.6.1.4.1.2637.2.2.218.1.2 | INTEGER | read-only | VPOP Id (zero based). |
| INT sessionVpopVpopIndex | 1.3.6.1.4.1.2637.2.2.218.1.1 | INTEGER | read-only | vpop Index (one based). |
| slotStatusEntry | 1.3.6.1.4.1.2637.2.2.201.1 | not-accessible | This is the structure of entries in the slotStatusTable. | |
| STR slotStatusFirmwareRev | 1.3.6.1.4.1.2637.2.2.201.1.8 | DisplayString | read-only | The revision string of the firmware running on the card, as reported by the firmware. |
| STR slotStatusHardwareRev | 1.3.6.1.4.1.2637.2.2.201.1.6 | DisplayString | read-only | The hardware revision of the card, as reported by the slot card hardware. If the slot card does not report a value, or if it is not currently readable, then this variable will have the value of zero. |
| INT slotStatusLineTerminationModule | 1.3.6.1.4.1.2637.2.2.201.1.15 | INTEGER | read-only | The part number of the line termination module in this slot. |
| slotStatusNewEntry | 1.3.6.1.4.1.2637.2.2.205.1 | not-accessible | This is the structure of entries in the slotStatusNewTable. | |
| STR slotStatusNewFabricationRev | 1.3.6.1.4.1.2637.2.2.205.1.7 | DisplayString | read-only | The hardware revision of the card, as reported by the slot card hardware. If the slot card does not report a value, or if it is not currently readable, then this variable will have the value of zero. |
| STR slotStatusNewFirmwareRev | 1.3.6.1.4.1.2637.2.2.205.1.10 | DisplayString | read-only | The revision string of the firmware running on the card, as reported by the firmware. |
| INT slotStatusNewLineTerminationModuleType | 1.3.6.1.4.1.2637.2.2.205.1.13 | INTEGER | read-only | The type of line termination module connected to the card in this slot. If no line termination module is connected, this value is 0. |
| STR slotStatusNewPalRev | 1.3.6.1.4.1.2637.2.2.205.1.8 | DisplayString | read-only | The PAL revision of the card, as reported by the slot card hardware. If the slot card does not report a value, or if it is not currently readable, then this variable will have the value of zero. |
| STR slotStatusNewProductCode | 1.3.6.1.4.1.2637.2.2.205.1.5 | DisplayString | read-only | Identifies the card in this slot by part number. |
| INT slotStatusNewReworkRev | 1.3.6.1.4.1.2637.2.2.205.1.9 | INTEGER | read-only | The rework revision of the card, as reported by the slot card hardware. If the slot card does not report a value, or if it is not currently readable, then this variable will have the value of zero. |
| INT slotStatusNewShelfNumber | 1.3.6.1.4.1.2637.2.2.205.1.1 | INTEGER | read-only | The number of the shelf in which this slot resides. |
| INT slotStatusNewSlotIndex | 1.3.6.1.4.1.2637.2.2.205.1.2 | INTEGER | read-only | The physical slot number. |
| INT slotStatusNewSlotOos | 1.3.6.1.4.1.2637.2.2.205.1.12 | INTEGER | read-only | Current oos value for this slot. |
| STR slotStatusNewSlotSerialNumber | 1.3.6.1.4.1.2637.2.2.205.1.6 | DisplayString | read-only | The serial number of the card, as reported by the slot card hardware. If the slot card does not report a value, or if it is not currently readable, then this variable will have the value of zero. |
| INT slotStatusNewSlotStatus | 1.3.6.1.4.1.2637.2.2.205.1.3 | INTEGER | read-only | The current state of the slot card. |
| INT slotStatusNewSlotType | 1.3.6.1.4.1.2637.2.2.205.1.4 | INTEGER | read-only | The general type of the slot card. More specific detail on the type of card may be found in serviceModule and lineTerminationModule variables. |
| slotStatusNewTable | 1.3.6.1.4.1.2637.2.2.205 | not-accessible | This table describes the status of the physical slots in a CVX switch. NOTE: cards in the CVX chassis report two card types per slot. The Service Module is the main logic board, residing in the 'front' of the slot. The Line Termination Module, residing in the 'back' of the slot, houses the data and power connectors for the system. This table replaces the slot_status table which should be considered obsolete. | |
| INT slotStatusNewTemperature | 1.3.6.1.4.1.2637.2.2.205.1.11 | INTEGER | read-only | The temperature of the slot card as reported by hardware, in degrees Celsius. |
| INT slotStatusOtherMem | 1.3.6.1.4.1.2637.2.2.201.1.10 | INTEGER | read-only | The amount of memory, in Kilobytes, in the card's auxilliary memory region. If that amount is unknown, then this variable will have the value of zero. NOTE that the exact nature and use of this memory may vary by slot card. |
| INT slotStatusPartNumber | 1.3.6.1.4.1.2637.2.2.201.1.4 | INTEGER | read-only | Identifies the card in this slot by part number, The OID will be defined in the aptis-reg.aptis-components subtree. |
| INT slotStatusSerialNumber | 1.3.6.1.4.1.2637.2.2.201.1.5 | INTEGER | read-only | The serial number of the card, as reported by the slot card hardware. If the slot card does not report a value, or if it is not currently readable, then this variable will have the value of zero. |
| INT slotStatusServiceModule | 1.3.6.1.4.1.2637.2.2.201.1.14 | INTEGER | read-only | The part number of the Service Module in this slot. |
| INT slotStatusShelfNumber | 1.3.6.1.4.1.2637.2.2.201.1.1 | INTEGER | read-only | The number of the shelf in which this slot resides. |
| INT slotStatusSlotIndex | 1.3.6.1.4.1.2637.2.2.201.1.2 | INTEGER | read-only | The physical slot number. |
| INT slotStatusSlotOos | 1.3.6.1.4.1.2637.2.2.201.1.13 | INTEGER | read-only | Current oos value for this slot. |
| INT slotStatusSlotStatus | 1.3.6.1.4.1.2637.2.2.201.1.3 | INTEGER | read-only | The current state of the slot card. |
| INT slotStatusSlotType | 1.3.6.1.4.1.2637.2.2.201.1.12 | INTEGER | read-only | The general type of the slot card. More specific detail on the type of card may be found in serviceModule and lineTerminationModule variables. |
| STR slotStatusStiffwareRev | 1.3.6.1.4.1.2637.2.2.201.1.7 | DisplayString | read-only | The stiffware revision of the card, as reported by the slot card hardware. If the slot card does not report a value, or if it is not currently readable, then this variable will have the value of zero. |
| INT slotStatusSystemMem | 1.3.6.1.4.1.2637.2.2.201.1.9 | INTEGER | read-only | The amount of memory, in Kilobytes, in the card's main memory region. If that amount is unknown, then this variable will have the value of zero. |
| slotStatusTable | 1.3.6.1.4.1.2637.2.2.201 | not-accessible | This table describes the status of the physical slots in a CVX switch. NOTE: cards in the CVX chassis report two card types per slot. The Service Module is the main logic board, residing in the 'front' of the slot. The Line Termination Module, residing in the 'back' of the slot, houses the data and power connectors for the system. | |
| INT slotStatusTemperature | 1.3.6.1.4.1.2637.2.2.201.1.11 | INTEGER | read-only | The temperature of the slot card as reported by hardware, in degrees Celsius. |
| softwareVersionEntry | 1.3.6.1.4.1.2637.2.2.12.1 | not-accessible | This is the structure of entries in the softwareVersionTable. | |
| INT softwareVersionMibRevision | 1.3.6.1.4.1.2637.2.2.12.1.4 | INTEGER | read-only | The revision number of the Aptis Enterprise MIB supported by this sytem. This number is incremented every time the MIB changes during development. |
| INT softwareVersionMibVersion | 1.3.6.1.4.1.2637.2.2.12.1.1 | INTEGER | read-only | The version of the Aptis Enterprise MIB supported by this member. This number changes with every release of the software. |
| INT softwareVersionProductId | 1.3.6.1.4.1.2637.2.2.12.1.3 | INTEGER | read-only | The version of the CVX software running on this system. |
| STR softwareVersionSoftwareRevision | 1.3.6.1.4.1.2637.2.2.12.1.2 | DisplayString | read-only | The version of the CVX software running on this system. |
| softwareVersionTable | 1.3.6.1.4.1.2637.2.2.12 | not-accessible | The software version numbers for the system. | |
| INT ss7CountersDsmccFree | 1.3.6.1.4.1.2637.2.2.503.1.7 | INTEGER | read-only | The number of free dsmcc message control blocks. |
| INT ss7CountersDsmccFull | 1.3.6.1.4.1.2637.2.2.503.1.8 | INTEGER | read-only | The number of full dsmcc message control blocks. |
| ss7CountersEntry | 1.3.6.1.4.1.2637.2.2.503.1 | not-accessible | This is the structure of entries in the ss7CountersTable. | |
| INT ss7CountersNumActive | 1.3.6.1.4.1.2637.2.2.503.1.1 | INTEGER | read-only | The number of active ss7 sessions. |
| INT ss7CountersNumInactive | 1.3.6.1.4.1.2637.2.2.503.1.2 | INTEGER | read-only | The number of inactive ss7 sessions. |
| INT ss7CountersOneshotFree | 1.3.6.1.4.1.2637.2.2.503.1.5 | INTEGER | read-only | The number of free status message blocks. |
| INT ss7CountersOneshotFull | 1.3.6.1.4.1.2637.2.2.503.1.6 | INTEGER | read-only | The number of full status message blocks. |
| INT ss7CountersRetainedFree | 1.3.6.1.4.1.2637.2.2.503.1.3 | INTEGER | read-only | The number of free signaling message blocks. |
| INT ss7CountersRetainedFull | 1.3.6.1.4.1.2637.2.2.503.1.4 | INTEGER | read-only | The number of full signaling message blocks. |
| ss7CountersTable | 1.3.6.1.4.1.2637.2.2.503 | not-accessible | ss7 counters table. | |
| STR ss7StatusCalledId | 1.3.6.1.4.1.2637.2.2.500.1.4 | DisplayString | read-only | The called number for this session. |
| STR ss7StatusCallingId | 1.3.6.1.4.1.2637.2.2.500.1.5 | DisplayString | read-only | The calling number for this session. |
| INT ss7StatusCallType | 1.3.6.1.4.1.2637.2.2.500.1.6 | INTEGER | read-only | The call type for this session. |
| ss7StatusEntry | 1.3.6.1.4.1.2637.2.2.500.1 | not-accessible | This is the structure of entries in the ss7StatusTable. | |
| INT ss7StatusIndex | 1.3.6.1.4.1.2637.2.2.500.1.1 | INTEGER | read-only | The serial number of this ss7 session. |
| STR ss7StatusNetworkId | 1.3.6.1.4.1.2637.2.2.500.1.3 | DisplayString | read-only | The INC assigned session Id for this session. |
| INT ss7StatusPort | 1.3.6.1.4.1.2637.2.2.500.1.8 | INTEGER | read-only | The DS1 specified by the thruway controller to terminate this session. |
| STR ss7StatusReverseCalledId | 1.3.6.1.4.1.2637.2.2.502.1.4 | DisplayString | read-only | The called number for this session. |
| STR ss7StatusReverseCallingId | 1.3.6.1.4.1.2637.2.2.502.1.5 | DisplayString | read-only | The calling number for this session. |
| INT ss7StatusReverseCallType | 1.3.6.1.4.1.2637.2.2.502.1.6 | INTEGER | read-only | The call type for this session. |
| ss7StatusReverseEntry | 1.3.6.1.4.1.2637.2.2.502.1 | not-accessible | This is the structure of entries in the ss7StatusReverseTable. | |
| INT ss7StatusReverseIndex | 1.3.6.1.4.1.2637.2.2.502.1.1 | INTEGER | read-only | The serial number of this ss7 session. |
| STR ss7StatusReverseNetworkId | 1.3.6.1.4.1.2637.2.2.502.1.3 | DisplayString | read-only | The INC assigned session Id for this session. |
| INT ss7StatusReversePort | 1.3.6.1.4.1.2637.2.2.502.1.8 | INTEGER | read-only | The DS1 specified by the thruway controller to terminate this session. |
| STR ss7StatusReverseServerId | 1.3.6.1.4.1.2637.2.2.502.1.11 | DisplayString | read-only | The server identifier for the network controller responsible for initiating this session. |
| INT ss7StatusReverseSessionId | 1.3.6.1.4.1.2637.2.2.502.1.10 | INTEGER | read-only | The session Id assigned to this session by the CVX (0 if unknown). |
| INT ss7StatusReverseSlot | 1.3.6.1.4.1.2637.2.2.502.1.7 | INTEGER | read-only | The slot specified by the thruway controller to terminate this session. |
| INT ss7StatusReverseStartTime | 1.3.6.1.4.1.2637.2.2.502.1.12 | INTEGER | read-only | The time that this session began. |
| STR ss7StatusReverseState | 1.3.6.1.4.1.2637.2.2.502.1.2 | DisplayString | read-only | The current state of this session. |
| ss7StatusReverseTable | 1.3.6.1.4.1.2637.2.2.502 | not-accessible | ss7 status reverse table. | |
| INT ss7StatusReverseTimeSlot | 1.3.6.1.4.1.2637.2.2.502.1.9 | INTEGER | read-only | The DS0 specified by the thruway controller to terminate this session. |
| STR ss7StatusServerId | 1.3.6.1.4.1.2637.2.2.500.1.11 | DisplayString | read-only | The server identifier for the network controller responsible for initiating this session. |
| INT ss7StatusSessionId | 1.3.6.1.4.1.2637.2.2.500.1.10 | INTEGER | read-only | The session Id assigned to this session by the CVX (0 if unknown). |
| INT ss7StatusSlot | 1.3.6.1.4.1.2637.2.2.500.1.7 | INTEGER | read-only | The slot specified by the thruway controller to terminate this session. |
| INT ss7StatusStartTime | 1.3.6.1.4.1.2637.2.2.500.1.12 | INTEGER | read-only | The time that this session began. |
| STR ss7StatusState | 1.3.6.1.4.1.2637.2.2.500.1.2 | DisplayString | read-only | The current state of this session. |
| ss7StatusTable | 1.3.6.1.4.1.2637.2.2.500 | not-accessible | ss7 status table. | |
| INT ss7StatusTimeSlot | 1.3.6.1.4.1.2637.2.2.500.1.9 | INTEGER | read-only | The DS0 specified by the thruway controller to terminate this session. |
| INT ss7TraceAbsoluteTimeStamp | 1.3.6.1.4.1.2637.2.2.501.1.3 | INTEGER | read-only | The time that this event occurred, in milliseconds relative to SysUpTime. |
| ss7TraceEntry | 1.3.6.1.4.1.2637.2.2.501.1 | not-accessible | This is the structure of entries in the ss7TraceTable. | |
| INT ss7TraceIndex | 1.3.6.1.4.1.2637.2.2.501.1.2 | INTEGER | read-only | The internal reference number for this log entry. |
| STR ss7TraceLogEntry | 1.3.6.1.4.1.2637.2.2.501.1.5 | DisplayString | read-only | An event occuring during the life of an ss7 session. |
| INT ss7TraceRelativeTimeStamp | 1.3.6.1.4.1.2637.2.2.501.1.4 | INTEGER | read-only | The time that this event occurred, in milliseconds relative to session beginning. |
| INT ss7TraceSs7Index | 1.3.6.1.4.1.2637.2.2.501.1.1 | INTEGER | read-only | The serial number of the ss7 session to which this component belongs. |
| ss7TraceTable | 1.3.6.1.4.1.2637.2.2.501 | not-accessible | ss7 trace table. | |
| OCT systemSummaryData | 1.3.6.1.4.1.2637.2.2.10.1.1 | OCTET STRING | read-only | This is 8-bit binary data. Don't even try to display it. |
| systemSummaryEntry | 1.3.6.1.4.1.2637.2.2.10.1 | not-accessible | This is the structure of entries in the systemSummaryTable. | |
| systemSummaryTable | 1.3.6.1.4.1.2637.2.2.10 | not-accessible | This is a tagged data structure with a summary of various status variables from throughout the CVX system. It is not human-readable and is intended for consumption by the NMS. | |
| systemTimeEntry | 1.3.6.1.4.1.2637.2.2.15.1 | not-accessible | This is the structure of entries in the systemTimeTable. | |
| INT systemTimeFixedBootTime | 1.3.6.1.4.1.2637.2.2.15.1.1 | INTEGER | read-only | The UTC time of system boot, in seconds relative to 00:00:00 on Jan 1, 1900. This value will be unaffected by time management protocols such as NTP. |
| systemTimeTable | 1.3.6.1.4.1.2637.2.2.15 | not-accessible | This class provides some time values that are global to the system. | |
| INT systemTimeUpTime | 1.3.6.1.4.1.2637.2.2.15.1.3 | INTEGER | read-only | The number of seconds since the last system reboot. Similar to SysUpTime but is in seconds resolution instead of TimeTicks. |
| INT systemTimeUTCOffset | 1.3.6.1.4.1.2637.2.2.15.1.2 | INTEGER | read-only | The offset from UTC, in seconds. Useful for displaying system time in a local format. |
| INT t1CountsChannelCount | 1.3.6.1.4.1.2637.2.2.2103.1.1 | INTEGER | read-only | DS0s (B-channels) on this interface. |
| INT t1CountsChannelsInUse | 1.3.6.1.4.1.2637.2.2.2103.1.2 | INTEGER | read-only | DS0s (B-channels) in use. |
| t1CountsEntry | 1.3.6.1.4.1.2637.2.2.2103.1 | not-accessible | This is the structure of entries in the t1CountsTable. | |
| INT t1CountsIncomingCallAttempts | 1.3.6.1.4.1.2637.2.2.2103.1.3 | INTEGER | read-only | Incoming call attempts on this T1. |
| INT t1CountsIncomingConnects | 1.3.6.1.4.1.2637.2.2.2103.1.4 | INTEGER | read-only | Incoming connect messages. |
| INT t1CountsIncomingDisconnects | 1.3.6.1.4.1.2637.2.2.2103.1.5 | INTEGER | read-only | Incoming disconnect messages. |
| INT t1CountsLineNumber | 1.3.6.1.4.1.2637.2.2.2103.1.11 | INTEGER | read-only | The line number of the line to which the Alarm Status applies. |
| INT t1CountsOutgoingCallAttempts | 1.3.6.1.4.1.2637.2.2.2103.1.6 | INTEGER | read-only | Outgoing call attempts on this T1. |
| INT t1CountsOutgoingConnects | 1.3.6.1.4.1.2637.2.2.2103.1.7 | INTEGER | read-only | Outgoing connect messages. |
| INT t1CountsOutgoingDisconnects | 1.3.6.1.4.1.2637.2.2.2103.1.8 | INTEGER | read-only | Outgoing disconnect messages. |
| INT t1CountsSessionAbortMessages | 1.3.6.1.4.1.2637.2.2.2103.1.9 | INTEGER | read-only | Abort messages from the session manager |
| INT t1CountsSlotIndex | 1.3.6.1.4.1.2637.2.2.2103.1.10 | INTEGER | read-only | The physical slot number associated with this line. |
| t1CountsTable | 1.3.6.1.4.1.2637.2.2.2103 | not-accessible | T1 Interface Counters. | |
| INT t1StatsAlarmStatus | 1.3.6.1.4.1.2637.2.2.2102.1.1 | INTEGER | read-only | T1 layer 1 alarms. |
| t1StatsEntry | 1.3.6.1.4.1.2637.2.2.2102.1 | not-accessible | This is the structure of entries in the t1StatsTable. | |
| INT t1StatsLineNumber | 1.3.6.1.4.1.2637.2.2.2102.1.3 | INTEGER | read-only | The line number of the line to which the Alarm Status applies. |
| INT t1StatsSlotIndex | 1.3.6.1.4.1.2637.2.2.2102.1.2 | INTEGER | read-only | The physical slot number associated with this line. |
| t1StatsTable | 1.3.6.1.4.1.2637.2.2.2102 | not-accessible | T1 Stats. | |
| INT t1SummaryStatsClearingChannels | 1.3.6.1.4.1.2637.2.2.2104.1.3 | INTEGER | read-only | Bit mask of b-channels that have calls going down, with b-channel 1 at 0x02, 2 at 0x04, etc. |
| INT t1SummaryStatsConnectedChannels | 1.3.6.1.4.1.2637.2.2.2104.1.2 | INTEGER | read-only | Bit mask of b-channels that have calls connected, with b-channel 1 at 0x02, 2 at 0x04, etc. |
| t1SummaryStatsEntry | 1.3.6.1.4.1.2637.2.2.2104.1 | not-accessible | This is the structure of entries in the t1SummaryStatsTable. | |
| INT t1SummaryStatsFunctionalChannels | 1.3.6.1.4.1.2637.2.2.2104.1.6 | INTEGER | read-only | Bit mask of b-channels that are in the functional state. |
| INT t1SummaryStatsIdleChannels | 1.3.6.1.4.1.2637.2.2.2104.1.7 | INTEGER | read-only | Bit mask of b-channels that are in the idle state. |
| INT t1SummaryStatsLineNumber | 1.3.6.1.4.1.2637.2.2.2104.1.5 | INTEGER | read-only | The line number of the line to which the Alarm Status applies. |
| INT t1SummaryStatsRingingChannels | 1.3.6.1.4.1.2637.2.2.2104.1.1 | INTEGER | read-only | Bit mask of b-channels that have calls coming up, with b-channel 1 at 0x02, 2 at 0x04, etc. |
| INT t1SummaryStatsSlotIndex | 1.3.6.1.4.1.2637.2.2.2104.1.4 | INTEGER | read-only | The physical slot number associated with this line. |
| t1SummaryStatsTable | 1.3.6.1.4.1.2637.2.2.2104 | not-accessible | T1 Line Summary Stats. | |
| INT t3StatsActiveDs1Count | 1.3.6.1.4.1.2637.2.2.2008.1.6 | INTEGER | read-only | The number of active DS1 lines on this T3. |
| INT t3StatsDs1Count | 1.3.6.1.4.1.2637.2.2.2008.1.5 | INTEGER | read-only | The number of DS1 lines on this T3. |
| t3StatsEntry | 1.3.6.1.4.1.2637.2.2.2008.1 | not-accessible | This is the structure of entries in the t3StatsTable. | |
| BOO t3StatsExternalClockPort | 1.3.6.1.4.1.2637.2.2.2008.1.7 | Boolean | read-only | Whether this T3 LTM has an external clock reference port. (only available on some models) |
| INT t3StatsLineNumber | 1.3.6.1.4.1.2637.2.2.2008.1.3 | INTEGER | read-only | The line number of the line to which the Line State applies. |
| INT t3StatsLineState | 1.3.6.1.4.1.2637.2.2.2008.1.1 | INTEGER | read-only | Current state of this line. |
| BOO t3StatsRedundant | 1.3.6.1.4.1.2637.2.2.2008.1.4 | Boolean | read-only | Whether this T3 has a redundant backup. |
| INT t3StatsSlotIndex | 1.3.6.1.4.1.2637.2.2.2008.1.2 | INTEGER | read-only | The physical slot number associated with this line. |
| t3StatsTable | 1.3.6.1.4.1.2637.2.2.2008 | not-accessible | T3 Line Stats. | |
| INT taskStatsTableContextSwitches | 1.3.6.1.4.1.2637.2.2.3606.1.42 | INTEGER | read-only | Task context switches since creation |
| taskStatsTableEntry | 1.3.6.1.4.1.2637.2.2.3606.1 | not-accessible | This is the structure of entries in the taskStatsTableTable. | |
| INT taskStatsTableGlobalPool | 1.3.6.1.4.1.2637.2.2.3606.1.43 | INTEGER | read-only | Global pool used by task |
| INT taskStatsTableIdle5Minute | 1.3.6.1.4.1.2637.2.2.3606.1.52 | INTEGER | read-only | Total processor idle time last 5 minutes |
| INT taskStatsTableIdle5Seconds | 1.3.6.1.4.1.2637.2.2.3606.1.50 | INTEGER | read-only | Total processor idle time last 5 seconds |
| INT taskStatsTableIdleDay | 1.3.6.1.4.1.2637.2.2.3606.1.54 | INTEGER | read-only | Total processor idle time last day |
| INT taskStatsTableIdleHour | 1.3.6.1.4.1.2637.2.2.3606.1.53 | INTEGER | read-only | Total processor idle time last hour |
| INT taskStatsTableIdleMinute | 1.3.6.1.4.1.2637.2.2.3606.1.51 | INTEGER | read-only | Total processor idle time last minute |
| INT taskStatsTableIntervalSize | 1.3.6.1.4.1.2637.2.2.3606.1.46 | INTEGER | read-only | Run time for all in miliseconds in last interval |
| INT taskStatsTableIntervalTime | 1.3.6.1.4.1.2637.2.2.3606.1.44 | INTEGER | read-only | Total task run time in miliseconds since last request |
| STR taskStatsTableIsrTimes | 1.3.6.1.4.1.2637.2.2.3606.1.49 | DisplayString | read-only | Time spent processor isr routines |
| INT taskStatsTableKernelPool | 1.3.6.1.4.1.2637.2.2.3606.1.47 | INTEGER | read-only | Memory used by kernel |
| INT taskStatsTableRunTime | 1.3.6.1.4.1.2637.2.2.3606.1.41 | INTEGER | read-only | Total task run time in miliseconds |
| INT taskStatsTableSlotNumber | 1.3.6.1.4.1.2637.2.2.3606.1.1 | INTEGER | read-only | Slot number |
| INT taskStatsTableStackAddress1 | 1.3.6.1.4.1.2637.2.2.3606.1.31 | INTEGER | read-only | Stack address 1 |
| INT taskStatsTableStackAddress10 | 1.3.6.1.4.1.2637.2.2.3606.1.40 | INTEGER | read-only | Stack address 10 |
| INT taskStatsTableStackAddress2 | 1.3.6.1.4.1.2637.2.2.3606.1.32 | INTEGER | read-only | Stack address 2 |
| INT taskStatsTableStackAddress3 | 1.3.6.1.4.1.2637.2.2.3606.1.33 | INTEGER | read-only | Stack address 3 |
| INT taskStatsTableStackAddress4 | 1.3.6.1.4.1.2637.2.2.3606.1.34 | INTEGER | read-only | Stack address 4 |
| INT taskStatsTableStackAddress5 | 1.3.6.1.4.1.2637.2.2.3606.1.35 | INTEGER | read-only | Stack address 5 |
| INT taskStatsTableStackAddress6 | 1.3.6.1.4.1.2637.2.2.3606.1.36 | INTEGER | read-only | Stack address 6 |
| INT taskStatsTableStackAddress7 | 1.3.6.1.4.1.2637.2.2.3606.1.37 | INTEGER | read-only | Stack address 7 |
| INT taskStatsTableStackAddress8 | 1.3.6.1.4.1.2637.2.2.3606.1.38 | INTEGER | read-only | Stack address 8 |
| INT taskStatsTableStackAddress9 | 1.3.6.1.4.1.2637.2.2.3606.1.39 | INTEGER | read-only | Stack address 9 |
| taskStatsTableTable | 1.3.6.1.4.1.2637.2.2.3606 | not-accessible | task stats table | |
| INT taskStatsTableTaskID | 1.3.6.1.4.1.2637.2.2.3606.1.3 | INTEGER | read-only | Task ID |
| INT taskStatsTableTaskIndex | 1.3.6.1.4.1.2637.2.2.3606.1.2 | INTEGER | read-only | Task index. This is a sequential number. |
| STR taskStatsTableTaskName | 1.3.6.1.4.1.2637.2.2.3606.1.4 | DisplayString | read-only | Task Name |
| INT taskStatsTableTaskPool | 1.3.6.1.4.1.2637.2.2.3606.1.48 | INTEGER | read-only | Total memory allocated by tasks |
| OCT taskStatsTableTCB | 1.3.6.1.4.1.2637.2.2.3606.1.12 | OCTET STRING | read-only | PSOS TCB Data |
| INT taskStatsTableTCBSize | 1.3.6.1.4.1.2637.2.2.3606.1.11 | INTEGER | read-only | Size in bytes of TCB |
| INT taskStatsTableTicksElapsed | 1.3.6.1.4.1.2637.2.2.3606.1.23 | INTEGER | read-only | PSOS Ticks elapsed |
| INT taskStatsTableTicksPerSecond | 1.3.6.1.4.1.2637.2.2.3606.1.22 | INTEGER | read-only | PSOS Ticks per second |
| INT taskStatsTableTotalTime | 1.3.6.1.4.1.2637.2.2.3606.1.45 | INTEGER | read-only | Run time for all in miliseconds |
| STR taskStatsTableWaitObjectName | 1.3.6.1.4.1.2637.2.2.3606.1.21 | DisplayString | read-only | Name of object task is waiting on |
| INT timerStatsActiveCount | 1.3.6.1.4.1.2637.2.2.3601.1.204 | INTEGER | read-only | Total number of timer entries currently active |
| INT timerStatsActiveMax | 1.3.6.1.4.1.2637.2.2.3601.1.205 | INTEGER | read-only | Maximum number of timer entries active |
| INT timerStatsAllocFails | 1.3.6.1.4.1.2637.2.2.3601.1.302 | INTEGER | read-only | Number of timer allocations that failed |
| INT timerStatsAllocSuccesses | 1.3.6.1.4.1.2637.2.2.3601.1.301 | INTEGER | read-only | Number of timers successfully allocated |
| INT timerStatsCardType | 1.3.6.1.4.1.2637.2.2.3601.1.2 | INTEGER | read-only | Type of card reporting timer information |
| INT timerStatsCPUNumber | 1.3.6.1.4.1.2637.2.2.3601.1.3 | INTEGER | read-only | CPU number (0 = main CPU, 1..n = IOP) |
| timerStatsEntry | 1.3.6.1.4.1.2637.2.2.3601.1 | not-accessible | This is the structure of entries in the timerStatsTable. | |
| INT timerStatsFreeCount | 1.3.6.1.4.1.2637.2.2.3601.1.202 | INTEGER | read-only | Total number of timer entries currently unused |
| INT timerStatsFreeFails | 1.3.6.1.4.1.2637.2.2.3601.1.304 | INTEGER | read-only | Number of timer frees that failed |
| INT timerStatsFreeMin | 1.3.6.1.4.1.2637.2.2.3601.1.203 | INTEGER | read-only | Minimum number of timer entries unused |
| INT timerStatsFreeSuccesses | 1.3.6.1.4.1.2637.2.2.3601.1.303 | INTEGER | read-only | Number of timers successfully freed |
| INT timerStatsSlotNumber | 1.3.6.1.4.1.2637.2.2.3601.1.1 | INTEGER | read-only | Slot number |
| timerStatsTable | 1.3.6.1.4.1.2637.2.2.3601 | not-accessible | timer stats | |
| INT timerStatsTimerEntrySize | 1.3.6.1.4.1.2637.2.2.3601.1.101 | INTEGER | read-only | Size of each timer data structure |
| INT timerStatsTimerMemorySize | 1.3.6.1.4.1.2637.2.2.3601.1.102 | INTEGER | read-only | Total amount of memory used for timer entries |
| INT timerStatsTotalCount | 1.3.6.1.4.1.2637.2.2.3601.1.201 | INTEGER | read-only | Total number of timer entries created |
RFC description
Monitors clock status and clocking sources on Nortel Aptis network equipment. Includes internal and external clock synchronization tracking.
Start monitoring Nortel Networks Aptis DSL concentrator/access multiplexer (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.